I have scanner working nicely, but...When I launch xsane, the scanning for devices upsets my tv-tuner.Xsane accepts a device name in the command line, but how to put it there?sane-find-scanner gives:found USB scanner (vendor=0x04e8, product=0x341b) at libusb:003:003found USB scanner (vendor=0x0c45, product=0x602d) at libusb:002:002
View 1 RepliesThis is something weird, I installed Xsane with Xsane-gimp but its not starting. It shows its doing something but it simply quits. Here is the error that I get while starting it from console
Code:
xsane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory
I have got a question about some terms in Debian package name, for example: 1:9.6.ESV.R3+dfsg-0+lenny1 What do ESV, R3 and lenny1 mean? I can't find information about it anywhere...
View 2 Replies View RelatedDuring installation when i set the partitions i have to provide a Name and a Label. What is the difference of these? It looks like only one should be needed. Any problems of using the same name for both?
View 3 Replies View RelatedI have a problem defining persistent device naming on a Debian Lenny server.I have:RAID1 controller on the server machine with two SCSI disks.external storage with RAID5. I have / mount on the first partition on the server SCSI disk and /storage mount on the external storage.
I'm experiencing a problem: The system recognizes the system disk (RAID 1), as sda or sdb - randomly.I want: To control the recognition, and tell the system that sda (sda1) will always be the system disk.The motivation: GRUB is configured to work with sda, and when the system disk doesn't, boot process fails, and I end up in the initramfs shell-like interface.
Booting the kernel
.
.
.
mount:mounting /dev on /root/dev failed: No such file or directory
mount:mounting /sys on /root/sys failed: No such file or directory
[code]....
I have a problem defining persistent device naming on a Debian Lenny server.I have:RAID1 controller on the server machine with two SCSI disks.external storage with RAID5. I have / mount on the first partition on the server SCSI disk and /storage mount on the external storage. I'm experiencing a problem: The system recognizes the system disk (RAID 1), as sda or sdb randomly.I want: To control the recognition, and tell the system that sda (sda1) will always be the system disk.The motivation: GRUB is configured to work with sda, and when the system disk doesn't, boot process fails, and I end up in the initramfs shell-like interface.
Code:
Booting the kernel
.
.
.
mount:mounting /dev on /root/dev failed: No such file or directory
mount:mounting /sys on /root/sys failed: No such file or directory
[code]....
I can't figure out how to specify a particular scan size in xsane. The only place I can find to change size is in preview, where there is a drop down list of choices including letter port. How do I specify an arbitrary size in inches?
Running Ubuntu 9.10
I cant scan in 1200 dpi resolution with xsane, it only shows (75,150,300, 600) range of scanning.
My printer is a Canon Pixma MP160, and it can scan to 1200 using xp in virtualbox..
How to get 1200 option in xsane?
After a successful install of the MFC-J4420DW printer and scanner using Brother's install utility, I am experience severe battery drain and xsane freezes (total system lockup, requiring using CONFIG_MAGIC_SYSRQ keyboard command REISUB or hard reset).
The Brother support page and utility/drivers are found here: URl....My laptop is the HP Elitebook 8540W and I am running Debian 8 using LVM, separate partitions for /home, /var, /temp, /swap, and /. I have looked at logs in /var/log. kern.log, daemon.log, messages and dmesg, but have not found any relevant info ...
I purged all drivers/packages and tried a manual install using each deb package, but ran into some permission errors, so I purged again. I also purged xsane and reinstalled it, then did a complete printer reinstall using the brother Driver Install Tool.The tool works great, full functionality for the MFC-J4420DW. But I know I can't live with the power drain, and I would really prefer to use Gimp and the xsane plugin rather than simple scan ..
Ok, installing the Epson DX8400 printer driver was easy... I just turned it on, and Ubuntu searched and installed the printer itself.
But scanning... that's another story. In Ubuntu 9.04 the trick was as simple as installing libsane-extras in Synaptic, but this doesn't work in Ubuntu 9.10! When I try to run XSane, it simply replies that there is no available device...
After I solved the issue about printer, now I'm struggling to make the integrated scanner of lexmark S305 work with debian.The device is connected to the network through integrated wifi connection (it is NOT connected with usb to a host, which act as a server), but I don't know how xsane can recognize it.I have just added the ip address in /etc/sane.d/net.conf, but it doesn't work at all. I read some tutorials on how to configure a network scanner, but they are all related to a scanner connected to a computer through usb, and then shared on the network by this computer.The second issue (probably more important) is that xsane probably doesn't recognize even with usb connection the scanner. The latter is not listed in the supported scanner list. Indeed connecting by usb to my laptop, it doesn't work. I haven't found any driver for it, but probably it could work with driver of other scanners.
View 1 Replies View RelatedHow can I make workspaces have names under 10.04? Under 9.10 I can given different workspaces different names, under 10.04 I can't. Workspace-switcher-preferences has less options.
View 1 Replies View RelatedI have a number of partitions, each having an icon on the Desktop.However, they are only referred to by size of partition. What I would like to do is give them a relevant name, e.g. photos, MP3s, etc.My fstab uses UUIDs. Can I change the names while using these to refer to the partitions?
View 5 Replies View RelatedI have 4 SATA hard drives, and they are named sda, sdb, sdc and sdd. My problem is that the drives always randomly switch between these names when I restart my system. It is not really a problem as far as mounting, because I use the UUID option. I'm using the sensors applet to monitor the temps of the hard drives, and I can never tell which one is which, because the drive names are always changing.Is there any way to have the drives named the same way every time?
View 3 Replies View RelatedI'm doing a few tests with fedora 15. I'm surprised because they changed the naming way on network devices. eth0 is now called em1.At every fedora I have found the configuration files in /etc/sysconfig/network-scripts, but today I can't find them.
View 1 Replies View RelatedNeed help on how the scsi and multipathing works in Linux. From the docs i have read, i understand that by the use of multipathing we can assign multiple paths to a SAN partition. If there is a problem then one path will failover to other path.However, i am not clear on how linux recognizes the SAN partitions using the multipath drivers. For e.g. I have a HP Proliant server on which we have the following mounts:
Filesystem Size Used Avail Use% Mounted on
/dev/cciss/c0d0p3 59G 11G 46G 20% /
/dev/cciss/c0d0p1 494M 27M 443M 6% /boot
[code]...
What's most commonly used and what do you prefer? C-Style (this_is_my_function), Camelcase 1 (thisIsMyFunction), Camelcase 2 (ThisIsMyFunction
View 10 Replies View RelatedI just installed Fedora 12 and grub is not working for me. I have 2 physical drives, and installed Fedora on sdb (win xp is on sda). I picked the option that the computer booted from sdb when I installed. I then went and switched the boot order in the bios so that the computer would boot from sdb. Now Fedora boots fine, but when I try to boot into windows I just get a blinking cursor. I tried booting to windows manually (via picking that drive from the bios options) and that works fine.
I tried to edit grub.conf, but wasn't sure how to address the appropriate hard drive. How do I know what to fill in? The linux drive is (hd0,0), and grub tried to make windows (hd1,0). How do I know what to put in (hdx,y) for the windows partition? Grub tells me I have a /boot partition so everything is relative to that.If I'm way off base, please let me know. Is there a way I can just re-run grub so that it looks for everything anew? I also looked at device.map and sda is hd0.---------- Post added at 02:42 PM CDT ---------- Previous post was at 02:37 PM CDT ----------If it helps, this is my grub.conf:
Code:
# grub.conf generated by anaconda
#
[code]....
I kept bumping into it all the time, only now when I need it I can't find it anywhere! What architecture is the kernel of my machine?
2.6.18-194.el5
I'm running Ubuntu 11.04 on my desktop and the 70-persistent-net.rules file seems to be ignored. The ethernet interfaces are randomly shuffled around on boot (i have 4 interfaces). The original one was configured to have a static IP address (eth0). Is there anything that prevents the /etc/udev/rules.d/70-persistent-net.rules from being applied/used?
View 1 Replies View Relatedi have a centos 5.5 server running tomcat,oracle xe,apache etc..i would like to be able my windows machine to access this server by name, and not ip, for example have http://backserv:7080 for oracle xe web admin and so on..i know one way is DNS, but if i install oracle on a windows machine in peer-to-peer network, i can allready access with by it's name. o i'm guessing i should do something with samba, wins or something like that.never mind i got now for the REAL complex stuff of insalling web sphere 7 without user interface (need to look for a response file).
View 2 Replies View RelatedI deciphered that I would have to change the /etc/fstab and grub.conf.
So the question is:
1: Which files must I edit?
2: How do I edit grub.conf to use the sdX scheme?
Is there any document or specification like the Linux Standard Base for the naming convention of commandline options?
View 3 Replies View RelatedI am using a QLA2462 and have got FC storage attached through a brocade switch. As soon when I add more storage for this server on this switch my device naming shifts and this new storage comes in between e.g. as sdb, and the other 2 go to sdc and sdd. I looked around but I can't find a good solution for SuSe 11.2.
View 2 Replies View RelatedAfter upgrade to 10.04, my disks are randomly named (sda, sdb, sdc) at each boot. My drive labeled "XP" is sometimes named "sdb" and sometimes "sdc", while my other drive "DATA" is respectively "sdc" or "sdb". This wasn't the case before upgrade with KUbuntu 9.10.
Due to this random naming, my auto-mount in fstab often fail at boot time !
Any solution for this (not found here by myself) ?
Is this linked to Grub troubles reported many times here ?
Why does the naming of Workspace disappear when you activate Visual Effect? I would like to have them both on.
View 2 Replies View RelatedWhere would i find the list of distribution codes.For example.Code:samba-32bit-3.4.2 -1.1.3.1.x8664.rpmIn above rpm file it is indicated that its release is 1.1.3.1 .The rpm is meant to be run for opensuse.Where would i get the linking of release number and In simple words How would i guess distribution by merely looking at rpm name?
View 2 Replies View RelatedI'm writing a script for asterisk to monitor trunk failure, i do a loop for every trunk it got nad would like to name variable like server1=, server2= naming the server upgoing as the trunk is. here is the scripts:
[Code]....
what i would like to do is name the variable server, username and status with the count variable, like this server$COUNT to have server1 when on trunk one, bu as soon as i add the $COUNT after the server, it seems to try to make it a command, it says that:
Code:
./test.sh: line 45: server1=74.63.41.218: command not found
I had no problems with it the last time I compiled it on this box under the same distro and version but this time I keep getting this error... Code...
I've googled "xsane-back-gtk.o" but there's very little on it and nothing I can use to fix it. Anyone have an idea what's wrong or missing?
I have logical partitions on my drive numbered /dev/sda5 through /dev/sda14.I want to reclaim unused space from one of the partitions in the middle /dev/sda7. First I intend to resize /dev/sda7 by leaving the beginning of the partition as is and shrinking the end to create some unallocated space between /dev/sda7 and /dev/sda8. Then I would like to create a new logical partition in this unallocated space. My question is what will be the device name of the newly created logical partition? Will it be /dev/sda15 (I hope)? Or will it be /dev/sda8 and all partitions after this be renamed?
The GParted manual states that if a partition is deleted, all of the following partitions will be renamed, but it doesn't say anything specifically about renaming partitions after adding a new partition in the middle of a partition table.