Ubuntu Multimedia :: Driver Showed The Nvidia 173 Driver And The Other One Showed "current" Nvidia Driver
Apr 22, 2010
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
View 3 Replies
ADVERTISEMENT
Jul 7, 2011
Currently using Nvidia driver version 195.36.31, it's the version that works with Nvidia-kernel-dkms, would updating Nvidia driver to the current 275.09.07 driver version break my setup?
View 3 Replies
View Related
Apr 29, 2011
I just installed Natty. Installed nvidia-current via synaptic. Then uninstalled nouveau via synaptic also. Back to Unity desktop, I chose Additional Drivers and activated "nvidia-current". However, after reboot, the info window says this driver is activated but not in use.
View 9 Replies
View Related
Aug 8, 2010
Can do nothing with the PC. New install of 10.04 and was prompted to install Nvidia driver. Did so. Rebooted, now have nothing except a thin line at top of screen. How can I remove this driver when I see nothing?
View 2 Replies
View Related
Feb 8, 2011
my laptop is ASUS U41JF with Intel Core i3-380M and nVIDIA GeForce GT 425M, everything on my Slackware64-current is fine except the video driver.I have tried both ways:1. Packages from Slackbuild(260.19.29)2. Driver from nvidia offical website(260.19.36)Both methods fails because the screen turns black when I set nvidia driver in xorg.conf ans start X. The laptop even stops responding with the second method.The followings are my xorg.conf and log of XorgQuote:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
[code]...
View 11 Replies
View Related
May 1, 2011
After a failed upgrade from 10.10, I went for a complete reinstall. What I'm seeing is that when I install the nvidia-current driver x / gdm doesn't seem to load. I get a blank screen for a bit, then it drops to the last lines in the terminal from loading up. I can ctr-alt-f1 to get to the first tty.
What I'm seeing in my .xsession-errors file is:
Code:
Xlib: extension "GLX" missing on display ":1".
What I'm seeing in my Xorg.0.log is
Code:
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA GPU at PCI:4:0:0. Please
[17.511] (EE) NVIDIA(GPU-1): check your system's kernel log for additional error
[17.511] (EE) NVIDIA(GPU-1): messages and refer to Chapter 8: Common Problems in the
[17.511] (EE) NVIDIA(GPU-1): README for additional information.
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[17.511]
Backtrace:
[17.511] 0: /usr/bin/X (xorg_backtrace+0x3b) [0x80eab1b]
[17.511] 1: /usr/bin/X (0x8048000+0x5fac8) [0x80a7ac8]
[17.511] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x44940c]
[17.511] Segmentation fault at address (nil)
[17.511]
Caught signal 11 (Segmentation fault). Server aborting
[17.511]
I'm running on an nvidia 295 gtx. On 10.10 with a completed updated system I saw no issues.
View 5 Replies
View Related
Jun 13, 2011
There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.
Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.
View 9 Replies
View Related
Mar 12, 2011
How do I check if I'm using the Nouveu driver or the Nvidia Binary driver? I thought things were running nicely with the free driver because I had compositing working on my dismal graphics card... But scrolling in firefox is slow/laggy so I tried installing the binary driver with 1click install. But I restarted and still have the same problem. I think I might still be using the nouveu driver? Actually, scratch that last sentence. I just did lspci -v and got this output:
Code:
01:00.0 VGA compatible controller: nVidia Corporation NV37GL [Quadro FX 330/GeForce PCX 5300] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device 310e
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
[Code]...
View 2 Replies
View Related
Mar 5, 2011
install debian 6 on my pc and have big problem with videoadapter driver i cannot install driver i dowload driver from nvidia do something in google but nothing! palit gtx 460 linux debian 6 x64.
View 3 Replies
View Related
Aug 4, 2010
I am fairly new to Linux. My machine is running Debian 5.0.5 with gcc version 4.3. When I try to install the Nvidia QuadroFX 3450 driver I got from the Nvidia web site I get an error saying:
"The compiler used to compile the kernel (gcc 4.1) does not exactly match the current compiler (gcc 4.3)....."
Does this mean my gcc version is too new for the driver? if so, how do I roll back to a older version?
View 8 Replies
View Related
Nov 30, 2010
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
View 3 Replies
View Related
Aug 4, 2010
I am trying to update my Nvidia MX 480 GFX card. Today I figured out how to run the program as a root:
Code:
I run that and then this is what it gives me.
Where I got the link to download the nvidia driver from: [url]
View 9 Replies
View Related
Aug 8, 2010
The freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.
System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,
View 6 Replies
View Related
Jul 29, 2010
Does somebody know if the NVIDIA driver from NVIDIA repository supports Cuda?
View 2 Replies
View Related
Feb 5, 2009
I am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.
Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.
I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.
Here are my specs:
CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W
It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.
I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.
View 1 Replies
View Related
Mar 20, 2010
I've installed 9.10 and wish to use the nvidia-glx-173 driver as recommended by jockey. Using the jocky GUI just hangs at 100% cpu, a significant portion of which is the cdrom process; I've tried installing the package directly in aptitude and get the error:
Code:
Media Change: Please insert the disc labeled 'Ubuntu 9.10 _Karmic Koala_ - Release i386 (20091028.5)' in the drive '/cdrom/' and press [Enter]. The installation disc (standard x86 disk from shipit) doesn't satisfy it. How do I get aptitude to just download it from online repositories?
View 1 Replies
View Related
May 19, 2010
I have a Zotac IONITX-F-E motherboard (Intel Atom Dual Core 1.6 GHz + Nvidia ION) -based box with Ubuntu 10.04 64-bit installed. My goal is to play back 1080p video. I read somewhere that the nouveau driver that installs by default with ubuntu 10.04 does not support VDPAU. So, my first step is to install the nVidia proprietary driver. I tried following a half-dozen different guides for doing this, none of which worked. Let's take this one for example: [URL] I purge. I reboot. I run the Nvidia installer (NVIDIA-Linux-x86_64-195.36.24-pkg2.run). I get:
Code: ERROR: Unable to create '/usr/lib/nvidia-current/libGL.so.195.36.15' for copying (no such file or directory). So, I run: Code: sudo apt-get install nvidia-glx-185 nvidia-185-modaliases I try the nvidia installer again. It works. I reboot. I get a message saying that ubuntu is running in low graphics mode, because loading the nvidia kernel module failed. I check /var/log/messages and see: Code: API mismatch: the client has version 195.36.24 but the kernel module has version 195.36.15. I take a Tylenol and here I am.
View 9 Replies
View Related
May 28, 2010
I just performed a clean install of Kubuntu Lucid earlier this week after deciding it was time to upgrade from Hardy. Pretty much everything worked, until I attempted to install the proprietary NVIDIA driver.
OS details: Kubuntu 10.04 x64 Kernel 2.6.32.22.What happened when I tried to install the proprietary nvidia-current package was simply that it didn't work. I could open the nvidia utility, it would say the driver was not in use. Attempts to force the issue by running nvidia-xconfig would render the X server unable to start, which gave me some quality time in a shell console with APT or restoring the xorg.conf file from backup. Trying to compile and install the driver from nvidia also wasn't working out so well.
I think the issue boiled-down to the install presumably attempting to upgrade the kernel during initial install from CD, but not doing so completely. I had all the appropriate 2.6.32.22 kernel and header packages, but GRUB was apparently still booting to the 2.6.32.21 kernel (which had no headers or anything) and not giving options to boot to the upgraded kernel.
How I fixed this was to remove all packages related to the 2.6.32.22 kernel via APT, then remove all the 2.6.32.21 kernel packages. That second operation triggered the 2.6.32.22 kernel to be reinstalled, and GRUB to be configured correctly to boot to it. At that point, I reinstalled nvidia-current, and it worked. I tried this after determining I was on the 2.6.32.21 kernel, and had no option to boot to the 2.6.32.22 one.
Your mileage may vary. In retrospect, I probably could've fixed it by fixing GRUB to boot to the current kernel. This appears to be a consistent issue, as I reinstalled at one point, just to start over, and went through the same thing again.
I suspect the driver I obtained from the nvidia website and patched (due to issues it has with recent kernels) might work now that I'm booting to the correct kernel with headers, but I think I'll save that for another time since nvidia-current is working great for me at the moment.
View 4 Replies
View Related
Jun 16, 2010
I wish to update my nvidia driver (I was running 195.36.24 and I want to update to 195.36.31). I followed all the instructions on this thread (http://ubuntuforums.org/showthread.php?t=1467074) and everything went well until this part:
Code:
sudo sh blahblah.run
The error I get in the terminal reads: You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at [URL]...I have no idea how to exit X as it's not in my system processes.I have updated my nvidia driver in the past but have never encountered this problem. I'm running Ubuntu 10.04 on a Dell XPS M1530 if that matters.
View 2 Replies
View Related
Oct 30, 2010
[URL]. I now have both monitor working and noticed my drivers are not current. I have the older ones installed. The 260.19.06 one. I installed via the suggested restricted driver utility in ubuntu 10.10. I don't have full use of the graphics and would like to install the latest driver.
Question:
1. Do I uninstall nouvea and nv drivers (still installed)
2. Do I uninstall the current nvidia driver, then do a manual install of the latest driver from nvidia?
View 5 Replies
View Related
Nov 23, 2010
Installing Mythbuntu 10.10, which I finally got installed properly. At first I installed the open-source video drivers just to make sure the installation worked, then I installed the "version current" proprietary drivers using the graphics drivers manager...tool...thing. However, when I restarted the computer, it has a text-mode splash screen and I stay in the first virtual terminal.
If I try to go to the GUI "terminal" [Ctrl-Alt-F7], it appears to be partway through some kind of check:
Code:
I ran sudo dpkg-reconfigure xserver-xorg to try to get back to the open-source drivers, but it didn't give any text output and went straight to the next line of command prompt, when I restarted it did the exact same thing. Any tips for at least getting back to the open drivers? I'd like to not have to reinstall again (I'm dual-booting WinXP,). The card in question is a GeForce 6200 AGP.
View 6 Replies
View Related
Jul 11, 2011
My ubuntu 10.04 64 bit system uses the nvidia driver 195.36.24. I do not remember installing it, but I must have installed it using "official channels".In fact, the package nvidia-current is installed on my system.What is the cleanest way to upgrade to a later version of the nvidia driver? I need to do this in order to run a CUDA 4.0 enabled application. Minimum driver version I need: 270.41. I'm willing to ditch Ubuntu 10.04 if necessary.
View 4 Replies
View Related
Feb 20, 2016
Debian Jessie kernel 3.16.0 AMD64. Legacy GeForce 66oo GT video card.
I just re-installed Jessie via Debian non-free DVD. When I run apt-get update && apt-get upgrade, the screen says to the effect :
"Before Nouveau can be used, must remove Nvidia config from xorg.conf and xorg.conf.d"
Is there a simple way to keep Nouveau and blacklist or prevent Nvidia driver from being automatically installed in the first place?
View 6 Replies
View Related
Feb 10, 2010
Running debian sid. I have the Debian 2.6.32-trunk kernel installed and the liquorix kernel.
I use sgfxi to install the nvidia driver. Normally sgfxi allegedly strips out all prior nvidia, using both the nvidia uninstaller and purging any debian nvidia packages.
Today when I updated the liquorix kernel and reinstalled the drivers for the new kernel, it was still installed in the old kernel. Normally it is just installed in one kernel.
Graphics:
Card nVidia G96 [GeForce 9400 GT] X.Org 1.7.4 Res: 1280x1024@50.0hz
GLX Renderer GeForce 9400 GT/PCI/SSE2 GLX Version 3.2.0 NVIDIA 190.53 Direct Rendering Yes
I guess the questions is, is this a new feature or just some weird glitch? Also I only get the nvidia splash on the Debian kernel and not on the liquorix kernel.
View 4 Replies
View Related
Feb 3, 2010
I have installed the recommended driver for my nvidia card (185), and after much fiddling finally got my config file to stick and boot correctly, however I can't see the output of the media player or the DVD player. The files play because I can hear them, but I don't see any output. I have moved the depth to 16 bit, but I still don't get anything.
View 3 Replies
View Related
May 20, 2010
I want to install new nvidia driver for geforce 8600 on ubuntu 10.04 but I recive the following error: The binuteals is not installed on the system.
View 1 Replies
View Related
Jun 6, 2010
After having some trouble with Intel graphics I decided to pick up a PCI Nvidia graphics card. Now I am wondering what driver to use. Is the open source drive good enough to use or should I install the Nvidia driver? I know that things are generally easier with the default driver, especially for support on older cards, but I would like to get the best performance I can. This is for my Dad's computer, so he won't be playing any games, but if it will help with 2D and video that would be great.
The card is an Geforce FX5200 fanless card, I've heard they are well supported in Linux.The computer is a P4 Dell 3000 with Ubuntu desktop 10.04 32bit.
View 2 Replies
View Related
Sep 21, 2010
I'm using my Ubuntu 10.04 as a server, headless or with HDMI receiver/TV setup. There is a lot's of topics how to make it work headless/VNS. I found the least trouble is to make a fake VGA from old VGA cable and 3 resistors. However, when I start my Ubuntu with Fake VGA it won't switch to HDMI when I turn my Receiver/HDMI on. If I restart X it is fastest way to pick the HDMI Video/7.1 Audio up. I can do it via VNC or ssh and going to do it with 'irexec' so my wife will be able to redetect the HDMI and run XBMC with one button click of the remote.The problem is restarting X kills all my GUI apps (KTorrent, ...). Is there a way to force the video driver to restart or redetect the screens?
View 1 Replies
View Related
Oct 3, 2010
I am having problems installing the graphics driver (from the Nvidia website) for my Nvidia Vanta card on Ubuntu 10.04. I disabled X via terminal and then I ran a Virtual Console. With the virtual console I ran the chmod command and the went through the installation. It did bring up a message with something about my distro not having a pre-configured script (or something like that) and asked me if I would like to continue anyway. I choose Yes and the installation failed.
View 2 Replies
View Related
Nov 11, 2010
I upgraded to 10.10 from 10.04, and I noticed that the nvidia driver are not working all well as they did before.
Although I get the nvidia logo when X starts, the 3d part does not work well. For example using mplayer -vo gl does not work anymore. When I type glxinfo I get the x error of failed request badwindow message. More anonyingly flash will crash when going to fullscreen.
The 2d part of the drivers seem fine because xvinfo and -vo xv works fine.
View 1 Replies
View Related
