Fedora :: Nouveau Makes F13 Unusable Until Nvidia Releases Driver
Jun 18, 2010
I am using an Nvidia GeForce FX5200 card and nvidia hasn't released a driver that seems to work with it in Fedora 13 yet.. However, I decided to do an install of F13 and use the nouveau drivers until Nvidia updates their drivers, however, the nouveau drivers don't work worth a crap with my card I did a fresh install and then ran a yum update. What I am seeing is after a few minutes, all the icons disappear, no fonts, and nouveau starts throwing errors to my message log. Here are the messages I get:
[Code]...
View 2 Replies
ADVERTISEMENT
Feb 14, 2010
I would prefer to be able to use the rpmfusion nvidia driver instead of the closed driver but when I try it, KDE4 runs fine for a while but then the whole display starts blinking and the cpu % goes to 99% for XMy PC is Fedora 12 x86_64, the video card is a XFX 8800GT[URL]1) installed the kmod-nvidia-190.53-1.fc12.1.x86_64 and dependencies2) blocked nouveau with rdblacklist=nouveau in grub.conf, 3) Ran: setsebool -P allow_execstack on4) fixed the xorg.conf (I had to move my old xorg.conf out of the way and merged my DontZap option back in)
5) rebootedI did not yum remove the nouveau driver,.... didn't seem necessary.My desktop will run for a while but inevitably starts flashing uncontrollably. I can't even ssh to it to run init 3 to kill X (I can ssh to it but for some reason I can't su to root to kill X).
View 4 Replies
View Related
Nov 26, 2010
First some specs:
Fedora 13 (Goddard) 32-bit
NVIDIA GeForce GTX 260
The DVI output on my card works just fine to my monitor, which is what I've been using. I installed no drivers; it just worked. However, now I need a duplicate screen to be given via the s-video output, but it doesn't work. Nothing is being given to the tv and nothing is being detected under monitors. From what I understand, this is because I need to install the appropriate Driver.
I downloaded my driver from the nvidia website, but it won't install. it tells me I need to disable nouveau.
View 9 Replies
View Related
Apr 2, 2010
I read that the Nouveau Gallium3D driver will work with Nvidia cards in Fedora 13 (YAY!)What I was wondering is this - will the driver work in 12 or will I need to get 13?
View 14 Replies
View Related
Oct 17, 2010
I had installed my NVIDIA 9500GT driver on my fedora 13 by disabling nouveau, so should i enable it back after installing NVIDIA driver?
View 2 Replies
View Related
Jun 7, 2011
Can this be done similar to some other O/Ses so Nouveau doesn't pre-screw up the kernel for 3rd party drivers??? Would be great in F16 if we were given a choice re: wanting nouveau or not. I simply can not get F14 or F15 to work with the 270.xx drivers on recent equipment.
View 10 Replies
View Related
Apr 26, 2011
Nouveau won't go away.I done the rdblacklist in grub and blacklist in modprobe.d but it still persists.Is there something else I need to for Fedora 15?
View 7 Replies
View Related
Nov 30, 2010
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
View 3 Replies
View Related
Jun 13, 2011
There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.
Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.
View 9 Replies
View Related
Dec 17, 2010
I'm using ubuntu 10.10 with the proprietary Nvidia-driver for my graphics card. I'd like to switch to the open source Nouveau driver. What is the best way to go about this?
View 9 Replies
View Related
Aug 5, 2011
I am completely new to Linux in general, and have recently downloaded Fedora 15 KDE spin. I tried dual-booting between Windows 7 and Fedora by shrinking one of my Windows partitions (I have two, this partition not containing the Windows installation). I tried shrinking it to 30 GB less than the total space available on the partition, and after pressing continue, received an error (which I unfortunately dismissed quickly and can't remember). In the file manager, Fedora showed that my partition changed from 1.3Tb to 1.2 Tb, but I couldn't access it. Upon rebooting into Windows, I still can't access it, receiving a "format drive before use" popup and then error stating that it is possibly of a different filesystem or corrupt.
Unfortunately, I stupidly didn't backup any of my data (which I will be sure to remember to do in the future). I installed EASEUS Partition Master 8.0.1 Home Edition, which states that my drive is still of NTFS filesystem and has the total space it should. However, upon clicking "check drive," it states there are no errors and when trying to "explore files," it doesn't find any (yet it shows the correct amount of used and unused space). I then tried running TestDisk, but only allows me to check my media drive E, which is my dvd drive that has my Fedora Live CD in it (which cannot be ejected manually or through Windows, an error stating it cannot be ejected). I didn't go through with TestDisk for my DVD drive because I needed to verify the type of partition (which to my knowledge shouldn't even exist). It shows 700 something MiB / 600 something MiB. Although I have decent general knowledge about computers, I am a complete novice when it comes to doing something like this.
View 1 Replies
View Related
Oct 12, 2010
When I press the calculator key on my keyboard and the calculator comes up, I can't use my mouse anymore. I can move it but I can't click on anything. Is there a fix for this?
View 4 Replies
View Related
Apr 29, 2010
this may be asking too much (especially from leigh123, 'cause i know you're working hard), but i've lost track of the current status of the great nvidia driver vs. nouveau driver debate, and what we can hope to see in f13 in about 20 days. could you provide or point us to a layman's summary of what graphics capabilities we can expect with a "default" configuration when we bring up f13?
in particular, can we expect nouveau to provide 3-d for f13 (or in the near future)? nvidia install guides, leigh123, but despite your best efforts, the procedures seem to be getting more involved as time goes on, not less (and not noticably more reliable, either). between graphics card drivers and flash plugins fighting firefox (not to mention adobe fighting videos and hulu) it's discouraging to actually lose capabilities that were once available when upgrades are made.
View 1 Replies
View Related
Nov 6, 2010
I have a machine running FC 13 and a GeForce 210 Graphics card. I'm running the 2.6.33.3-85 kernel (if I use the newer kernels like 2.6.34.7-61, and 2.6.34.7-56, the X server won't even start; that was the subject of a different thread which didn't get answered). After a few hours, the screen is displayed in a disorganized state: each quadrant is displayed in the wrong space, and the X server won't respond to mouse movements (this isn't a screensaver). This is different from a previous problem where the X server simply hangs after an hour of so when I use GUI programs (that was also the subject of a different thread which didn't get answered). I think I'm running the Noeveau video driver, but not sure.
View 3 Replies
View Related
Jun 17, 2011
My system with kernel-2.6.35.10-74.fc14.x86_64, NVIDIA 3800 + Samsung 2233 and 3Dvision kit works fine, but upon upgrading to kernel-2.6.35.13-92.fc14.x86_64 the system won't go past the blue->white bar along the screen. The modprobe.d directory has the file blacklisting nouveau and there is the grub entry rdblacklist=nouveau, but do I need to re-run the nvidia installer. If so I think I need to reset the init level to stop X11 trying to load. and will I need to keep doing this everytime I upgrade the kernel if I have nvidia drivers installed?
Leigh123linux desired code output is below
***
abrt-addon-kerneloops-1.1.18-1.fc14.x86_64
kernel-2.6.35.10-74.fc14.x86_64
kernel-2.6.35.13-91.fc14.x86_64
[Code]....
View 2 Replies
View Related
Feb 17, 2010
I am running F12. With prior kernels - 2.6.31.9-174.fc12.i686 or before - I could simply rename the nouveau.ko driver to nouiveau.ko.bad. Then the kernel would load the nv driver instead, and everything worked great. FWIW: adding rdblacklist="nouveau" to the kernel params in grub.conf didn't seem to do anything.
On a recent update, a new kernel was added: 2.6.31.12-174.2.19.fc12.i686. I did the same rename trick as before, but this time the kernel still loaded the nouveau driver, and then X failed to load. So I had to fall back to the older kernel.
Is there a way to keep nouveau from loading with the newest kernel (ie, the one above)? And also, is there a way to keep nouveau from loading for any new kernels?
View 1 Replies
View Related
Jul 3, 2010
I have Fedora 11 installed on a system that initially had an ATI 1650 type card. I recently replaced it with a GeForce GT 220. I don't believe there was ever an xorg.conf generated or used with the ATI card. Initially, when I replaced cards and rebooted, I was able to start up KDE or GNOME but with only 2 very low resolutions available(the highest being 800x600). Next I ran Xorg -configure to generate an xorg.conf file. Everything I am seeing in this file seems to make sense. But now, when I startx all I get is a red error box being displayed by the CRT monitor with this message:
Signal Frequency is out of range
FH 30.1 kHz FV 24 Hz
Please Change Signal Timing
The only way I can get my X system back is to go into the xorg.conf file (in the Device Section) and change the driver to vesa. But I still only have 2 very low resolutions available.
View 6 Replies
View Related
Jan 25, 2011
ill try to write in english as well as i can.So, my problem is this:Fedora has Nouveau drivers installed by default, and I want to install nVidia propietary drivers.When i try to install Nvidia propietary in runlevel 3, it says that ive to deactivate or unistall Nouveau.
Ok, i do that, but the next reboot, the tty doesnt work (black screen) and i cant access runlevel 3 correctly and i cant install propietary driver. I have looked this in google and i didnt find nothing, so i ask here.
View 5 Replies
View Related
Feb 9, 2010
After updating X-Windows (via yum auto-update) I'm having a serious X-Windows problems when using the nouveau video driver. I had to switch over to the vesa driver to be able to start X-Windows. Below you find the Xorg.log file:
Code:
X.Org X Server 1.7.4.902 (1.7.5 RC 2)
Release Date: 2010-02-05
X Protocol Version 11, Revision 0
Build Operating System: x86-06 2.6.18-164.6.1.el5
Current Operating System: Linux localhost.localdomain 2.6.32.7-37.fc12.i686.PAE #1 SMP Fri Jan 29 14:37:28 UTC 2010 i686
Kernel command line: ro root=/dev/mapper/VolGroup-lv_root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=be-latin1 rhgb quiet rdblacklist=nouveau vmalloc=512MB .....
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Please consult the Fedora Project support at [URL] for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(II) NOUVEAU(0): NVLeaveVT is called.
View 3 Replies
View Related
May 27, 2010
I've noticed in many versions of Fedora is that the blue colors don't seem so right. They appear more like violet in comparison to the Nvidia proprietary driver.I've tried playing with the new color profiles in F13 but none of them fixed this particular problem
View 8 Replies
View Related
Nov 4, 2010
I have two monitors - one connected to the VGA port and the other to the DVI port. Fedora seems to be detecting both monitors (figured this out because when I rotate the desktop cube, the second screen is also seen.). However, the monitor on the DVI port is blank. This happens even if I use just one monitor with the DVI port. I cannot install the proprietary nvidia drivers because my computer hangs (has been happening since fedora 11 or 10), Is there a way to get both monitors to work with the nouveau driver?
I faced this problem in Fedora 13 as well and was hoping both screens would work out of the box in F14. Is there any way I can do this to make it work like nvidia's TwinView?
View 7 Replies
View Related
Nov 12, 2010
Fedora 13, x86_64, up to date. Trying to get nVidia Quadro NVS 140M to display on a projector the same as it does on the laptop screen, which is 1680 x 1050. I failed to do so with the nVidia driver (latest version), so I want to go back to the nouveau driver and try with xrandr. I have always used the nouveau driver with Fedora without an issue, but in my former life in Ubuntu I sometimes switched back and forth between the "nv" driver and the nVidia driver.
Doing so was trivially easy - just edit xorg.conf replacing "nv" with "nvidia" or vice-versa, then restart X. However, after installing the nVidia driver via Yumex and using the nVidia config utility, I find that now I have an xorg.conf file that is loaded with stuff I don't understand, except that at the top it says it was created by nVidia, and there are two places where it says the driver is "nvidia." I have searched and all I can find is instructions for installing the nVidia driver.
Apparently that is meant to be a one-way ticket, because I can't find any instructions for how to return to the nouveau driver. Except stuff that is over a year old, and complaints from users whose systems failed to start X. What would happen if I just replace "nvidia" with "nouveau" in the xorg.conf file and restart X? I know if it won't start X I can boot to rescue mode and re-edit xorg.conf, but I'd rather ask first and do it the right way than have to repair a broken system.
View 10 Replies
View Related
Jan 18, 2011
I installed the nvidia driver from the vendors homepage. But since it does not support regulation of brightness (and the display is that bright that I want to downlevel it), I wanted to go back to the default display driver which is the nouveau driver.So I uninstalled the nvidia driver and then I realized that I didn't make any backup of the xorg.conf file prior installing the nvidia driver. Shame on me, yeah.Now when the x-server started, it couldn't find the nvidia driver. Okay, fair as it was removed. Next to that my keyboard becomes unresponsive. That's really aching as I can not switch to a text-based console any longer.I'm able to boot into initmode 3 by editing the kernel parameters in the boatloader. I'm also able to edit the xorg.conf with vi in the shell then and start the xserver to test things by calling xinit.
I already tried to recover a bit from this situation by removing the references to the nvidia driver and replaced it with some information I could find on the nouveau homepage - but no luck so far, keyboard still freezes and login window does not appear. I could take a look into the xorg.0.log which warns me about the keyboard getting disabled but I do not really understand why. Next to that I find some other additional information. My computer experience is quite okay, but I'm somehow new to Fedora, I started half a year ago with Fedora 13 on my other laptop which worked like a breeze.
I wondered where I can find information about how to configure the xserver in the default configuration, if there is some reset functionality or so, that brings me back to installation defaults. Those worked ok for the nouveau driver. Unfourtionatly I was not able to gather the correct package name that would probably had helpded me by removing and installing it again.Next to fixing my setup, I had another idea as this is a quite new install to just re-run the install again on to that machine. Is this possible with keeping the files in my homedir?
View 9 Replies
View Related
May 29, 2011
I am having a problem with the nouveau driver in Fedora 15 Code: lspci | grep VGA 40:00.0 VGA compatible controller: nVidia Corporation NV41GL [Quadro FX 1400] (rev a2) The problem is that when I boot a Fedora 15 live Cd, either gnome or xfce, the monitors initially seem to work in that they display at the proper resolution, both as the CD boots and as X initially starts. I can see the background and the mouse cursor - it is "busy" ...
As the desktop finishes loading, however, my primary monitor becomes disabled. With gnome the screen goes black, with xfce it goes white. I can still see the mouse on my secondary monitor, but I can not seem to open any applications (such as a terminal) or change to a console (ctrl-alt-F1 or ctrl-alt-F2). I can boot into safe mode. Adding the boot option video=xxx sets the resolution on the console as it boots, but does not help running X.
View 1 Replies
View Related
Jan 12, 2010
I just installed F12 over a former F9 system. I have a a nvidia TNT2 card. Formerly it was using the nv driver, which I understand has been replaced by the nouveau driver. Specifically this is what is reported in Xorg.0.log
Code:
The install ended up with a xorg.conf setting the driver to vesa. I presume this is because the standard install/upgrade option did not work and I had to install using the "basic video driver". Since I used this system to watch DVDs, the vesa driver does not work for me (too slow). So I tried removing the xorg.conf and followed these instructions for unsupported nvidia cards in order to try to get the nouveau driver working.
This failed. I I got was a black screen with a cursor following the mouse. Checking the Xorg.0.log I see the nouveau crash dump listed below.
I checked for fedora bugs, but I saw nothing like this one. I can't watch DVDs on this system at this point.
Code:
Backtrace:
Fatal server error:
View 5 Replies
View Related
May 9, 2010
Sound was working until I tried to install a rawhide version of Nouveau which hosed my system.Backed out to where I started and the sound is gone.The hardware is not showing up in the System> Preferences> Sound.I reinstalled alsa and pulse audio.
Code:
lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
[code]....
View 1 Replies
View Related
Feb 10, 2011
I wanted to replace the Nouveau with the proprietary Nvidia driver. I removed Nouveau and changed to console mode with "init 1". Realizing that i did not properly save the binary file i switched back to graphic mode with "init 5" only to have the system freeze. I rebooted and chose the usual kernel in the grub menu. The system continued to load but froze right after the Fedora logo (which hides the textual loading details) finished loading. I can not even switch to a console with ctrl-alt-F1.
View 4 Replies
View Related
Jan 13, 2011
I'm using a remix of F14 called Fusion Linux. It's all the same as fedora14. It's come preinstalled with xorg x11 nouveau driver. So, i'm not using Nvidia driver. Now, the problem is that the graphics in wine application are really poor. Fonts appear to be really hazy. See this image to get me better: [URL].. In earlier version of fedora and wine, i used nvidia driver. Graphics used to be good at that time.
View 6 Replies
View Related
Nov 29, 2009
Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies
View Related
Sep 10, 2010
"Broadcom would like to announce the initial release of a fully-open Linux driver for it's latest generation of 11n chipsets. The driver, while still a work in progress, is released as full source and uses the native mac80211 stack. "
View 4 Replies
View Related
