Got a problem here with my xsane scanner. my printer is HP Officejet 6500 wireless. when i run xsane when i have a document to scan it says error: failed to open device 'hpaio:net/officejet_6500_E7009n?ip192.168.1.20':error during device I/O.howcan i use again my scanner?
View 4 RepliesI have a HP Office-Jet 6110 All-In-One for about 5 years now and I havve been using it on Suse and openSuse without a problem all these years. This morning I wanted to scan something and suddenly realised that the scanner is not working. I can print but not scan. i tried to set up the scanner using YaST like I have done for the past 5 years but it#s not working. Hpaio shows that no scanner is available for this driver. I can#t install the scanner. What has changed in 11.2 that devices that worked before are not working anymore?
View 7 Replies View RelatedThis is something weird, I installed Xsane with Xsane-gimp but its not starting. It shows its doing something but it simply quits. Here is the error that I get while starting it from console
Code:
xsane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory
I have a new hp photosmart c4780 printer, and it's not working with gimp (which is the REASON i upgraded from fedora 10 to 12). I upgraded to 12 after i bought it a few weeks ago, and still can't scan from it. I have sane, and xsane installed
View 8 Replies View RelatedMy setup:
- scanner - Canon MP640
- sane 1.0.21
- xsane 0.997
Problem: xsane recognizes my scanner, but when I try to "Acquire Preview" or scan it doesn't do anything. It's like it can't communicate with the scanner. It waits till I click cancel.Sane is setup correctly - I tried skanlite and it works just fine
Recently xsane has stopped detecting my MFP (HP Deskjet F2280). My setup has not had any hardware changes and the only software changes in that time have been the periodic Synaptic updates. Before this hiccup all had been well for over a year. If I run xsane it thinks a while (10 sec?) and tells me in a little panel no devices were detected. If I run lsusb, it finds the device, but after all it is a printer/scanner and the printing function continues to be OK so this is not a surprise.
I do not know enough to understand all the lsusb output to know if anything is amiss in the detail. What is it that xsane needs so that it detects the device as a scanner? Is there a file or specific stuff in a file which I could get from an old backup or edit (carefully!) by hand? I don't need the scanning function often enough to pin down what might have done the mischief.
I would like to configure the button of my printer officejet 4500. However I do not manage to use scanbuttond daemon. How to test key pressing? It seems that nothing is seen by scanbuttond ... when I manually press a key on the printer.
Code:
$ dpkg -l | grep scan
ii gawk 1:3.1.7.dfsg-5 GNU awk, a pattern scanning and processing language
ii libsane 1.0.21-9 API library for scanners
[Code].....
I'm using debian lenny, I bought a new Hp officejet j4500 scanner but the xsane is unable to detect the scanner. It says device not found. If I run xsane as root it detects and works properly it is obvious.I have added the user to scanner,saned and also to root user group.
View 2 Replies View Relatedwe were able to get my officejet g55 and others' g85s working with karmic. the old tricks are not working for me.
i have lucid 64-bit.
I have three computers with wireless and wired connections to a HP Officejet 6500A Plus all-in-one that I purchased a few months ago. Two of the three are running Ubuntu (versions 8.04 and 9.10). By Christmas, I'll be getting a new computer and upgrading to an Ubuntu v. 10.xx or 11.xx. In the first few weeks after I got the 6500, I had no trouble printing (although in 8 years using Linux, I've never been able to scan ...). For the last couple of weeks, however, I've been unable to print. I keep getting messages saying that the printer is not connected. I have re-installed the printer drivers and run hp-setup several times but to no avail. Its latest trick is to start spitting out paper with a line or more of ASCII symbols at a very rapid rate. The third computer is a Windoze 7 box that my son connects to wirelessly but he can no longer print as well.
View 1 Replies View RelatedI just installed an HP Officejet 6200 on a Slackware 12.1 machine. It uses a USB interface. If I am on the machine, I can print to it with no problem. When I am on my Debian or Centos machines, I cannot. I have midified the cupsd.conf file to allow everyone to connect to it but so far have not had any success. Port 631 is open on all machines. I have explicitly added a hosts allow 192.168.0.0/24 line in several portions of the conf file with no luck. If I use the cups interface on any of the machines using localhost:631 as the address, I can not only see the printer I can print to it, but I noticed, I am actually attached to the Slackware machine where the printer is located. Can someone suggest a debugging method to help?
View 7 Replies View RelatedI just bought the HP Officejet Pro 8610. I got it all hooked up and tried to print a test page. All I got was page after page of nothing. I am running Debian Weezy on an AMD chip. I had an older HP all in one that worked but the print heads failed. How do I get the 8610 to print.
View 7 Replies View RelatedAnyone know where I can get a driver for that printer? I checked HP website and they don't make a driver for Fedora -- only MS-Windows and MAC. So how do I send something to that printer which is connected via USB cabel ?
View 3 Replies View RelatedI have a HP Officejet 6500 E709a printer, everything works fine except that I cannot print with color. I go to admin, open the config for printer, and print the test page but I get no color. Also, in the properties of the printer I cannot see the level of the ink. It says this info is not provided by the printer.
View 1 Replies View RelatedI've just set up the printer, with drivers, etc..., but I also need to set up the fax for future use. Just wondering how to do that: There's no option for fax in System --> Administration --> Printing
View 5 Replies View RelatedI installed the 64-bit version of OpenSUSE 11.4 last week and tried to print from it today. I couldn't get anything to come out. I've tried both USB and network printing, and nothing ever works. Any attempt to print anything results in the HPLIP Status Service app telling me the job is "completed" immediately, with nothing printed, but the CUPS web interface reports "/usr/lib/cups/filter/hpcups failed".
It's connected to the network router and hp-setup discovers it when I use manual discovery and give it the IP address, but it still won't print even a test page, whether as root or as a user. I've also used the CUPS web interface to add my user to the list of users allowed to print, and added my user to the lp group. But I still get the same error and nothing ever prints.
I have had good success with the HP OfficeJet 6310 printing and Karmic. However, recently when printing, the print job stops after a certain amount of pages ( when printing a multiple page document ). The first page almost always prints immediately. This issue occurs with PDFs, OO Writer documents and OO Spreadsheet documents. The printer status window on the printer shows "printing" and the print manager in Gnome shows printing. Sometimes the printing completes after several minutes. Other times I end up killing the job and powering down the printer.
View 9 Replies View Relatedafter an update to 11.2 (from 11.1), 64 bit, I don't get the printer to work. I reinstalled the driver and checked in cups: it says that the printer is available and waiting for a job. When I send something to the printer, nothing happens. The priont job will be stopped immediately. The printer is properly connected: xsane finds the scanner, that is part of the printer, without a problem. The printer is also ok: I can copy documents, it just works fine.
[Code]...
Thought I'd give back to the community, at least something. HP OfficeJet 6500 success! Print/Scan/Fax Opensuse 11.1 Go here and download to your desktop. HP Linux Imaging and Printing Then simply do the konsole thing to run the installer, then easy to follow the prompts that appear. I'm hopeless and even I can do it, just look at all my previous noob questions. You then have printer, scanner that work perfect. (Gnome 11.1)The printers are quite cheap, $128AUD Dick Smith etc
View 5 Replies View RelatedI have a HP Officejct Pro 8000 Printer hooked to UBUNTU 9.10 on a system 76 box. The printer is not loading paper properly. I see references to this issue on various websites and I saw at least one reference to new drivers but alas they were all for windows. I checked the repository and I have the latest and greatest HPLIP. Does this mean I have all of the latest drivers?
View 2 Replies View RelatedSince upgrading from Ubuntu 10.04 to 10.10 my HP Officejet 6313 has lost contact with the system.
View 2 Replies View RelatedFedora 12
installed system-config-printer
scanner works just perfectly usng xsane
printer shows in printer list, properties are accessible. yet it does not print.
print status shows: "Printer not connected?"
I had no problems with it the last time I compiled it on this box under the same distro and version but this time I keep getting this error... Code...
I've googled "xsane-back-gtk.o" but there's very little on it and nothing I can use to fix it. Anyone have an idea what's wrong or missing?
I cant scan in 1200 dpi resolution with xsane, it only shows (75,150,300, 600) range of scanning.
My printer is a Canon Pixma MP160, and it can scan to 1200 using xp in virtualbox..
How to get 1200 option in xsane?
I have scanner working nicely, but...When I launch xsane, the scanning for devices upsets my tv-tuner.Xsane accepts a device name in the command line, but how to put it there?sane-find-scanner gives:found USB scanner (vendor=0x04e8, product=0x341b) at libusb:003:003found USB scanner (vendor=0x0c45, product=0x602d) at libusb:002:002
View 1 Replies View RelatedI started a thread that just brushed on the topic of running Xsane to scan with my HP c6380. However, the subject did not go very deep. It was alot about the printer, but not very much about scanning. It was also a previous installation and version of FedoraKDE. Now, I would like to take a moment to ask how to get Xsane up and running so that I can scan with my printer. I have it installed using $yum. However, the icon has not appeared anywhere and I am stumped.
View 14 Replies View RelatedI want to send a fax using xsane image scanning program.I've captured the image of the document I want to fax , but I just don't see any option to fax it.
View 1 Replies View RelatedI've been using Ubuntu 9.10 'in anger' for a couple of weeks now and overall I'm impressed. However, a couple of days ago my old Epson C46 (which had been working fine under Karmic) died, and I had a look for a replacement.
I decided on a Canon MP270 because Canon seemed to have gone to the trouble of providing Linux drivers on their website. I even phoned Canon and they confirmed it should work fine.
Today the AIO arrived and I downloaded the printer and scanner drivers from Canon. I could't get the install.sh files to run - tried ./ sudo and sh etc, no joy. Anyway, I used the package manager to install the .deb files and that seemed to go OK.
The printing side of things works fine but I can't get the scanner recognized by Xsane.......
How would I change the permissions for a specific program(xsane)? For some reason Xsane only works now if I run as root. It was working fine before the latest kernel update, now I get "cannot start scanner: invalid argument" unless I run the program as root. Also images that are scanned are nor accessible unless I am root
Epson Stylus NX215
Ubuntu 10.04 64 bit
The printing feature works fine still.
Iscan is installed from avasys.jp
Rolled back to old kernel and problem still exists
When ever I try to save a scanned image with Xsane i get the following message:
Child process error
failed to execute OCR command: gocr
No such file or directory.
I have tried several different directories and file names with the same resut.