Fedora :: Rpmfusion Nvidia Driver Results In Unusable Display?
Feb 14, 2010
I would prefer to be able to use the rpmfusion nvidia driver instead of the closed driver but when I try it, KDE4 runs fine for a while but then the whole display starts blinking and the cpu % goes to 99% for XMy PC is Fedora 12 x86_64, the video card is a XFX 8800GT[URL]1) installed the kmod-nvidia-190.53-1.fc12.1.x86_64 and dependencies2) blocked nouveau with rdblacklist=nouveau in grub.conf, 3) Ran: setsebool -P allow_execstack on4) fixed the xorg.conf (I had to move my old xorg.conf out of the way and merged my DontZap option back in)
5) rebootedI did not yum remove the nouveau driver,.... didn't seem necessary.My desktop will run for a while but inevitably starts flashing uncontrollably. I can't even ssh to it to run init 3 to kill X (I can ssh to it but for some reason I can't su to root to kill X).
The driver has crashed X and before I had a chance to find RPMfusion instructions on dealing with initrd, I removed the package just to keep X running.Uninstalling the package does not restore kernel and Xorg operation. I am still in VESA mode.Although they claim they don't put stuff in non-standard places and use RPM, still there is something left over, as nuoveau driver no longer loads.Now that system configuration is all over the place, it is not clear what they actually changed or replaced.
I am using an Nvidia GeForce FX5200 card and nvidia hasn't released a driver that seems to work with it in Fedora 13 yet.. However, I decided to do an install of F13 and use the nouveau drivers until Nvidia updates their drivers, however, the nouveau drivers don't work worth a crap with my card I did a fresh install and then ran a yum update. What I am seeing is after a few minutes, all the icons disappear, no fonts, and nouveau starts throwing errors to my message log. Here are the messages I get:
NVidia FX5200: nvidia-glx-173xxx The problem is that, when I install it, upon rebooting, I get a black screen with one blinking underscore at the top left corner. I somehow managed to get into the console and .. there's something wrong with the video card driver ( no way I could catch it into a picture ).
This was the exact reason why my Fedora CD was laying on the corner for months - I remember having this issue earlier as well.
Is there a way to fix it or at least, recover from a broken video card driver ?
I have just upgraded to Fedora 13, and am trying to use the experimental Nvidia driver to enable Compiz desktop effects. The driver appears to be working correctly, but when I enable desktop effects, my text/icons/option menus are inverted (mirrored on both x and y axis's). Can anyone help me solve this issue? am i going to have to go to the proprietary Nvidia graphics driver?
After upgrading from Fedora 13 to 14 via preupgrade (works well), the nvidia drivers for my "nVidia Corporation GT218 [NVS 3100M] (rev a2)" (it's a ThinkPad T410S) work - including 3D, but every thing paints slowly. The Desktop Effects work, but everything visual (menus painting, dragging windows, etc.) are all noticeably slow (and worked fine in F13).
Update - apparently this issue is related to the GTK theme in use. The default (Fedora, or Clearlooks, or a few others) results in this slow behaviour. Other themes, like Nodoka and a few others perform fine.
The actual nvidia driver version (260.1912) does not work for my laptop (a Sony Vaio F11 series type, see bottom of page [URL]), I would like to install an older version (e.g. 256.53). Up to now, I cannot figure out how to tell yum to pick up an older version. Is there a way to do this (because kmod-nvidia is a meta package, there may be problems?), or do I have to install 256.53 manually (using the installer provided by nvidia)?
Can do nothing with the PC. New install of 10.04 and was prompted to install Nvidia driver. Did so. Rebooted, now have nothing except a thin line at top of screen. How can I remove this driver when I see nothing?
when RPMfusion will have the ATI catalyst driver for Fdedora 14 in its repo? If it is going to take a log time then I might just install it from ATI's site, but I'd rather not go through all the trouble if I don't have to.
I am wondering if there is someone who have succeeded in installing the driver for nVidia GT 330M from RPMFusion in Fedora 13.
I followed the instructions here [url], namely,
1. recreate the initrd manually
2.yum install kmod-nvidia-PAE
It didn't work. I also tried the method mentioned at the section 'Troubleshooting', but it did not either.
The trouble I encountered after rebooting is : The progress bar changed from an icon at the center to three lines at bottom. After the three lines reached at the end, the whole screen just went to blank.
I am guessing that the three lines, instead of the icon, only shows if your video card is not so powerful. And In my case, the reason could be the driver didn't work properly.
I'm installing x86_64 F14 on my Lenovo T61p, but I'm missing the i686 xorg-x11-drv-nvidia-173xx-libs in rpmfusion. Am I the only one or Is there a reason?
Edit: wine 32bit and Google Earth for example need them....
I have a problem with getting the picture to display properly on my HDTV. Using the regular driver (whichever that is) the picture displays flawlessly, but when I'm using the NVIDIA driver it displays really weird. URL...As you can see the top and the right of the picture is missing, and there is a large black bar to the left of it.Since it only does this with the NVIDIA driver I guess the driver is at fault here. The graphics card is a 8400GS and I'm running Xubuntu 10.10. The HDTV has a native resolution of 1366x768, and I've connected to it using HDMI.
I have tried messing around with overscan compensation in nvidia-settings, but it didn't help much.What can I do to fix this?
This morning, I authorized an update as almost every day. I saw that the nvidia driver was on the list but in recent years, I no longer fear these driver updates since everything usually works well...
Except that this time, no! I turn on my pc this afternoon and more 3d effects. I run "Nvidia X Server Settings" which tells me I do not use the nvidia driver and must run as root the command "nvidia-xconfig," what I do. I restart X and no display at all, only the prompt in text mode!
Im running Ubuntu 10.10 on an Nvidia ION gpu. I've installed the latest driver using the built in driver tool and by downloading from nvidia. Both times this has been the result at every resolution:[URL]
I've manually installed the latest NVIDIA display drivers from the website (newer than the restricted driver package that came with 9.10). When there is a new Linux kernel, or a newer Ubuntu version, will I need to uninstall that driver before upgrading? Will having this driver cause any special installation issues during upgrade (such as the need to reinstall the driver after upgrading)? I am using 9.10 through Wubi.
Using squeeze with a GeForce4 MX 440 video card (NVIDIA) I have a monitor (4/3 aspect ratio, 1024x768 usually), and a TV connected via S-video After installing the NVIDIA driver using the NVIDIA binaries I managed to have a cloned twin screen configuration working.
However, the monitor is (wrongly) detected as having size 1824x768 (aspect ratio is widescreen) Using system monitor, I can set the correct size, but only for one session; besides, the login screen too is messed up the xorg.conf file seems right: proper resolution modes are set; xorg.0.log too
I went back to Suse 11.2, it comes with the 'nv' driver for my NVIDIA Quadro2 Pro (64 MB) and I'm getting some slow performance on browser display and sometimes video playing. Not always, I recently saw a 2 hr long movie on Blue Ray resolution, so the problem is not hardware, it's software. I saw several links here on how to install other drivers and a 1-click install link on this page but my question is, since this is an old card... which driver is the best for this card ?
I've just installed BitDefender on my 10.04 netbook, updated and activated it, completed a scan, and found Backdoor.Generic.284566 The thing is, it won't let me delete/quarantine the nasty. BitDefender does give me a warning about my screen resolution being too low (800x600), i believe this may be the problem. The option buttons are not visible on the screen, therefore I cannot use the program properly.(i tried the max resolution 1024x600, but to no avail )
It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.
I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.
I have a rather odd problem with a machine. Up until the user logs in everything is fine, but as soon as they log in the display breaks up rendering the computer unusable. Booting from CD is ok, but the monitor is not detected.
Similar to the way Deskbar can display Beagle results live, can it do the same for Tracker? I hate having to put open the Tracker window every time I have to do a search.
boots fine if an external monitor is plugged in, otherwise the laptop screen just flashes white till it dies and reboots. lsmod says nouveau is loaded, however it lets me rmmod it as though its not in use. rmmod on the nvidia mod says it is in use. nvidia settings can change the resolution of the external monitor
used yum to install and built from scratch, both have the same result. reason i want to get rid of nouveau is because it detects my laptop resolution as larger than it is and even if i lower the resolution it still stretches it further than the boundries of the screen. without the nvidia driver my laptop display is recognised correctly aside from size issues.
Enabling the nvidia driver / etc / rc.d / init.d / functions line 526 1484 Segmentation fault "$@" [FAILED]
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
I had a computer running a NVIDA Quadro NVS 450 with 4 screens on Fedora 14 and it worked fine. I make a new install with Fedora 15 and I am now not able any more running more as one screen with Fedora 15. I am running now on run level 3 and when I configure the file /etc/X11/xorg.conf for one screen, Gnome starts correctly. When I change to two screens, and runs "startx", Gnome 3 starts and displays only the background picture without any manager. The file /var/log/Xorg.0.log shows no errors.
How do I determine what graphics card I am using in Linux? In windows it's no problem, but I don't know how to determine such things as a) what hardware am I using? and b) what driver am I using? After determining which hardware my display is using, what is the best way to manage the drivers to ensure i'm using the most up to date version?
I'm new to linux. I'm using fedora 13, 64 bit, AMD athlon II processor. I tried to install ATI Catalyst Display Driver for linux but its giving following message
ATI Technologies Linux Driver Installer/Packager which: no XFree86 in (/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) Error: ./default_policy.sh does not support version default:v286_64:lib::none:2.6.33.5-124.fc13.x86_64:; make sure that the version is being correctly set by --iscurrentdistro Removing temporary directory: fglrx-install.tcXvmo
