Ubuntu Installation :: 10.04 - Create Dual Boot And Partition Locked
Jan 23, 2011
I had Ubuntu 10.04 on this machine and wanted to convert it to a dual boot. It's a 500GB hard drive. The HDD had 3 partitions: one really big one, and two swap areas of about 6 GB each. I ran GParter and carved the big partition into a 100GB partition and a 400GB partition (less the swap areas). Then I installed Windows XP into the 100GB partition, then installed Ubuntu 10.04, selecting the "create dual boot" option.
It dual boots beautifully, and everything runs just fine. But I find that Ubuntu has split the 400 GB partition into two 200 GB partitions, and one of them is simply off-limits. I can see it, but I can't write to it. The attached png shows the Disk Utility, with the mystery partition selected. Its only contents is a folder called lost+found; I cannot open it.
View 9 Replies
ADVERTISEMENT
Mar 29, 2011
I had dual boot on my Asus laptop, Windows and Hardy. Then my Windows XP crashed and the person who repaired installed Windows 7 but didn't preserve the dual boot prompt on startup. I've explored BIOS but there seems no way of accessing my Ubuntu partition that way.
View 9 Replies
View Related
Mar 14, 2011
I've shrunk my Windows partition to ~200GB and made ~100GB of free space for Ubuntu BUT .. it doesn't allow me to create a new partition there as I already have 4 primary ones.Since all of the given partitions ( including Recovery and Tools ) can not be touched ( removed ), I have no idea on how to solve this ..
Code:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
[code]....
View 1 Replies
View Related
Mar 20, 2011
(This is for a 100% Clean install)
Q1) I was wondering if it is possible to Dual boot Ubuntu with Windows XP on a 1TB RAID-0 setup ?
Q2) Also, is it possible to create a SWAP partition (for Ubuntu) on a NON RAID-0 HDD ?
Q3) Lastly... I read GRUB2 is the default boot manager... should I use that, or GRUB / Lio ?
I have a total of 3 HDDs on this system:
-- 2x 500GB WDD HDDs (non-advanced format) ... RAID-0 setup
-- 1x 320GB WDD HDD (non RAID setup)
(The non RAID HDD is intended to be a SWAP drive for both XP and Ubuntu = 2 partitions)
I plan on making multiple partitions... and reserve partition space for Ubuntu (of course).
I have the latest version of the LiveCD created already.
Q4) Do I need the Alternate CD for this setup?
I plan on installing XP before Ubuntu.
This is my 1st time dual booting XP with Ubuntu.
I'm using these as my resources:
- [url]
- [url]
Q5) Anything else I should be aware of (possible issues during install)?
Q6) Lastly... is there anything like the AHCI (advanced host controller interface) like in Windows for Ubuntu?
(Since I need a special floppy during Windows Install...) I want to be able to use the Advanced Queuing capabilities of my SATA drives in Ubuntu.
View 4 Replies
View Related
Mar 1, 2010
i want to dual boot, and create ubuntu on a second partition, and while im at it remove the windows partition that i dont use on here at all
also, i want to run chkdsk first, does anyone know how i can do that on linux?
View 6 Replies
View Related
Jan 3, 2010
I am new to linux. I tried and failed. I need some help on Creating patitions (I think it is root, swap and home).I have HP laptop with WIndows 7 installed. I have shrink the volume to allow Linux installation. I have three partitions, first one is windows boot - about 100MB. Second one is about 110GB and it has windows 7. Third one is UNALLOCATED space of 110GB that I intended for Suse.
Now I am going to install the Suse. The unallocated spaces should be "primary" or "extended"? Also, should I divided this new partition in to three partition? If does, what are sizes for each? I want to learn Linux so I will able to look for better job. This is the first time I ever look into linux and confused.
View 9 Replies
View Related
Jul 15, 2010
I have booted from the .iso cd I made on my Mac last night and was tempted to install it on a 6gb partition that I have on my main HDD but was a bit scared to go past the fourth (or so) step in manual installing where I pick that partition and *do what?* Is it going to install the OS on that partition and leave everything else alone to give me a dual booting PowerMac? It doesn't quite say. I am fearful of screwing up my little ol' machine. Can anyone direct me to something that gives a step by step in manual installation on an already created (HFC+) partition to create a dual booting PowerMac?
View 3 Replies
View Related
Jan 5, 2011
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies
View Related
Feb 22, 2011
I would like to install Ubuntu in a separate partition. I currently have Windows XP on the C drive.
I have the following config on my Presario Laptop:
60gb SATA hard drive
41.6gb available
3% fragmented
I would like to partition the hard drive to install Ubuntu as a dual boot. how I need to do this or point me in the right direction? I did begin an install from a cd I burned from ISO. I started by just going for the auto installation and what it recommended. However, when I tried to install, I got an error message that changes were uable to be written to disk and had to abort??
Assuming I can get past the error I would like to know how to create the partitions for root, home and swap and how much space for each.
View 2 Replies
View Related
Feb 15, 2010
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
View 2 Replies
View Related
Apr 9, 2010
My buddy has a computer with a problem and hes asked me to see if I can retrieve the data documents from the computer. The subject computer is a COMPAQ PRESARIO SR5030NX with a Pentium 4 cpu, 3.2 GHz, 1 GB RAM, running Windows Vista Home Basic.
His goal was to create a dual boot computer UBUNTU and Vista. What he did was to install UBUNTU, partitioning the computer in two partitions. The computer is now giving an error code of 21 when GRUB Loader starts up. Is there a restore disk or some kind of utility that can undo what was done to the computer. He has no backup disk.
I tried Recovery Commander Ver. 3 made by Avanquest but as their website indicates it�s for XP. They never updated it for Vista and Windows 7. Is there a utility that can undo some of the changes that were made to the machine when UBUNTU was installed, albeit, unsuccessfully.
(1) I have an HP PC running XP professional and I was wondering if I take the hard drive out from the COMPAQ and rig it to my HP via a SATA/IDE to USB 2.0 Adapter device would I be able to see the contents of that COMPAQ computer that had Vista and now UBUNTU.
(2)What about attaching the COMPAQ internal hard drive and attaching it to my HP as a slave drive.
(3)Can the UBUNTU disk going to help?
Were just after the data files and not software programs.
View 2 Replies
View Related
Jan 21, 2010
I'm trying to understand how I can partition my hard disk to allow for a dual boot (Windows & Ubuntu) as well as allow access to a certain set of files from both Windows & Ubuntu. So far I understand that I'll need:
1 Windows boot partition ~2-4GB
1 Linux boot partition ~2-4GB
1 Linux swap partition ~1-2 GB
But I don't know:How can I keep my non-boot linux files & folders -- /home, /usr, etc. -- separate from the boot files? Do I need another partition? If yes, what size & format -- FAT32, ext3, etc. -- should it be?
If I separate, for instance, the "/home" folder only where do the remaining folders and files reside?
How can I access certain files with both Windows & Ubuntu? Do I need yet another partition, formatted in FAT32?
View 2 Replies
View Related
Apr 24, 2010
I would like to install XP to /dev/sda5,sda6 being karmic. (I may have a dying dvd burner as was unable to install it yesterday but..) I got in a dreadful mess with grub after attempting to upgrade to Lucid,I needed to reinstall anyway. Will I be able to dual boot or should I just start from scratch?
View 4 Replies
View Related
Feb 18, 2010
I must say that until now I have worked with Win2000/Xp. Long time ago I worked with Xenix and in the last 2 month sometimes with Ubuntu.Now I have brought a new PC with 320Gb HD and 4 Gb RAM, and I wish to built a dual boot system, with Win7 and Ubuntu.
View 3 Replies
View Related
Feb 22, 2010
Absolute newbie to Linux (assume I'm a complete dummyhead. I don't understand anything about Linux.). Just bought 500GB HDD. Made 3 partitions, 1 for Linux, 1 for Windows, and 1 for data.
1st, installed Win XP on 2nd partition (NTFS)
Then installed 64-Bit Ubuntu on 1st partition (Ext4)
(Created a 2 GB partition and for the swap file.)
Not sure which partition is primary, extended, etc., never really understood all that stuff anyways. XP was working perfectly, till I installed Ubuntu. Now, it just boots straight into Ubuntu, doesn't give the option to boot into XP. Tried everything I know, but it will not give the option to go into XP.
View 9 Replies
View Related
Aug 4, 2010
I have created 5 partitions:2 GB ext320 GB ext310 GB ext320 GB ntfs400 GB ntfsI have already installed XP on 20GB ntfs. Will dual boot work if I use the 3 ext3 partitions to install Ubuntu?
View 4 Replies
View Related
Jan 30, 2011
I have Ubuntu 10.10 on my laptop currently and my mom would like to have it on hers as well. However, she does not want to get rid of Windows 7, or use Wubi (for some reason). So, my only choice is to dual boot it. While I was installing it onto my laptop there was an option to choose the partitioning. There wasn't an option to do this on my her laptop though because you can only have 4 partitions on a hard drive apparently. The partitions are:
NAME (TYPE)
System (NTFS)
C: (NTFS)
Recovery (NTFS)
HP TOOLS (FAT32)
Is there anyway to backup a partition (Like Recovery) and make it bootable from a flash drive/CD? Or is there any other work around from this?
View 2 Replies
View Related
Aug 9, 2011
I've been using ubuntu exclusively on my two laptops lately, for coding and all of my other work. I plan on installing it onto my desktop now for work as well, but I would like to retain Windows 7 so I don't have to worry about compatibility for all of the games I love to play. My question is this:When setting up my partitions, how much space (and what format) should I set aside for windows to write and read games from? I have a 500GB hard drive currently, and was planning the partitions as:
1. Windows 7 (NTFS, setup with Windows installer) ~20 GB
2. File Storage (NTFS, set up with the Ubuntu install partitioner) ~452 GB
3. Ubuntu (EXT3, set up with Ubuntu install partitioner) ~ 20 GB
4. Swap (~2x the size of my RAM) ~ 8GB
The plan is to have Windows install and execute games from the NTFS File Storage partition, while being able to access the same partition from Ubuntu for my documents, code files, music, etc.I don't know if this would work, and I'm also not sure what my file system will be like (windows or linux-y?) if it did. Will this work? Or is there a more elegant solution?
View 7 Replies
View Related
Jun 7, 2010
I am trying to install Ubuntu 10.04 LTS on a Windows XP Media Centre Edition system.On the Step 4 of the installation which usually gives you the option to partition the disk but it only gives me the option to Erase the entire disk or specify partition manually, although this also doesn't allow anything other than totally erasing the disk. I'd ideally like to keep my Windows and I have installed Ubuntu before (but 9.10) on a different system.
View 9 Replies
View Related
Dec 20, 2010
I have Fedora 13 and XP installed on my laptop. Right now it only boots to XP but I have a Fedora Live CD so is there some way I can use the live cd to boot into Fedora and edit or install grub to show up at boot?
View 1 Replies
View Related
Mar 22, 2010
System Layout:
Alienware M17 Laptop
2.26 GHz Quad-Core CPU
4.0 GB DDR3 RAM
Hard Drive #1: Toshiba 500 GB 7200 RPM
Hard Drive #2: Toshiba 100 GB 7200 RPM
What I was thinking of doing was putting Windows 7 Ultimate (64-bit) and Ubuntu 9.10 (64-bit) on the 100 GB hard drive - with just under a 75/25 split towards W7 (approximately 70 GB for W7 and 22 GB for Ubuntu). Would this be optimal, having the operating systems on one drive separate from nearly everything else?
Another question that I was unsure about with this setup was the swap area. It doesn't need to be on the same HDD as the running OS to be utilized, does it?
Also, any partition size adjustment recommendations.
View 3 Replies
View Related
Jan 17, 2010
I downloaded Ubuntu about 5 months ago and love it.Problem is, I didn't know if I wanted to make it permanent on my computer, so I used the option which allowed me to download it as an application on my Windows Vista Control Panel.How can I increase the partition (I think I only have 9 GB left on my home folder) without loosing all of the preferences, applications, and hardware solutions that I have put on there?
View 1 Replies
View Related
Feb 26, 2010
I recently made the move from windows to Linux and I am happy to having got rid off all the MS stuff. Trying out a few distros I decided on using Ubuntu and Mandriva (wife likes the flashier stuff, what can I say ).
My question is how can I partition my hard disk in such a way that my /home is separate from both the Ubuntu and Mandriva part but accessed by both as my default home folder.
View 1 Replies
View Related
May 11, 2010
I would like to dual boot Ubuntu and Windows 7. I have Ubuntu 9.10 Live CD and Windows 7 Pro Live CD. Ubuntu is installed but Windows 7 isn`t. I have gparted installed. I found the following directions within Ubuntu documentation.
Master Boot Record backup and re-replacement
Back-up the existing MBR, install Windows, replace your backup overwriting the Windows boot code:
Create an NTFS partition for windows (using fdisk, GPartEd or whatever tool you are familiar with)
Backup the MBR e.g. dd if=/dev/sda of=/mbr.bin bs=446 count=1
Install windows
Boot into a LiveCD
Mount your root partition in the LiveCD
Restore the MBR e.g. dd if=/media/sda/mbr.bin of=/dev/sda bs=446 count=1
Restart and Ubuntu will boot
Setup grub to boot windows
I don't want to backup the MBR and restore as listed. I would rather use the Ubuntu Live CD to reinstall the GRUB.
How do I overwrite the MBR?
Do I use gparted and change the partition?
Do I create an NTFS partition as listed above?
Or what do I need to otherwise do to boot the Windows 7 Live CD so that it will install?
View 6 Replies
View Related
May 29, 2010
I plan on installing Ubuntu 10.04 and it will be my first Ubuntu install. I plan on dual booting with windows 7 and I would like advice on partition sizes. I have a 250 GiB drive and my planned partitions are as follows.
Sda1 (PQSERVICE) 12GiB This was pre-installed should I delete it
Sda 2 (System Reserved) 100MiB This was also pre-installed should I delete it
I know one of the above is the windows recovery partition but I don't know which one
Sda 3 (Gateway) 25 GiB This will contain windows will 25 GiB be enough
Extended partition
Logical 1 10 GiB / the main Ubuntu partition 10 GiB should be enough
Logical 2 1 GiB /home this will just hold settings so 1 GiB will be enough right?
Both above partitions are ext3
Logical 3 3 GiB swap partition I have 1 gig ram upgradeable to two
Logical 4 180 Gib shared NTFS partition
I am new to Ubuntu and would like to know if you think this is proper. I have already defragmented the hard drive and will make the partitions in Gparted on Ubuntu live test from usb drive.
View 4 Replies
View Related
Aug 28, 2010
on a dual boot can one change the size of each partitioned section of the boot once both sides are installed ?i have a 500GB disc and i have lucid on 307 Gb and maverick on 145GB i did this so i could test mavericknow i would like to change the split to say half and halfcan i do this?i have mountmanager installed but i am not sure how to proceed
View 8 Replies
View Related
Aug 31, 2010
Does anyone have any experience installing Mandriva to a dedicated partition, and configuring it for use with Grub2?
View 9 Replies
View Related
Sep 18, 2010
Last week I installed Ubuntu 10.04.1 on his Windows Vista machine, it has a 200GB hard-drive and he wanted 100GB for Vista & 100GB for Ubuntu on there. So instead of selecting the default partition I split it to 100GB each.
Now, however, I can't boot back into Windows and when it loads I am taken to the 'Recovery Tools' options. Have I 'cked up his partition? I can still view all the files/folders on his Windows partition from within Ubuntu however, so maybe there is a chance I can shrink down the Ubuntu partition again and restore his Windows partition?
[Code]...
View 7 Replies
View Related
Jan 1, 2011
i have an acer aspire one with a 250 gb hdd the hdd is currently partitioned into two parts part 1 - 85 or so gb, has windows installed part 2 - the rest which is currently unallocated. i am trying to install ubuntu so that each has its own section and will dual boot once in the ubuntu installation window, how do i set up the partition to achieve this? i am trying to install ubuntu 10.10 netbook
View 4 Replies
View Related
Jan 21, 2011
Here's what I want to do. I have two separate HDD
HDD 1 : 160 GB (dedicated to windows, already working)
HDD 2 : 500 GB Will be using dedicated to ubuntu (not partitioned yet)
I want to use the HDD two only for linux and this HDD is not partitioned yet. What I want to do is
- A dedicated Grub partition (/boot) on HDD 2 (Do I really need it when I am using just two os? Will it work on second HDD?)
- / root partition
- /home partition
- /swap partition
- /fat32 partition (do I need it to share files with win?)
View 7 Replies
View Related
