Fedora Hardware :: Display Freezes With Gnome 3 Nd NVIDIA Multiheads
Jun 7, 2011
I had a computer running a NVIDA Quadro NVS 450 with 4 screens on Fedora 14 and it worked fine. I make a new install with Fedora 15 and I am now not able any more running more as one screen with Fedora 15. I am running now on run level 3 and when I configure the file /etc/X11/xorg.conf for one screen, Gnome starts correctly. When I change to two screens, and runs "startx", Gnome 3 starts and displays only the background picture without any manager. The file /var/log/Xorg.0.log shows no errors.
View 3 Replies
ADVERTISEMENT
Jan 4, 2010
Is it possible to have gnome's display settings recognise higher refresh rates than 56hz, as my nvidia is set to 85hz, but gnome display still thinks its 56hz, and I believe this is causing many programs I'm using to refresh at 56hz. Compiz works beautifully after overriding the refresh rate inside it, as it too thought I was using 56hz instead of 85 but many games aswell as CairoDock as jerky, which makes me think it is a refresh issue.
How can I make gnome know I'm using 85hz?
View 5 Replies
View Related
Jun 26, 2011
Lately (F14 and F15), Nvidia's drivers have been making my system freeze unexpectedly when running X. The only work around I have is reverting to an older driver (173.14.30). Although no freezes occur when using the older one, I need the latest one to run a few games sometimes. The odd thing is that when running these games within Wine while having the latest driver installed prevents the system from its usual freeze. I'd just like to solve this problem so I don't have to consistently revert back and forth from the two. I have a Nvidia Geforce 8800m gts and I am running F15 x86_64.
View 14 Replies
View Related
Jun 1, 2011
I just upgraded from F14 to F15. My gnome3 freezes everytime I open an application. I am new to linux.
View 7 Replies
View Related
Jun 16, 2011
Firefox 4 becomes completely unresponsive for about 5 seconds. It seems to be happening mostly but not exclusively when switching tabs. At first I thought the problem was flash related but I was wrong, it happens regardless of the pages contents. Also, the problem seems to be more frequent as more tabs are open.It's interesting that it happens only on my computer at work (Intel Q33) but not at home (NVidia GTX 570). Both computers run Fedora 15 with Gnome 3 (HW accelerated). I also tried starting in fallback mode but the problem remained.
View 9 Replies
View Related
May 26, 2010
I've read some past issues with this and was wondering if anyone else has issues with F12 / F13.
When I logout of gnome or kde on a fresh install of Fedora 13 the panels disapear but I never receive the log on window. I cannot switch to command either the screen is locked completely.
I havn't run updates or anything, the install is nearly out of box except for the installation of kde.. The issue existed before I installed kde, I was hoping it didn't have this issue lol. fat chance of that..
Anyone aware of any fix's? Or what the issue is?
View 1 Replies
View Related
Jun 9, 2010
boots fine if an external monitor is plugged in, otherwise the laptop screen just flashes white till it dies and reboots. lsmod says nouveau is loaded, however it lets me rmmod it as though its not in use. rmmod on the nvidia mod says it is in use. nvidia settings can change the resolution of the external monitor
used yum to install and built from scratch, both have the same result. reason i want to get rid of nouveau is because it detects my laptop resolution as larger than it is and even if i lower the resolution it still stretches it further than the boundries of the screen. without the nvidia driver my laptop display is recognised correctly aside from size issues.
Enabling the nvidia driver / etc / rc.d / init.d / functions line 526 1484 Segmentation fault "$@"
[FAILED]
^^ that appears during boot.
View 1 Replies
View Related
Jun 5, 2010
I have just upgraded to Fedora 13, and am trying to use the experimental Nvidia driver to enable Compiz desktop effects. The driver appears to be working correctly, but when I enable desktop effects, my text/icons/option menus are inverted (mirrored on both x and y axis's). Can anyone help me solve this issue? am i going to have to go to the proprietary Nvidia graphics driver?
View 8 Replies
View Related
Jun 3, 2011
who is having issues with lockups check their /var/log/messages for this
May 28 11:41:21 shayne dbus: [system] Activating via systemd: service
name='org.bluez' unit='dbus-org.bluez.service'
May 28 11:41:21 shayne dbus: [system] Activation via systemd failed for unit
'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such
file or directory. See system logs and 'systemctl status' for details.
May 28 11:41:21 shayne dbus: [system] Activating via systemd: service
name='org.bluez' unit='dbus-org.bluez.service'
[Code]...
View 2 Replies
View Related
Feb 14, 2010
I would prefer to be able to use the rpmfusion nvidia driver instead of the closed driver but when I try it, KDE4 runs fine for a while but then the whole display starts blinking and the cpu % goes to 99% for XMy PC is Fedora 12 x86_64, the video card is a XFX 8800GT[URL]1) installed the kmod-nvidia-190.53-1.fc12.1.x86_64 and dependencies2) blocked nouveau with rdblacklist=nouveau in grub.conf, 3) Ran: setsebool -P allow_execstack on4) fixed the xorg.conf (I had to move my old xorg.conf out of the way and merged my DontZap option back in)
5) rebootedI did not yum remove the nouveau driver,.... didn't seem necessary.My desktop will run for a while but inevitably starts flashing uncontrollably. I can't even ssh to it to run init 3 to kill X (I can ssh to it but for some reason I can't su to root to kill X).
View 4 Replies
View Related
Sep 24, 2010
I have no display after attempting nvidia driver install and doing telinit 3
On hitting F2 I get these errors -
Code:
Is there anyway to boot in safe mode. I boot Fedora with GRUB2 and there isnt any failsafe entry for it. I have blacklisted nv driver already.
View 2 Replies
View Related
Jan 3, 2010
Just installed Fedora 12 stable release without checking office/productivity, server, or developer "package options". Running Gnome.Used yum to get Amarok on here, and it freezes almost immediately every time I try to open it. The splash shows, a program shows up on the window-manager panel labeled "KDED Glob..." and the system freezes. Mouse, keyboard, all unresponsive. I had FC12 Beta on this exact system and Amarok worked fine. Noting that KDED Glob is probably part of KDE, and that I did not install KDE, I thought maybe Amarok depends on a KDE component that the repo did not pick up as a dependency. Tried to install as much of the mainstream KDE components as I could, with no change.
View 4 Replies
View Related
Aug 12, 2010
I am running fedora Fedora 2.6.31.5-127.fc12.i686 - works fine, but it puts my display adapter in old fashoned simple vga mode.
DISTRIBTION
Fedora 2.6.31.5-127.fc12.i686
Mysql 5.1.47
Apache 2.2.15
CONFIGURATION
1.25 ghz AMD athlon
NVIDIA RIVA TNT display adapter
ECS K7S5a board / chipset
AMD BIOS 07.00T
512 mb main mem
128 kb primary cache
256 2ndary cache
66 mhz bus clock
I use the bios to dual boot between two disks, (1) this op sys and (2)win98se - where I have a driver that fully supports the nvidia.
The disadvantage to my current situation is that there are some programs - eg Evolution - that assume I can see more than you see with this setup - eg the buttons at the bottom of the screen do not appear and i have to do a trial and error tabbing to get what i want. I just downloaded openoffice and i see that it wants 1000x2000 or so. Thus I wont even try to install it unless i can resolve the adapter thing.
I'm very happy with this fedora - use it for software development. But as I become more fond of it, I would like to use it instead of windows - which I can't unless i can see the whole screen
At one point - in response to a suggestion that I download security updates - I did so and got 2.6.32.12-115.fc12.i686. It was incompatible with my config - put up a screen that looked like a tv test pattern and went into a loop. So I went back to 2.6.31.5-127.fc12.i686.
View 8 Replies
View Related
Mar 23, 2010
I am running FC12 64bit on my desktop and the problem is that after I enter my credentials at graphicall login screen (Gnome) the computer hungs i cannot moove the mouse, CTRL+ALT+DEL won't work the Caps and Scroll lock on my keboard are blinking. Nothing responds. I am absolutelly cluless. Untill yesterday i was using FC12 i686 and never had this problem, but i got 4GB ram so in order to get those fully i installed the 64bit version. On clean install of the 64bit ver everything went fine, but i updated the system and followed theese instroctions [LINK]http://www.howtoforge.com/the-perfect-desktop-fedora-12-i686-gnome[/LINK] and that's all
View 13 Replies
View Related
Mar 23, 2010
I am running FC12 64bit on my desktop and the problem is that after I enter my credentials at graphicall login screen (Gnome) the computer hungs i cannot moove the mouse, CTRL+ALT+DEL won't work the Caps and Scroll lock on my keboard are blinking. Nothing responds. I am absolutelly cluless. Untill yesterday i was using FC12 i686 and never had this problem, but i got 4GB ram so in order to get those fully i installed the 64bit version. On clean install of the 64bit ver everything went fine, but i updated the system and followed theese instroctions [URL] and that's all.
Before i atempt to login i can ssh to the machine.
View 7 Replies
View Related
Jun 8, 2010
Gnome used to have a display manager that you could customize your login screen with. I would like to customize my login screen.
#gdmsetup
Nothing found
#gdm setup
[code]....
View 2 Replies
View Related
Oct 24, 2009
Why does Fedora 11 Gnome have two places to set display attributes, one under System -> Preferences -> Display and the other under System -> Administration -> Display?
View 9 Replies
View Related
Apr 16, 2011
I have a fresh install of OpenSUSE 11.4 64bit and I have installed the AMD Display drivers for my Radeon HD 5970. Everything seems to be working quite well. I have a multiple monitor setup (1280x1024 monitor and a 1920x1080 monitor).
I have my primary display set to 1920x1080, however when I try to enable the second display, I get a CRTC error that the display is over the maximum (1920x1920). If I enable both monitors at lower resolutions, there is no problem.
I have done a fair bit of reading and have been unable to determine where this maximum is set, or how to change it. I'd like to be able to run both monitors at their native resolutions.
View 3 Replies
View Related
Nov 4, 2010
which program of KDE or of Gnome of F14 can display hardware information?
View 4 Replies
View Related
Jun 1, 2011
Is there a way to display the seconds on the clock of the GNOME status bar?
View 3 Replies
View Related
Aug 2, 2011
Is there a way for the time at the top of the screen to display seconds as well as the date ?
My clock seems to be about :40 seconds off... before i upgraded from f-13 i had my time controlled by ntp(how to verify ntp is enabled) ? even with network time = yes, it seems to lag a little.
I figured out the network time. it is under a whole separate menu for some reason.
Is there a way to get weather/ temperature like in classic gnome ?
Rite now my clock reads: tue 3:50 pm...Is there a way i can make it read: tue, aug 20, 2011 3:50:45 pm
View 5 Replies
View Related
Jun 23, 2011
Just installed F15, was everything fine, but then gnome got away, from terminal I have<gnome-session:1951): Warning can't start display message.Before that I put in config file one extra line to start tint2 like <sleep 3 && tint2.Not sure was it the reason?
View 4 Replies
View Related
Jun 2, 2011
Anyone have a multi-card, multidisplay setup working with gnome 3 and Fedora 15? I have two nvidia 9500GT cards driving 4 monitors (2 per card) using the proprietary nvidia drivers (270.41.19) The setup had been working fine with the previous version of Gnome and Fedora 14. I was using xinerama to have one large desktop spanning 4 screens. No problems until I upgraded. KDE works after configuring using nvidia-settings, however gnome 3 is not useable. I get two screens black (but with mouse pointers when I move the mouse) and the right two screens with the background but the activities corner in the right hand side of the right most screen, rendering it useless.
View 10 Replies
View Related
Jun 1, 2009
I upgraded to FC10 from FC8 and my Gnome-panel no longer spans both screens in my dual monitor configuration. This worked fine in FC8, and I can't seem to figure out how to make this config work in FC10.
I've tried Xinerama and Twinview, and various configurations in xorg.conf, and cannot seem to make it happen.
How to make both my panels (top and bottom) go across both screens?
View 2 Replies
View Related
Jul 12, 2011
I've seen a lot of posts related to problems with GNOME 3 shell and nvidia drivers but I have yet to find anything that seems to fix my problem. At this point, the laptop, a Dell D850, boots just fine all the way to the gdm login screen. When I log in, the background and menus initialize and the mouse can be moved around, but nothing works---I can't click on anything, Alt-F1 does nothing, and I have to switch to a VT and shut-down X. I've uninstalled all things nvidia and now I have a working laptop, so long as I use Classic with Compiz.
I upgraded two other hosts, but both had ATI graphics cards; they worked without a hitch. I'm regretting having decided to upgrade this laptop
View 2 Replies
View Related
May 6, 2010
I'm hoping someone can point me in the right direction. I've tried Google searching and searching this forum, but haven't found something similar to my issue. Yesterday, I installed 10.04 off of the live CD onto my Toshiba Satellite A45-S250 laptop (P4 2.8, 1GB RAM).
The main problem is: -if the computer sits idle for more than about 5 minutes, the display will freeze. Image stays on screen, but the computer appears to be non responsive to all input.
-I thought it was a screen saver at first, but it happens even with the screen saver disabled. -I can still SSH into the machine from my desktop computer. I get a normal prompt, and it seems to be working fine from the shell. This is how I have been restarting or shutting down the machine after a freeze.
Secondary issues (that may help diagnose the problem):Even when this laptop appears to be functioning normally (pre-freeze), I cannot switch to any virtual terminals. Well, I can, but when I get there, something is not right. The text does not display properly. It sort of strobes on and off near the top right hand of the screen. -On shutdown, I get a weird colorful displays of what I can best describe as "static". The closing splash screen may just blink on for a second. Other than that the screen stays black until the machine shuts down.
-I've run versions of Ubuntu going back to Breezy on this machine, mostly without issue, and it has been a full time Ubuntu machine since the release of 8.04. These symptoms all appear to be related to video / display.
View 9 Replies
View Related
Nov 10, 2010
I have fresh installation of Ubuntu server upgraded with apt-get dist-upgrade and with XFCE4 installed on my notebook. The problem is whenever I type startxfc, startx or X, the NTB freezes, CRT display connected to docking station/port replicator turns off, LCD in NTB gets black. The system does not respong to any signal, even the alt+sysrq ones. If I even install Xubuntu-desktop, as the X gets loaded every start, system everytime hangs after few seconds and I cannot do anything. Now I reinstalled and tried autoconfiguration with Xorg -configure. If I start the X with this configuration file, the result is still the same. Log at /var/log/X11/ seems to be blank.
Any ideas? Should i try to get drivers for my video card? I thought this is not necessary, the X server should start without anything, even only with basic resolution settings. As I looked, the video card chipset (Intel 82852/82855) is detected in my /root/xorg.conf.new file.
View 1 Replies
View Related
Oct 13, 2010
I made a fresh installation of Ubuntu 10.10 (64 bit) on a Sony PCG-81112M, the graphic cards is identified by lspci as "nVidia Corporation GT216 [GeForce FT 330M]". Quite frequently everything but the mouse pointer freezed on the screen, I found no way to recover from these situations but to restart the computer using the power button.
I decided to install the proprietary driver (as this is the recommended driver, I was confident this would solve the problem). As a consequence the system now hangs on boot after showing the Ubuntu 10.10 inial logo/text. I could start in recovery mode, but I'm not sure to which driver I should try to change to. I really need no fancy 3d stuff, just a robust computer to which I can attach and detach an external screen.
View 9 Replies
View Related
Jan 4, 2010
New install of FC12 and after logging into the KDE desktop then going back to Gnome, the Desktop Config File for KDE shows on the Gnome desktop. I ran gconf-editor and I can see the file but no option to not display in Nautilus. Is there an easy way to not display the file on the Gnome desktop without messing up the KDE config file?
View 2 Replies
View Related
Jun 27, 2011
We are having a cluster with couple of disk servers, compute nodes and a head node. Disk server is nfs mounted on all the compute and head nodes.
The problem is that if any of the disk servers hangs, it freezes rest of the cluster too which is dangerous. Ideally, cluster should not care about the hanged server and run without any problem except files from that server is not visible.
Is there any way I could avoid the problem of freezing cluster because of one hanged server?
View 1 Replies
View Related
