Ubuntu Installation :: No OS Choice In GRUB Menu After Updating 10.04
May 19, 2010
I installed Lucid Lynx in my p4:2.66 hz machine with XP sp3 pre-installed and the system booted just fine with dual boot option. Then I updated my Lucid. All updates were downloaded. But during update installation a power failure caused PC reboot. Again I started update manager and it gave me option for "Partial Upgrade". I did the same and it instructed me to reboot. The the real damn thing happens now when I rebooted, In the GRUB menu it showed only Memorytest options. I see no OS choice there, I tried to reinstall GRUB from live CD with mount options. And it showed no errors during the procedure. I rebooted but the same problem exists.
View 6 Replies
ADVERTISEMENT
Jun 3, 2010
This morning I had 10 updates for my system including a new kernel 2.6.28-19 During install I was asked a question as to which menu.lst to use. I was completely confused as there was no documentation explaining the choices, so I took the default, keep my current menu.list. I did that because I have a modification to my menu.lst having added acpi-noirq I was afraid I would loose that and not be able to boot. Anyhow I ended up with my same menu.lst without the new kernel. So it booted the old kernel 2.6.28-18.Where is some documentation to give one some idea of which of the about 8 choices to make? I can't be the first with this problem. I have another computer to undate that has a different mod to menu list.I would like to know the correct way to choose the proper choice. If I don't get an answer I will try to document in more detail the choices.
I got around the problem by editing menu.list and copying the entries for 2.6.28-18 and changing them to 2.6.28-19 Many folks might not even realise they were running on the old kernel.
View 2 Replies
View Related
Mar 30, 2010
I installed Ubuntu 9.10 (desktop version) and it performs flawlessly. Now I want to add a second hard drive to the same box, install Ubuntu 9.10 *server* on it, and use GRUB to control which one boots.
Problem is, I'm a Windows pro but a Linux n00b. Should I disconnect the first hard drive (the one with Ubuntu desktop) before I do the server installation on the second (new) drive? Also, how do I edit GRUB's menu to offer a choice between the 2 OSes?
View 1 Replies
View Related
Mar 3, 2010
Yesterday I installed on my laptop (an IBM Thinkpad T42) "virt manager" using the Synaptic Package Manager. I'm running Karmic.
As part of the installation, SPM had me reboot the computer (which is dual-booted with Windows XP, which I use less than 1% of the time). The new GRUB screen came up showing two new initial lines, the first 2 of the following 4 lines:Ubuntu,
Linux 2.6.31-19-generic-pae
Ubuntu, Linux 2.6.31-19-generic-pae (recovery mode)
Ubuntu, Linux 2.6.31-19-generic
Ubuntu, Linux 2.6.31-19-generic (recovery mode)
When I allow the default choice of the first line to prevail, Ubuntu boots up into a condition in which the Wireless Network Connection fails to open, and in which nothing I've been able to think of makes it open.
If, instead, I scroll down to the third line (which was the initial default choice line, i.e., the default choice line prior to the "virt manager" installation), Ubuntu boots up into a condition in which the Wireless Network Connection operates as usual, viz., immediately.
Scrolling down works, but it would be better, it seems to me, to return to the condition in which the current line 3 either becomes line 1 or else becomes the default bootup choice.
I've used SPM to uninstall "virt manager", but the 2 new intial lines in the GRUB options remain. I understand that with Karmic's version of GRUB, viz., GRUB-2, it is no longer possible to change the bootup menu choices easily.
how I can either eliminate the first 2 lines in my current GRUB screen, or make line 3 the default choice?
View 9 Replies
View Related
Apr 11, 2011
I recently installed Fedora 14 on an old Dell server (Pentium 4). It works fine, except that it somehow includes an extra startup step, in which I have to choose between two different grub versions. Here is the screen I get:
GNU GRUB version 0.97
Fedora (2.6.35.11-83.fc14. i686)
Fedora (2.6.35.6-45.fc14. i686)
Press enter to boot the selected OS, 'e' to edit the commands before booting, 'a' to modify the kernal arguments before booting, or 'c' for a command-line. I always select "Fedora (2.6.35.11-83.fc14. i686)" because I presume it is the latest version. Is there anything I can do to automate the choice of "Fedora (2.6.35.11-83.fc14. i686)" and avoid this extra step? On another subject, I have already modified the custom.conf file to eliminate the login screen step.
View 12 Replies
View Related
Dec 8, 2010
machine boots straight to Windows, Grub2 does not display the normal boot menu choices. Therefore, not able to boot into Ubuntu 9.10.Perhaps someone could look at this Results.txt file and shed some light on what went wrong.This machine was working fine for a long time, then all of a sudden, it starting booting straight to Windows.
View 9 Replies
View Related
Jan 2, 2010
I just attempted to install ubuntu for the 4th and 5th time and have yet again had a fail. This time it actually completed the installation, which is a first. however upon reboot it takes me directly to Vista - I don't see grub or a o/s selection choice.
View 9 Replies
View Related
Apr 22, 2010
installed windows 7..then tried restoring grub using live cd....mounted partition somewhere else....then installed ubuntu again where it was installed previously and now grub is not detecting windows 7 but i am able use my windows files
used sudo update-grub2.
View 9 Replies
View Related
Jul 10, 2011
Ubuntu is getting glitchy and I need to update it, but there's something holding me back. In the past, whenever I used to update, I would get some sort of GRUB Menu (if that's what it's called) after reboot, and I would have no idea of how to get into Ubuntu. This would eventually lead me to uninstall Ubuntu via Wubi because of frustration and lack of answers on the internet.
But not this time. I want the solution this time so I can be successful in updating. Can anybody PLEASE tell me what happened all of those times, and what I can do to prevent it from happening now?
View 1 Replies
View Related
Feb 15, 2010
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want.
In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
Is there a document explaining all of the radical changes?
View 5 Replies
View Related
Apr 22, 2011
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want. In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
View 1 Replies
View Related
Dec 22, 2010
The first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
View 9 Replies
View Related
Jan 25, 2011
The script starts first a program I wrote earlier that collects specific data from 3 online csv files and write a summary csv file called /Tribalwars/request.csv . The seperator used is ;
the csv file looks like this but can be any number of rows (but not to many mostly 3 - 5)
Title1;tile2;...;title15;
B1;B2;...;B15
C1;C2;...;C15
D1;D2;...;D15
Now the next part of the script, and that is what I want to change, asks me to manually input some data I have to copy paste from the csv file just created. I mean if i choose to continue to do my calculations for city 2, I need to copy-paste C1 for the first variable 'cityname' , copy-paste c2 for the second variable 'xxx',copy-paste C3 for the third variable 'yyy',copy-paste C15 for the fourth variable 'points'
Then it starts new calculations etc, witch only these variables.
Now could it be possible to make a menu from the csv file with only the according cells on the screen and that I only have to choose a row from the menu?
View 5 Replies
View Related
Mar 4, 2011
I am dual booting Windows and Ubuntu 10.10. I installed StartUp-Manager so that I could easily make Windows my default OS upon Startup.I did a sudo apt-get update / sudo apt-get upgrade and now I have a new kernel. This moved Windows down in the list, so now MemTest86 is the default OS upon Startup.I want to make Windows the default always, not just until the next Kernel upgrade comes through.
View 3 Replies
View Related
Jul 28, 2009
I am testing my crash recovery strategy for my linux system and I am having trouble with GRUB. I am basically restoring my backup (i.e. tar) unto a different hard drive, but I am having problems getting the machine to boot without me having to type the GRUB commands at the GRUB prompt that is presented when the machine boots up off the new hard drive. I have tried to restore the MBR in two ways (the 2nd one is the one that gets me to the GRUB prompt):
1. Get the MBR off the original drive and write it unto the new drive (all via dd), but that did not work at all: the machine hangs right away during boot up. It seems to hang right at the point where the BIOS tries to read the MBR.
Code:
On original drive:
# dd if=/dev/sda of=mbr+part.bin bs=512 count=1
On new drive (new drive is now in place of original drive):
# dd if=mbr+part.bin of=/dev/sda bs=1 count=446 conv=notrunc
2. By using the FEDORA rescue CD, I installed grub unto the new hard drive as follows:
Code:
# chroot /mnt/sysimage
# grub-install --root-directory=/boot hd0
reboot and remove FEDORA CD Using the 2nd option above, I get the GRUB> prompt during bootup. I can then boot into the system by issuing the commands that are in the menu.lst file, followed by the "boot" command. However, I would like for those commands to happen automatically, just like in the original configuration. It seems to me that GRUB is actually finding all its stage files because I doubt the GRUB program (the one displaying the prompt) fits entirely in the 446 bytes it has on the MBR. So, it must be loading its stage 2 (and stage 1.5??) files from my /boot partition. However, if GRUB is loading its stage files off the boot partition, why does it not load/read the menu.lst/grub.conf contained in the boot partition also?
Code:
# ls -l /boot
total 22888
-rw-r--r--. 1 root root 1274567 2009-05-27 16:39 System.map-2.6.29.4-167.fc11.i686.PAE
-rw-r--r-- 1 root root 1274538 2009-06-16 22:27 System.map-2.6.29.5-191.fc11.i686.PAE
[code]....
View 3 Replies
View Related
Jul 6, 2010
How do I change the default OS on grub, and adding more time to make my choice?
View 3 Replies
View Related
May 18, 2010
single hdd
/dev/sda1 = 100mb Windows7 boot part
/dev/sda2 = Windows7 part ( encrypted w/ Truecrypt)
/dev/sda5 = /boot Ubuntu 10.04
/dev/sda6 = / Ubuntu 10.04
Truecrypt bootloader is in the MBR
The Truecrypt bootloader will boot other loaders if esc is hit, I can choose to boot /dev/sda5 and grub loads, but no menu is displayed, all I get is a GRUB> cli. I've reinstalled Grub to /dev/sda5 using the chroot method outlined in the Grub2 info page on this site, but it always results in the same outcome of ending up in the Grub cli. I can chroot that install and attempt a update-grub, but all i get is "cannot find list of partitions!" attached is the boot_info_script results.
View 9 Replies
View Related
Dec 11, 2010
Once upon a time I had Maverick Meerkat installed on two drives. Now I've used Disk Utility's "Format Drive" to erase it and remove the Master Boot Record partitioning on one of them. Yet I still have to go through the GRUB menu each time I start up my computer, as if there are multiple bootable drives. I've read that 'sudo grub-install /dev/sdb' might work, but that only seems to reset the bootloader, not remove it.
View 5 Replies
View Related
Jan 25, 2011
I have an external USB drive with Mint9 Fluxbox installed on it. At one point, I wiped the drive and set it up using GPT instead of MFT, then partitioned the drive in GParted and installed the OS.
This setup was working fine, but now I have a new laptop, and the OS won't boot. I just saw the errors, "No such partition: UUID=xxx", "Could not find kernel, hit any key to continue". So I attempted to reinstall GRUB via terminal, but saw errors saying that GPT requires a grub_bios partition. So I made a 1mb partition at the end of the drive, (the only unallocated space without moving anything) and selected the grub_bios flag.
I was then able to reinstall Grub without incident, rebooted, selected the USB drive to boot first in bios, but still no Grub menu!?! It just boots from the next device in the bios list.
I'm currently using Crunchbang on a USB stick, which is where I'm running terminal commands from. I want to be able to boot from my external drive on any computer.
View 4 Replies
View Related
Feb 1, 2011
I just restored my Windows partition from SFS so at least it's read by boot info. It says it's booting the Windows partition but it always boots straight into Ubuntu with no GRUB menu at all. Heres my boot info...
[Code].....
View 3 Replies
View Related
Feb 18, 2010
I have just installed Mythbuntu 9.10 on my Windows 7 PC to experiment with. I want to make Wingows 7 the default for the time being, but can't find a way to change grub's list. I don't seem to have the file /boot/grub/menu.lst and can't find anything else which might suit.
View 1 Replies
View Related
May 4, 2010
I am using kubuntu 9.04 dual booting with winXP. The package kit showed that I have 179 bug fixes. So I updated them.Now the boot time grub menu shows 6(two different versions for kubuntu and kubuntu recovery mode) entries instead of usual 4(winXp + kubuntu + kubuntu recovery mode + memtest). My grub.cfg file is as follows:
Quote:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
[code]....
What is wrong. How can I change the entries. Which one to remove ?
View 2 Replies
View Related
Sep 12, 2010
I have dual-booted Windows XP and Ubuntu. Because Ubuntu 10.04 doesn't have the required proprietary drivers for my system, I chose Ubuntu 8.04. The installation procedure went well, the drivers are there, everything's perfect but... there's a problem with the GRUB menu that appears just after launching my laptop.
When I first installed Ubuntu it showed Ubuntu (and some letters and numbers), another instance for recovery mode, some memory test lines (I guess there are two of them) and Windows XP.
But after I used the software updater in Ubuntu (to make it up-to-date), the grub bootloader shows two more lines - and those are the same as the first two - Ubuntu (with some letters and symbols) and Ubuntu recovery mode.
Why are those duplicates there? I've never installed another Ubuntu OS on my PC. Because at the moment I have two Ubuntu and two Ubuntu recovery mode lines .
View 4 Replies
View Related
Dec 30, 2010
I've done a clean install of XP Pro on my HP XW8200 (Boot drive is 2x73GB SCSI drives set up as RAID 1)I've run the Ubuntu 10.10 desktop installer and partitioned the drive, installed ubuntu and rebooted when requested.No OS selection screen appears after POST though. Just goes straight into WinXP. The startup options in XP only show XP.Rebooted from the Ub10.10 live cd and checked that the partition is there and the OS files are there.
Any ideas why the grub menu doesnt appear?I'm assuming it's something to do with Ubuntu not seeing the RAID drive but it did install ok..
View 9 Replies
View Related
Jul 5, 2011
I've installed 11.04 on my laptop (dual boot with Win7). It goes through the grub boot menu and boots in ubuntu but displays ~inch wide band near the top, nothing else. I assume it is a display issue (it has an ATI mobile Radeon HD 3870 X2 card) but can't seem to resolve problem. I can boot into Windows via the menu. In the grub menu I can boot into the command line (grub>) but can't seem to make progress beyond that. Within this grub interface, it won't take terminal commands.
View 2 Replies
View Related
Jul 28, 2011
I installed Ubuntu 11.04 (x64) today. I use an LG LCD monitor. After installation, I am unable to see the grub menu. I get a 'D-sub out of range 92.5 kHz / 58 Hz' message on screen instead of grub menu. I know the grub menu is there because, by pressing the 'down' button 5 times and then the 'enter' button I am able to select the windows loader. If I select nothing I am able to log into ubuntu without any display problem.
View 5 Replies
View Related
Nov 20, 2010
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies
View Related
Mar 18, 2011
I installed F14 from my usb according to the wiki page using unetbootin. The usb boots perfectly and i get a working F14 system. I partitioned my HD with gparted and got a /,/home and swap partition, then used the installer to install the system using them. The installer finishes without a problem and ask me to reboot. When I reboot , there is a blank black screen. No grub menu , no fedora loading. I reboot with the usb and the partitions are full with the files from F14 , there is no xorg.log in the /var/log/ so f14 doesn't even start so the problem seems to be with grub.
I check the grub.conf in /boot/ , i set the timeout to 5 secs , i check that the kernel is using nomodeset (according to this wiki page there is a problem with ati), xorg.conf is using vesa as a driver and I reinstall grub with grub-install with no problems.My notebook is a acer aspire 5552 , i don't think is a hardware problem because I've used arch and opensuse with no problems in it. Fedora seems a nice distro , but this error is preventing me from using it.
View 1 Replies
View Related
Jan 7, 2010
After I updated my system, grub shows about 2 extra options on the boot menu. They seem to be different kernel versions. How do I clean up the menu and uninstall the older kernel versions?
View 6 Replies
View Related
Jan 24, 2010
Just upgraded to 9.10 on a laptop with dead Vista which I lost when I moved over to UBUNTU some time ago. Never any problems but when fiddling at boot up tonight I accidentally selected to boot up the Vista loader which went into the Vista recovery, and since then the laptop only opens up the Vista Recovery, ie it does not go to the Grub. Any ideas on how I can get to boot UBUNTU again?
View 9 Replies
View Related