SUSE / Novell :: Local Raw Printer Fails To Print
Nov 29, 2008
After the kernel updated to version; 2.6.25.18-0.2 and I edited my grub boot file, and the printer driver shows as; Local Raw Printer, it fails to print. With SUSE 11.0, KDE 3.5.9, on a 2006 Gateway AMD Athlon desktop computer, using a Canon PIXMA MP500 multi-function inkjet printer connected USB, when I attempt to print a page, it shows as if it is functioning fine, but nothing happens, and no error messages.
View 2 Replies
ADVERTISEMENT
Apr 29, 2010
is there any way to find out whether a disk is attached to the server locally or from the SAN Box .
View 4 Replies
View Related
Feb 8, 2010
I got this setup:
- Asus M2N32, Athlon X2, 4G Ram, Raid 5
- dom0 on lvm, boots always
- tried to create a domU using dirinstall
- creating a volume lamp in group VGsys with 5G and ext4
- mount /dev/VGsys/lamp /var/tmp/dirinstall
- yast dirinstall: fails when calling dirinstall_finish
- tried to create a domU using vm-install
- creating a volume lamp2 in group VGsys with 5G and ext4
- vm-install fails too
- tried to make an image on susestudio, successfully, but that does not boot, failing when trying to mount the rood partition
- copied the dom0 image to a domU disk
None of these domU booted sucessfully, all of them showed the following messages:
- kernels used 2.6.31.8 and kotd 2.6.31.12 give same results
I am told to disable scsi subsystem in the kernel, I have compiled a kernel before, but
1) I cannot believe I am the only one having this issue or I miss something truely obvious (then what do I miss, please?)
2) dirinstall and vm-install worked in 11.1, there were issues, but recoverable, why now not in 11.2?
View 1 Replies
View Related
Aug 25, 2010
I have an Intel MB (855GME with 6300ESB) that I'm having trouble installing OpenSUSE 11.1 onto the IDE drive. It will install to a SATA drive but for various reasons I need to install on IDE (PATA on 6300ESB). The install fails to find any ide drive (I know the drive/interface works because I can install XP on this same ide drive and boot from it). If I parse the dmesg output I see the message "ata_piix 0000:1f.1 device not available because of BAR 2 (0x0-0x7) collisions". I'm trying to determine if there's some workaround for this. I've tried various kernel parameters and no joy.
I've tried Ubuntu with similar results. Older kernels WILL install onto this same MB/PATA controller (Ubuntu 6.06, 2.6.15 and RHEL4) so it seems that something changed in the ATA driver as the kernel has matured and my bios isn't up to snuff for these pickier drivers.
View 2 Replies
View Related
Aug 11, 2009
my epson printer on my system consists of: ASUS A8N32-SLI DELUXE. THE printer CX8400 using usb port does not print it, only spools out paper with suse 11.1
View 4 Replies
View Related
Nov 25, 2008
I have a OpenSUSE 11 machine set up as a domain controller. I have set my printer up to be shared to Windows machines logging into the domain. I was able to install the printer to my Windows machines. When you go to the printers folder in Windows, it shows the printer but says "access denied" instead of the usual "ready". If I print to the shared printer the job will go through. I am thinking it is an authentication issue because if I log into Windows machine as "root" and let it build a profile, the printer doesn't show the "access denied" message. How do I allow other users to have access to the printer?
View 1 Replies
View Related
May 23, 2010
I recently installed 10.04 and unable to print to local or network printer?
When I go to System Admin/Printing to add my printers, screen says I am not connected to localhost and I am unable to use Add printer. When I used version 9.10, I added a network + a local printer by this method but I'm not sure what I have done wrong this time around.
View 1 Replies
View Related
Dec 30, 2010
In Ubuntu 10.10, I have my printer, an Epson D120, shared. I can print from the computer itself, but other computers cannot print to it. Both Ubuntu and Windows machines have the printer successfully installed. They can access it, I can access CUPS from all these machines and the the job queue even reports the jobs sent from these computers. But the page count is unknown and nothing is printed, although it says the job is completed.
I'm quite desperate to get this to work. It would suck if I need to go back to Windows just because some minor thing goes wrong. I really don't understand why local prints are OK, but prints from the network are not working.
View 2 Replies
View Related
Jan 28, 2010
OpenSUSE is starting to drive me a bit nuts. Actually what I'm trying to do is simply install VMWare server on a recent as possible SUSE and run 2 virtual machines, both the same SUSE. Of course 11.2 32 bit doesn't run VMWare server 2 so it's back to 11.1. The trouble is, 11.1 won't install properly on my PC.
The install process, booted and installed from the 11.1 network install iso image on CD, runs fine. The PC reboots from hard disk and stops at the grub prompt. I've tried the auto-repair option and reinstalled it from scratch a second time always with the same results. It seems the root partition is hosed, and that's where my understanding hits its limits. Can anyone help?
Incidentally should anyone be able to advise on the VMWare conundrum I'd also be interested. Maybe in another thread...
View 6 Replies
View Related
Oct 31, 2010
We have a SuSE/SLES 9 server that boots from a fibre channel card, using volumes from a NetApp filer.
We previously had the server booting from the LUNs on the filer, but after some tinkering around with the fibre channel BIOS, we have the situation where the LUNS seem to be mounted, the OS boots, starts to initialise everything but then stalls, saying:
We have tried loads of combinations of settings in the BIOS and fibre channel BIOS without any success or any idea what may have caused the error.
View 4 Replies
View Related
Jul 27, 2010
yesterday I upgrade my opensuse 11.2 to 11.3 with zypper dup. Today I try to print something but printer doesn't react for page nor test page. On 11.2 it works perfectly. I have samsung ml 1640 connected directly to PC via usb.
output from cups:
Description:OpenBlackBox v mojom rume
Location:Moj rum
Driver:Samsung ML-1640 Series (grayscale, 2-sided printing)
Connection:usb://Samsung/ML-1640%20Series
Defaults:job-sheets=none, none media=iso_a4_210x297mm sides=one-sided
View 3 Replies
View Related
Feb 1, 2010
when I opened /etc/updatedb.conf it says there in the file that one should make ones own updatedb.local. But how, exactly? Presumably I create /etc/updatedb.local but what do I put into that? With all those $-signs I'm pretty much lost. Could anyone post his/her example of a PRUNE_FS statement or point me to some reference where I can read up on this
View 10 Replies
View Related
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
Jul 20, 2010
I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
View 4 Replies
View Related
Nov 18, 2010
I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
View 4 Replies
View Related
Jul 5, 2009
OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
View 2 Replies
View Related
Sep 8, 2010
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies
View Related
Sep 16, 2010
how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies
View Related
Nov 4, 2010
I have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
View 4 Replies
View Related
Aug 23, 2010
I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
View 2 Replies
View Related
Feb 1, 2010
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
View 3 Replies
View Related
Oct 13, 2010
PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/KDE:/KDE4:/Community/openSUSE_11.2/' My 11.2 won't update and gives this error. Anyone know how to fix it?
View 2 Replies
View Related
Jul 19, 2010
New Suse 11.3 installation with Gnome desktop. Added K3B using Yast2, and after completing the install of K3B, there is no icon for K3B! Instead there is an "X" and the text for K3B in it.From the main menu -> more applications -> multimedia, is where the K3B icon is.Yast2 is supposed to install any dependencies needed or warn if it can not find any missing dependencies. What is missing, or is it a permission problem? All the other application icons seem fine.
View 4 Replies
View Related
Dec 26, 2010
My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies
View Related
Feb 4, 2010
The software use to work well here, but now I got this when I try to run it
sparky: error while loading shared libraries: libtk8.4.so: cannot open shared object file: No such file or directory
But I can not find it.
I also tried
cd /usr/lib
ln -s libtk8.4.so libtk.so.0
ln -s libtcl8.4.so libtcl.so.0
but this does not work neither.
View 4 Replies
View Related
Jul 15, 2011
Our one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.
View 9 Replies
View Related
Jan 6, 2009
Recently my computer was infected by several viruses and my brother cleaned it up and installed SuSe for me. He also put windows xp back on my system for our children. I am having a terrible time installing our Dell 924 printer. I have it installed for windows, but cannot get it to print for my Linux system. What am I doing wrong? Can anyone give me some direction?
View 5 Replies
View Related
Oct 25, 2010
I have been searching for 2 days and cannot find an answer. Apparently Sax2 isn't available in 11.3. It looks as if many are having the same difficulty. I've tried xrandr and tried to edit /etc/X11/Xorg.conf with no success.Copying a working xorg conf file might be a fix, I don't know.
View 8 Replies
View Related
Oct 4, 2010
I use Termlite from SCO as my terminal emulator. It works on SUSe 9.3 but i can not get it working on 11.3. How do I enable the networking for this in SUSE 11.3.
View 1 Replies
View Related
Nov 19, 2010
to get flash 10 working. I just decided to update to 11.3. Bought a 8.0GB USB stick to copy files to. USB DISK icon on visible on Desktop. mounted on /media/USB DISK Clicking on device properties it is read only. I can change permissions but that is only temporary. Looking under my computer it is formated as vfat device name is /dev/sdb
I can't copy any files to it. Can't see in terminal even being root as well. Almost started the Partitioner in Yast but didn't want to accidently crash the system. That WOULD be my luck Can't find a way to format it via GUI interface. Can I use something like fdisk in terminal. I guess I need to format it as ext3.
View 7 Replies
View Related