I had no problems with it the last time I compiled it on this box under the same distro and version but this time I keep getting this error... Code...
I've googled "xsane-back-gtk.o" but there's very little on it and nothing I can use to fix it. Anyone have an idea what's wrong or missing?
This is something weird, I installed Xsane with Xsane-gimp but its not starting. It shows its doing something but it simply quits. Here is the error that I get while starting it from console
Code:
xsane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory
I am trying to compile Synergy but i can't get it to compile. I get all sorts of weird errors i have the Xtest library installed. Would anyone be able to compile the program for me and give it to me. I have spent hours and i cant get it to work.
View 2 Replies View RelatedI assume that this would be the correct place to put this, because codelite isapplication that you have to download via the Ubuntu Software center to get. But anyhow...I have been playing around with codelite for a little while nowand I wanted to use it for the purpose of learning how to script and write programs in Lua programming languageAccording to the program description it comes with the Lua support built in, but running it proves to me that it is solely a C++ application.
This isn't an extreme problem, though, I've read that Lua is supposed to be programmed through C++ anyhow. I am having only one problem that needs the attention. I ran through the code and got an error telling me that it could not find the #include files for Lua. A quick check of the /usr/include/ files showed me that there werendeed none in there.That being said, I went to the Lua website and downloaded the source and binaries *.tar.gz file, extracted it to a folder called "Lua." I am unable to move the #include files from inside its include folder to the main one on /usr/include/.
I have a feeling it is an administrator problem and that I need something involving the terminal or sudo to reach there. I have read around online, and they almost all say the same thing, telling me to navigate to the folder and "run make." I know what this is and how to do it, but it says that it cannot find the Makefile, which I have seen and know is in the folder, so it doesn't.Moving to the src folder within the Lua folder shows me that there is another Makefile, meaning that I have a second chance to make the files. I navigate to it, and then what do you know? Make works. Until the end, where I get a lot of errors and a termination of the process. Errors include Error 1 and Error 2, which I do not know what they are
I cant scan in 1200 dpi resolution with xsane, it only shows (75,150,300, 600) range of scanning.
My printer is a Canon Pixma MP160, and it can scan to 1200 using xp in virtualbox..
How to get 1200 option in xsane?
I have scanner working nicely, but...When I launch xsane, the scanning for devices upsets my tv-tuner.Xsane accepts a device name in the command line, but how to put it there?sane-find-scanner gives:found USB scanner (vendor=0x04e8, product=0x341b) at libusb:003:003found USB scanner (vendor=0x0c45, product=0x602d) at libusb:002:002
View 1 Replies View RelatedI started a thread that just brushed on the topic of running Xsane to scan with my HP c6380. However, the subject did not go very deep. It was alot about the printer, but not very much about scanning. It was also a previous installation and version of FedoraKDE. Now, I would like to take a moment to ask how to get Xsane up and running so that I can scan with my printer. I have it installed using $yum. However, the icon has not appeared anywhere and I am stumped.
View 14 Replies View RelatedI have a new hp photosmart c4780 printer, and it's not working with gimp (which is the REASON i upgraded from fedora 10 to 12). I upgraded to 12 after i bought it a few weeks ago, and still can't scan from it. I have sane, and xsane installed
View 8 Replies View RelatedMy setup:
- scanner - Canon MP640
- sane 1.0.21
- xsane 0.997
Problem: xsane recognizes my scanner, but when I try to "Acquire Preview" or scan it doesn't do anything. It's like it can't communicate with the scanner. It waits till I click cancel.Sane is setup correctly - I tried skanlite and it works just fine
I want to send a fax using xsane image scanning program.I've captured the image of the document I want to fax , but I just don't see any option to fax it.
View 1 Replies View RelatedI've been using Ubuntu 9.10 'in anger' for a couple of weeks now and overall I'm impressed. However, a couple of days ago my old Epson C46 (which had been working fine under Karmic) died, and I had a look for a replacement.
I decided on a Canon MP270 because Canon seemed to have gone to the trouble of providing Linux drivers on their website. I even phoned Canon and they confirmed it should work fine.
Today the AIO arrived and I downloaded the printer and scanner drivers from Canon. I could't get the install.sh files to run - tried ./ sudo and sh etc, no joy. Anyway, I used the package manager to install the .deb files and that seemed to go OK.
The printing side of things works fine but I can't get the scanner recognized by Xsane.......
How would I change the permissions for a specific program(xsane)? For some reason Xsane only works now if I run as root. It was working fine before the latest kernel update, now I get "cannot start scanner: invalid argument" unless I run the program as root. Also images that are scanned are nor accessible unless I am root
Epson Stylus NX215
Ubuntu 10.04 64 bit
The printing feature works fine still.
Iscan is installed from avasys.jp
Rolled back to old kernel and problem still exists
When ever I try to save a scanned image with Xsane i get the following message:
Child process error
failed to execute OCR command: gocr
No such file or directory.
I have tried several different directories and file names with the same resut.
Got a problem here with my xsane scanner. my printer is HP Officejet 6500 wireless. when i run xsane when i have a document to scan it says error: failed to open device 'hpaio:net/officejet_6500_E7009n?ip192.168.1.20':error during device I/O.howcan i use again my scanner?
View 4 Replies View RelatedI have the 64 bit 13.0 version installed. I have an hp f4440 all-in-one printer installed and connected via usb. I downloaded and installed the new hplip 3.9.12 after removing the older hplip 3.9.4 version. I used CUPS to install and setup the printer. No problems, I let it search and it found the printer right away. When I ran XSane it could not find the device. I clicked help and it gave some steps. The first being to try as root. I opened a root terminal and entered xsane, it found and opened after a warning about running it as root. I checked and my user name and root are entered in the scan group.
View 5 Replies View RelatedI've been scanning in large numbers of old photos for a friend, and up until now, xsane has worked like a charm. Today, however, it's spitting at me. If I try to select a file path in advance, and just save the images, it fails, suggesting that a link exists. (No, I'm putting them directly into the directory in question; no links involved.) I have to bring up the image in the viewer, select Save and select the path for each and every photo involved. Not only that, if I try using the file selection box to show xsane where I want things stored, it doesn't put the path into the box; I have to type it in myself. Considering that I have the best part of a hundred photos to scan, this isn't exactly an option. Does anybody have an idea what's gotten mungged, or how to unmung it?
View 1 Replies View RelatedI installed HPLIP, CUPS, ran hp-setup, and have a scanner detected in root, but not as standard user. I had some directions given to me in this forum, and I tried to follow them, but when I went into the man page as directed by one of the terminal commands, the directions there were cryptic. No success with changing permissions for sane-find-scanner in the file where permissions are supposed to reside. Started looking around down there at a couple of files and all I saw was garbage. how to change permissions for sane-find-scanner
View 6 Replies View RelatedI recently installed 11.4 32bits, and got everything working, including my Canon Lide25 Scanner with XSane. It suddenly stopped working, not seing the device anymore; I suspect it happened after installing VirtualBox, butreally not sure of that.
Basically, as root I can launch Xsane and scan, and Yast also sees the Scanner and the test is succesful, so a permission issue I believe.As I don't know exactly when/why this happened, does anyone know how I could troubleshoot ? Check for UDEV rules or so ? a group I should be in ? I don't know where to start and don't want to fiddle around and break something
lsusb gives : Bus 002 Device 009: ID 04a9:2220 Canon, Inc. CanoScan LIDE 25
I can't figure out how to specify a particular scan size in xsane. The only place I can find to change size is in preview, where there is a drop down list of choices including letter port. How do I specify an arbitrary size in inches?
Running Ubuntu 9.10
I use XSane a lot and have been eliminating tons of paper from my office..Sometimes I have to scan a legal size page. I then save as a pdf file. That pdf file shows blank pages in acroread but works in Document Viewer. Can I modify the PDF file so that acroread will display it?
View 2 Replies View RelatedI want to reduce "Open Gimp, File>>Create>>XSane>>[my_scanner]" into a command-line ... line of command. XD So I can bind it to a key combo with Compiz-config. I just don't know how to find the commands to make Gimp and XSane do that.
View 2 Replies View RelatedI cant find my scanner (Canon MP250). I have installed the printer and it works fine, this using the drivers from canon (canon divers page) and installed the scanner drivers too. Im running:
Code:
$ uname -a
Linux ubuntu 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:27 UTC 2010 x86_64 GNU/Linux
Installed the drivers with
[Code].....
With Lucid I was capable of scanning both with my Epson Perfection 640 U scanner and with my HP-M1120n-MFP network scanner. To get the HP-M1120n to work I had to rename a file which I do not remenber which was. I do not remember where I found the instructions. I am running HPLIP 3.10.6 with Device Manager 15.0. I did a fresh install of Maverick Beta and I am not able to neither scan with the Epson Perfection scanner nor with the M1120n-MFP. As said, both worked with Lucid. As said I had to rename a file to get the MFP scanner to work. I include screen shots to this post.
View 8 Replies View RelatedThe scanner is seen using lsusb command but when i open xsane it is not recognized. Xsane wants to use the webcam instead. I think this happened because i saved the settings of the former scanner a few days ago. Should i delete that setting that is saved in the home>.sane>.xsane directory? The old scanner is a Canon Canoscan lide N1220U and the new one is a Canon Canoscan lide 100. I would appreciate any suggestions as i tried a reboot with no improvement :0)
View 2 Replies View RelatedWhenever I switch on my scanner (Epson V200) then it launches Xsane automatically.
Now I know Xsane is wonderful, but often I want to use Epson's iscan instead, and for other users I prefer Simple Scan. Another thread would be a good place to discuss the reasons.
So I would like to stop my scanner launching anything when switched on.
I have used XSANE for scanning for several years, and it has recently been giving me trouble. It resizes when I copy, and it resizes when I scan into a multipage pdf. It's not drastic, an 8.5 x 11 page gets shrunk down to about 7.5 x 10. I've installed the Gnome scanning utility to get by, but the resolution just isn't as great. I went into Synaptic and marked all the XSane packages for reinstallation and reinstalled them. However, my contrast / gamma settings remained the same, and, as you might guess, whatever is shrinking my output remained the same also.
View 1 Replies View Relatedanyone know if the scanner is supported lucid 10.04.2.it is downloading updates now hp-setup does not work on it.Bus 003 Device 004: ID 03f0:8711 Hewlett-Packard scanimage -L did not find it
View 1 Replies View RelatedAfter a successful install of the MFC-J4420DW printer and scanner using Brother's install utility, I am experience severe battery drain and xsane freezes (total system lockup, requiring using CONFIG_MAGIC_SYSRQ keyboard command REISUB or hard reset).
The Brother support page and utility/drivers are found here: URl....My laptop is the HP Elitebook 8540W and I am running Debian 8 using LVM, separate partitions for /home, /var, /temp, /swap, and /. I have looked at logs in /var/log. kern.log, daemon.log, messages and dmesg, but have not found any relevant info ...
I purged all drivers/packages and tried a manual install using each deb package, but ran into some permission errors, so I purged again. I also purged xsane and reinstalled it, then did a complete printer reinstall using the brother Driver Install Tool.The tool works great, full functionality for the MFC-J4420DW. But I know I can't live with the power drain, and I would really prefer to use Gimp and the xsane plugin rather than simple scan ..
In FC11 i686, I notice that after yum install xsane xsane -v reports a version of xsane that is compiled without Gimp support. Is there a special name for the xsane package that does have Gimp support?
View 2 Replies View RelatedI've got a SCSI scanner that is being detected by the kernel on Fedora 14, but XSane does not see it. If I run "sane-find-scanner" it says that noSCSI or USB scanners are found.The scanner is a Cacham Splendeur 3024, model VM3552. I believe this scanner is the same as the Relisys Scorpio VM3552. In /var/log/messages, the following entries show up as soon as the scanner is warmed up:
Code:
Mar 11 13:34:45 dt kernel: [22595.116042] usb 4-2: new full speed USB device using uhci_hcd and address 41
[code]...