the remote printer appears in cups but if I try to do a test page i get a page not found error. it even says ready under yast printers.it is set up on a remote desktop using cups
View 8 RepliesI have a Windows print server (Win XP SP2) and a 1 opensuse client. I have setup cups as per the following document:
Printer Sharing: Windows Print Server for Suse/openSUSE Linux Clients [Samba and LPD]
I am not using Samba. The setup went fine, but I am not able to print to it. There are other clients (all Windows) that are printing fine to this print server. The following is what I see in the /var/log/cups/error_log:
[Job 3] recoverable: Unable to connect to printer; will retry in 30 seconds...
I am using DHCP in this LAN. Ping is working fine (client's hosts file updated with the print server's ip address.). This looks like a networking issue.
I recently installed 10.04 and unable to print to local or network printer?
When I go to System Admin/Printing to add my printers, screen says I am not connected to localhost and I am unable to use Add printer. When I used version 9.10, I added a network + a local printer by this method but I'm not sure what I have done wrong this time around.
I am hard time printing to one particular Canon IR8500 printer Red hat.WE are using CUPS to manager around 30 printers.when I try to start the printer from CUPS, it comes back immediately to Printer State: Stopped, accepting jobs..After I delete it and redefine it, the status says Idle, but as soon as I submit a job, the status change to 'Stopped'.
View 4 Replies View RelatedOk have setup my printer under suse 11.3 just fine and printing perfectly, and have added the printer to a windows 7 client, but had to get the disk to install the windows driver. Is there any way that i can put the windows driver on the linux machine so that when i go to a windows client and want to add the printer, i can just connect to the printer and the windows driver will be installed over the network like it does with windows servers?
View 4 Replies View RelatedCan CUPS print to a color printer? And also do I need a GUI running on my computer in order for CUPS to work?
View 1 Replies View RelatedWhen I try to print something there is only some led blinks on printer and nothing is print. I am using drivers from brother(cupswrapper). I am using CUPS 1.3.11. I didn't have any problems on my previous installation of slackware(but I don't know which driver I've used).
View 11 Replies View RelatedI want to setup my Epson Stylus (515W)-A letter before the 5 but not sure what. Basically when I open CUPS I click on add on new printer, I enter add printer but then the page says access denied. Also this is a network printer.
View 2 Replies View RelatedI have a mail-account, which is checked every 10. Minute for new mails (via getmail), printed(via cups/lpr) and the file is deleted if successful.
My problem is that I dont want to print the texthtml, but what it looks like when rendered.
What is the best way of doing this ? html2ps or ?
Is it also possible to print the attachments( PDF) inside the mail, this way ?
I have Rechat FC4 with CUPS 1.45 and a Dlink DS-802 Print Server.
I have installed CUPS, and pointed it at the DS-802,
but no joy.
Windows already prints to the 802 via a W2k3 server, so that works fine. FC4 with CUPS seems to point at the 802 but print jobs from localhost (just go to the print queue, and there they stay.
Windows continues to function fine, but linux wont send to the 802. Also, if Windows users try to print to the CUPS shared printer, it shows "No Accesss".
I have a FC12 machine installed with CUPS and a CUPS-PDF printer. Printer are shared and works fine with this URL:
[URL]
I have both client machine Windows XP and Windows 7. Both has setup the above printer and print fine without any problem. I can get the PDF file from windows test print. The only problem is I face is wait for around 20 seconds for printer dialog prompt out when I press print button in Windows 7. However, my windows XP never t have this problem. The printer dialog prompt out immediately when I press print button.
Does anyone know how to set up an print-to-file-printer with an alternative system to CUPS? The quality suck on CUPS and there's NO solution, at least i didn't found anyone
View 3 Replies View RelatedTrying to print from my laptop to friends wireless printer. I see his printer "7600 Series" in Network - File Browser. How do I print to his printer. I have text document. I click on "Print", but only "Print to file comes up".
I did System -> Printing -> Help -> Troubleshoot
Got: CUPS Service Stopped
The CUPS printer spooler does not appear to be running. To correct this choose
system -> Administration -> Services
There is not "Services there"
What to do? Ubuntu 10.04 LTS
Using openSUSE 11.4 and winXP pro sp3I am a complete noob to linux.I went into YAST2 and added a printer--none were found. I used the connection wizard and selected Print Via Print Server Machine>>Windows or Samba.i entered the winxp info
server: daddy
Printer Share Name: HP4200
Workgroup: MSHOME
[code]...
I noticed that a bit after I had updated Ubuntu 10.04 through the Update Manager, I couldn't print at all! (I run ubuntu 10.04 on my laptop and have a networked HP Officejet 6110xi all-in-one printer connected to a comp running Windows XP home on the same LAN). Everything works when I boot up in windows vista, so the problem is definitely in Ubuntu.
First, I checked the printer jobs and it said that there was an error with a filter or something. Restarting the job didn't do squat, so I decided to try reinstalling my printer, but get the same CUPS error "error-client-not-possible" right after I click "Apply". I then Googled the issue but didn't find much of anything, so I thought I'd try reinstalling CUPS. No luck there either... Same error again and again.
My setup is like this: i have a small office network and i bought yesterday a new multifunctional printer Samsung SCX-4521F. It is shared with samba and connected to the server with USB. In the network everyhing works well, users can log on to the domain, print from windows to the new shared Samsung printer and i even managed to enable network scannin. But when i try to print from MS DOS i wont get a single page. We have an accounting program in dos. All the other computers are XP Pro SP3. My server is running for 2 weeks the newest CentOS with all updates. I'v maped the network printer in windows witht the command "net use LPT1 \ServerSCX-4521F. I get a message that maping was completed succesfully. If i start a print job nothing happens. "Printing" or "warming up" flashes several times on the printer and thats it.
CUPS error log:
I [02/Apr/2009:00:03:45 +0300] Adding start banner page "none" to job 125.
I [02/Apr/2009:00:03:45 +0300] Adding end banner page "none" to job 125.
[code]....
My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies View RelatedI've got 11.3 Gnome on my lenovo desktop and I'm trying to connect an Epson Workforce 610 via a wired network. I installed the driver from AVASYS and Linux Standard Base in accordance with instructions. The printer is found on the network but I still can't print.
View 9 Replies View RelatedPrinter is connected via USB to server PC running OpenSUSE 11.1 Client PCs are running 11.1, XP, Vista No problem printing from the Windoze machines
Printing is trouble free with the 11.1 client's firewall disabled, but no printer is available with firewall running.
In hopes of diagnosing the problem I figured I'd open everything I could think of until the printer remained available with the firewall running. Then I planned to start removing exceptions one at a time 'til removing one caused the printer to disappear.
I've gone to Yast>Security and Users>Firewall>Allowed Services>External Zone and tried addingSamba Server
NetBIOS server
Samba Client
Samba Server
VNC
[Code]....
I am currently attempting to attach my printer to my fresh Debian installation and get CUPS running with it. I was able to add the printer easily enough, but when I try and print a test page from the web interface, it fails, and I see the following in the log.
Code: Select allD [08/Apr/2015:21:31:45 -0700] [Job 6] PPD uses qualifier 'Gray.OFF.600dpi'
D [08/Apr/2015:21:31:45 -0700] [Job 6] Calling FindDeviceById(Samsung_ML-1710)
D [08/Apr/2015:21:31:45 -0700] [Job 6] Failed to send: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
D [08/Apr/2015:21:31:45 -0700] [Job 6] Failed to get profile filename!
[Code] .....
Im trying to set up a print server using Fedora 12 and CUPS.
It recognized the printer, and i can print from the linux box. When i try to install it on my Win 7 64-bit box i can install the printer itself by giving it the IP address and port number of the linux box but i cant sent anything to it to print. I apologize im a little rough on the details, im not at home right now. I believe the printer i have is a HP PSC 1500. I opened the cups port on the linux firewall, and i shared the printer through the cups admin browser page.
I have an ubuntu server (9.04) that needs to share a printer (a Brother 2070N on USB). To configure cups, I had to modify cups.conf quite a bit to let me access the printer management pages, but I did get it working. I can print using the lpr command, as well as print test pages using the management interface's "Print Test Page" button from any computer on my network. However, I cannot actually set up Ubuntu, Fedora, Vista, or OSX to see the network printer, and it's driving me insane.Brother from any computer on the network I can see the specific printer management page, but no computer can actually print to the printer (other than using the "print test page" button)
View 2 Replies View RelatedI just recently bought a WinStar USB LPR Network Print Server so that I could connect my printer to my network so all the machines on my network could print, and everything would be OS independent. The problem I'm having is that I can't get CUPS to connect to the printer. It either never prints anything, saying that the printer is not connected, or saying that LPR is spooling the job, but it never completes. I've been configuring it as a network printer in CUPS, and trying all the different configuration options to no avail. The print server is located on http://192.168.1.103 and is pingable. The print server I have is this one:
WinStars Networking USB LPR Print Server
What is the correct way to set up a print server like this so I can print to it?
I have installed my Konica Minolta mc 2430dl printer (opensuse 11.2 x64).
View 2 Replies View RelatedI am demo'ing Kubuntu 9.04 workstation to a customer. He has a CentOS 5.3 server (my doing). On it is our CUPS Network file server. Everyone (65 of them) print to our network printer through it using LPR/LPD (and sometimes Samba).
Problem: when Kubuntu's Print Configuration Tool went looking for printers, it found every network printer's IP address, but missed my CUPS printer server. What did I do wrong on one or both ends (I have control over both).
I'm using Debian squeeze and for an assignement, i have create 2 virtual pdf cups printers. Both are working very well. To test the different administion command; i try to disable one of the printer and move his queue file to the second one. I'm able to do it easily.
Now, i wish to write a bash script that wil test the status of the printer. So that,if the printer is disable, it just execute the "move" script. Is there a way to know the status of a cups printer and use that information in a script?
For example, a command/function that can return "O" is the cups printer is enable and "1" if not.
I cannot navigate my windows network because of a unresolved issue.
see http://ubuntuforums.org/showthread.p...8#post11131098
The workaround is to use the IP address of the computers.
Problem is that CUPS has the printer address with the computer name as opposed to IP addresses.
CUPS will not let me manage the network printer. It asks for a user and password. My sudo name and password dont work.
I think the solution lies in the cups.conf but I am unsure how to fix it so that I can manage the printers.
I've been at this mess pardon my french for a few hours and i'm still going nowhere, original thread posted over at archlinux forums:Since my printer isn't visible on my server (works just fine on my client) I tried to manually add various URI (tried em all) and I went from "printer location not found, waiting for jobs, to printer isnt running".
In my opinion it should be working but it's not, i've read the linux printer database/various linux forums/#cups on freenode (idled for 2 days no response)/gentoo wiki/forums and the old tool "google" but most of the "hacks" I tried didn't work.There's a lot of google links with issues similars to my own and alas they are all unresolved, is this a typical problem with unix/CUPS over servers/network?Why is it so difficult for CUPS to detect my printer over my server?
Is it possible to use CUPs to share an already networked printer using IPP? The printer itself uses IPP.I know at first look this may seem like a silly thing to do, however I have a special case to set up a "print proxy server" due to security compliance reasons
View 1 Replies View RelatedI have a printer configured on my Ubuntu server using CUPS amd made it available to the local network. The printer is recognized on my other Ubuntu machine without any problems.
But on my Suse laptop, the printer is not recognized. Using the YaST printer Configuations, I choose the option "Recieve Printer Information from Remote CUPS servers. But no printer is found.But... when I choose Do All Yout Printing Directly via One Remote CUPS server and enter the correct IP address (192.168.1.100), the printer is found andI am sure the printer info is broadcasted because it shows up on my second Ubuntu PC. But why is it not recognized by default on my Suse machine