Ubuntu Installation :: XSane Stopped Working - No Device Detected
Mar 29, 2010
Recently xsane has stopped detecting my MFP (HP Deskjet F2280). My setup has not had any hardware changes and the only software changes in that time have been the periodic Synaptic updates. Before this hiccup all had been well for over a year. If I run xsane it thinks a while (10 sec?) and tells me in a little panel no devices were detected. If I run lsusb, it finds the device, but after all it is a printer/scanner and the printing function continues to be OK so this is not a surprise.
I do not know enough to understand all the lsusb output to know if anything is amiss in the detail. What is it that xsane needs so that it detects the device as a scanner? Is there a file or specific stuff in a file which I could get from an old backup or edit (carefully!) by hand? I don't need the scanning function often enough to pin down what might have done the mischief.
View 2 Replies
ADVERTISEMENT
Aug 8, 2010
My setup:
- scanner - Canon MP640
- sane 1.0.21
- xsane 0.997
Problem: xsane recognizes my scanner, but when I try to "Acquire Preview" or scan it doesn't do anything. It's like it can't communicate with the scanner. It waits till I click cancel.Sane is setup correctly - I tried skanlite and it works just fine
View 6 Replies
View Related
Mar 18, 2011
Im running suse 11.4 on my laptop, everything was ok, this morning, I've attached two or three usb flashes to my laptop and mounted them by device notifer but after an hour, I've attached another usb flash and device notifer stopped working for any usb device or cd/dvd rom actions... (I mean that it doesnt shows ant action, completely emotionless! ) all of them are mountable by command line.
and after that my dolphin places, doesent shows removeable devices and other partitions enymore (so i couldnt mount any partion using gui)
View 3 Replies
View Related
May 7, 2010
Using xsane with HP scanjet 3970 scanner. It used to be that when I plugged the scanner in and started the xsane a window would come up asking if I wanted to use my HP scanner or my Hauppauge video card. Well, that window no longer comes up and the Xsane wants to use my video card. When I try to "scan" the program closes and all the windows associated with it disappear.
View 1 Replies
View Related
Feb 8, 2010
I am new to Linux and after a lot of research I settled on CentOS to be my OS for Linux. But I am having trouble with sound right now as I can not play audio. The command system-config-soundcard opened a gui for audio configuration saying following device is detected - Intel Corp. 82801(ICH9 Family) HD Audio Controller.
Ouput for some commands are given below::
[root@localhost ~]# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) .....
[root@localhost ~]# uname -r
2.6.18-164.el5
[root@localhost ~]# cat /etc/redhat-release
CentOS release 5.4 (Final)
Clicking on the volume icon gives me message that either Gstreamer plugins are not installed or sound card is not configured.
While Trying to install gstreamer using YUM, I got following message:
[root@localhost ~]# yum install gstreamer
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile .....
Setting up Install Process
Package gstreamer-0.10.20-3.el5.x86_64 already installed and latest version
Package gstreamer-0.10.20-3.el5.i386 already installed and latest version
Nothing to do
[root@localhost ~]#
So I guess gstreamer are installed but how to configure the sound card or is there any other problem.
View 9 Replies
View Related
Mar 11, 2011
I've got a SCSI scanner that is being detected by the kernel on Fedora 14, but XSane does not see it. If I run "sane-find-scanner" it says that noSCSI or USB scanners are found.The scanner is a Cacham Splendeur 3024, model VM3552. I believe this scanner is the same as the Relisys Scorpio VM3552. In /var/log/messages, the following entries show up as soon as the scanner is warmed up:
Code:
Mar 11 13:34:45 dt kernel: [22595.116042] usb 4-2: new full speed USB device using uhci_hcd and address 41
[code]...
View 4 Replies
View Related
Aug 7, 2014
I use Bluetooth on my laptop since many month, but afer a recent update (running jessie), my device stopped being usable :
gnome Bluetooth interface say "no Bluetooth device", and here is lsusb :
Code: Select all16:30 mathieu@kubrick ~ % lsusb
Bus 002 Device 003: ID 5986:0315 Acer, Inc
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
16:34 mathieu@kubrick ~ %
and lspci :
Code: Select all16:38 mathieu@kubrick ~ % lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
[code]....
most sad is :
Code: Select all16:41 mathieu@kubrick ~ % hcitool dev
Devices:
16:41 mathieu@kubrick ~ %
View 0 Replies
View Related
Jan 29, 2010
I have the 64 bit 13.0 version installed. I have an hp f4440 all-in-one printer installed and connected via usb. I downloaded and installed the new hplip 3.9.12 after removing the older hplip 3.9.4 version. I used CUPS to install and setup the printer. No problems, I let it search and it found the printer right away. When I ran XSane it could not find the device. I clicked help and it gave some steps. The first being to try as root. I opened a root terminal and entered xsane, it found and opened after a warning about running it as root. I checked and my user name and root are entered in the scan group.
View 5 Replies
View Related
May 1, 2010
The one thing that has stopped me switching over to Ubuntu was getting my scanner to work. I finally resolved this issue. Here are the set I followed to get it working. When trying to scan with XSane I would get the device not found alert. Using the sane-find-scanner command would find the scanner as a USB device. found USB scanner (vendor=0x04b8, product=0x0851) at libusb:001:006 I amended the "rules" file for xsane /lib/udev/rules.d/40-libsane.rules added the two following lines
[code]...
Now I have a fully working colour scanner, bye bye windows
View 6 Replies
View Related
Aug 18, 2011
I'm trying to install 11.04 onto a custom build pc.I have burned an install CD of the desktop edition and have inserted it into the drive, started up, and tried to run the live version. IT pops up, everything works, Hooray! I go to install it to disk and I follow all the prompts and it needs me to reboot to start. YAY! I click to reboot, remove the CD as requested, and then I get the "No Boot Device Detected!" error message.
I then tried installing straight from the CD and not booting into the live version. I follow all the steps and get a congratulations on installing it and all I need to do it reboot. I remove the CD, reboot, and BANG! the same message. I'm not sure what's up or even where I can get information from because there is no BIOS splash screen or anything to naviagate through.
System Specs:
Intel Atom Mobo/Proc (1.66Hz)
8GB Corsair RAM
1 slim optical drive (SATA)
1 2TB Seagate HD (SATA)
1 Case/PSU combination
EDIT1: Currently I am checking the live CD for defects (though it has an internet connection so I'm unsure whether the CD matters).
View 2 Replies
View Related
Jan 11, 2010
I have a Epson Stylus SX115 All In One Printer which i connected to ubuntu 9.10 the other day. Upon installation the drivers for the stylus SX 115 were not available, but there were drivers for the stylus SX110 which i then installed. Printing is fine although for some reason even though i connect via usb cable the printer is not detected as a external device. I have to pull out the usb cable without unmounting-what should i do?
View 8 Replies
View Related
Apr 4, 2010
I am new to linux having just abandoned Windows due to stability issues. I have a Hauppage remote with a usb ir receiver. This worked fine under windows using the drivers for the windows media center remote. I can't however get this to work under Linux. What I am really looking for is a method, perhaps using a command line in the terminal window to be able to test and see if the OS has actually detected the device. I have tried irw, but there is no response. If I know that the device is connected, then I can start looking at issues of identifying the correct drivers for the device.
View 6 Replies
View Related
Feb 3, 2010
I'm using debian lenny, I bought a new Hp officejet j4500 scanner but the xsane is unable to detect the scanner. It says device not found. If I run xsane as root it detects and works properly it is obvious.I have added the user to scanner,saned and also to root user group.
View 2 Replies
View Related
Jan 15, 2010
Ok, installing the Epson DX8400 printer driver was easy... I just turned it on, and Ubuntu searched and installed the printer itself.
But scanning... that's another story. In Ubuntu 9.04 the trick was as simple as installing libsane-extras in Synaptic, but this doesn't work in Ubuntu 9.10! When I try to run XSane, it simply replies that there is no available device...
View 5 Replies
View Related
Apr 7, 2011
I am working on an embedded system, which is an USB MSC device that supports some vendor specific scsi commands. I am using FC10 laptop as USB host for testing, and it runs some small apps based on sg3. All has been well for ~ a week. The FC10 laptop is able to communicate with the device and retrieve data. Suddenly, starting from today, the laptop is not able to properly detect the device. When plugged-in, the MSC device is detected as input device (I thought). This is observed from "dmesg" output and changes in "/dev/input/".The device under development is running at full speed. When I connect to winXP, no problem. A windows file explorer pops up, showing the content of the drive.Also, the FC10 has no problem with other USB flash drive (high speed).
View 1 Replies
View Related
Mar 22, 2010
This is something weird, I installed Xsane with Xsane-gimp but its not starting. It shows its doing something but it simply quits. Here is the error that I get while starting it from console
Code:
xsane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory
View 2 Replies
View Related
Jan 7, 2010
I have a new hp photosmart c4780 printer, and it's not working with gimp (which is the REASON i upgraded from fedora 10 to 12). I upgraded to 12 after i bought it a few weeks ago, and still can't scan from it. I have sane, and xsane installed
View 8 Replies
View Related
Jan 26, 2010
Got a problem here with my xsane scanner. my printer is HP Officejet 6500 wireless. when i run xsane when i have a document to scan it says error: failed to open device 'hpaio:net/officejet_6500_E7009n?ip192.168.1.20':error during device I/O.howcan i use again my scanner?
View 4 Replies
View Related
Aug 11, 2010
Evolution e-mail has stopped working. Un-installed everything evolution using Synaptic and re-installed. No change: address book comes up but mail, calendar etc do not work. Clicking on any causes gray out and leads to a force quit. So how do I un-install evolution completely and then re-install as a completely fresh install. I am using Ubuntu 10.04 Lucid Lynx.
View 2 Replies
View Related
Aug 17, 2010
I'm a huge fan of Linux (although still a noob) but require Windows for work. I have a laptop for work on which I was dual-booting XP and Ubuntu. After a few boots, XP will no longer start. Originally the notebook had a windows partition and a Dell Recovery partition. I used gparted to carve out a partition for Ubuntu from the windows space and I made a dedicated GRUB partition right in the front of the disk because my BIOS couldn't boot from LBAs.
Now, the computer boots into grub. From their I can either load the ubuntu kernel from its partition or I can chainload to the ubuntu partition which loads the local copy of grub. I even went so far as to make entries in the menu.lst files so that you can navigate back and forth between grub on the boot partition and grub on the ubuntu partition. On the boot partitions grub, I also made an entry to chainload windows from its partition. And then I edited the boot.ini in Windows to allow me to go back to the grub menu on the boot partition. (I need to create a bin image of the boot sector for that)
Anyway, I followed lots of instructions that I cobbled together from googling. Everything was working fine for a few days. Seemed I could move back and forth between "boot grub", "ubuntu grub", and windows bootloader. Both OS's were working fine. Then, somehow, XP stopped working. I tried using super grub disk, but this only gets me into Ubuntu. Basically, Grub sets the root to the appropriate partition, chainloads, and then thats it. Nothing. It's like theirs no IPL on the windows partition. But I used testdisk to check the partition and it has a valid bootsector. Also, I can still mount it in Ubuntu and look at my windows files. Seems like NTloader never starts but I don't get any error messages. After the grub commands echo, I get nothing.
I've also made a bootable USB key with Windows Revovery Console on it. I wanted to use it to fix the windows partition and make it bootable again. However, the recovery console never starts up. I get the blue screen of death and I think it's because it doesn't know what to make of the Ext formated partitions.
[Code]...
View 8 Replies
View Related
Nov 9, 2010
I upgraded from 9.10 to 10.04 and my VMware stopped working. I got a message to recompile into the kernel. I followed the prompts and it was unsuccessful. I tried to uninstall and reinstall VMware getting the same error. See below an extract from the log file.Before you can run VMware, serveral moduels must be compiled and loaded into the running kernel.
stopped vmware services - ok
Error in log:
Nov 09 07:59:34.560: app-3077531328| Trying to find a suitable PBM set for kernel 2.6.32-25-generic.
Nov 09 07:59:34.560: app-3077531328| Building module vmnet.
Nov 09 07:59:34.560: app-3077531328| Extracting the sources of the vmnet module.
[code]....
View 5 Replies
View Related
Mar 23, 2011
I had Ubuntu running on my toshiba netbook for monthings using UBI, yes2day I click on the update funcation and then I count not boot into it anymore. I get a error "NO WUBILDIR". I was so mad that if months of getting it where I need it stopped then I installed it and reinstalled it but got the same error. I tryed this like 3 times and I am still gettting the error.
View 3 Replies
View Related
Apr 5, 2011
Compiz stopped working entirely recently and I've been trying to reinstall different version, nothing helped. Now when I look at synaptics, the version of the different package (compiz, ccsm, bcop...) are of different version (from 8.2 to 8.6). It tried reinstalling only from synaptics and it didn't change anything. I'm not sure that'll fix my problem, but for sure it doesn't help. Does anybody know what repos i should use to get a clear installation?
View 1 Replies
View Related
Aug 17, 2011
i installed a linux flavor (Ubuntu 10.04 LTS, Ubuntu 11.04, and then Linux Mint).. They all gave this same problem about the wired network (see the picture). The connection seems to be fine but i can't connect to internet or even to my router. Which is weird since it knows my router IP 192.168.1.79. Wasted the whole night trying to figure it out but i just can't understand why. I have a separate partition on this computer to run Win7 also and confirmed that the network connection is working.
View 9 Replies
View Related
Sep 16, 2010
My system (ubuntu studio 9.10, 32bit) was working just great. Then I installed dropbox via synaptic -- and it worked just great.Then I got some very strange behavior in how my tabs (firefox) worked, and the windows on the system would no longer respond.I restarted.... and the behavior got worse.. my menu would not show up, and when I opened dropbox -- the windows would not move, their menu(s) did not work, and I could not close them.
I tried to:
-- reinstall gnome
-- reinstall nautilus
[code]....
View 1 Replies
View Related
Oct 5, 2010
I had Ubuntu installed in Windows XP (with Wubi). One day my motherboard, let's just say stopped working. So, I had to replace my motherboard..., well I bought a new PC, but with the Hard Drive of the old one. When I first started it i got the same boot screen letting me choose between Ubuntu and Windows XP. Well, you can pretty much figure out that none of them worked. So, I installed Windows 7 (as the new configuration is pretty powerful). So, from the boot menu Windows XP was replaced by Windows 7 but still Ubuntu stays there and I can't figure out how to delete it.
View 2 Replies
View Related
Oct 11, 2010
What do I do to fix my VMware Workstation after I upgraded Ubuntu 10.04 t0 10.10. It said that I needed to compile and reinstall a few modules in to the running kernel. Than it fails to do it and tells me to look in the file from which the output is: $ sudo cat /tmp/vmware-root/setup-6801.log Oct 10 21:51:33.262: app-140341270488832| Log for VMware Workstation pid=6801 version=7.1.0 build=build-261024 option=Release Oct 10 21:51:33.262: app-140341270488832| The process is 64-bit.
[code]...
View 3 Replies
View Related
Oct 11, 2010
I updated my Ubuntu to Meerkat last night. everything seems to be working fine, except when i went to iplayer, it told me flash wasn't installed. I followed the link, and installed flash from APT source. In the software centre it is listed as installed. However, still cannot view flash videos.i have tried rebooting too.
View 2 Replies
View Related
May 12, 2011
I've just upgraded my Ubuntu version a week ago and got a problem that the Unity UI won't running after upgrade. My laptop is Dell Inspiron 14R which is i think is more than capable for running Unity 3D. When I rebooted after upgrade there was just a blank wallpaper screen, without Unity interface at all.
View 7 Replies
View Related
Feb 25, 2010
Firefox 3.6 "Namoroka" stopped working after a recent update. Clicking on my panel launcher or the launcher in the applications menu does nothing. I even tried starting Firefox from the terminal and got an error message: "(firefox-bin:3592): GLib-WARNING **: g_set_prgname() called multiple times", whatever that means.I would be willing to rip out Firefox and start all over again but I don't know how to remove the 3.6 version. I couldn't find a method in the Software Center for doing that graphically.
View 7 Replies
View Related
