i put a windows program on my ubuntu pc and it's a portable program so i had to add a shortcut to the menu myself, well, i got the shortcut added but when i click it, it says that it cannot access it and it also says Permission Denied.
View 7 RepliesI'm having a problem with my webdav share. I have a secure webdav folder that gets accessed via a non-standard port and requires basic authentication. I can connect and interact with it fine via cadaver. However, when I try to connect from nautilus, it says "Access was denied." To make it even stranger, sometimes I can click on the folder in nautilus (it still mounts) and access it. Sometimes not (just repeats the error message and won't show me the contents). I may not even un-mount it, but just look at other folder, then click it again and be able to access it, but again - only rarely.
I asked a friend to try connecting from his windows vista computer and it would not work. It would not work from my windows XP virtual computer either. However, it mounts and works just find from my work computer (also Windows XP).
So it seems to be a 50/50 chance that the drive will mount on any given computer/system and work. Do anyone know what the problem may be? I'm guessing user permissions, but I can't figure out what.
I've made sure the webdav folder is owned by www-data and www-data has read access to the password file as well.
When I try connecting from nautilus, I get this in the log file:
Code:
Here is one of the (many) sites I've tried looking at: [url]
I configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
View 1 Replies View RelatedI have two external hard drives. One is a 2.5" 80GB USB HDD and the other is a Seagate 3.5" USB 500GB HDD. Both hard drives are mounted properly and I can access the data on both hard drives. I can access the small 80GB HDD via ssh from another computer and delete files, but when I try to access the 500GB drive via ssh it says access denied. When I try to access it with root, I can access it but I cannot see any files listed.
View 5 Replies View RelatedI have a linux domain (FEDORA CORE 1) and two laptop's which are part of my domain with windows xp pro service pack 2.I have given two ip's to both the laptop's being primary as global and secondary as local.I have configured printer in one laptop and shared.Till last week i was accessing that shared printer from my other laptop and every thing was working fine.Last week i formatted one laptop,(which dose not have shared printer) from then onwards i am not able to access my other laptop. I get the following message when i try to accessmy other Laptop,"you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permission there are currently no logon servers available to service the logon request"P.S : If i have only local IP i am able to see both the systems and i am able to access my printer, this problem comes only when i add global IP to both the machines.And also i have stopped the firewall and other things.
View 1 Replies View RelatedI have installed KlamAV just in case and am now proceeding with scanning. However, a few directories showed up in pop-ups non-accessible and at about 5% a whole sequence of such. I also remember this "access denied" occurring when I tried to change something in the Administrator menu, although I can't remember what
View 7 Replies View RelatedI added my wife to my system and gave her adm admin access. I compared my access to her's and it is the same. Yet, when I log on as her, the 1TB USB drive does not show up in Places.
I tried mounting it and it said it was already mounted in /media/FantomDid find with "ls" command that is indeed mounted there, but since it doesn't show in Places, it cannot be accessed.Been searching and hunting and cannot find out why this is. If I would have made up her userid from the start, I wouldn't have this problem, but since Ijust added her,I cannot find a way to get her UID to "see" the Fantom USB drive
I'm trying to set up the following "server" system. (I say "server" because I'm really running ubuntu-desktop 10.04 LTS):
I have set up Samba and allowed guest access to my /media/Share/data using Windows 7. Everything works great, I can create folders, add files, etc. However I noticed that when I add files or folders via my mapped drive in Windows 7, it defaults to permissions that do not allow Deluge to access them. I realized that if I go back to the server and give it
Code:
sudo chmod 0777 /media/Share/data/(folder or file)
Deluge can now access the files. I don't want to have to modify permissions every time I add a new torrent to Deluge's watch folder which is /media/Share/data/Torrents.
How do I configure Samba (or linux, or windows) to give rwx permissions when I add a file or torrent via windows? And vice versa, if deluge downloads a file and moves it to completed downloads (which I haven't been able to get this far yet) will I be able to access it via Windows 7?
I have added a new user by following command :
root# useradd -u 100 -g 120 -d /product -s /bin/bash sandesh
I am not able to access it in /export/home directory..?
I don't know where I did wrong, but it seems , now, I don't have the panel, I dont have the top panel, I can't access using the shortcut key, and I don't know what to do now. I tried to remove everything that are related to unity. and install it back , but with no avail. No I log into my ubuntu with ubuntu classic.
here is the screenshot if I log into Ubuntu session When I want to log out from the session I need to Ctrl+Alt+Backspace
Today I tried to move an amsn skin into the right folder but the following message appears:
Access denied to /usr/share/amsn/skins/aMSN Live-1.0.
I am the only user on this computer so I think I have all rights?
permissions of the destination folder > owner: can view & modify content.
Just got a new one, using 64 bit 10.04(LTS), firefox, also got on other computer using 32 bit 10.10
This one is for CNN, also have for Foxnews and a couple of others
Access Denied (policy_denied)
Your system policy has denied access to the requested URL.
For assistance, contact your network support team. [/COLOR]
When attempting to check my postfix install by using telnet to send an email to an address outside my local network, I get a relay access denied error.
This is how I attempted to send an email
Code:
telnet my_server 25
helo my_server
mail from: me@my_server
rcpt to: me@gmail.com
[Code].....
Setup an Ubuntu LAMP server to house a Wordpress site. Everything is gravy but I am having some troubles getting emails to route outside my local network. I have setup Internet and also added my ISP SMTP as a smarthost - either way I get the dreaded Relay Access Denied 5.7.1.
I am using DynDns as I do not have a static IP - not sure if this makes a difference?
telnet my_dyn_dns.org 25
ehlo localhost
250-my_dyn_dns.org
250-PIPELINING
250-SIZE 10240000
[Code]....
I have also tried the above with my ISP smtp IP in relayhost - same error.
Using Ubuntu 10.04
I am trying to use the network printers shared within my University's AD domain. In Windows XP, I simply went to 'run' and typed "\[domain]", then it asked for my ID and passwords and list of printers came up from which I could just pick and add to my printer list. How can this be achieved in Ubuntu 10.04?
What I tried:
System->Administration->printing->Add->Network Printer -> Windows printer via Samba -> Browse, then I see the domain but when I input my id, domain name and password, access is denied...
I have been trying to run the following commands several times in the last coupl weeks, to no avail."su" to get to root...then while root "apt-get update" for updatesalso"sudo apt-get update"BOTH areenied even with root or user-admin pwd.States that either permission is denied and/or frequently states that the command "apt-get" does not exist
View 4 Replies View RelatedI recently installed 64-bit Ubuntu Maverick. This was a clean install as opposed to an upgrade. Since the install I have been having a heck of a time getting a remote filesystem mounted via nfs. The file system I have been trying to mount is located on my HDX-1000 media server. This machine is running a flavor a linux as it's operating system, and I have been using it for about 2 years now. I have been able to mount it's filesystem on all other machine in my house which include Windows 7, and a couple of earlier versions of Ubuntu linux. But I just could not get it to mount using Maverick. I kept getting the "mount.nfs access denied by server while mounting ..." message. Finally, I found a list of all the different parameters that can be specified on an entry in the fstab. The one that worked for me was simply to change the fstab entry from this:
Code:
HDX-Server1:/share/media/HDX-Server1 nfs rw,rsize=8192,wsize=8192,intr
to this:
Code:
HDX-Server1:/share/media/HDX-Server1 nfs rw,rsize=8192,wsize=8192,intr,nfsvers=3
That is one more little gremlin down. Just 34,689 to go.
I've set up Ubuntu Server 10.04 LTS 64-bit. I've set up zfs-fuse and created a zpool named 'data' which contains two 2TB WDC Green HDD's in raid1 (mirror). I've set up an NFS server to share the pool. So far so good. But now, I want to write to the pool. It has occurred to me that I need to be root to do that. On the server, this is not a problem (sudo cp...) but on my laptop I can not copy anything to the pool because I'm not a superuser.
View 1 Replies View RelatedI am using ubuntu 10.10. when I am using Codeblocks IDE it says that, permission :access is denied. When I try to run e .cpp code it occures. I think permission is denied on my HDD. How to make all of my HDD permitted when in Ubuntu....
View 4 Replies View RelatedThere is a simple select query in a.php. If i run directly a.php, there is no problem but if i call a.php from b.html with ajax i have Access denied for user 'www-data'@'localhost' (using password: NO)error.
View 2 Replies View RelatedI have setup my own home server . All the applications are working perfectly except one I can't send Emails. I check weda my smtp has any errors not welll I got this
Code:
SMTP -> FROM SERVER:
220 server1.example.com ESMTP Postfix (Ubuntu)
SMTP -> FROM SERVER:
[code]....
I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines
Code:
And
Code:
eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT:
Code:
Code:
But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?
I had 10.04 set up in my computer so that I had two folders in home, they connected to folders in a windows 7 computer by adding the following to the fstab file:
Code:
//10.0.0.80/Movies /home/loco/Videos/Movies cifs username=guest,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
[code]....
Cannot seem to use my mysql password, keep getting the error
"Access denied for user 'root'@'localhost' (using password: YES)"
So I tried checking my password using mysql -u root -p and I get the same error as above. I've tried accessing mysql with skip grant tables disabling the need for a password so I could reset my root password. After going through the necessary steps I still get the error above when typing my password in for mysql.
My laptop is a STAMP, 1.6GHz, P4, RAM 1GHz, onboard Intel sound/video etc. There were two partitions, C: drive and D: drive. I had Ubuntu 10.10 and no other O/S installed.
I installed 11.04 Beta from a Live CD Alternate last week and have since upgraded a couple of times to what must now be the LTS. Lots of good stuff and it's why I'm a committed user. I have two problems:
In the install, I kept the two, almost equal partitions (each about 36GB) as well as the Swap of about 3.3GB. The previous format had been Ext4 and NTFS; I now reformatted and made them both Ext4.
The C: has of course all the system and apps, with the basic folder structure HOME, etc. In trying to set up certain programmes to 'Save to' the D: - or indeed just trying to copy/move anything into it, I get: - "Error ... Access denied. Could not write to ... etc. OR ... etc does not exist"!
I've checked under the 'System/Administration/Users & Groups/ Users Settings/Group Settings. For Root, I've entered myself - who should have anyway had Administrator privileges. Also rebooted, but still no change.
What must I do to get use of my D: drive?
I am looking for a file monitor to tell me when a file was attempted to be accessed, but was denied. A windows equivalent could be the auditing feature in server 2k3. I don't know which account or which file is attempting to access or be accessed, but I was hoping something built into Linux would support some sort of file auditing for security purposes.
View 2 Replies View RelatedHow yo get ride of access denied 404/403 for localhosts other folders? i am using lamp and trying to access my site which is placed in a folder wthin the document root. but its showing access denied. how i can edit permissions?
View 3 Replies View RelatedI have installed Nginx with PHP-FPM on Debian 8 to learn more about Linux permissions. Nginx is run as www-data user.
I have created a simple PHP script that outputs the date. I have set the permission as 000 (no permission at all) and it is root:root. How come I can still run this script in the browser without getting access denied? The script is inside a folder with world execution. When removing the world execution permission, the script can't be run. How does this all connect to each other?
My program tries to open serial port on Fedora 12, and shows "Access denied" on Open Port operation. The same program runs successfully with root rights. What can I do to get COM port access as regular user?
View 2 Replies View RelatedI am somewhat new to Fedora, only having F13 for 2 months and F12 about a year ago on my dieing AAO. Anyways...I am trying to get the Apache web service up and running. Type in http://localhost and I get the Apache welcome screen. Now I try to add my webpages to /var/www/html/ and it says Error Moving File: Access DeniedI tried to find where to login in as root and find nothing. I am VERY unfamiliar with command line prompt other than for the yum installs
View 7 Replies View Related