Ubuntu Installation :: Windows 7 And 10.10 Dual-boot - Cannot Create A New Partition?
Mar 14, 2011
I've shrunk my Windows partition to ~200GB and made ~100GB of free space for Ubuntu BUT .. it doesn't allow me to create a new partition there as I already have 4 primary ones.Since all of the given partitions ( including Recovery and Tools ) can not be touched ( removed ), I have no idea on how to solve this ..
Code:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
[code]....
View 1 Replies
ADVERTISEMENT
Mar 20, 2011
(This is for a 100% Clean install)
Q1) I was wondering if it is possible to Dual boot Ubuntu with Windows XP on a 1TB RAID-0 setup ?
Q2) Also, is it possible to create a SWAP partition (for Ubuntu) on a NON RAID-0 HDD ?
Q3) Lastly... I read GRUB2 is the default boot manager... should I use that, or GRUB / Lio ?
I have a total of 3 HDDs on this system:
-- 2x 500GB WDD HDDs (non-advanced format) ... RAID-0 setup
-- 1x 320GB WDD HDD (non RAID setup)
(The non RAID HDD is intended to be a SWAP drive for both XP and Ubuntu = 2 partitions)
I plan on making multiple partitions... and reserve partition space for Ubuntu (of course).
I have the latest version of the LiveCD created already.
Q4) Do I need the Alternate CD for this setup?
I plan on installing XP before Ubuntu.
This is my 1st time dual booting XP with Ubuntu.
I'm using these as my resources:
- [url]
- [url]
Q5) Anything else I should be aware of (possible issues during install)?
Q6) Lastly... is there anything like the AHCI (advanced host controller interface) like in Windows for Ubuntu?
(Since I need a special floppy during Windows Install...) I want to be able to use the Advanced Queuing capabilities of my SATA drives in Ubuntu.
View 4 Replies
View Related
Jan 23, 2011
I had Ubuntu 10.04 on this machine and wanted to convert it to a dual boot. It's a 500GB hard drive. The HDD had 3 partitions: one really big one, and two swap areas of about 6 GB each. I ran GParter and carved the big partition into a 100GB partition and a 400GB partition (less the swap areas). Then I installed Windows XP into the 100GB partition, then installed Ubuntu 10.04, selecting the "create dual boot" option.
It dual boots beautifully, and everything runs just fine. But I find that Ubuntu has split the 400 GB partition into two 200 GB partitions, and one of them is simply off-limits. I can see it, but I can't write to it. The attached png shows the Disk Utility, with the mystery partition selected. Its only contents is a folder called lost+found; I cannot open it.
View 9 Replies
View Related
Jan 5, 2011
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies
View Related
Sep 18, 2010
Last week I installed Ubuntu 10.04.1 on his Windows Vista machine, it has a 200GB hard-drive and he wanted 100GB for Vista & 100GB for Ubuntu on there. So instead of selecting the default partition I split it to 100GB each.
Now, however, I can't boot back into Windows and when it loads I am taken to the 'Recovery Tools' options. Have I 'cked up his partition? I can still view all the files/folders on his Windows partition from within Ubuntu however, so maybe there is a chance I can shrink down the Ubuntu partition again and restore his Windows partition?
[Code]...
View 7 Replies
View Related
Jun 2, 2011
i know there are lots of posts to talk about this but i'm still not sure about what to do . I have a new 250GB hard disk and want to use it to dual boot windows xp and ubuntu. i know i will have install xp first, but what would be they best way to partition the drive ? i want to be able to have some space in xp to to download and use 3d simulation programs and for gaming. and i also want to be able to see all my data from both OS.I guess i'll have to choose the manually partition the drive option on the ubuntu installation, but then what should i do exactly? and what would the partition types be? NTFS, FAT32, etc.I have a 2GB RAM, i think it matters for the swap partition size.
View 8 Replies
View Related
Jan 20, 2010
when i installed it the windows 7 Partition no longer works. I can see the windows 7 partition but when i click on it, it just reloads the grub boot loader. Im in college and need the windows 7 partition.
View 5 Replies
View Related
Feb 1, 2010
My old-ish Dell laptop is currently running Windows 2000 and Ubuntu 9.10. I originally installed 2000 to try and squeeze a bit more performance out of the laptop for general use, but in practise Ubuntu is running great and sees far more use than the Win2K installation so I've decided to create a stripped-down (i.e. non-networked) XP installation purely to run a few favourite audio applications.
I plan to do a fresh Windows install and wipe the current C: partition. Is there anything I should be aware of in terms of the GRUB bootloader. Will it simply recognise the new XP installation? Obviously I will back up my data before I continue, but are there any other precautions to take with respect to dual-booting? I could do without having to reinstall Ubuntu too!
View 4 Replies
View Related
Mar 31, 2011
I bought a PC with Window Vista on it as my partner needs it. Using gparted I set up Primary partitions for Vista OS (sda1) and Ubuntu OS (sda2), plus an extended partition for Vista files, Ubuntu /home and swap:
fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 * 1 3969 31880961 7 HPFS/NTFS
/dev/sda2 3970 5294 10643062+ 83 Linux
[code]...
My problem is Vista (as always). The 30GB I allocated is not enough, even just for the OS and it won't now boot from GRUB, though I can see it from GRUB. I don't want to do anything that risks a problem for Ubuntu. Will grub still see both OS if I wipe sda1 (Vista OS) and reinstall Vista OS on the extended partition sda6? Ideally I would like to merge sda1 with sda6 and install Vista on that, but that looks way too risky / impossible.
Edit - There is another drive on the PC which is much larger and I use for backup. Is there any scope for installing Vista on that one so that GRUB still identifies both. Not ideal as I like having one as the backup for the other.
View 4 Replies
View Related
Jan 9, 2011
I successfully partitioned my desktop with Gparted and made it into an XP/Ubuntu dual boot.
Now i'm trying to do the same with my netbook (eee pc 1000he), and the existing partitions look funny:
How should I change this to prepare for installing Ubuntu? Can I just install to the unallocated space on the extended partition? I don't need optimal efficiency here, I just need to know where to install Ubuntu for a workable dual boot.
It's confusing to me that Windows is on an extended partition, and also that /dev/sda2 has the boot flag (this drive contains nothing but two undeletable folders titled "amd 64" and "i386"). This set-up is the result of a Windows re-install at a sketchy computer shop.
View 9 Replies
View Related
Feb 7, 2011
To install Ubuntu alongside Windows 7, I have to shrink Windows 7 partition C:. But due to some unmovable files, I cannot shrink as much as I plan by using Windows own shrinking tool. I guess many of you who have both OSes on the same hard drive must have similar experience.
View 8 Replies
View Related
Sep 1, 2011
I am about to get a new laptop here soon and I was planning a dual boot like I have on my current laptop (Win7 and Ubuntu), but I have something special in mind. I looked around the forum to see if there was anything like what I had or if it was even possible but I didn't see anything quite like this.I was wondering if this was even possible, and if so, would anyone be able to tell me what filesystem I should use for my windows swap partition?
View 6 Replies
View Related
Mar 1, 2010
i want to dual boot, and create ubuntu on a second partition, and while im at it remove the windows partition that i dont use on here at all
also, i want to run chkdsk first, does anyone know how i can do that on linux?
View 6 Replies
View Related
Jan 3, 2010
I am new to linux. I tried and failed. I need some help on Creating patitions (I think it is root, swap and home).I have HP laptop with WIndows 7 installed. I have shrink the volume to allow Linux installation. I have three partitions, first one is windows boot - about 100MB. Second one is about 110GB and it has windows 7. Third one is UNALLOCATED space of 110GB that I intended for Suse.
Now I am going to install the Suse. The unallocated spaces should be "primary" or "extended"? Also, should I divided this new partition in to three partition? If does, what are sizes for each? I want to learn Linux so I will able to look for better job. This is the first time I ever look into linux and confused.
View 9 Replies
View Related
Mar 9, 2010
is it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
View 4 Replies
View Related
Jul 15, 2010
I want too create a dual boot Windows 7 Ultimate (64 bit) and Ubuntu (64bit). how to do this but I want something special. The boot loader appear. Will be only one password field, no OS names. If I introduce a password will boot in Linux, if I introduce another password will boot in Ubuntu. Also in Ubuntu, you can see windows partitions only if you introduce a password (root or power user).
View 3 Replies
View Related
Sep 19, 2010
3 partitions (in order): Windows 7, CentOS and shared data partition.
I need to increase the size of the Windows 7 partition (c:windowswinsxs seems to be something not easily remedied).
GParted didn't work in moving things around (bad sector) so I wiped out its partition (# 2 out of 3) and I was able to increase the size of the Windows 7 partition (I can reinstall CentOS easily and not much work lost).
Except ... no more grub menu (unsurprising). This incantation does allow me to boot into Windows 7.
Is there any way of rebuilding the grub menu short of reinstalling CentOS (5.5)?
View 2 Replies
View Related
Oct 25, 2010
This is my partition table:
/dev/sda1 1 4255 34178256 83 Linux
/dev/sda2 4256 4437 1461915 5 Extended
/dev/sda3 * 4438 9964 44395627+ 7 HPFS/NTFS
[code]....
View 4 Replies
View Related
Dec 3, 2009
I Need instructions on how to create a dual boot with Windows 7 already installed ...
View 2 Replies
View Related
Nov 11, 2010
I'm doing some research for a friend who wants to dual boot Windows 7 with a Linux Distro that has Perl inbuilt & also supports .MP3 and other popular codecs "out of the box"
From my limited research, OpenSUSE seems to fit the bill (as does Mandriva Powerpack).
Also, how easy is it to create a dual-boot with Windows 7 with this distro?
View 5 Replies
View Related
Aug 2, 2011
So Ubuntu needs to go so I booted onto a live CD of Ubuntu and used Gparted to delete every one of my linux partitions. I created a ntfs partition, will windows boot on this. When i tried it before it said didn't recognize file system so I deleted the linux file system and created a ntfs one. Is that all?
View 2 Replies
View Related
Nov 23, 2010
I'm trying to create a Linux instance on a Windows 7 PC and use dual-boot. I have created 64GB of space for Linux. Is this enough? When I boot from the live DVD and go through the setup, I get stuck setting up the unassigned space as a linux partition. I don't understand what the setup is trying to tell me and I'm afraid I'll wipe out Windows 7. The message I get says there isn't enough space even though the unassigned available area is 64GB. I am very timid about following what Yast2 is telling me because to my untrained eye it appears the setup wants to use my entire hard drive. Where can I find more information about the disk setup section of the installation process?
View 9 Replies
View Related
Jul 3, 2010
I'm running a dual boot of Ubuntu 9.10 and Windows 7. For months now everything has been just wonderful. Recently, however, I tried to add another partition (in windows) and saw that my Ubuntu partition is recognized as RAW. I formatted it as NTFS originally. In Ubuntu, it is recognized correctly (ext4). I don't know what's going on. I'd like to be able to install drivers to recognize this partition in Windows. Will I have to reformat? I'm not sure if it's at all connected, but probably worth mentioning: while booting into Ubuntu, I received an error about "usplash mode failed." It also said something about "mount of filesystem failed." (I really, really wished I had written down the error message.) Everything seems to work now.
View 6 Replies
View Related
Mar 29, 2011
I had dual boot on my Asus laptop, Windows and Hardy. Then my Windows XP crashed and the person who repaired installed Windows 7 but didn't preserve the dual boot prompt on startup. I've explored BIOS but there seems no way of accessing my Ubuntu partition that way.
View 9 Replies
View Related
Jul 26, 2010
When I installed Ubuntu I set it up to dual-boot with windows and didnt put much thought into the partition sizes, and now I want to make the ubuntu partition bigger. I shrunk the windows partition from gparted fine and then booted up off my ubuntu 10.04 disk to make the ubuntu partition bigger, but it won't let me do so from gparted. Attached is a picture of how my hard drive's currently set up.
View 8 Replies
View Related
Aug 8, 2010
Regarding the installation of ubuntu 10.0.4 on my HP pavilion DV5000 laptop.
I previously installed windows 7 in my laptop and i would like to have ubuntu and windows 7 in dual boot. in order to do that i need to free up some space to be able to install to create partitions for ubuntu and the swap even if I have 30GB of unused space.
When i launch the live cD and i reach the step 4 ubuntu is actually recognising three operating systems installed:
- windows 7 (loader) under dev/sda1 (92,86GB) NTFS
- windows NT/2000/XP (which is corresponding to my "HP recovery" partition) under dev/sda2 en FAT32 (6,2GB)
- windows XP embedded (I don't unerstand what it is) under dev/sda3 NTFS (1,1GB)
when I go to the step 6 to modify the size of sda1 to free up some space, i don't have the possibility to change it, i can read "unknown" under the used space collumn.
I also tried to resize this partition using gparted but unfortunately i had the same problem, when i select it all the options to modify it are greyed out and i can notice a key near the hard drive logo (is it locked ?).
View 2 Replies
View Related
Aug 26, 2009
i have windows xp with ntfs partitions on my laptop i want to install centos on it will i be able to dual boot centos with windows xp on the ntfs partition
View 2 Replies
View Related
Jul 15, 2010
I have booted from the .iso cd I made on my Mac last night and was tempted to install it on a 6gb partition that I have on my main HDD but was a bit scared to go past the fourth (or so) step in manual installing where I pick that partition and *do what?* Is it going to install the OS on that partition and leave everything else alone to give me a dual booting PowerMac? It doesn't quite say. I am fearful of screwing up my little ol' machine. Can anyone direct me to something that gives a step by step in manual installation on an already created (HFC+) partition to create a dual booting PowerMac?
View 3 Replies
View Related
Jul 11, 2011
I know it is possible to move the ubuntu home directory but what is the best way to move it safely to an NTFS partition that already has valuable data in?
View 8 Replies
View Related
Aug 11, 2011
I have Vista Home edtion and Linux, I have formatted Linux partions and now that Grub is not letting me boot into Windows..I had C:wIndows D:New Volume and rest of the space was E:
View 5 Replies
View Related
