Ubuntu Installation :: Failed Attempt To Create A Dual Boot
Apr 9, 2010
My buddy has a computer with a problem and hes asked me to see if I can retrieve the data documents from the computer. The subject computer is a COMPAQ PRESARIO SR5030NX with a Pentium 4 cpu, 3.2 GHz, 1 GB RAM, running Windows Vista Home Basic.
His goal was to create a dual boot computer UBUNTU and Vista. What he did was to install UBUNTU, partitioning the computer in two partitions. The computer is now giving an error code of 21 when GRUB Loader starts up. Is there a restore disk or some kind of utility that can undo what was done to the computer. He has no backup disk.
I tried Recovery Commander Ver. 3 made by Avanquest but as their website indicates it�s for XP. They never updated it for Vista and Windows 7. Is there a utility that can undo some of the changes that were made to the machine when UBUNTU was installed, albeit, unsuccessfully.
(1) I have an HP PC running XP professional and I was wondering if I take the hard drive out from the COMPAQ and rig it to my HP via a SATA/IDE to USB 2.0 Adapter device would I be able to see the contents of that COMPAQ computer that had Vista and now UBUNTU.
(2)What about attaching the COMPAQ internal hard drive and attaching it to my HP as a slave drive.
(3)Can the UBUNTU disk going to help?
Were just after the data files and not software programs.
View 2 Replies
ADVERTISEMENT
Jul 28, 2011
I was attempting dual boot my computer (ubuntu 11.04 and windows 7) and when I got to the stage to allocate drive space I accidentally formatted the largest partition of my hard drive to a linux swap. My computer froze while it was formatting the drive and I was forced to power off my laptop. Windows was my original operating system and was installed on the partition that is now formatted (or maybe not because of the crash during the formatting) as a linux swap. Therefore my windows no longer works and I cannot restore my computer for a backup because it wont let me restore it to the partition that is now a linux swap. Now when I boot from the linux install cd I get an error and am not able to install ubuntu or format/allocate drive space. Is there a way I can reformat and fix my harddrive so I can them restore windows.
View 9 Replies
View Related
Jul 8, 2010
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
View 1 Replies
View Related
May 15, 2010
I had a failed attempt at an upgrade to 10.04 but I know the error of my ways however before I go through it again does 10.04 still have the tools available for a dial-up connection, wvdial & gnome ppp?
View 4 Replies
View Related
Feb 22, 2011
I would like to install Ubuntu in a separate partition. I currently have Windows XP on the C drive.
I have the following config on my Presario Laptop:
60gb SATA hard drive
41.6gb available
3% fragmented
I would like to partition the hard drive to install Ubuntu as a dual boot. how I need to do this or point me in the right direction? I did begin an install from a cd I burned from ISO. I started by just going for the auto installation and what it recommended. However, when I tried to install, I got an error message that changes were uable to be written to disk and had to abort??
Assuming I can get past the error I would like to know how to create the partitions for root, home and swap and how much space for each.
View 2 Replies
View Related
May 27, 2011
I had Ubuntu 10.10. Now in the free space remaining in my hard disk, I installed Fedora 15. But unfortunately, Fedora failed to detect ubuntu. Now when I start my computer, grub automatically loads fedora and also doesnt display the boot menu. How can I boot ubuntu and let the grub display a menu of operating system choices?
My /etc/grub.conf file in fedora is as follows:
Code:
View 2 Replies
View Related
Jan 23, 2011
I had Ubuntu 10.04 on this machine and wanted to convert it to a dual boot. It's a 500GB hard drive. The HDD had 3 partitions: one really big one, and two swap areas of about 6 GB each. I ran GParter and carved the big partition into a 100GB partition and a 400GB partition (less the swap areas). Then I installed Windows XP into the 100GB partition, then installed Ubuntu 10.04, selecting the "create dual boot" option.
It dual boots beautifully, and everything runs just fine. But I find that Ubuntu has split the 400 GB partition into two 200 GB partitions, and one of them is simply off-limits. I can see it, but I can't write to it. The attached png shows the Disk Utility, with the mystery partition selected. Its only contents is a folder called lost+found; I cannot open it.
View 9 Replies
View Related
Mar 14, 2011
I've shrunk my Windows partition to ~200GB and made ~100GB of free space for Ubuntu BUT .. it doesn't allow me to create a new partition there as I already have 4 primary ones.Since all of the given partitions ( including Recovery and Tools ) can not be touched ( removed ), I have no idea on how to solve this ..
Code:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
[code]....
View 1 Replies
View Related
Dec 4, 2010
I just tried to install Ubuntu 10.04 on my windows machine. Unfortunately there was an installation error and now the computer will not boot up in windows anymore (I get grub error 17). I had Ubuntu 7.04 before, but when installing 10.04, I deleted the 7.04 partitions. Is there a way to recover the ability to boot into windows?
View 1 Replies
View Related
Jan 7, 2010
I wanted to start exploring web development and perhaps hosting my own server as well as learning about linux and all the things that go with it so I downloaded the ubuntu 9.1 Server edition and burned it to a CD. I thought to put it on my Dell laptop as it is newer than my main PC and I could bring it to and fro between class. It had Vista installed and I definitely wanted to keep that in the meantime until I got more familiar with Ubuntu. The laptop has a 320GB hard drive with a 10 GB recovery partition. I went ahead and formatted the 10GB to make room for ubuntu. Also I was able to "shrink" the main windows partition by 16GB to make even more room. I could not combine the two small drives but alas. I had hoped to use the 16GB partition for the main install and the 10GB for a necessary swap drive (I am completely new to all this).
So I reboot on the server CD and get to the partition section. I was following this guide here: [url]
It seemed I did not want to do anything "guided" or "automatic" because the options were listing the entire drive and again i wanted to keep my vista untouched. So I go to manual partitioning and although the guide didn't go into enough detail I went ahead and assigned an "ext2" filetype to the larger partition and a "swap" to the smaller partition. Then I went to write changes to disk and after completing one of the two successfully the installer failed to configure the swap drive. I don't know why. I restarted to make sure windows was OK and surely it was not, as I got the dreaded "missing operating system" screen. I ran the windows recovery CD and lo and behold it could not find any drives at all, much less repair them. The data I had on the vista partition were not particularly vital, but it would be nice to have it back.
So my questions are, is there a way to recovery the windows partition? And how is the correct way to configure a dual boot system with Vista and Ubuntu 9.1 Server edition?
View 5 Replies
View Related
Oct 10, 2010
I grabbed the new lubuntu 10.10 from [URL] but it turns out I'm having a problem installing it on my netbook (Asus Eee PC 1015PED). While installing, this error pops up:
Quote:
The attempt to mount a file system with type ext4 in SCSI2 (0,0,0), partition #1 (sda) at / failed.You may resume partitioning from the partitioning menu.I'm installing via USB and have selected the option to erase everything and use the full HDD.
Edit: I had Xubuntu installed before.
View 2 Replies
View Related
Dec 20, 2010
I have Fedora 13 and XP installed on my laptop. Right now it only boots to XP but I have a Fedora Live CD so is there some way I can use the live cd to boot into Fedora and edit or install grub to show up at boot?
View 1 Replies
View Related
Oct 2, 2009
when i try to install fedora 11 on my laptop my Fedora 11 Preview installer crashes after attempt to create a partition. How do i overcome this problem
View 6 Replies
View Related
Mar 20, 2011
(This is for a 100% Clean install)
Q1) I was wondering if it is possible to Dual boot Ubuntu with Windows XP on a 1TB RAID-0 setup ?
Q2) Also, is it possible to create a SWAP partition (for Ubuntu) on a NON RAID-0 HDD ?
Q3) Lastly... I read GRUB2 is the default boot manager... should I use that, or GRUB / Lio ?
I have a total of 3 HDDs on this system:
-- 2x 500GB WDD HDDs (non-advanced format) ... RAID-0 setup
-- 1x 320GB WDD HDD (non RAID setup)
(The non RAID HDD is intended to be a SWAP drive for both XP and Ubuntu = 2 partitions)
I plan on making multiple partitions... and reserve partition space for Ubuntu (of course).
I have the latest version of the LiveCD created already.
Q4) Do I need the Alternate CD for this setup?
I plan on installing XP before Ubuntu.
This is my 1st time dual booting XP with Ubuntu.
I'm using these as my resources:
- [url]
- [url]
Q5) Anything else I should be aware of (possible issues during install)?
Q6) Lastly... is there anything like the AHCI (advanced host controller interface) like in Windows for Ubuntu?
(Since I need a special floppy during Windows Install...) I want to be able to use the Advanced Queuing capabilities of my SATA drives in Ubuntu.
View 4 Replies
View Related
Oct 15, 2010
Unable to install Ubuntu 9.10 on a new internal harddrive. The hardrive contains no operating system. This hardrive is the only drive present in the system.
Whenever the installation trys to mount the ext4 partition the following error appears: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition #1 (sda) at /failed
Iv'e tried over and over to get past this error to no avail.
View 6 Replies
View Related
Jan 17, 2010
Can't boot at all. At first, was able to boot using LiveCD USB but now whether I plug it or not, computer freezes at blank screen with blinking cursor at the top left of the screen.
View 1 Replies
View Related
Aug 2, 2011
Hi,I had a Windows 7 installation and I decided to install ubuntu 11.04 I tried several times but every time soon or later something with grub goes wrong.Most times I get the error "no such partition",once it just halted after "verifying DMI ... " .I fixed windows mbr with "bootsect /nt60 C:" and then tried to reinstall grub with boot-repair .It showed no errors but after reboot I get "no such partition" again.
My scheme is something like :
/dev/sda1 -> the windows 7 system partition NTFS
/dev/sda2 -> partition for windows programs etc NTFS
/dev/sda3 -> partition for files(images/music/videos) NTFS
/dev/sda4 -> extended partition
[Code]...
View 3 Replies
View Related
Jul 5, 2011
The problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
View 1 Replies
View Related
Jun 18, 2011
I followed blindly this how to : [URl].. out of laziness and then for some reason bind9 didn't want to start. So I tried to apt-get remove it, but when I re-install it, it failed because
Code:
chgrp: cannot access `/etc/bind/named.conf*': No such file or directory
so I assume the chrooting stuff I did is in the way, but I know very little about chrooting and permissions ... how can I undo the following things I did :
Code:
/etc/init.d/bind9 stop
[Code]...
View 4 Replies
View Related
Jan 5, 2010
I made an attempt to backup my system (karmic koala) using this routine. cd / then sudo tar cvpzf backup.tgz --exclude=/proc --exclude=/lost+found --exclude=/backup.tgz --exclude=/mnt --exclude=/sys /
The process of backup went on for a very long time, which is probably normal. On returning to the computer in the morning, it was in suspend mode and would not power on via the usual method,tapping power button. So then I used the reset button, and after booting up a message appears on the top right that reports "Install problem! The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."
Is there something wrong with the statement that was used for backing up the system? Also when I attempt to login it does not work now either, it eventually returns to the login user selection. So is there a possibility the backup finished and then there may be a chance the system can be restored from the backup file? I have tried booting up with a live cd and could use some advice on how to navigate with terminal to root of the system and see if the backup file exist even, have been unable to get to the root folder(where the backup would be) with the GUI method via live cd.
View 1 Replies
View Related
May 1, 2010
I've searched lot on forums but couldn't find a related post. My problem is I want to hide my mail folders when login attempt in Evolution has failed. I dont use Remember password option so everytime I'm prompted for password.
When I give no password and escape that dialog, I can see all the mails that have been already downloaded form my gmail account. If any of you guys know already existing post, please redirect me to that one.
View 2 Replies
View Related
Feb 8, 2010
I am looking to do just as the title says. If I no longer want to keep ubuntu say a year from now. Will i be able to uninstall or possibly delete the partion with ubuntu on it without wiping out windows? I ask because I am not sure of how much space I would like to partition, this way I could always come back delete it and then reinstall it to the size I wish
View 3 Replies
View Related
Jul 15, 2010
I want too create a dual boot Windows 7 Ultimate (64 bit) and Ubuntu (64bit). how to do this but I want something special. The boot loader appear. Will be only one password field, no OS names. If I introduce a password will boot in Linux, if I introduce another password will boot in Ubuntu. Also in Ubuntu, you can see windows partitions only if you introduce a password (root or power user).
View 3 Replies
View Related
Apr 6, 2010
I installed from a live CD when it came to selecting the partition I re-sized the partition that Ubuntu was on because it was 68 gigs I shaved off 15 gigs for SUSE. Then I selected this new 15gig partition to install SUSE on, everything went fine with the installation I was tinkering around on SUSE but of course I needed internet access, so I go to get on Ubuntu where I had my file with my network key. I restarted expecting to see the usual GRUB boot-loader screen only now with an added option for SUSE. Instead I see an entirely new layout for the GRUB boot loader and all that is listed is SUSE, Failsafe SUSE, Windows XP, and Floppy. The Windows is my XP install and it loads fine sadly it is actually what I'm using now because it is the only thing left that I have my network key saved so I can get on this forum.
Looking on SUSE I notice that the 50gig partition formerly known as Ubuntu still exists I figure no problem add the partition back on to the boot-loader and I'm good to go. Added it and when I select to load it nothing happens it starts to then reverts back to the OS list. Does anyone A) Know how to resolve this or have any ideas. B) Think I can at least copy files off that 50 gig partition to an external hard drive.
View 9 Replies
View Related
Aug 11, 2009
I keep getting hundreds of SSH failed logins per day. Is there a way with iptables, i can say if a user connects too to port 22 over 8 times in 10 minuntes, then block them for an hour?
View 7 Replies
View Related
Jan 9, 2011
When I try 'makebootdisk' and get to the 'format' stage, it tells me: "The attempt to format the floppy disk in /dev/fd0 has failed ..." The disk is fine, and can be read from, but the above msg. shows up instantly -- the light on the drive doesn't even come on. I'd expect this to be a routine problem but I can't find any solutions either here or on the web.
View 2 Replies
View Related
Dec 27, 2010
I've been googling and couldn't find solution to my problem. In the past I was able to get around dual boot with Win XP but that Win 7 seems to be more resistant to dual boot. I have a Toshiba Portege T110 that came with Win 7 home edition. I parted the hdd using gparted and put Linux on extended partition. It was OK up till then. After installing Opensuse 11.3 and installing Grub in extended partition, grub came up but when I chose windows, I got error from windows boot manager saying it couldn't find winload.exe. I tried to manipulate the grub by typing:
rootnoverify (hd0,1)
makeactive
chainloader +1
boot
That didn't work at all. So I reinstalled Win 7. After Win 7 back up, I again tried to fix grub by doing this:
find /boot/grub/menu.lst (this gives hd0,5)
root (hd0,5)
setup(hd0)
quit
After rebooting, grub came back but when I tried to access win 7, I again got the black screen saying my winload.exe is missing. I'm reinstalling my win 7 for the 2nd time now. But I'd still like to get the dual boot with Opensuse 11.3 to work. What have I done wrong? Should I put grub in MBR or the mount point / ? or should it be left alone in extended partition? And how do I move grub to different place?
View 9 Replies
View Related
Jul 25, 2010
i do not get this i have a computer here that i installed ubuntu 10.04 on it side by side with windows using the ubuntu installer now windows will not boot at all it just restarts every time we try to boot into it now im not stupid i tryed reparing the os many times with the disk no luck when i was exploring in the windows cds command line it showed that his intire os was moved to the d:/
View 14 Replies
View Related
Mar 15, 2011
I install windows XP and then unix centos. But again when I reinstall Windows xp then my unix centos not shows in boot menu. It automatically goes in windows xp. Now how can I recover my Unix centos.
View 1 Replies
View Related
Mar 3, 2010
A few minutes ago I was using google chrome when suddenly the scroll-lock indicator on my keyboard turned on... I pressed the scroll-lock key, but nothing happened, the light remained. I opened a terminal and ran "top" to find what processes were running when I was automatically logged out. I logged back and checked the logs and found the following entries in my auth.log:
Code:
CRON[2971]: pam_unix(cron:session): session opened for user root by (uid=0)
CRON[2971]: pam_unix(cron:session): session closed for user root
[code]....
View 1 Replies
View Related
