SUSE / Novell :: Access Denied When Printing From Windows Machine To Shared Printer
Nov 25, 2008
I have a OpenSUSE 11 machine set up as a domain controller. I have set my printer up to be shared to Windows machines logging into the domain. I was able to install the printer to my Windows machines. When you go to the printers folder in Windows, it shows the printer but says "access denied" instead of the usual "ready". If I print to the shared printer the job will go through. I am thinking it is an authentication issue because if I log into Windows machine as "root" and let it build a profile, the printer doesn't show the "access denied" message. How do I allow other users to have access to the printer?
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
I want to print from my linux box to my win7 pc that has a shared printer. I have cups installed and tried to add pritner using samba, but was unsuccesful, gave me an error when trying to add. The guide i followed is: Yet another Linux to Windows printing tip -- Debian Admin The printer model is a dell 2330d laser printer, it is not in cups, so i added the ppd file i got off the dell support site. I am aware that there is a native suse driver, but i want to print to the windows printer.If possible I would like to know how to do this via command line instead of the GUI.
I am currently running Lucid on my system and can't seem to get my printer on a Windows XP computer to print documents sent from my Ubuntu computer. I can see the Windows XP computer in Nautilus under Network and can even access the shared files on the Windows computer with no problem. I have been able to install the Windows shared printer on my Ubuntu computer using System>Administration>Printing>Add>Network Printer>"Windows Printer via Samba" without any error messages. The problem is that whenever I send a printing job to the shared printer, the printer acts like it is going to start printing then automatically stops just right before the paper is going to be fed. I have memorized the noises my printer makes right before the paper gets fed. That is how I know it stalls right before the paper is about to be fed.
When I check the print queue on my Windows computer, its status is "printing", but it never does. I have tried this with two different HP printers (Deskjet 3940 & PSC 1410), and it is the exact same problem on both.
I have a brand new Canon MF4350d printer/copier/fax/scanner installed and shared on XP that I can't get working on Ubuntu!
XP prints test pages fine. Ubuntu sees the XP shared printer, it sends print jobs, and the XP machine even receives the print jobs (I can see them "spooling" in the XP print manager) but then nothing happens. The job leaves Ubuntu showing 150k but then shows 50 bytes when received in XP before disappearing from the queue.
How I got to where I am...
There was no native driver in Ubuntu for the printer, so I downloaded Canon linux drivers source and compiled (including make install) based on some other threads I've found such as this one.
Compiling left me with PPD files that seem to be specific to the MF4350, although their names show MF4350z not MF4350d. I'm not sure why there were three different files with slightly different names (CNCUPSMF4350ZJ.ppd, CNCUPSMF4350ZK.ppd, and CNCUPSMF4350ZS.ppd).
I added the printer manually using the Ubuntu printer browser setup (Samba) and selected the .PPD files manually. I've tried all three different .PPD files to no avail.
I've toggled bi-directional comm. and tried different print drivers on XP. Nothing's worked yet.
I'm running Red Hat Linux and CUPS 1.2.4. I can print a test page to a Win 7 shared printer ok. However, when I issue the lpr command from a user or root, it won't print. The CUPS message is "Remote host did not accept data file (1)" and the job just hangs till I cancel it. The only thing I can tell that is different is that when the test page from CUPS is generated, it uses user "guest". When I try to print it using the lpr command, the user is "eddie" or "root". I tried adding a user account named "eddie" to the Win 7 box, I can print successfully from both CUPS and users on several other Win XP boxes.
I apologize if I'm a little wordy. I'll give the problem, then a detailed list of my setup (to help troubleshoot). Problem: I can't print from Ubuntu 10.4 on my Win7 shared printer. I also can't connect to the Win7 computer sharing the printer (probably a related problem).
Error Message:
1.) I click on Places, Network, Windows Network. I get an error that says "Unable to mount location, Failed to retrieve share list from server."
2.) I click on System, Administration, Printing, Add, Printer, Network Printer, Windows Printer via SAMBA, Browse..., and I get this error "No Print Shares, There were no print shares found. Please check that the Samba service is marked as trusted in your firewall configuration. To do this select System->Administration->Firewall from the main menu."
Network Configuration: I have a wireless/wired network (using a router) where the Ubuntu machine connects wirelessly and the Win7 machine connects wired. The Win7 machine is on a Win7 homegroup and custom named "workgroup". There is a username/password to log into the Win7 Machine. My other Win7 laptop connects just fine to the Win7 desktop's shared printer (and network drives). I know it isn't a issue of it not working (at least with other Win7 machines)
Problem: I'm assuming there is probably a setting in Win7 that needs adjusting (although I've looked at about everything I can find). I also don't know much about Ubuntu so it could very well be something I need to setup in Ubuntu. I checked already to make sure that SAMBA and the smbfs plugin is installed.
how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
After the kernel updated to version; 2.6.25.18-0.2 and I edited my grub boot file, and the printer driver shows as; Local Raw Printer, it fails to print. With SUSE 11.0, KDE 3.5.9, on a 2006 Gateway AMD Athlon desktop computer, using a Canon PIXMA MP500 multi-function inkjet printer connected USB, when I attempt to print a page, it shows as if it is functioning fine, but nothing happens, and no error messages.
I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
I am running Postfix 2.6.1 on Suse 11.2, and am receiving an error message on my windows machine saying "Recipient address rejected: Relay access denied." If I login to my email on the local machine or via squirrelmail I have no problem sending mail. The output of postconf -n is as follows:
server:~ # postconf -n alias_maps = hash:/etc/aliases biff = no
i've had a windows xp pro where the printer epson aculaser c900 is shared. When i wan't to print from linux. When i look on dhe xp pc the files are in the print qeue. But the printer give no print out.
I have a linux domain (FEDORA CORE 1) and two laptop's which are part of my domain with windows xp pro service pack 2.I have given two ip's to both the laptop's being primary as global and secondary as local.I have configured printer in one laptop and shared.Till last week i was accessing that shared printer from my other laptop and every thing was working fine.Last week i formatted one laptop,(which dose not have shared printer) from then onwards i am not able to access my other laptop. I get the following message when i try to accessmy other Laptop,"you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permission there are currently no logon servers available to service the logon request"P.S : If i have only local IP i am able to see both the systems and i am able to access my printer, this problem comes only when i add global IP to both the machines.And also i have stopped the firewall and other things.
I have a usb port problem. I am trying to set up printers to usb port. When II have setup printer to connect to usb. When I test connection, it prints. Any other part of printer setup, shows up in the Que, but will not test print.Seem that my usb port does not have permissions set up properly. How do I set up permissions and keep them setup?
I am trying to use the network printers shared within my University's AD domain. In Windows XP, I simply went to 'run' and typed "\[domain]", then it asked for my ID and passwords and list of printers came up from which I could just pick and add to my printer list. How can this be achieved in Ubuntu 10.04?
What I tried:
System->Administration->printing->Add->Network Printer -> Windows printer via Samba -> Browse, then I see the domain but when I input my id, domain name and password, access is denied...
Recently my computer was infected by several viruses and my brother cleaned it up and installed SuSe for me. He also put windows xp back on my system for our children. I am having a terrible time installing our Dell 924 printer. I have it installed for windows, but cannot get it to print for my Linux system. What am I doing wrong? Can anyone give me some direction?
I'm running Fedora 11 and printing to both an HP Laser Jet 4Plus and HP Office Jet 7130 via a Windows 7 PC. I have a UID/PWD account on the PC that differs from that on the Fedora, also one that is identical UID/PWD to that used in Fedora. This has worked fine until "recently" (noticed it in ~last week or 2). Suddenly I'm being asked repeatedly to authenticate to print, neither account credentials are working. I get the message "Tree connect failed (NT_STATUS_ACCESS_DENIED)" and I get nowhere. I tried delete and reinstall the printers in Fedora, that works OK, can "see" them in setup on the Windows 7 host just fine. But can't get past the repeated authentications ...? I'm guessing something has changed in Fedora updates because this used to work with same Windows 7 PC in prior weeks.
how to configure it. What I am trying to is this: I have a departmental folder housing two sub folders. The permissions on the parent folder for the department are 770 and the users from that department are all in a group based on their departments name.
One of the users who is granted access as a member of the group needs to be denided access to one of the two sub folders. How do I allow all users in the department into the first folder (this works already) but at the same time allow all but one into the second folder?
I have opened dolphin and some other application (avidemux, dolphin, firefox,etc). in the first window (dolphin) i have a file. i drag it to another window/application and if i release the left-button of mouse, the window/application of the drag destination become active (raise). is it any way to make it to come in front/top (active) once mouse is over window while still dragging, before releasing the mouse? there is "focus" stings (focus under mouse/raise with the delay) in "windows Behavior". the focus under mouse is working fine, but is not working while dragging. it would be very handy to see where i drop the file, especially if i only see a small partition of the destination window, which is behind other windows. my spec: suse 11.3, 64 bit, kde 4.5.3, kernel: 2.634.7
I have a windows machine on my lan with a printer attached. I have samba running on my F11 laptop and I can use it to access shared files on the windows machine. But how can I use the printer from fedora? When I go to Administor>Printers then I just get an empty list, even after pressing 'rescan'. Do I have to change some firewall/samba configuration? If not then where else would I see the printer?
I am useing open suse 11.2 dual boot with windows server 2008. Could anybody give some suggestion do I need to upgrade to open suse 11.3. And How I can deal with that and keep my windows.
Today I try to shared a folder for Windows XP using GUI in OpenSUSE 11.1. I created a folder --> right click and click on Share --> Check on "Share with Samba(Microsoft Windows)", "Public" and "Writable". Then connect from Windows using //192.168.100.1/sharefolder. It open up but I can only read (no write access as I check on "Writable"). Did I miss something?
We want to print PDFs from a Linux server to a HP LaserJet 1320 PCL 6 which is attached to a Windows print server.
The command we use is lp -d LaserJet sicl_rcpdebtnt_5.pdf
Problem is, the printout comes with the top 10% of the page not printed. i.e. the printing starts from about 10% of the PDF. The header and top information is not printed.
We tried the scaling option: lp -o scaling=75 -d LaserJet sicl_rcpdebtnt_5.pdf
But that also has no effect. Only the characters become smaller but still the same problem is there.
What can we do to print the entire PDF in ONE page. When we open the PDF in Windows and print it we have to say Fit to printer margins for the printer's page scaling property.
Been using Ubuntu now almost 1 year and love it but I'm still mostly lost so I need someone to explain in great detail how to be able to access the My Documents folder on my LAN XP machine. I've been up and working fine for 6 or 8 months but all of the sudden (maybe it was an update package?) I get the following error message, after a long delay, when trying to access the shared folder:
Could not open location 'smb://office/my%20documents/'Failed to mount Windows share.I have set an icon on the top panel mapped to the XP machine and launched by launcher.
I have a virtual Linux box with a static IP in the cloud.
I have remote sites that have networked PCs that normally act as terminals but also have more than one printer on the Windows Network.
I would like software on the Window's machine to access the known IP address of the server and advertise the printers on the network so they can be printed to with lpr or cups. I don't have a problem manually setting up the printers on Centos if that is necessary. (But I need to know how to do that as well).
I need to know if I can setup a VPN on Windows without it stopping regular internet traffic and how to do it.
I need to know all the steps (what to install, what to issue commands for) to make this happen without using a GUI if possible and if the GUI is easier I need to know which GUI to install.
I also do not have a problem with using a VPN router at the client side if that makes it any easier. Like a Cisco RV120W.
I have not been able to print from my PCLinux box through my Windows machine (printer connected and working on that machine).
There are shared files on the Windows machine that can be seen with PCLinuxOS and accessed. PCLinuxOS can supposedly see the printer, but will not print a test page.
Yesterday I installed FC13.i636, Gnome 2.30.0, on my Dell Latitude D505 laptop. Fresh install from live CD, single partition. Installed all 400+ recommended updates last night. System is working *very* smoothly.I want to print (wireless connection) to my Canon MP160 printer, which is attached to my WinXP machine, and is set as a Shared printer in WinXP. I can print to it fine with my iBook.I used the System/Admin/Printing app to set up a networked printer, letting the app "find" the printer. Printer now shows in the app as:
lpd://192.168.1.108
I choose the appropriate driver and tried a test page. Test page job results in queue showing job "processing" but nothing comes from printer, even ten minutes later. Printer properties show:
I have a Brother HL-2140 connected to a Linux box (Ubuntu 10.04 LTS) that I want to share on a Windows 7 home network (wireless). I followed all the configuration instructions as given on Ubuntu Documentation: Network Printing from WindowsXP. From the Windows 7 box I am able to see the printer in a webpage (using the URL). But when I use the same url in the Add Printer Wizard the system says that it couldn't find the printer.
I'm setting up a Linux machine thet'll be shared by several users, some of whom will be admins. Is there a way to restrict access to a user's home folder (encrypt or block completely) for other regular/admin users?
