Ubuntu :: Add AD Domain Printer In 10.04 / Access Is Denied?
Sep 22, 2010
Using Ubuntu 10.04
I am trying to use the network printers shared within my University's AD domain. In Windows XP, I simply went to 'run' and typed "\[domain]", then it asked for my ID and passwords and list of printers came up from which I could just pick and add to my printer list. How can this be achieved in Ubuntu 10.04?
What I tried:
System->Administration->printing->Add->Network Printer -> Windows printer via Samba -> Browse, then I see the domain but when I input my id, domain name and password, access is denied...
View 5 Replies
ADVERTISEMENT
Aug 4, 2009
I have a linux domain (FEDORA CORE 1) and two laptop's which are part of my domain with windows xp pro service pack 2.I have given two ip's to both the laptop's being primary as global and secondary as local.I have configured printer in one laptop and shared.Till last week i was accessing that shared printer from my other laptop and every thing was working fine.Last week i formatted one laptop,(which dose not have shared printer) from then onwards i am not able to access my other laptop. I get the following message when i try to accessmy other Laptop,"you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permission there are currently no logon servers available to service the logon request"P.S : If i have only local IP i am able to see both the systems and i am able to access my printer, this problem comes only when i add global IP to both the machines.And also i have stopped the firewall and other things.
View 1 Replies
View Related
Nov 25, 2008
I have a OpenSUSE 11 machine set up as a domain controller. I have set my printer up to be shared to Windows machines logging into the domain. I was able to install the printer to my Windows machines. When you go to the printers folder in Windows, it shows the printer but says "access denied" instead of the usual "ready". If I print to the shared printer the job will go through. I am thinking it is an authentication issue because if I log into Windows machine as "root" and let it build a profile, the printer doesn't show the "access denied" message. How do I allow other users to have access to the printer?
View 1 Replies
View Related
May 13, 2010
The company I work for, as usual, is Microsoft-centric. I'm attempting to integrate my Ubuntu server into the domain to allow domain users to authenticate to the server and access file shares using Samba. Here's my current configuration:
[Code].....
View 9 Replies
View Related
Jun 8, 2011
I want to implement POSTFIX as our MAILSERVER.I have a couple questions some I already posted here now theres another error regarding on sending recipient in other domain like yahoo.com...using postfix server detected that i have an error on relay which is denied in other domain name...can anyone guide me how to fix it I think i have to update my main.cf.
View 3 Replies
View Related
Feb 18, 2010
In the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?
View 1 Replies
View Related
Mar 26, 2010
I'm having a problem with my webdav share. I have a secure webdav folder that gets accessed via a non-standard port and requires basic authentication. I can connect and interact with it fine via cadaver. However, when I try to connect from nautilus, it says "Access was denied." To make it even stranger, sometimes I can click on the folder in nautilus (it still mounts) and access it. Sometimes not (just repeats the error message and won't show me the contents). I may not even un-mount it, but just look at other folder, then click it again and be able to access it, but again - only rarely.
I asked a friend to try connecting from his windows vista computer and it would not work. It would not work from my windows XP virtual computer either. However, it mounts and works just find from my work computer (also Windows XP).
So it seems to be a 50/50 chance that the drive will mount on any given computer/system and work. Do anyone know what the problem may be? I'm guessing user permissions, but I can't figure out what.
I've made sure the webdav folder is owned by www-data and www-data has read access to the password file as well.
When I try connecting from nautilus, I get this in the log file:
Code:
Here is one of the (many) sites I've tried looking at: [url]
View 4 Replies
View Related
Sep 11, 2010
i put a windows program on my ubuntu pc and it's a portable program so i had to add a shortcut to the menu myself, well, i got the shortcut added but when i click it, it says that it cannot access it and it also says Permission Denied.
View 7 Replies
View Related
Aug 24, 2010
I configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
View 1 Replies
View Related
Mar 11, 2010
I have two external hard drives. One is a 2.5" 80GB USB HDD and the other is a Seagate 3.5" USB 500GB HDD. Both hard drives are mounted properly and I can access the data on both hard drives. I can access the small 80GB HDD via ssh from another computer and delete files, but when I try to access the 500GB drive via ssh it says access denied. When I try to access it with root, I can access it but I cannot see any files listed.
View 5 Replies
View Related
Jul 21, 2010
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies
View Related
Jan 27, 2010
Today I tried to move an amsn skin into the right folder but the following message appears:
Access denied to /usr/share/amsn/skins/aMSN Live-1.0.
I am the only user on this computer so I think I have all rights?
permissions of the destination folder > owner: can view & modify content.
View 4 Replies
View Related
Oct 26, 2010
Just got a new one, using 64 bit 10.04(LTS), firefox, also got on other computer using 32 bit 10.10
This one is for CNN, also have for Foxnews and a couple of others
Access Denied (policy_denied)
Your system policy has denied access to the requested URL.
For assistance, contact your network support team. [/COLOR]
View 6 Replies
View Related
Jun 3, 2010
When attempting to check my postfix install by using telnet to send an email to an address outside my local network, I get a relay access denied error.
This is how I attempted to send an email
Code:
telnet my_server 25
helo my_server
mail from: me@my_server
rcpt to: me@gmail.com
[Code].....
View 9 Replies
View Related
Jul 9, 2010
Setup an Ubuntu LAMP server to house a Wordpress site. Everything is gravy but I am having some troubles getting emails to route outside my local network. I have setup Internet and also added my ISP SMTP as a smarthost - either way I get the dreaded Relay Access Denied 5.7.1.
I am using DynDns as I do not have a static IP - not sure if this makes a difference?
telnet my_dyn_dns.org 25
ehlo localhost
250-my_dyn_dns.org
250-PIPELINING
250-SIZE 10240000
[Code]....
I have also tried the above with my ISP smtp IP in relayhost - same error.
View 2 Replies
View Related
Sep 25, 2010
I have been trying to run the following commands several times in the last coupl weeks, to no avail."su" to get to root...then while root "apt-get update" for updatesalso"sudo apt-get update"BOTH areenied even with root or user-admin pwd.States that either permission is denied and/or frequently states that the command "apt-get" does not exist
View 4 Replies
View Related
Nov 7, 2010
I recently installed 64-bit Ubuntu Maverick. This was a clean install as opposed to an upgrade. Since the install I have been having a heck of a time getting a remote filesystem mounted via nfs. The file system I have been trying to mount is located on my HDX-1000 media server. This machine is running a flavor a linux as it's operating system, and I have been using it for about 2 years now. I have been able to mount it's filesystem on all other machine in my house which include Windows 7, and a couple of earlier versions of Ubuntu linux. But I just could not get it to mount using Maverick. I kept getting the "mount.nfs access denied by server while mounting ..." message. Finally, I found a list of all the different parameters that can be specified on an entry in the fstab. The one that worked for me was simply to change the fstab entry from this:
Code:
HDX-Server1:/share/media/HDX-Server1 nfs rw,rsize=8192,wsize=8192,intr
to this:
Code:
HDX-Server1:/share/media/HDX-Server1 nfs rw,rsize=8192,wsize=8192,intr,nfsvers=3
That is one more little gremlin down. Just 34,689 to go.
View 2 Replies
View Related
Feb 8, 2011
I've set up Ubuntu Server 10.04 LTS 64-bit. I've set up zfs-fuse and created a zpool named 'data' which contains two 2TB WDC Green HDD's in raid1 (mirror). I've set up an NFS server to share the pool. So far so good. But now, I want to write to the pool. It has occurred to me that I need to be root to do that. On the server, this is not a problem (sudo cp...) but on my laptop I can not copy anything to the pool because I'm not a superuser.
View 1 Replies
View Related
Feb 22, 2011
I am using ubuntu 10.10. when I am using Codeblocks IDE it says that, permission :access is denied. When I try to run e .cpp code it occures. I think permission is denied on my HDD. How to make all of my HDD permitted when in Ubuntu....
View 4 Replies
View Related
Apr 14, 2011
There is a simple select query in a.php. If i run directly a.php, there is no problem but if i call a.php from b.html with ajax i have Access denied for user 'www-data'@'localhost' (using password: NO)error.
View 2 Replies
View Related
Aug 18, 2010
I have setup my own home server . All the applications are working perfectly except one I can't send Emails. I check weda my smtp has any errors not welll I got this
Code:
SMTP -> FROM SERVER:
220 server1.example.com ESMTP Postfix (Ubuntu)
SMTP -> FROM SERVER:
[code]....
View 1 Replies
View Related
Oct 21, 2010
I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines
Code:
And
Code:
eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT:
Code:
Code:
But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?
View 1 Replies
View Related
Dec 26, 2010
I had 10.04 set up in my computer so that I had two folders in home, they connected to folders in a windows 7 computer by adding the following to the fstab file:
Code:
//10.0.0.80/Movies /home/loco/Videos/Movies cifs username=guest,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
[code]....
View 7 Replies
View Related
Feb 16, 2011
Cannot seem to use my mysql password, keep getting the error
"Access denied for user 'root'@'localhost' (using password: YES)"
So I tried checking my password using mysql -u root -p and I get the same error as above. I've tried accessing mysql with skip grant tables disabling the need for a password so I could reset my root password. After going through the necessary steps I still get the error above when typing my password in for mysql.
View 4 Replies
View Related
May 2, 2011
My laptop is a STAMP, 1.6GHz, P4, RAM 1GHz, onboard Intel sound/video etc. There were two partitions, C: drive and D: drive. I had Ubuntu 10.10 and no other O/S installed.
I installed 11.04 Beta from a Live CD Alternate last week and have since upgraded a couple of times to what must now be the LTS. Lots of good stuff and it's why I'm a committed user. I have two problems:
In the install, I kept the two, almost equal partitions (each about 36GB) as well as the Swap of about 3.3GB. The previous format had been Ext4 and NTFS; I now reformatted and made them both Ext4.
The C: has of course all the system and apps, with the basic folder structure HOME, etc. In trying to set up certain programmes to 'Save to' the D: - or indeed just trying to copy/move anything into it, I get: - "Error ... Access denied. Could not write to ... etc. OR ... etc does not exist"!
I've checked under the 'System/Administration/Users & Groups/ Users Settings/Group Settings. For Root, I've entered myself - who should have anyway had Administrator privileges. Also rebooted, but still no change.
What must I do to get use of my D: drive?
View 4 Replies
View Related
Jun 25, 2011
I am looking for a file monitor to tell me when a file was attempted to be accessed, but was denied. A windows equivalent could be the auditing feature in server 2k3. I don't know which account or which file is attempting to access or be accessed, but I was hoping something built into Linux would support some sort of file auditing for security purposes.
View 2 Replies
View Related
Sep 1, 2011
How yo get ride of access denied 404/403 for localhosts other folders? i am using lamp and trying to access my site which is placed in a folder wthin the document root. but its showing access denied. how i can edit permissions?
View 3 Replies
View Related
Jan 13, 2010
I am up and running. Symptom: webapp/servlet deployed to Tomcat, utilizes JDBC driver for MySQL connectivity. Upon launching application in browser and performing action requiring database interaction, exception thrown, server log:
[Code]...
View 1 Replies
View Related
Jan 21, 2010
I just finish tring to get my mail server running but I get an error in my mail.log
Jan 21 16:33:08 server imapd-ssl: Connection, ip=[::ffff:67.223.78.XX]
Jan 21 16:33:08 server authdaemond: failed to connect to mysql server (server=127.0.0.1, userid=postfixadmin): Access denied for user 'postfixadmin'@'localhost' (using password: YES)
Jan 21 16:33:08 server imapd-ssl: LOGIN FAILED, user=jason@[mydomain].com, ip=[::ffff:67.223.78.76]
Jan 21 16:33:08 server imapd-ssl: authentication error: Input/output error
I have the right password in all the mysql config files and tried to reset the password in the sql database with no luck. I granted perms to all and its still giving me the error.
View 1 Replies
View Related
Mar 31, 2010
I have a network drive setup on windows to a samba share that is on ubuntu 9.1. The folder im connecting to has a couple symbolic links setup and all of them give me an Access denied error when I try to open them. I have dont everything I can think off including chowning all the folders to the user that Im logged in as and doing chmod 777 on all folders and files. I have tried deleting the link and recreating it and nothing works. This was working fine a few days ago and now it doesn't.
View 2 Replies
View Related
