Installation :: Create Boot Choice Xp And Ubuntu?
Mar 25, 2010
I tried searching forums before posting, but it was hard to search due to the specific nature of what I want to do.
I have one hard drive with windows XP on it. Another with Ubuntu. As it stands there is no link between them. Is it possible to create a dual boot using these disks? - I do not want to reinstall any of them.
Preferably, I would like the boot choice (or booter? - not really sure what I'm talking about) to be on the newer Ubuntu drive.
It is on an old machine with 256MB Ram. So slow in fact, I'm going to change the desktop environment to Xubuntu - but that's mostly irrelevant.
As I understand it, I should make the Ubuntu drive master, XP as slave... but then what?
View 5 Replies
ADVERTISEMENT
May 16, 2011
So I'm currently On Windows XP professional and want to dual-boot with Ubuntu....
Right, so I downloaded first the ISO for ubuntu here: [URL]
And then proceeded to downloading the windows installer here: [URL]
However after "Successfully" Installing, I do not get a choice to boot from ubuntu on start-up...
I have tried several things;
Re-installing - To no effect Downloading EasyBCD, which tells me that I have No BCD file, and when I opened my Boot.ini file, it was blank... Also, there is no folder C:Boot....
Now I don't know what to do and am scared to re-start just incase it doesn't boot to anything...
View 8 Replies
View Related
Jun 20, 2011
Ubuntu and windows 7 were running in harmony prior to a reinstallation of windows 7. Earlier i would get a screen where i could select either windows or ubuntu to boot from. Now, however, my system seems to bypass that completely.
View 2 Replies
View Related
Nov 20, 2010
I just upgraded to 10.10 and now I am faced with a choice at boot up of which kernel I would like to boot (or recovery mode, or memtest).I am wondering how to default to the newest kernel without this prompt.
View 6 Replies
View Related
Jan 1, 2010
I was using Ubuntu 9.10, until I got a new graphics card (Nvidia GeForce 9800 GT). After I got that upgrade, Ubuntu no longer supported that card for some reason, so I decided to try Linux Mint since it was a close relative to Ubuntu. Still no support for the video card.
I've always wanted to try Fedora so I decided to grab the x86_64 live cd and burn it. I stick it into my disk drive and it boots where it shows me the options to "Boot" "Verify and Boot" "Boot from Hard Disk" and one other option.
I tried the Boot option, and after selecting that, everything stalls, and my display turns off (not the entire monitor, just the display). I tried Verify and Boot, and still no luck.
I have also tried the i686 live cd and the same issue. It can not be the way I am burning it, cause I've gotten other live cd's to work with the same method of burning. Is it that Fedora does not support the card?
I am trying to get the GNOME version up and running.
View 2 Replies
View Related
Jan 2, 2010
I just attempted to install ubuntu for the 4th and 5th time and have yet again had a fail. This time it actually completed the installation, which is a first. however upon reboot it takes me directly to Vista - I don't see grub or a o/s selection choice.
View 9 Replies
View Related
Dec 8, 2010
machine boots straight to Windows, Grub2 does not display the normal boot menu choices. Therefore, not able to boot into Ubuntu 9.10.Perhaps someone could look at this Results.txt file and shed some light on what went wrong.This machine was working fine for a long time, then all of a sudden, it starting booting straight to Windows.
View 9 Replies
View Related
Jan 5, 2010
I tried to do my parents a favor by installing Ubuntu 9.10 alongside WinXP on their PC -- same configuration I have on my desktop at home. The install went fine, but since I made a poor buying decision on purchasing a MSI motherboard in the past, Ubuntu immediately crashes after boot (other MSI board users having the same issue, no help from MSI).
The computer tries to boot Ubuntu by default unless something else is selected from the boot menu. How do I change the boot preference from default (choice 0) to WinXP? I tried manually changing this (editing the grub.cfg file), but the file said not to edit, that it's generated by something else...How do I have WinXP load by default instead of the broken Ubuntu?
View 8 Replies
View Related
Jan 22, 2011
When Starting Up My Computer It Automatically starts up Windows 7 Home Premium I didn't see a choice for which one to boot up with. I have it fully installed.
View 1 Replies
View Related
Jul 7, 2010
I put windows 7 on my desktop which is a dell E521. I had windows vista on their previously and had a dual boot setup on it. When I installed win 7 on I just did the upgrade so I wouldn't have to reformat my hardrive and now when I boot up it will not show the option to boot into windows or ubuntu.
View 6 Replies
View Related
Jul 4, 2010
I'm gonna setup a dual boot with Windows 7 on my system. My partition layout will be something like this:
Win7 -> ntfs
Ubuntu (root + home) -> ext4
Swap
Data (media & documents) -> ?
What file system should I choose for the data partition? If I go with ext3/4 it seems I can access them from Win7 using a file system driver, but it seems far from safe, from what google tells me. The driver installers aren't for Win7, and I need Ext4 without extents or an ext3-fs with an inode size of 128 to make it work at all. It saddens me to ask, but should I just go with NTFS?
View 7 Replies
View Related
Sep 24, 2010
I can't boot to a choice of guis in OpenSuse 11.3
can anyone advise me on my next move? code...
View 5 Replies
View Related
Oct 10, 2010
Just got a new laptop with Win7 and downloaded Ubuntu 10.10 to do a dual boot. Ran through the graphical installer setup my partitions and either I missed it or it did not give a choice of where to install Grub2.
Everything is working fine but of course Grub is my boot loader for Windows and Ubuntu which I do not like and never install that way. I have just had too many problems so I normally use EasyBCD.
So the question is, did I just miss the option to install Grub2 on the partition where my root is or did this option change? The last version I used was 9.10.
View 2 Replies
View Related
May 19, 2010
I installed Lucid Lynx in my p4:2.66 hz machine with XP sp3 pre-installed and the system booted just fine with dual boot option. Then I updated my Lucid. All updates were downloaded. But during update installation a power failure caused PC reboot. Again I started update manager and it gave me option for "Partial Upgrade". I did the same and it instructed me to reboot. The the real damn thing happens now when I rebooted, In the GRUB menu it showed only Memorytest options. I see no OS choice there, I tried to reinstall GRUB from live CD with mount options. And it showed no errors during the procedure. I rebooted but the same problem exists.
View 6 Replies
View Related
Jan 10, 2010
I'm trying to figure out if I can do a remote reboot (eg over ssh) and specify a new grub2 os choice for the next boot only (once), in order to boot windows remotely once, but then back to linux on the next reboot.I found this related post for grub, but won't work for grub2 ( I never tried it with grub for a remote reboot)[URL]which suggests changing the default menu option with the once flag:
[root@localhost ~]# echo "savedefault --default=2 --once" | grub --batch
[root@localhost ~]# reboot
I'm just starting to work with grub2 and am not at all clear whether I can do anything similar
View 4 Replies
View Related
Apr 21, 2010
I have a Samsung N110 running Windows 7 and I would like to install Ubuntu Netbook remix which I downloaded from [URL] I want to install it on the netbook in lieu of Windows so am not looking for a Live CD/USB option. I have run usb-creator.exe on my XP machine but no matter what I do I can't get the "make startup disk" to un-grey. I have selected the CD which contains the iso I unpacked, and it detects my USB drive (I:) which is 4Gb I had exactly the same problem at work when trying this with the .iso I downloaded so it isn't specific to this machine.
View 3 Replies
View Related
Mar 30, 2010
I installed Ubuntu 9.10 (desktop version) and it performs flawlessly. Now I want to add a second hard drive to the same box, install Ubuntu 9.10 *server* on it, and use GRUB to control which one boots.
Problem is, I'm a Windows pro but a Linux n00b. Should I disconnect the first hard drive (the one with Ubuntu desktop) before I do the server installation on the second (new) drive? Also, how do I edit GRUB's menu to offer a choice between the 2 OSes?
View 1 Replies
View Related
Jan 13, 2011
I am new user (or not yet) of ubuntu and this forum . I installed ubuntu via wubu instaler as program of windows xp but I cant run it . I dl-ed ubuntu made live cd , booting from dvd-drive is working normally , and my instalation via wubu was fine . Now when I start my pc choice is shown to me on desktop :
-Windows XP
-Ubuntu
But I cant make choice coz windows aint reacting on keyboard . Cant use my arrows to make choice . I got stuck here , I would like to install ubuntu as main OS but I think it is too early since I am newb and just started to learn pc science and programing . I hope to use it just as Windows program at the beggening .Later when I get used to it and learn how to properly install it as partition for itself I will do so .
View 3 Replies
View Related
Feb 22, 2011
I would like to install Ubuntu in a separate partition. I currently have Windows XP on the C drive.
I have the following config on my Presario Laptop:
60gb SATA hard drive
41.6gb available
3% fragmented
I would like to partition the hard drive to install Ubuntu as a dual boot. how I need to do this or point me in the right direction? I did begin an install from a cd I burned from ISO. I started by just going for the auto installation and what it recommended. However, when I tried to install, I got an error message that changes were uable to be written to disk and had to abort??
Assuming I can get past the error I would like to know how to create the partitions for root, home and swap and how much space for each.
View 2 Replies
View Related
Jun 16, 2010
I can't install with the ext3 or XFS file systems. It will only let me install with ext4. I have used both a live CD and USB.Someone help me find out what I am doing wrong, I would like to have my ext3!
-Fedora 13
-latest kernel
-used Live CD and Live USB (UNetBootin)
View 14 Replies
View Related
Apr 9, 2010
My buddy has a computer with a problem and hes asked me to see if I can retrieve the data documents from the computer. The subject computer is a COMPAQ PRESARIO SR5030NX with a Pentium 4 cpu, 3.2 GHz, 1 GB RAM, running Windows Vista Home Basic.
His goal was to create a dual boot computer UBUNTU and Vista. What he did was to install UBUNTU, partitioning the computer in two partitions. The computer is now giving an error code of 21 when GRUB Loader starts up. Is there a restore disk or some kind of utility that can undo what was done to the computer. He has no backup disk.
I tried Recovery Commander Ver. 3 made by Avanquest but as their website indicates it�s for XP. They never updated it for Vista and Windows 7. Is there a utility that can undo some of the changes that were made to the machine when UBUNTU was installed, albeit, unsuccessfully.
(1) I have an HP PC running XP professional and I was wondering if I take the hard drive out from the COMPAQ and rig it to my HP via a SATA/IDE to USB 2.0 Adapter device would I be able to see the contents of that COMPAQ computer that had Vista and now UBUNTU.
(2)What about attaching the COMPAQ internal hard drive and attaching it to my HP as a slave drive.
(3)Can the UBUNTU disk going to help?
Were just after the data files and not software programs.
View 2 Replies
View Related
Apr 29, 2010
I am trying to use Ubuntu for the 2nd time, I tried before with a different version buy gave in eventually as I couldn't create a bootable USB drive.
I have tried to create a USB boot from the USB Creator on the download it gets to 94% and fails with a chksum error, I have established that the file is indeed the right one.
What could the problem be? Im using a 1gb stick do you think it may be failing due to it been too small?
View 4 Replies
View Related
Jan 23, 2011
I had Ubuntu 10.04 on this machine and wanted to convert it to a dual boot. It's a 500GB hard drive. The HDD had 3 partitions: one really big one, and two swap areas of about 6 GB each. I ran GParter and carved the big partition into a 100GB partition and a 400GB partition (less the swap areas). Then I installed Windows XP into the 100GB partition, then installed Ubuntu 10.04, selecting the "create dual boot" option.
It dual boots beautifully, and everything runs just fine. But I find that Ubuntu has split the 400 GB partition into two 200 GB partitions, and one of them is simply off-limits. I can see it, but I can't write to it. The attached png shows the Disk Utility, with the mystery partition selected. Its only contents is a folder called lost+found; I cannot open it.
View 9 Replies
View Related
Mar 14, 2011
I've shrunk my Windows partition to ~200GB and made ~100GB of free space for Ubuntu BUT .. it doesn't allow me to create a new partition there as I already have 4 primary ones.Since all of the given partitions ( including Recovery and Tools ) can not be touched ( removed ), I have no idea on how to solve this ..
Code:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
[code]....
View 1 Replies
View Related
May 5, 2011
I have a Lenovo laptop with Windows 7 pre-installed. I would like to dual boot Win 7 and Ubuntu or Linux Mint.
In my old laptop I had an OEM Win XP disc that I bought specifically for dual boot purposes (didn't want the pre-installed vista). This only has a one PC usage though unfortunately.
how to make a windows 7 boot disk? I made a RECOVERY disk already, but I don't think that will work as a boot disk right? Particularly if I completely wipe out or swap out the HDD (which I might do).
fyi: I NEED Win7 for a few special programs for my school. WINE will not work and VirtualBox puts to much strain on my computer.
View 4 Replies
View Related
Aug 9, 2011
When you have boot troubles, you will often be asked to run Boot-Info-Script in order to see a summary of your boot parameters. Standard method is a little difficult, so I made a little GUI to do it very easily :
1) Boot on Ubuntu live-CD or live-USB. (or Boot-Repair-Disk which will lead you automatically to step 4)
2) Connect internet
3) Open a terminal and type :
Code:
sudo add-apt-repository ppa:yannubuntu/boot-repair && sudo apt-get update && sudo apt-get install -y boot-repair && gksu boot-repair
4) Click on "Create a BootInfo summary":
5) Done !
Now just indicate (or copy/paste) the URL that appears to people who help you on this forum.
View 9 Replies
View Related
Nov 21, 2010
A while ago I made the jump from Mandriva to Fedora. I am very pleased with Fedora, but some things do not seem to be as easy as with Mandriva. Maybe I just got to find my way around and am not aware there are packages that will do what I want, so I think it is a good idea to ask here..Well - I have a multi-boot system. There are a few partitions to test out different Linux versions (like specialised music distro's with low-latency kernels). As a result the MBR gets overwritten by other installs now and then.In Mandriva it was possible to create a simple boot disk without any images - just a "link" or "jump" to vmlinuz etc. on the root partition from the main Linux system. I think only the MBR part was written on the floppy. It was very easy done in the control centre by choosing fd0 in stead of hda as boot medium.
This disk whas a life saver if the MBR was overwritten by another OS intall. I just put in the floppy and boot from that floppy strait into the standard grub menu and so I was able to re-create grub (by doing the same process but pointing to hda in stead of fd0 as boot medium).
Is there a way to create the same simple boot disc under Fedora 14?
View 4 Replies
View Related
Jul 8, 2011
I already download Fedora 15 from website As ISO Image , How I can create Bootable CD Image? and it possible but it in USB as bootable
View 3 Replies
View Related
Apr 25, 2010
is there a way to create a cd or usb to boot and operate on a system with just ram and another solid state usb how custom the script??
View 2 Replies
View Related
May 12, 2010
This question has been raised several times I am sure but...
I would like to create a FULL recovery CD/DVD of my system with a boot restore...
Any recommended for Ubuntu 10LTE Server.
View 2 Replies
View Related
