Networking :: Not Able To Access Network Printer Access Denied?
Aug 4, 2009
I have a linux domain (FEDORA CORE 1) and two laptop's which are part of my domain with windows xp pro service pack 2.I have given two ip's to both the laptop's being primary as global and secondary as local.I have configured printer in one laptop and shared.Till last week i was accessing that shared printer from my other laptop and every thing was working fine.Last week i formatted one laptop,(which dose not have shared printer) from then onwards i am not able to access my other laptop. I get the following message when i try to accessmy other Laptop,"you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permission there are currently no logon servers available to service the logon request"P.S : If i have only local IP i am able to see both the systems and i am able to access my printer, this problem comes only when i add global IP to both the machines.And also i have stopped the firewall and other things.
View 1 Replies
ADVERTISEMENT
Mar 31, 2010
I have a network drive setup on windows to a samba share that is on ubuntu 9.1. The folder im connecting to has a couple symbolic links setup and all of them give me an Access denied error when I try to open them. I have dont everything I can think off including chowning all the folders to the user that Im logged in as and doing chmod 777 on all folders and files. I have tried deleting the link and recreating it and nothing works. This was working fine a few days ago and now it doesn't.
View 2 Replies
View Related
Sep 22, 2010
Using Ubuntu 10.04
I am trying to use the network printers shared within my University's AD domain. In Windows XP, I simply went to 'run' and typed "\[domain]", then it asked for my ID and passwords and list of printers came up from which I could just pick and add to my printer list. How can this be achieved in Ubuntu 10.04?
What I tried:
System->Administration->printing->Add->Network Printer -> Windows printer via Samba -> Browse, then I see the domain but when I input my id, domain name and password, access is denied...
View 5 Replies
View Related
Jan 23, 2011
I recently installed Xubuntu 10.04 on a desktop computer. Everything works fine aside from the fact that I can't access my Dell 3010cn network printer. The printeis accessible and work flawlessly with every other computers running XP, Vista and Ubuntu 9.10I installed the drivers and configured the printer with the exact same parameters as on my 9.10 laptop. The thing is that the printer is always "offline" as if my computer could not connect to it. Also, when I try to acces its options via its fixed IP adress (192.168.1.107) through Firefox, I cannot reach the printer. However, the printer responds to every other computer in the house.What am I doing wrong? Is there a firewall in 10.04 that keeps me from accessing to the printer?
View 1 Replies
View Related
Nov 25, 2008
I have a OpenSUSE 11 machine set up as a domain controller. I have set my printer up to be shared to Windows machines logging into the domain. I was able to install the printer to my Windows machines. When you go to the printers folder in Windows, it shows the printer but says "access denied" instead of the usual "ready". If I print to the shared printer the job will go through. I am thinking it is an authentication issue because if I log into Windows machine as "root" and let it build a profile, the printer doesn't show the "access denied" message. How do I allow other users to have access to the printer?
View 1 Replies
View Related
Mar 26, 2010
I'm having a problem with my webdav share. I have a secure webdav folder that gets accessed via a non-standard port and requires basic authentication. I can connect and interact with it fine via cadaver. However, when I try to connect from nautilus, it says "Access was denied." To make it even stranger, sometimes I can click on the folder in nautilus (it still mounts) and access it. Sometimes not (just repeats the error message and won't show me the contents). I may not even un-mount it, but just look at other folder, then click it again and be able to access it, but again - only rarely.
I asked a friend to try connecting from his windows vista computer and it would not work. It would not work from my windows XP virtual computer either. However, it mounts and works just find from my work computer (also Windows XP).
So it seems to be a 50/50 chance that the drive will mount on any given computer/system and work. Do anyone know what the problem may be? I'm guessing user permissions, but I can't figure out what.
I've made sure the webdav folder is owned by www-data and www-data has read access to the password file as well.
When I try connecting from nautilus, I get this in the log file:
Code:
Here is one of the (many) sites I've tried looking at: [url]
View 4 Replies
View Related
Aug 24, 2010
I configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
View 1 Replies
View Related
Feb 23, 2011
I Have installed fedora 14 on my PC and had set up LAN when i tries to connect linux using ssh connection i am able to conect it but when i tries tonnect from outside my network(Say from my office or from netcafe) i was not able to connect. i was not even able to ping my server but after some investigation i found that smb server configuration and ssh_config changes now i am able to ping my server. but when i tried to connect using Putty it is accepting user but when i enter right password it says access denied
View 4 Replies
View Related
Mar 11, 2010
I have two external hard drives. One is a 2.5" 80GB USB HDD and the other is a Seagate 3.5" USB 500GB HDD. Both hard drives are mounted properly and I can access the data on both hard drives. I can access the small 80GB HDD via ssh from another computer and delete files, but when I try to access the 500GB drive via ssh it says access denied. When I try to access it with root, I can access it but I cannot see any files listed.
View 5 Replies
View Related
Sep 11, 2010
i put a windows program on my ubuntu pc and it's a portable program so i had to add a shortcut to the menu myself, well, i got the shortcut added but when i click it, it says that it cannot access it and it also says Permission Denied.
View 7 Replies
View Related
Feb 8, 2010
I have set up RHEL 5 file server with Winbind and samba services running.I am able to assign and authenticate windows XP users against my RHEL 5 server.No issues.But one or two of my users are using Windows 7 Ultimate edition and they are not able to access my network samba shares.I can view the shares in windows 7 box but trying to access gives me "network access denied error".But i can access the same share in Windows xp machine for the above tested users.Working great but not in windows 7 box.I haven't tested with Vista OS yet.
View 2 Replies
View Related
Feb 22, 2011
i have 3 comps(running suse 11.3) and a laptop(running vista sp2). i have installed samba on all suse comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.
I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet. the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.
View 1 Replies
View Related
Oct 26, 2010
Just got a new one, using 64 bit 10.04(LTS), firefox, also got on other computer using 32 bit 10.10
This one is for CNN, also have for Foxnews and a couple of others
Access Denied (policy_denied)
Your system policy has denied access to the requested URL.
For assistance, contact your network support team. [/COLOR]
View 6 Replies
View Related
Aug 16, 2010
I use a network-connected HP printer through hplip and cupsI'm trying to discover how to access the media card ports that are built-in on the printer. Q1: Is there some way that my linux workstations can mount or otherwise access these flash-media cards?If not, then,Q2: Does anyone know about a network-connected, shared resource, multiple format media card device?(My wireless router has a USB port for shared things, but I think
View 6 Replies
View Related
Nov 9, 2010
I think I screwed up my Administrative username in mysql.
mysql -u root mysql
ERROR 1044 (42000): Access denied for user ''@'localhost' to database 'mysql'
Can I just copy all the files in /var/lib/mysql >>reinstall MySQL >> copy all the old folders into the new /var/lib/mysql ( while MySql is off)
View 9 Replies
View Related
Dec 19, 2009
I've got my other networking problem (mostly) solved, but now I'm having other issues.I was previously able to access the shared folders on a Windows machine on the network essentially by default. Now whenever I try to navigate to the shared folders graphically (either through Places->Network->Windows Network->(workgroup name here), or through a custom shortcut on the deskop), I get a message: "Failed to retrieve share list from server". I have no idea what I might have done config-wise (or install-program-wise) to screw it over, but something's definitely not working...it's been like this for a good many weeks, and I've just dealt with it, seeing as how I don't normally use that shared folder much anyway.
What's really ticking me off now, though, is that long before this started happening, I had set up a printer share with the same computer (using the graphical tool that comes with Ubuntu), and that worked excellently to start out. Recently, however, when I tried to print from the same printer (after the "Failed to retrieve share list" message started showing up), it would sit there and show "Pending"; it wouldn't print at all. Then I tried deleting the existing entry and creating a new one, figuring a new, fresh configuration would be created. However, when I tried to add a printer via the graphical tool (same as I had done before), it's telling me that "No printer was fount at [that] address".
View 4 Replies
View Related
Oct 21, 2010
I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines
Code:
And
Code:
eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT:
Code:
Code:
But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?
View 1 Replies
View Related
Dec 26, 2010
I had 10.04 set up in my computer so that I had two folders in home, they connected to folders in a windows 7 computer by adding the following to the fstab file:
Code:
//10.0.0.80/Movies /home/loco/Videos/Movies cifs username=guest,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
[code]....
View 7 Replies
View Related
May 8, 2010
I set up a nfs server that is working locally only, on remote I get this:
root@poc ~]# mount -t nfs storage:/var/ftp/pub /net
mount.nfs: access denied by server while mounting storage:/var/ftp/pub
This is my exports file:
/var/ftp/pub/downloads 192.168.1.23(rw,sync)
/var/ftp/pub 192.168.1.23(ro,sync)
this is my rpcinfo -p
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
100011 1 udp 875 rquotad .....
Firewall has 2049 open only. Other services suck as nfs or status, lockd have random ports, so firewalled.
View 1 Replies
View Related
Apr 21, 2011
Tried to setup server to export a fileshare:
But the darn laptop cannot connect! I get access denied!
Fedora 14 to Fedora 13.
View 3 Replies
View Related
Feb 27, 2009
I recently installed CentOS 5 as my server. I have samba running 100%, today i was working on NFS i had it semi working at one point where i could mount to the shared folder but i could not see any of the files in it, now when ever i try to access it i get, mount.nfs: access denied by server while mounting 192.168.1.100:/Server
View 11 Replies
View Related
Sep 10, 2010
I have been having problems with Samba sharing from my Ubuntu-Server to all of my Windows 7 machines. All of the machines are able to access the samba shares however when i try to write to these shares i get a "Access Denied" error. This only happens under windows 7, my Ubuntu laptop easily writes to these shares. PS My permissions are read/write to all
View 1 Replies
View Related
Sep 5, 2009
i have problem with samba share everytime when i want to browse shared folders on fedora machine from windows i always get this msg (SELinux is preventing samba (smbd) "getattr" to /proc/fs/nfsd (nfsd_fs_t).)here is my selinuxlog
Summary:
SELinux is preventing samba (smbd) "getattr" to /proc/fs/nfsd (nfsd_fs_t).
%
View 6 Replies
View Related
Dec 2, 2010
i'm trying to setup a nfs4 server and client. i followed the instructions in [URL](nfsv4 quick start section) and [URL] The SERVER is on 192.168.89.1 running Xubuntu 10.04, and the CLIENT is on 192.168.89.128 running Ubuntu 10.10. Firewall is disabled on both the server and the client for testing purposes. /etc/default/nfs-kernel-server on the SERVER:
Code:
# Number of servers to start up
RPCNFSDCOUNT=8
# Runtime priority of server (see nice(1))
[code]....
On the [URL], i see some steps related to portmap on the "NFS Server" and "NFS Client" sections. Would i need those steps as well? There's also a list of steps on [URL] (linked from [URL]. Are those necessary?
EDIT: Running showmount on the client seemed to show that NOTHING is shared on the server:
Code:
$ showmount -a 192.168.89.1
All mount points on 192.168.89.1:
View 3 Replies
View Related
Jan 2, 2009
After an update to fedora 10, I cannot access my bluetooth printer any more.
I used to run hcitool to discover the printer, which still works
Code:
In the printer configuration, I used to enter a URL like this Printer URL bluetooth://000CF606C08A/
Note, the "bluetooth" protocol is not offered any more in printer setup.
I read that Fedora 10 comes with an updated BlueZ 4 package, which has an improved gnome applet.
Code:
The applet discovers the printer, but fails pairing with the device. There seems to be short flash up of a pincode error message (which I cant read).
I've been using blurtooth printing with no problems since Fedora 6.
How to configure bluez cups printing on Fedora 10?
View 3 Replies
View Related
Aug 26, 2010
I installed 11.3amd64 as a VM under Vista/VMWare Player - all worked fine. I have now installed it as a physical system. It nstalled cleanly BUT during first boot it could not access the repos. With each repo it gave the message
- download (curl) error for (repo)
- error code connection failed
- error message could not resolve host (repo)
This was followed by a message box containing
- UI syntax error
- no widget with ID 'contents
Firefox could not access the internet (cannot find server) until I disabled IPV6 (I used about:config), now it works fine. I think the repos problem is because of IPV6 - I usually have trouble with IPV6. I tried disabling IPV6 with the following (How To Disable ipv6 on SuSE Linux | Linux Poison)
[code]......
View 8 Replies
View Related
Apr 22, 2010
I'm running ubuntu 9.10, and created a softraid5 with no problems. Now i need it to automount with user read/write access, and i need to make some network share folders. My fstab has the following line for the raid:
Code:
/dev/md0 /media/raid auto rw,user,auto,exec 0 0
After i mounted it, i changed the permission with:
Code:
sudo chmod 777 /media/raid/
So now i can create folders and files on it.
Then i created some shares, one with guest access and other with no guest access.
Now the questions:
1) If i access the guest shared folder via WinXP, i create files and folders, but they appear locked on ubuntu, so i cant access them until i change the permissions. If i go to proprieties/Permissions, the owner is "nobody".
2) What password do i need to use on WinXP, and i try to access the non-guest shared folded? Do i need to create a user just for that?
View 1 Replies
View Related
Feb 19, 2010
Running Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.
When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.
View 1 Replies
View Related
Dec 5, 2010
i'm trying to setup a nfs4 server and client. i followed the instructions in
[URL]
The SERVER is on 192.168.89.1 running Xubuntu 10.04, and the CLIENT is on 192.168.89.128 running Ubuntu 10.10. Firewall is disabled on both the server and the client for testing purposes. /etc/default/nfs-kernel-server on the SERVER:
Code:
# Number of servers to start up
RPCNFSDCOUNT=8
# Runtime priority of server (see nice(1))
[code]....
because we want UID/GUID to be mapped from names. This way, server and client do not need the users to share same UID/GUID. In that case,
1. Should i set those 2 fields to "no" and "yes" respectively instead?
2. Or else, how do i make sure that the uid on the server is mapped to something useful on the client instead of nobody and nogroup?
View 1 Replies
View Related
Jan 14, 2010
I can SSH into my RHEL box, but get an "Access denied" error :-
Quote:
login as: root
Access denied
root 192.168.0.10's password:
Last login:.....
#
So, I can SSH in, but it always prints the Access denied!?
View 5 Replies
View Related
