General :: Windows 7 -Samba Share-Network Access Denied
Feb 8, 2010
I have set up RHEL 5 file server with Winbind and samba services running.I am able to assign and authenticate windows XP users against my RHEL 5 server.No issues.But one or two of my users are using Windows 7 Ultimate edition and they are not able to access my network samba shares.I can view the shares in windows 7 box but trying to access gives me "network access denied error".But i can access the same share in Windows xp machine for the above tested users.Working great but not in windows 7 box.I haven't tested with Vista OS yet.
View 2 Replies
ADVERTISEMENT
Jun 24, 2010
I have Samba 3.5.3-61 running on a Fedora Core 13 system. I created a share that is browseable to all systems, and I made sure to create a user account via the smbpasswd utility. When I try to connect to the server from a Windows XP system, I am able to enter the appropriate sharename as well as the username and password.
View 3 Replies
View Related
Dec 26, 2010
I had 10.04 set up in my computer so that I had two folders in home, they connected to folders in a windows 7 computer by adding the following to the fstab file:
Code:
//10.0.0.80/Movies /home/loco/Videos/Movies cifs username=guest,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
[code]....
View 7 Replies
View Related
Jan 18, 2010
On Windows 7, I have VirtualBox running Linux (Ubuntu 8.04), with Samba set up so that the Windows host can access it. But if the virtual machine is shut down & restored, or rebooted, the Windows Network no longer shows it. I've tried refreshing many times, restarting Samba, disabling/enabling the virtual network adapter, and running the succession of commands ipconfig /release, ipconfig /flushdns, & ipconfig /renew, but none worked. As a last resort I could restart the host itself, but is there a better way?
View 3 Replies
View Related
Sep 10, 2010
I have been having problems with Samba sharing from my Ubuntu-Server to all of my Windows 7 machines. All of the machines are able to access the samba shares however when i try to write to these shares i get a "Access Denied" error. This only happens under windows 7, my Ubuntu laptop easily writes to these shares. PS My permissions are read/write to all
View 1 Replies
View Related
Apr 13, 2010
I have a samba server on my LAN. It can be accessed without any problems from Windows machines on the LAN without password. I have two computers that I have updated to OpenSuse 11.2 (both used to run 10.3). Since doing this upgrade I can no longer access the samba share from the Suse machines. Basically, both Dolphin and Konqueror ask for a username and password to access "avoca" (the workgroup).
View 9 Replies
View Related
Feb 25, 2010
i did install and configure samba buy google tutorials. I can ping the centos box from windows but cannt access folder which is on centos. I can ping the machine.
View 9 Replies
View Related
Aug 28, 2010
I have currently have opensuse 11.2 installed. I am trying to setup samba shares which you can only access as certain user. Currently looks like the only way I can access these share is use root username/password!
I want to which GUI I need to use to setup this up properly. And of course what setting to exactly to use.
View 2 Replies
View Related
Sep 1, 2010
I've used Samba for several years and when it works it's great. Unfortunately from time to time it seems to get messed up and either all the 7 machines on my home network can't be seen or I can't access the shares on some. I have 2 Windows XP computers 4 Kubuntu and one Linux Mint KDE, all the latest versions. I'd rather not plough through all the documentation for Samba, but would really like a "model" smb.conf with a few comments about parts that might have legitimate variants. I have researched this with Google searches many times but have failed to find the information I need in concise form.
View 4 Replies
View Related
Mar 1, 2009
I have a fedora 10 box with two network card on eth0 I have a pppoe connection to the internet, on second card eth1 I share my internet connection end I set up a samba server but I don't know if the settings are good. How to do this settings right to work fine, the ip are assigned by dhcp I don't use any static ip .When I try to browse the internet from the other computers some site's like {.com ; .org ; .info} are block, other site from {.ro} are working. Someone tell me something about turn off all my filters, but I don't know where to find this filter to turn it off. And when I use samba I can't have and internet access or vice versa. My network look like that:
Code:
eth0
|<--pppoe connection
|
MyComputer
(fedora 10)
|
eth1
|
switch
|
comp.1 comp.2
Win OS MacOS
View 2 Replies
View Related
Jul 15, 2011
I am unable to access samba share from my windows machine. I am getting the following error
View 9 Replies
View Related
Jan 23, 2010
I can't be the first one with this problem. What am I missing?
I have setup Samba servers in the past, just none under SELinux. The last one I configured was a couple years ago, so I wouldn't doubt I'm a bit rusty.
---- Environment summary:
Clean server install of CentOS 5.4 includes SELinux
- lets call this 'server'
- updated samba to 3.0.33-3.15.el5_4.1
Client1 - Windows XP sp4 - WINS configuration uses 'server' noted above
Client2 - Windows Vista - WINS configuration uses 'server' noted above
---- What works / what doesn't ------
Clients can see the server (XP and vista) in network neighborhood.
The following does not work from windows (xp or vista)
net view
net view \server
net view \server-ip
net view \servershare
This does work on the server
smbclient -L \server
smbclient -L \server --user validuser
smbclient -L \client1 --user validuser
---- What I have configured and tried (config/output below) --------
firewall ports for samba are open
SELinux enforcing or permissive
file context is set on share
samba booleans are set
***firewall
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p tcp --dport 445 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 137 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 138 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p udp --dport 139 -j ACCEPT
***SELinux mode/booleans
# sestatus
SELinux status: enabled
SELinuxfs mount: /selinux
Current mode: permissive
Mode from config file: enforcing
Policy version: 21
Policy from config file: targeted
# getsebool -a | grep smb
allow_smbd_anon_write --> off
smbd_disable_trans --> on
# getsebool -a | grep samba
samba_domain_controller --> on
samba_enable_home_dirs --> on
samba_export_all_ro --> off
samba_export_all_rw --> off
samba_share_fusefs --> off
samba_share_nfs --> off
use_samba_home_dirs --> on
virt_use_samba --> off
***filesystem
# semanage fcontext -a -t samba_share_t �/share/photos(/.*)?�
# restorecon -R -v /share/photos
***Disks
]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda3 9920624 2070872 7337684 23% /
/dev/sda1 101086 19146 76721 20% /boot
tmpfs 1846656 0 1846656 0% /dev/shm
/dev/mapper/VolGroup00-xen
100791728 202540 95469188 1% /xen
/dev/mapper/VolGroup00-photo00
251981556 191716 238989840 1% /share/photos
/dev/mapper/VolGroup00-dmsdoc00
100791728 192256 95479472 1% /share/alfresco
none 1846656 104 1846552 1% /var/lib/xenstored
***smb.conf
[global]
workgroup = workgroup
netbios name = server
security = user
name resolve order = wins hosts lmhosts bcast
encrypt passwords = yes
hosts allow = 192.168.0.
hosts deny = 192.168.122.
interfaces = eth0
passdb backend = tdbsam
oslevel = 222
local master = yes
domain master = yes
preferred master = yes
cups options = raw
username map = /etc/samba/smbusers
wins support = yes
log level = 4
guest ok = yes
[photo]
comment = Photos
path = /share/photos
read only = yes
guest ok = yes
View 5 Replies
View Related
Oct 10, 2010
System: openSUSE 11.3, Gnome
In the Windows network, there are 2 or more shares as follows:
I can access both shares in nautilus e.g. "smb://bla.bla.company.com/share $". The shares are mounted then in "home/user/.gvfs/". ok.
In one of shares, is a file-based repo, which I can access easily with svn.
Unfortunately when I try to checkout any normal folder from a share (as in MS$ with Tortoise), I fail...
What's more in the file-based repo, external references exist to other shares in the network, the name is as "file:///X:/folder/file.txt". SVN gives error messages about such references and does not access files (where "X:/" is also mounted, but as a "test$ to smb://bla.bla.company.com/test$" in "home/user/.gvfs/ ").
My questions:
- what is the best solution to mount shares, so I can access all the SVN repos?
- How can I access normal files and folders from a share with svn?
- How can the problem with external file references in a file-based SVN repo can be solved? without to checkout/commit files "manually"...
- Some checkouted scripts (Perl, etc.) use libs from shares:
"Use lib qw(r:/tools/perl/lib/). how to get around this as well?
- How can I change mount-names: "test$ on smb://bla.bla.company.com/test$" to something like "share-test$?
- How can I change the mount location? in "home/user/SAMBA/" instead of "/home/user/.gvfs/"..
I had tried to use "fuse-smb": installed, created config, but when I run "fusesmb /home/user/SHARES/", i get an error message: smb.conf is missing.. Where can I get this config?
And one last question: Can someone recommend me a svn-gui? i have tried tried rabbitcvs, esvn and some others .. but all either do not work or crash.
I'm not sure, but maybe I can use svn and tortoise in wine, and checkout/commit the necessary files from/to "home/user/project/"? there raises the questions whether it is possible to install tortoise in wine and how to mount the shares on the wine? How to manage the hard-coded lib-names in some scripts...
View 1 Replies
View Related
Mar 8, 2011
I have ubunto desktop 10.04 LTS I installed samba and able to access the share on windows machines. However i want to access the share on 300 windows machine(for example) systems at a time Is it possible.
View 5 Replies
View Related
Feb 10, 2010
running a Ubuntu 8.10 Desktop in the living room with a LOT of files. I've tried all week to get this working, and can't tell where the problem is. I want to make a music share that will: Allow guests, but as read-only Allow me to mount in Windows 7 with the user 'thecheeks' Give user thecheeks read/write access to that share
I swear Samba ends up working but maybe the problem is with Windows 7. I looked at the SAMBAWiki Win 7 page and made sure my registry values were what they should have been (and they were).
View 1 Replies
View Related
Jul 7, 2010
I cannot browse the samba printers from windows xp professional clients.
I get the following message when trying to access the workgroup:
Code: Example is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The list of servers for this workgroup is not currently available
Another strange thing is that if I set the workgroup to EXAMPLE in smb.conf, the workgroup shows up as Example on my windows clients.
View 4 Replies
View Related
Aug 25, 2009
Does anybody know if there is a quick and easy way to simply disable samba security to avoid "Access Denied" errors when trying to access shares via Windows XP?
View 2 Replies
View Related
May 12, 2011
I installed samba server on fedora13 last week and share some files from samba server GUI. I also created samba user and password for shared folders but I can't get access samba share folder from neither fedora machine nor Windows XP. When I open samba share from other fedora such as smb://192.168.10.2. I can see share file and when I browse folder, password required box is appeared but after I put samba username and password. The Error message is Unable to mount location Failed to mount Windows share. Even when I browsed samba share from windows xp.
Error message is \192.168.10.2smbshare is not accessible. You might not persioon to use this network resource. Contact the administrator. The network path was not found. How can I get access samba share from both fedora and XP that is what I installed on server:
[root@fedora2 mnt]# rpm -qa samba*
samba-winbind-clients-3.5.2-60.fc13.i686
samba-swat-3.5.8-74.fc13.i686
samba-client-3.5.8-74.fc13.i686
samba-3.5.8-74.fc13.i686
samba-common-3.5.8-74.fc13.i686
and here is my smb.conf file
# Samba config file created using SWAT
# from UNKNOWN (127.0.0.1)
# Date: 2011/04/29 22:05:08
[global]
workgroup = workgroup
server string = Samba Server Version %v
security = user
guest account = youth
log file = /var/log/samba/log.%m
max log size = 50
guest ok = yes
cups options = raw
smb passwd file = /etc/samba/smbpasswd
;encrypt passwords = yes
[homes]
comment = for all users
read only = No
;browseable = yes
path = /home/aung/smbshare
[printers]
comment = All Printers
path = /var/spool/samba
printable = Yes
browseable = No
[Public]
path = /home/aung/Public
read only = no
;browseable = yes
valid users = abrt, ftp, operator, youth, yu
[smbshare]
comment = personal share
path = /home/aung/smbshare
write list = yu
read only = no
;browseable = yes
valid users = youth
View 2 Replies
View Related
Mar 22, 2010
I am trying to connect to a Windows 7 PC through Samba, and while samba can find the Windows 7 PC, it cannot access it, asking for a username and password instead. However, I can access the another Windows XP share perfectly fine.
View 2 Replies
View Related
Feb 23, 2011
I Have installed fedora 14 on my PC and had set up LAN when i tries to connect linux using ssh connection i am able to conect it but when i tries tonnect from outside my network(Say from my office or from netcafe) i was not able to connect. i was not even able to ping my server but after some investigation i found that smb server configuration and ssh_config changes now i am able to ping my server. but when i tried to connect using Putty it is accepting user but when i enter right password it says access denied
View 4 Replies
View Related
Mar 23, 2010
I'm running Ubuntu 9.10, and am getting the following error when I attempt to access the HADEN workgroup on my Windows network via Samba: Unable to mount location - Failed to retrieve share list from server. I ran the following command:
Code:
peterv@MBP17U:~$ findsmb
sh: /usr/bin/nmblookup: not found
*=DMB
+=LMB
IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION
[Code]...
On my Windows XP machine, I can see the Ubuntu directory and can access files on it. I just can't access the Windows workgroup from Ubuntu.
View 1 Replies
View Related
Mar 9, 2011
I am setting up samba on my CentOS server for the first time. I am using webmin to configure samba. Here is the smb.conf
Code:
[global]
netbios name = KISKA
cups options = raw
load printers = yes
server string =
[code]...
I can see the domain name "KISKA" in the "network" tab of windows explorer, however when I click on it I get this error: Windows cannot access \KISKA check the spelling of the name. otherwise there might be a problem with your network. Under the details of this error I get this: "The network path was not found" Also I have stopped iptables so it cant be firewalled
View 5 Replies
View Related
Sep 7, 2010
I'm trying to set my openSUSE desktop up to use the printers on my office network via Samba. I managed to get it working in 11.2 but 11.3 is giving me some trouble.I am able to access the printers and use them but I have to enter my network credentials each time I print. In 11.2 I was able to "save" my username/password and was not required to do this. Are there any Samba packages I need to add in addition to the basic ones? There seems to be a lack of documentation on this particular subject, most is concerning Windows clients printing on Linux print servers.
View 2 Replies
View Related
May 31, 2011
I am trying to mount a shared folder from windows xp to my ubuntu vm. It is running in vm player.
I installed samba with sudo apt-get smbclient smbfs
Next, I run smbclient -L computer_name_here and get the error NT_STATUS_LOGON_FAILURE. What am I doing wrong? How can I solve this?
View 1 Replies
View Related
Jan 9, 2011
want to made 2 users in samba by which windows machine we access share, say user1 has read,execute permission, user2 has read write delete update full permission. we have done user1 configuration as premia user. we need your guideline for user2
we change the smb.conf file
# less /etc/samba/smb.conf
[global]
[code]...
View 2 Replies
View Related
Sep 10, 2010
Everything works fine in doing this, however every time a user logs into the Windows Citrix Session the roaming profile created on the linux samba share creates their Windows Profile with a 755 perms. I understand that the default umask is (globally on my RHEL host is 022 ??) but in my smb.conf file the definition that is defined for the directory is set to a create mask of 0700. What is going on?
View 3 Replies
View Related
Feb 21, 2011
Is there any way to share folders in linux machine to windows machine except samba and ftp..
samba is blocking by the hosting company.
View 3 Replies
View Related
Oct 19, 2010
when client goes to bind to NFS share on remote server - they are getting access denied when using the mount command; [SERVER] - CentOS 5.3 /etc/exports /mnt/data 192.168.5.199(rw) - implying the client I want to have access
[Code]...
View 12 Replies
View Related
Mar 15, 2011
I would like to share a folder from a Linux Guest with a Windows host (with read and write access if possible) in VirtualBox. I read in these two links: here and here that it's possible to do this using Samba, but I am a little bit lost and need more information on how to proceed.
So far, I managed to set up two network adapters (one NAT and one host-only) and to install Samba on the Linux guest, but I have the following questions now: What do I need to type in samba.conf to share a folder from the Linux guest? (the tutorial provided in one of the links above only explains how to share home directories) Are there any Samba commands that I need to run on the guest to enable sharing? How do I make sure that these folders are only available to the host OS and not on the Internet? Once the Linux guest is setup, how do I access each of the individual shared folders from the Windows host? I read that I need to mount a drive on Windows to do this, but do I use Samba logins, or Linux logins, also do I use localhost? or do I need to set up an IP for this?
View 1 Replies
View Related
Apr 23, 2010
I want to access shared directory of windows xp from redhat linux. I share 'd:' drive from windows machine.
View 3 Replies
View Related
