General :: Access Denied When Login From Outside Network?
Feb 23, 2011
I Have installed fedora 14 on my PC and had set up LAN when i tries to connect linux using ssh connection i am able to conect it but when i tries tonnect from outside my network(Say from my office or from netcafe) i was not able to connect. i was not even able to ping my server but after some investigation i found that smb server configuration and ssh_config changes now i am able to ping my server. but when i tried to connect using Putty it is accepting user but when i enter right password it says access denied
I have set up RHEL 5 file server with Winbind and samba services running.I am able to assign and authenticate windows XP users against my RHEL 5 server.No issues.But one or two of my users are using Windows 7 Ultimate edition and they are not able to access my network samba shares.I can view the shares in windows 7 box but trying to access gives me "network access denied error".But i can access the same share in Windows xp machine for the above tested users.Working great but not in windows 7 box.I haven't tested with Vista OS yet.
I have a linux domain (FEDORA CORE 1) and two laptop's which are part of my domain with windows xp pro service pack 2.I have given two ip's to both the laptop's being primary as global and secondary as local.I have configured printer in one laptop and shared.Till last week i was accessing that shared printer from my other laptop and every thing was working fine.Last week i formatted one laptop,(which dose not have shared printer) from then onwards i am not able to access my other laptop. I get the following message when i try to accessmy other Laptop,"you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permission there are currently no logon servers available to service the logon request"P.S : If i have only local IP i am able to see both the systems and i am able to access my printer, this problem comes only when i add global IP to both the machines.And also i have stopped the firewall and other things.
Has anyone seen this? I have attached a screenshot of it to this post.
When I log in using PUTTY, as soon as I enter my username and hit enter I get Access denied, then a prompt for a password and all works well, it just tells me access denied even though it didnt deny me. its weird.
I have a network drive setup on windows to a samba share that is on ubuntu 9.1. The folder im connecting to has a couple symbolic links setup and all of them give me an Access denied error when I try to open them. I have dont everything I can think off including chowning all the folders to the user that Im logged in as and doing chmod 777 on all folders and files. I have tried deleting the link and recreating it and nothing works. This was working fine a few days ago and now it doesn't.
when i logging with root then i saw message "permission denied" Then i changed root shell directory "usermod -s .usr/ root" but it says "permission denied" again. what is the default shell directory, or what can i do for change permissions.
I am working currently on my server on an issue, I configured the SSH Deamon that only people who have a valid ssh-key can login on to the server, and kicked the password option. Now I've added a user account git. I navigate to his home folder created the folder ".ssh" and created in that folder the file "authorized_keys" I copied my public key in there. Now on my local machine I added that identity (via ssh-add) and I wanted to connect to my server. but when I'm trying to login myself I can't the only message I get is "Permission denied (publickey)."
Even if im logged into root I cant edit or view any files. Like if I type /etc/rc.conf in Arch it, says "permission denied" so how do I edit this file cuz I need to put gdm and dbus in my daemons
Using NFS on the client machine. I am running scientific linux on my machine. Its working fine for my other machines.I have made sure that the firewall is disabled and also the selinux too. here is what i get when i use rpcinfo -p on the client.
rpcinfo -p program vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100007 2 udp 868 ypbind 100007 1 udp 868 ypbind .....
I have two computers. One runs unRaid NAS software which is built on Linux. The other is running XBMC media center which is built on Ubuntu. XBMC has a local folder (/home/kevin/.xbmc/userdata/Thumbnails/) that it stores thumbnails in. I am essentially trying to move this folder to my server, but XBMC needs to see it as local. I started by deleting the old Thumbnails folder and it's contents. I then created an empty Thumbnails folder on XBMC and I also created one on my unRaid comp (192.168.1.20/disk7/xbmc_thumbs/Thumbnails). On the XBMC comp I run:
Code: chmod 777 Thumbnails mount -t cifs //192.168.1.20/disk7/xbmc_thumbs/Thumbnails Thumbnails
It creates the mount and as long as I'm logged in as root, I can copy files to the XBMC Thumbnails folder and they appear on my unRaid server's Thumbnails folder. The problem is that if I log in as kevin (the user that XBMC runs as) I get permission denied errors. I've tried changing ownership of the XBMC Thumbnails folder to kevin via:
Code: chown -v kevin Thumbnails
And it says it changed it, but if I check, the ownership and group both still show as root. I'm thinking that may be because now that the mount is made, it's showing the ownership of the Thumbnails folder on the unRaid server? Whatever it's doing I can't seem to change it and XBMC can't write it's thumbnails because of this.
I'm having a problem with my webdav share. I have a secure webdav folder that gets accessed via a non-standard port and requires basic authentication. I can connect and interact with it fine via cadaver. However, when I try to connect from nautilus, it says "Access was denied." To make it even stranger, sometimes I can click on the folder in nautilus (it still mounts) and access it. Sometimes not (just repeats the error message and won't show me the contents). I may not even un-mount it, but just look at other folder, then click it again and be able to access it, but again - only rarely.
I asked a friend to try connecting from his windows vista computer and it would not work. It would not work from my windows XP virtual computer either. However, it mounts and works just find from my work computer (also Windows XP).
So it seems to be a 50/50 chance that the drive will mount on any given computer/system and work. Do anyone know what the problem may be? I'm guessing user permissions, but I can't figure out what.
I've made sure the webdav folder is owned by www-data and www-data has read access to the password file as well.
When I try connecting from nautilus, I get this in the log file:
Code:
Here is one of the (many) sites I've tried looking at: [url]
I configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
I have two external hard drives. One is a 2.5" 80GB USB HDD and the other is a Seagate 3.5" USB 500GB HDD. Both hard drives are mounted properly and I can access the data on both hard drives. I can access the small 80GB HDD via ssh from another computer and delete files, but when I try to access the 500GB drive via ssh it says access denied. When I try to access it with root, I can access it but I cannot see any files listed.
i put a windows program on my ubuntu pc and it's a portable program so i had to add a shortcut to the menu myself, well, i got the shortcut added but when i click it, it says that it cannot access it and it also says Permission Denied.
I dont know were to begin to solve my problem and I have been googling for hours to get a hint without any success. I'm runnning a Counterstrike Server on my virtual openSuse server - I'm exploring so don't justify what I am hosting at the moment
I want to make it possible to gain access to the cstrike folde via a ftp login. But I really have no idea were to start. The server is also a webserver, where I can ass FTP accounts for my apache vhosts via plesk - but I dont think this is the solution of my problem, isn't it?
In my company, they provide linux machines which has a 4 yr old Gentoo linux. Also the OS is loaded through Yukon PXE/netboot environment, and the users directory is mounted from an network location. Also they dont provide root access in these machines.
I would love to use the latest Ubuntu in this machine. Please let me know if it is possible to configure a ubuntu/xubuntu in this machine. I need to be able to login with my corporate user_id/passwd, because many of the tools use this for authentication. so just doing a ubuntu installation in this machine and mounting the n/w location would not help.
I am not able to login to server from console attached to server, every time i enter username & password but it again asks for username & password. But when i try to login to server from remote machine, login happens properly.
When login through root on HP-tru Unix server, I am trying to access a directory, it is saying "Permission Denied".. Also, an sh file is also not able to execute through same root access..I have checked the permission of the directory as well as for sh file through ls-ltr.. It is also fine.. Root System rwx-rwx-rwx--What could be the possible cause, and how to correct it..
I am using squid to controlling access to the internet all is working fine expect one of the user who is using outside organization portal to connect internet. But whenever he tries to enter in the portal by typing (EXAMPLE)url. Permission denied error from squid occur.
How can i allow this portal in squid. So squid will allow this to access.
I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
I created some users on my Ubuntu 10.0.4 machine a long time ago (whilst experimenting). Some of these users can login to the system, and others were prevented from login in. I can't remeber which ones can login. I have the following questions:
How do I find out which users may login to the machine? How may I disable an existing user account from login in? How may I re-enable a previously (login) disabled user account so it an login again?
I have installed Nginx with PHP-FPM on Debian 8 to learn more about Linux permissions. Nginx is run as www-data user.
I have created a simple PHP script that outputs the date. I have set the permission as 000 (no permission at all) and it is root:root. How come I can still run this script in the browser without getting access denied? The script is inside a folder with world execution. When removing the world execution permission, the script can't be run. How does this all connect to each other?
My program tries to open serial port on Fedora 12, and shows "Access denied" on Open Port operation. The same program runs successfully with root rights. What can I do to get COM port access as regular user?
