Ubuntu Networking :: Remote Desktop Access "Your Desktop Is Only Reachable Over The Local Network. Others Can Access Your Computer Using The Address 127.0.0.1 Or Tabatha.local"
Feb 19, 2010
Running Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.
When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.
I installed a fresh copy of Ubuntu 11.04 on my server about 2 weeks ago, I setup remote desktop and figured to just leave the password field out as it suppose to be pre-configured to only accept local connections, well, apparently not. I was noticing some strange network activity and checked my router connections and sure enough I see port 5900 to the server, open vino icon and see that there is someone else connected! (IP of unauthorized user: 77.29.51.239 ).. Immediately kick them and set a password. This should really be addressed and/or a password should be defaulted or at the very least the "Your desktop is only reachable over the local network." should be removed.
The desktop computer stores most of our family's files and is mostly powered on, installed with Debian/openSUSE (KDE4).
We have 2 more portable (also Linux, KDE4) computers and frequently need to access files stored in the desktop. Currently file transferred is by usb thumbdrive which is troublesome.
The computers are all connected to a wireless router that provides access to the internet.
Reading/goolging and understand that there are many ways to share files to the extend that I am lost - Samba, NFS, SSH .....
My problem is to find out: What is the best way to access computers within the local network? "Best" here means:
- Secure
- Relative ease to setup
- Easy to use, file access with GUI (file manager?) as the entire family is using the computers.
I have Ubuntu 10.04 (fresh install) and it is my work computer/Server and i'd like access to this PC from my home. But with Remote Desktop it only says i can do local.
I've look around and opened up port 5900 in my router. Set this IP to to static and forwarded the port to this computer.
I've read that unchecking the "configure network automatically to accept connections" as it seems to cause an issue in ports i've read. Still nothing.
Here is a screen cap of my settings
Uploaded with ImageShack.us
How can i allow access from my Windows Based PC to this computer over the internet?
My linux PC is connected at work and I was able to configure the IP to connect to the network. I need a way to access the linux computer from other windows PC in the office via shared folders and or remote desktop. I am stumbling upon "VNC" on google.
I'm trying to setup an Apache webserver on my computer in order to practice HTML5/CSS3 for an upcoming competition I'm in. I'm able to access my site from inside my network, but I cannot outside my network. I've had several people try, and they all report that the server just times out. I'm running Ubuntu 10.04 and Apache 2.2.17
my g/f was able to access her jobs computers from home in Windows. she'd go start->program->access->connect to remote desktop... (or something like that) in any event, i've found some programs in Fedora 14 that say they'd do the same, however i can't get it to work. in "remote desktop viewer" i'm trying to use 'VNC' protocol,and trying to put the ip in the first of the "Host" lines.
now, there might be another issue, is it possible she need more info than the ones she got in order to use LINUX remote desktop? she has (what she has written down as) Computer # 111.111.111.11 and then ';' and 4 additional numbers, so (for the sake of the example) computer#: 111.111.111.11;2222 she has a 'username' and a 'password'.
I just set up Remmina the other day to be able to access my desktop remotely. However, I can only do this when I am connected to my home network. Is there a way to set up Remmina so that I can connect to my desktop remotely from outside my home network?
I'm using a fingerprint reader on my laptop, works pretty well:
Code: $sudo echo hi Please swipe your finger: [swipe finger here of course]
[Code]....
Like I said, it works nicely... until I try to SSH in and sudo something remotely, when it will ask me kindly to swipe my finger over the reader that's attached to the laptop which is on my desk at home thirty kilometres away. Naturally there's no method built into pam_fprint to abort via a keypress.
So, is there any way to tell PAM to only use certain modules if I'm in a locally logged in session?
New Fedora 13 Install. I have Remote Desktop Enabled. I can access the machine from itself but not others on the network. I stopped the firewall, that did not work. I looked in hosts.allow and hosts.deny, no entries there. The vino server is running. There is nothing in /varlog/messages, dmesg or /var/log/secure, at least nothing I could find related to vino. What else can I check? The conf file in my home folder looks exactly like one on another machine where it is working. forgot to add the message I get when I try it from a remote machine is "The connection to host 192.168.1.100 was closed". So it appears something is actively rejecting the login.
They are running Kubuntu. How to access their desktop from my home or office using Internet. Logically I remembered about kfrb and X11-vnc. But both of them need some approach to provide security. I'd like if someone could give me some pieces of advice on choosing the simplest and better approach:
To secure kfrb or x11-vnc is simpler or better to mount a vpn or to use an ssh tunnel? Is there any other solution? My pearents ISP use DHCP, so I think it would require some service like dyndns or similar...
I have 4 boxes on a local network: 2 with XP only, 1 with Ubuntu 9.10 only, and 1 with both. All boxes can share folders, set up with share-admin instead of using Nautilus right-click properties for each folder. I can see and control the remote desktops on all boxes, to all other boxes, from all other boxes,with one exception: I can only access the XP desktop on the dual boot box, not the Ubuntu desktop. When I try I get: "Connection to host 192.168.1.102 was closed." I am refused access to the Ubuntu desktop in this manner from both the other Ubuntu machine, and from both XP machines.
My setups are basically plain vanilla with routine installs of Ubuntu 9.10. On the XP machines I am using TightVNC on the XP machines to view both other XP desktops, and the Ubuntu desktop that is accessible. On both Ubuntu setups I am using (I suppose) vino and vinagre, and have completely re-installed what I think is the relevant software. There is no firewall running on the Ubuntu dual boot, when I check ufw. For reasons I cannot determine the inaccessible Ubuntu desktop is not providing its own address but instead in the Remote Desktop config dialogue it identifies itself as 27.0.0.1 which I think is the loopback id. I know so little about this sort of networking that I am not giving all relevant info, but I still thought I'd try.
I would like to know how can I have remote desktop to a Linux Box without any disturbance of local user or others who logged in like me .I mean exactly like remote desktop in windows 2003 or 2008 which every users who logged in remotely has it's own desktop without any disturbance of others. and is this possible to do it from fedora to ubuntu and vice versa .
Setting up desktop (9.04) behind router for remote access by latptop (9.10) I am setting up desktop (9.04) behind router for remote access by latptop (9.10). Rationale: All of my files are on my desktop HD, but I am often out of my home needing to work on my files. It is becoming labour intensive to keep track of the files I make/change and try to copy them on my non-connected desktop/laptop.
Dream: Able to remote access and modify my desktop files from my laptop (while the files remain on the desktop). Request: A simple, GUI, basic, non-technical guide how to set it up!
What I know: 1.I was going to use the 'Remote Desktop' VNC connection under System->Preferences. However, if I understand this correctly, this only secures my computer (i.e. Locks the front door of my desktop) and the data streamed between them is not encrypted.[URL]..
2.Then I need to set up my router to accept the connection from my laptop.
3.Then I will need to use SSH to secure the info sent between them. This is the bit I don't really have a good grip on.
Alright so i just wanted to try and get remote desktop connections running so i can access files on the other computers in my house. For my first try i went after my laptop. I'm using rdesktop.
First couple times i tried i typed in
Code:
After about 15 seconds it would pop back with
Code:
I realized that my laptop's firewall was blocking the packets, so i created a custom rule that allows all TCP packets on port 3389. So i fired up rdesktop again. Now it pops back with:
Code:
But instantaneously, not after 15 seconds (not sure if thats significant or not.) I checked my firewall's log and it allowed the tcp packets.
I recently setup motion on one of my computers with a USB camera. On that computer if I type [URL] I can see my live video. If however I type [URL] on that computer or any other on my wireless network, I get a page cannot be displayed. I checked that UFW was disabled and I am able to ping the motion computer from any other computer on my network. Also I am not sure if it matters but I do have apache installed on my motion computer as well. why I cant view my live video from different computers I am using Ubuntu 10.4 on all computers
I couldn't find an answer to this question (not including vpn) on different threads so decided to eventually post it, though it's probably easy one. I would like to connect to some application on known IP and port in the internet from my LAN computer. However to do so (I have some application, not any administrative constraints or not being allowed to) I would like to use local addresses. So, let's say - I want to connect to the external host VV.XX.YY.ZZ, port AA using 192.168.EE.FF port BB. Baically so far I have limitation in my application (too many places for possible error, to correct it right now - will change it in future). Is it possible that after my application sends request to 192.168.1.EE port BB, my Linux transparently translates it to VV.XX.YY.ZZ:AA? I tried iptables tutorials and some forums, but nothing seems to be addressing this issue. I don't know if it's event possible with iptables but am pretty sure this should be possible.
I am at a loss. I can not access my work remote desktop via the terminal server client on my wired box running Ubuntu 10.10. My wireless laptop is able to connect right away once I established the VPN connection. The VPN connection is established on both boxes with no problems.
When I tried the Terminal Server Client on my wired boxed, it says it can not establish a connection. Yet my wireless box gets connected immediately!
I check the /etc/dhcp3/dhclient.conf and the /etc/resolv.conf to see if there were any differences, but they are essentially the same. When I have the vpnc connection, they both recognize it and I am able to ping the IP address shown when I do a "ifconfig" on the terminal.
What can be the problem? Anything I need to configure on a wired computer versus a wireless one? What else can I check?
New XAMPP security concept: Access to the requested directory is only available from the local network. This setting can be configured in the file "httpd-xampp.conf". If you think this is a server error, please contact the webmaster.
I'm trying to set up a small Intranet system to run OpenERP or similar using browser-based clients. I have an Ubuntu machine running 10.04 desktop edition to act as a temporary/testing server until we set up a proper, dedicated machine with 10.04 server edition. I have installed Apache2 from the repos and it is up and running fine - locally. That is the problem, I can't access the server from other machines on the LAN. Ping works, btw. So I've been reading tutorials and howtos for the past week, but for the life of me, I can't find what I'm doing wrong. The standard Apache setup seems to be made to "just work", so although I've looked at the various configuration files mentioned in the tutorials, I haven't actually changed anything.
I've been researching this all day with no luck thus far. Basically I need to cutoff port 21/ftp access from IP addresses outside of my local network. My local IP range is something like 192.168.0.100 - 192.168.0.150 -- so anything outside of this range would automatically be blocked.
Any IP address outside of this range would be denied as I use SFTP for remote access, etc. from home, etc.
I've researched IP tables, tcp wrappers, etc. but am still unsure which would be best for what is probably a simple fix.
I have a problem with my slackware 13.1 that is that i can�t access it outside my local network. It�s running behind a router and i have activated the DMZ to my slackware computer i can access the web with my slackware computer but i can�t get access to it outside my LAN.
I'm not really a newbee in Linux but I am a newbee in networking. I have both a Ubuntu laptop and a Gentoo desktop computer. I have just bought me the MBR1000 Cradlepoint router and it works great with my Verizon USB 760 modem plugged in it. I can now send and receive email on my Ubuntu laptop. I like it.My Gentoo desktop computer is just sitting there with no Internet access because my Verizon modem is no longer plugged into it but plugged into the router instead. Only my laptop now has Internet access. The laptop has an integrated wireless card built in the MB but my desktop has no such capability.
Is there a way (besides buying a wi-fi adapter) to get Internet access on my desktop computer through networking so that the router would give both computers Internet access at the same? My Gentoo desktop does have an ethernet adapter that perhaps I could useThe router has several LAN ports and one WAN port, both unused.
I have installed Ubuntu on four machines at work and have been blown away. On my machine I have Apache setup for web development and other machines can "see" it using my IP address. I would like to have it so they can access by the name of my computer though. I have no local DNS server so I guess I need to hard code the relationship in each machine? Ideally I'd actually like to be able to use subdomains (which I use locally to avoid annoying .htaccess path problems). i.e. from another machine on the network to go to [URL].
I have installed apache php and mysql on my pc during debian installation... some of my friends complain they cannot access my webserver from their home and it's available only within my local network... Please help regarding this...
i want to know mac address of a particular ip but the problem is that i am unable to ping that ip but that ip is being used by someone in my local network that i know from my proxy logs. i want to know the mac address of that ip,
I'd like a way to see all of the devices on my local network and what their local IP address is. I recall that I used wireshark to troubleshoot a similar problem a while back, but it doesn't seem to have a way to see all of the devices- only the traffic. (I'd like to do this without having to physically interface with my router if possible, and I am in an encrypted network if that matters)
