OpenSUSE Hardware :: When Try To Access The 500GB Drive Via Ssh It Says Access Denied
Mar 11, 2010
I have two external hard drives. One is a 2.5" 80GB USB HDD and the other is a Seagate 3.5" USB 500GB HDD. Both hard drives are mounted properly and I can access the data on both hard drives. I can access the small 80GB HDD via ssh from another computer and delete files, but when I try to access the 500GB drive via ssh it says access denied. When I try to access it with root, I can access it but I cannot see any files listed.
View 5 Replies
ADVERTISEMENT
Oct 18, 2010
I have a back up hard drive I cannot access. When I try to move folders there I get the message 'access denied'. It is probably a simple permissions problem.I need some help to get permission to access it.
View 7 Replies
View Related
Mar 26, 2010
I'm having a problem with my webdav share. I have a secure webdav folder that gets accessed via a non-standard port and requires basic authentication. I can connect and interact with it fine via cadaver. However, when I try to connect from nautilus, it says "Access was denied." To make it even stranger, sometimes I can click on the folder in nautilus (it still mounts) and access it. Sometimes not (just repeats the error message and won't show me the contents). I may not even un-mount it, but just look at other folder, then click it again and be able to access it, but again - only rarely.
I asked a friend to try connecting from his windows vista computer and it would not work. It would not work from my windows XP virtual computer either. However, it mounts and works just find from my work computer (also Windows XP).
So it seems to be a 50/50 chance that the drive will mount on any given computer/system and work. Do anyone know what the problem may be? I'm guessing user permissions, but I can't figure out what.
I've made sure the webdav folder is owned by www-data and www-data has read access to the password file as well.
When I try connecting from nautilus, I get this in the log file:
Code:
Here is one of the (many) sites I've tried looking at: [url]
View 4 Replies
View Related
Aug 24, 2010
I configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
View 1 Replies
View Related
Mar 31, 2010
I have a network drive setup on windows to a samba share that is on ubuntu 9.1. The folder im connecting to has a couple symbolic links setup and all of them give me an Access denied error when I try to open them. I have dont everything I can think off including chowning all the folders to the user that Im logged in as and doing chmod 777 on all folders and files. I have tried deleting the link and recreating it and nothing works. This was working fine a few days ago and now it doesn't.
View 2 Replies
View Related
Sep 11, 2010
i put a windows program on my ubuntu pc and it's a portable program so i had to add a shortcut to the menu myself, well, i got the shortcut added but when i click it, it says that it cannot access it and it also says Permission Denied.
View 7 Replies
View Related
Aug 4, 2009
I have a linux domain (FEDORA CORE 1) and two laptop's which are part of my domain with windows xp pro service pack 2.I have given two ip's to both the laptop's being primary as global and secondary as local.I have configured printer in one laptop and shared.Till last week i was accessing that shared printer from my other laptop and every thing was working fine.Last week i formatted one laptop,(which dose not have shared printer) from then onwards i am not able to access my other laptop. I get the following message when i try to accessmy other Laptop,"you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permission there are currently no logon servers available to service the logon request"P.S : If i have only local IP i am able to see both the systems and i am able to access my printer, this problem comes only when i add global IP to both the machines.And also i have stopped the firewall and other things.
View 1 Replies
View Related
Apr 11, 2010
OpenSuse installed with Windows 7 installed first. I have successfully set up GRUB to boot both OS.
Problem description:
When trying to download (save) files into ROOT/WINDOWS/E message warns me that its not possible to write requested file.
how to allow Opensuse to write files into NTFS
View 6 Replies
View Related
Jul 1, 2010
My first message on this forum, I'm a new comer in the Suse world (after 10 years of debian, ouch) I really like this distro so far. Fast, clean, simple. I got an "acess denied" issue with the apache configuration though. I've installed apache through yast and configured it with yast-http. Permissions are okay and a index.htm file is in the directory.
I won't ask for a direct answer cause everything can be found on the wiki. However, I'm surprised that configuration files are not erased when the related software is uninstalled. I've spent the afternoon trying to make it work so I guess the config files are spoiled right now. I tried to erase all the config file but can't find the yast-http ones, so it does not launch the wizard like the first time. yast-http also warns about my network ruled by NetworkManager, and that it could not run properly with it, how come?
View 4 Replies
View Related
Feb 18, 2011
After some update every time I run update from the Yast or zypper I frequently get errors like the following (with zypper):
Code:
Permission to access 'http://download.opensuse.org/update/11.2/rpm/x86_64/unscd-0.43_0.45-2.1_0.2.1.x86_64.delta.rpm' denied.
Abort, retry, ignore? [a/r/i/?] (a):
If I type <r> then download continues. Is there any way to fix that or at least make it retry automatically?
View 3 Replies
View Related
Mar 13, 2010
I am pulling my hair out once again after trying for over 15 months off and on to get a tv tuner working under linux. I have just received my new tuner card which I thought was supposed to be easy to run, a HVR-950Q, no luck yet. But first I am trying to use something called mysql (new to me), for mythtv and [I] keep getting
# mysqladmin -u root password ma
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)
View 9 Replies
View Related
Jul 31, 2011
I am new to opensuse 11.4. I am trying to copy the flash 11 beta file (libflashplayer.so) into the lib64/browser-plugins folder but i get 'Access Denied. Could not write to (destination).
View 4 Replies
View Related
Nov 9, 2010
I think I screwed up my Administrative username in mysql.
mysql -u root mysql
ERROR 1044 (42000): Access denied for user ''@'localhost' to database 'mysql'
Can I just copy all the files in /var/lib/mysql >>reinstall MySQL >> copy all the old folders into the new /var/lib/mysql ( while MySql is off)
View 9 Replies
View Related
Feb 6, 2010
I just installed opensuse 11.2 and was invented with a issue where usb was not detected by the OS.
i tried lsusb no details were display
View 6 Replies
View Related
Aug 26, 2010
I installed 11.3amd64 as a VM under Vista/VMWare Player - all worked fine. I have now installed it as a physical system. It nstalled cleanly BUT during first boot it could not access the repos. With each repo it gave the message
- download (curl) error for (repo)
- error code connection failed
- error message could not resolve host (repo)
This was followed by a message box containing
- UI syntax error
- no widget with ID 'contents
Firefox could not access the internet (cannot find server) until I disabled IPV6 (I used about:config), now it works fine. I think the repos problem is because of IPV6 - I usually have trouble with IPV6. I tried disabling IPV6 with the following (How To Disable ipv6 on SuSE Linux | Linux Poison)
[code]......
View 8 Replies
View Related
Jan 15, 2010
I have a cd drive and a dvd drive in my computer, two seperate drives. Is there a way to disable the CD drive only in openSUSE 11.2, i only want to be able to access the DVD drive?
View 6 Replies
View Related
May 18, 2010
I've got an USB-to-IDE hard disk drive enclosure to revive an old IDE harddrive. I installed the drive and connected it to my pc running opensuse 11.2. Unfortunately the drive wasn't recognised, so I couldn't access it. This is the output of dmesg:
Code:
May 18 18:53:57 advo kernel: [81051.520117] usb 1-4: new high speed USB device using ehci_hcd and address 10
May 18 18:53:58 advo kernel: [81053.041979] usb 1-4: New USB device found, idVendor=058f, idProduct=6391
May 18 18:53:58 advo kernel: [81053.042107] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 18 18:53:58 advo kernel: [81053.042208] usb 1-4: Product: USB TO IDE Bridge
[Code].....
View 9 Replies
View Related
Jan 27, 2010
Today I tried to move an amsn skin into the right folder but the following message appears:
Access denied to /usr/share/amsn/skins/aMSN Live-1.0.
I am the only user on this computer so I think I have all rights?
permissions of the destination folder > owner: can view & modify content.
View 4 Replies
View Related
Oct 26, 2010
Just got a new one, using 64 bit 10.04(LTS), firefox, also got on other computer using 32 bit 10.10
This one is for CNN, also have for Foxnews and a couple of others
Access Denied (policy_denied)
Your system policy has denied access to the requested URL.
For assistance, contact your network support team. [/COLOR]
View 6 Replies
View Related
Dec 15, 2015
I have installed Nginx with PHP-FPM on Debian 8 to learn more about Linux permissions. Nginx is run as www-data user.
I have created a simple PHP script that outputs the date. I have set the permission as 000 (no permission at all) and it is root:root. How come I can still run this script in the browser without getting access denied? The script is inside a folder with world execution. When removing the world execution permission, the script can't be run. How does this all connect to each other?
View 2 Replies
View Related
May 24, 2010
My program tries to open serial port on Fedora 12, and shows "Access denied" on Open Port operation. The same program runs successfully with root rights. What can I do to get COM port access as regular user?
View 2 Replies
View Related
Nov 7, 2010
I am somewhat new to Fedora, only having F13 for 2 months and F12 about a year ago on my dieing AAO. Anyways...I am trying to get the Apache web service up and running. Type in http://localhost and I get the Apache welcome screen. Now I try to add my webpages to /var/www/html/ and it says Error Moving File: Access DeniedI tried to find where to login in as root and find nothing. I am VERY unfamiliar with command line prompt other than for the yum installs
View 7 Replies
View Related
Nov 24, 2010
I would like to install wordpress on fedora 14.so I downloaded the packages needed to install apache+php, and I saw the site is located in the directory /var/www/html.I unzipped the wordpress archive to this directory but when I enter the address "http://localhost/wp-admin/install.php" in the browser (firefox launched from the command line as root) I have the error message : ****************************You don't have permission to access /wp-admin/install.php on this server.****************************do you know what thing I have to do in order to make the directory available?
View 2 Replies
View Related
Jun 3, 2010
When attempting to check my postfix install by using telnet to send an email to an address outside my local network, I get a relay access denied error.
This is how I attempted to send an email
Code:
telnet my_server 25
helo my_server
mail from: me@my_server
rcpt to: me@gmail.com
[Code].....
View 9 Replies
View Related
Jul 9, 2010
Setup an Ubuntu LAMP server to house a Wordpress site. Everything is gravy but I am having some troubles getting emails to route outside my local network. I have setup Internet and also added my ISP SMTP as a smarthost - either way I get the dreaded Relay Access Denied 5.7.1.
I am using DynDns as I do not have a static IP - not sure if this makes a difference?
telnet my_dyn_dns.org 25
ehlo localhost
250-my_dyn_dns.org
250-PIPELINING
250-SIZE 10240000
[Code]....
I have also tried the above with my ISP smtp IP in relayhost - same error.
View 2 Replies
View Related
Sep 22, 2010
Using Ubuntu 10.04
I am trying to use the network printers shared within my University's AD domain. In Windows XP, I simply went to 'run' and typed "\[domain]", then it asked for my ID and passwords and list of printers came up from which I could just pick and add to my printer list. How can this be achieved in Ubuntu 10.04?
What I tried:
System->Administration->printing->Add->Network Printer -> Windows printer via Samba -> Browse, then I see the domain but when I input my id, domain name and password, access is denied...
View 5 Replies
View Related
Sep 25, 2010
I have been trying to run the following commands several times in the last coupl weeks, to no avail."su" to get to root...then while root "apt-get update" for updatesalso"sudo apt-get update"BOTH areenied even with root or user-admin pwd.States that either permission is denied and/or frequently states that the command "apt-get" does not exist
View 4 Replies
View Related
Nov 7, 2010
I recently installed 64-bit Ubuntu Maverick. This was a clean install as opposed to an upgrade. Since the install I have been having a heck of a time getting a remote filesystem mounted via nfs. The file system I have been trying to mount is located on my HDX-1000 media server. This machine is running a flavor a linux as it's operating system, and I have been using it for about 2 years now. I have been able to mount it's filesystem on all other machine in my house which include Windows 7, and a couple of earlier versions of Ubuntu linux. But I just could not get it to mount using Maverick. I kept getting the "mount.nfs access denied by server while mounting ..." message. Finally, I found a list of all the different parameters that can be specified on an entry in the fstab. The one that worked for me was simply to change the fstab entry from this:
Code:
HDX-Server1:/share/media/HDX-Server1 nfs rw,rsize=8192,wsize=8192,intr
to this:
Code:
HDX-Server1:/share/media/HDX-Server1 nfs rw,rsize=8192,wsize=8192,intr,nfsvers=3
That is one more little gremlin down. Just 34,689 to go.
View 2 Replies
View Related
Feb 8, 2011
I've set up Ubuntu Server 10.04 LTS 64-bit. I've set up zfs-fuse and created a zpool named 'data' which contains two 2TB WDC Green HDD's in raid1 (mirror). I've set up an NFS server to share the pool. So far so good. But now, I want to write to the pool. It has occurred to me that I need to be root to do that. On the server, this is not a problem (sudo cp...) but on my laptop I can not copy anything to the pool because I'm not a superuser.
View 1 Replies
View Related
Feb 22, 2011
I am using ubuntu 10.10. when I am using Codeblocks IDE it says that, permission :access is denied. When I try to run e .cpp code it occures. I think permission is denied on my HDD. How to make all of my HDD permitted when in Ubuntu....
View 4 Replies
View Related
