Ubuntu :: Printing - Print Job Shows The Printer Status As "idle" And The Print Queue Is Empty
Jul 15, 2011
Our one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.
View 9 Replies
ADVERTISEMENT
Jun 15, 2011
My elderly HP Laserjet 4P has worked well for over 15 years. I have it connected to the home network via a Trendnet TE100-P21 Print Server, and setup has always been straightforward and easy. The whole setup has worked quite well with Fedora 9 or 10 thru 14, but then stopped working within the last couple of weeks. I'm assuming an update broke something, as I can find no other reason. When I send a print job or test page, I get a Print Error dialog. The print que shows a "stopped" status for the job. In the Error dialog I use the Diagnose button and step through until I get the Status Messages dialog, which informs me: "The printer's state message is: 'Data file sent successfully'".
Then I enable debugging and send a test page. Stepping through the dialogs it tells me it cannot detect a problem, and gives me an error log, which I've attached. The Trendnet server has a web admin interface. In that interface I can send a test page successfully. Also, I can open a VirtualBox (Windows XP) in Fedora 14, and successfully print from it. My print setup in Fedora is the same as it has been for several years now, and nothing has changed on that end. I have rebooted Fedora and the Trendnet server. All other computers/OS's on the network have no problem printing, only this Fedora 14, and only recently.
View 1 Replies
View Related
Apr 3, 2011
CUPS was not originally installed on my server, I have installed it but cannot print to my network printer. On my laptop, I can... they are both running the same version of Debian. What could be missing?
Here are some details...
I have two computers running the same version of Debian. One is a server with no GUI and the other is my laptop with GDM installed. My laptop (which prints with no problem) is connected via Wifi. My server is connected directly to the router via Ethernet. I cannot print from the server.
The printer is a Canon Pixma MP495 that connects to the router via Wifi. I have downloaded drivers for the printer from [url] and installed them successfully using dpkg on both computers.
Right now I have a regular text file that I am using for a test page. To print from my laptop (with success) I type:
Code:
This does not work from the server. What could I be missing?
lpq run on server:
Code:
lpinfo readout:
Code:
View 14 Replies
View Related
Jul 1, 2011
I need to check if I've printed a document. For what I've been reading, going on [URL] and clicking on "Show completed job" should do what I need to do, but it says "No jobs".
View 1 Replies
View Related
Aug 22, 2010
my ERP is sending multiple xml files to my queue and printing daemon reads each files and send it to windows printer (queue) where another software that uses each file and prints one document at a time.I would like to control first part when ERP send XML file I would like printing daemon to send files to windows queue in order the files came in from ERP. Currently it send it in random order. (i think it's based on how fast it can process, size of file..ect)
View 5 Replies
View Related
Jun 10, 2010
My Printer Brother DCP-8045D only prints, when I send the computer (Lenovo X200) to suspend (or shutdown) and wake it up again, whilst a document is in the printer queue.
View 2 Replies
View Related
Feb 16, 2011
I'm running Kubuntu 10.10 with a Laserjet 5M printer. When I attempt to print a job from Firefox or from Okular, the job never gets onto the print queue. However, I can print test pages on the printer and also print from OpenOffice, so this seems to be app-dependent. I know the jobs aren't being queued because the job number doesn't increase (as shown by the jobs for the test pages). Both Firefox and Ocular give every indication that the print job has been processed correctly.
View 1 Replies
View Related
Nov 11, 2010
After it tries to print and nothing happens this shows up stopped. Idle- /usr/lib/cups/filter/footmatic-rip failed.
View 2 Replies
View Related
Mar 23, 2011
Interesting problem: For the first time with Xubuntu 10.10 64bit, I am finding certain applications print corrupt. A varying amount of letters / numbers either get substituted/print a blank space/ print a box etc etc. This corruption seems to happen from a Pdf ( evince ) or Spreadheet ( Gnumeric ) Opening the same Pdf on another machine (ubuntu 10.10 32bit) prints perfectly. Opening the same .xls file on the original computer but using OOo Calc prints perfectly.
I guess I have ruled out any problems with the printer itself or the network JetDirect box. I have re-installed CUPS and evince and upgraded to the latest version of HPLIP but the problem appears unchanged.
View 2 Replies
View Related
Jun 5, 2011
I cannot print pdf files. I have tried using okular and xpdf. The documents display in the program, but print preview shows a blank page. The printer then sends out blank pages. I have tried printing on 2 different printers using usb cables. Using terminal to process the commands shows error:
Quote:
xxx@xxx:~$ xpdf
***** MediaBox = ll:0,0 ur:611.976,791.968
***** CropBox = ll:0,0 ur:611.976,791.968
***** Rotate = 0
Segmentation fault
Converting to .ps also is blank.
View 6 Replies
View Related
Dec 6, 2008
I initially had a problem accessing the CUPS interface (see my other post) and got that resolved by adding the user "cupsys". Now, everything "looks" ok, and when I print a test page, it shows it as completed (in CUPS). However, the page never prints.
The printer is a Canon MP600 (using the canonmp600en.ppd file to configure it). Here's the output of my conf file.
Code:
# Show troubleshooting information in error_log.
LogLevel debug
[code]...
View 8 Replies
View Related
Oct 23, 2010
I have Canon MF4150 printer. I have downloaded Linux Printer Driver (UFR II) Ver.2.10E from canon asia site. Adding the printer and printing work fine, except that after one printing, the printer stops working. There is no error message./var/log/cups/access_log shows
Code:
localhost - - [23/Oct/2010:19:53:55 -0500] "POST /printers/Canon-MF4100-Series HTTP/1.1" 200 45240 Print-Job successful-ok
[code]...
View 1 Replies
View Related
May 21, 2011
After installing libre3.3.2 using the Slackbuild scripts, I found that it displayed fonts correctly, but doesn't print the same font on the printer. The output of the printer should be Arial, but is instead some elongated, overlapping mess.
The same Slackware package installed on SW13.1 prints normally. (Same computer, different partition)
Spadmin used to control the printer fonts, but apparently not anymore.
System: Linux nadrek 2.6.37.6-smp #2 SMP Sat Apr 9 23:39:07 CDT 2011 i686 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ AuthenticAMD GNU/Linux.
View 14 Replies
View Related
Dec 26, 2010
My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies
View Related
Jul 20, 2009
I have a FC11 box, with an HP prineter attached. I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5. I am not sure what is missing. when I tried to print from the XP box I got "Test pge failed to print" error.
View 9 Replies
View Related
Mar 27, 2011
Since I changed my System from openSUSE 11.3 x86_64 to openSUSE 11.4 x86_64 my printer (Samsung ML-2850 via USB) seizes to function (clean installation). The printer connects to two machines via a KVM-switch. On the other machine (Windows 7 x64/Windows XP x64) the printer is working fine. This did not change when I switched the Cables/KVM-ports. In addition, when I was using openSUSE 11.3 x86_64 the printer also worked fine. All necessary CUPS-packages are installed:
[code]...
View 6 Replies
View Related
Dec 13, 2009
I installed SuSE 11.2 64-bit on a new computer without any printer attached. When I read the manual for the mainboard, I discovered to my delight that it actually has a parallel port, it's just not connected. I moved the cable from an old desktop and put it into my new desktop. After enabling the port in the BIOS setup, the Hardware Information dialog in yast correctly shows that I have a HP LaserJet 1100 (/dev/lp2).
How do I configure the printer? "Printer" in yast tells me "There is no print queue". When I click "Add" yast tries to detect a printer and gives up with the message "No connection selected". I can't add a selection, however. "More connections" gives me the exact same error message. The "Connection Wizard" allows me to select "Parallel Port", but then complains about missing connections again. The cups demon is running. I don't have /dev/lp2, is that the problem?
View 9 Replies
View Related
Jan 24, 2010
have a big print job sitting in the queue which I don't need (the print job that is) .. QUESTION: how do I clear the print queue in Ubuntu 8.04
View 6 Replies
View Related
Aug 23, 2010
The Gnome Print Manager found the printer with no problems. The correct driver was available - so I installed it. The printer shows up when called by a print job I want to send. The queue pretends to process it. The queue states "completed." Then Nothing comes out of the printer. XP shows the print job as pending. Still nothing comes out of the printer. And I can't delete the job from the Ubuntu queue (because that lying SOB tells me the job is completed). I can't print from XP to that printer until I delete or cancel the Ubuntu job (from the XP queue) - or clear the XP print queue (by deleting spool files). Permissions on that printer are not an issue. Printing from Ubuntu to that printer worked OK on earlier versions of Ubuntu.
View 1 Replies
View Related
Mar 28, 2010
I have 2 printers plugged into a Windows XP PC (an Epson Stylus Photo RX580, and an HP Laserjet 1020) with full sharing on and everything, and is shared with other Windows PCs via the network I have set up. It has worked perfect. But today I added a PC running Ubuntu 9.10 and and can't figure out for the life of me what I am doing wrong. I installed both of the printers via the GUI in Administration, and both of them are detected and Ubuntu says they're working. But when I put something in the queue to print it stays there with the status "pending".
View 8 Replies
View Related
Apr 16, 2011
I am running CentOS 5.4 with CUPS v1.3.7 and have a Brother printer (MFC-5895CW) that connects wirelessly to a SonicWall device. The SonicWall is hardwired to my PC. I have found that periodically, the printer queue will become disabled and the only way to re-enable it is to issue a cupsenable command.
I believe that queue only gets disabled if the wireless connection drops in the middle of a print job. I've tried dropping the wireless connection and then bringing it back up when no print jobs are active or pending and the queue is fine for the next print job that is sent when the connection is up.
I did a little research and found that my version of CUPS contains support for an ErrorPolicy setting in the printer.conf file that may prevent the print queue from being disabled. I'm hoping that if I change the default value from "stop-printer" to "retry-job" that this will prevent CUPS from disabling the print queue and requirring a cupsenable command to re-enable the queue.
I don't want to play around with scheduling cron jobs to enable the queue.
View 3 Replies
View Related
Jun 16, 2010
I have no idea what's going on. I've had this machine running for over a year, and it's been great. A month or so ago, I realized that jobs weren't going to the printer. When i VNC'd in, I noticed that print jobs would show up in the queue as "Processing" briefly, then disappear.
lsusb:
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
I've even reinstalled the OS (not just for this reason) to no avail. Printer is dete cted without issue, I just can't use it.
View 6 Replies
View Related
Jul 26, 2010
I'm running openSUSe 11.3 on a laptop and the printer is connected to my desktop which is running Windows XP. I have the printer and several folders and drives shared. I can see the folders and drivers on my laptop but I cannot get the printer to actually print. It is an HP printer but I am not using HPLIP. I can send a print job to the queue and the printer resets itself like it's going to print but nothing else happens and the print job just sits in the queue until I hit cancel and restart then printer.
View 9 Replies
View Related
Jun 8, 2010
We have a lpr server for printing (not CUPS for compatibility with complicated domain/systems). We configured our linux systems -- RHEL4, RHEL5, and Ubuntu 10.04 -- so that lpr is one of the gtk print possiblities by adding 'gtk-print-backends = "lpr,pdf,file"' to gtkrc. This works great for several gtk-enabled applications like Acrobat Reader (acroread).
However, Firefox 3+ (tested 3.6.3 & 3.0.19) doesn't actually queue any lpr jobs until after quitting the application.
View 1 Replies
View Related
Dec 26, 2010
Is there some cheque printing software out there I can use to print my own cheques?
View 3 Replies
View Related
Feb 16, 2011
I have a problem with a network printer: every document I try to print it goes in the printing queue and there its status stays "pending" forever. Where could be the problem or where can I find clues to solve it?
View 1 Replies
View Related
Jul 20, 2011
Can someone please describe what the header and footer feature does in the print screen print/options?
View 1 Replies
View Related
Aug 8, 2011
My PDF's won't print anymore. They used too, but now all I get is a message that says, "document failed to print". Office docs print fine on the Canon Pixma i4300. I installed the CUPS PDF driver but it doesn't help. Acrobat won't initialize reliably in Firefox 5.0.
View 2 Replies
View Related
Nov 7, 2010
I'm running Mint 9 as my main network and my wifes Acer Aspire 5610 running Windows vista. My problem is that I can't print from vista. It prints a test page just fine but when I tell it to actually print a document, the status says: "Access denied, unable to connect" I have 2 printers connected and they installed fine in Vista one is a HP LaserJet 2100 series and the other is an HP Photosmart C5280. Like i said, they both print the teat page just fine.
View 9 Replies
View Related
Mar 22, 2010
I recently built a server from an old box using Ubuntu Server 9.10. This is my first server and I am very new to the server world.I have an Epson Stylus NX400 connected via USB. I have managed to configure it to the point where I can see the printer listed on my client laptop and can print a test page. However, I cannot print anything else. When I access the job history through the CUPS adminI can see that the print jobs were recognized and marked as complete, even though the printer never physically engaged.
View 4 Replies
View Related
