when RPMfusion will have the ATI catalyst driver for Fdedora 14 in its repo? If it is going to take a log time then I might just install it from ATI's site, but I'd rather not go through all the trouble if I don't have to.
View 2 RepliesI opened a bug report on this in the RPMFusion bugzilla and other people have asked on the mailing list over there, without an answer.why the Fedora 14 repos are empty? See: [URl] Both i386 and x86_64 are empty in both the free and nonfree trees. Though strangely the updates trees for F14 are populated.
View 10 Replies View RelatedI keep getting the following error when trying to install anything:
Could not retrieve mirrorlist http://mirrors.rpmfusion.org/mirrorl...d-11&arch=i386 error was
[Errno 14] HTTP Error 404: Not Found
Error: Cannot find a valid baseurl for repo: rpmfusion-free-updates
So this tells me the servers are down however if i put the link in FF I don't get 404.I am installing on a new box and I can't get the stuff I need.
I am wondering if there is someone who have succeeded in installing the driver for nVidia GT 330M from RPMFusion in Fedora 13.
I followed the instructions here [url], namely,
1. recreate the initrd manually
2.yum install kmod-nvidia-PAE
It didn't work. I also tried the method mentioned at the section 'Troubleshooting', but it did not either.
The trouble I encountered after rebooting is : The progress bar changed from an icon at the center to three lines at bottom. After the three lines reached at the end, the whole screen just went to blank.
I am guessing that the three lines, instead of the icon, only shows if your video card is not so powerful. And In my case, the reason could be the driver didn't work properly.
I would prefer to be able to use the rpmfusion nvidia driver instead of the closed driver but when I try it, KDE4 runs fine for a while but then the whole display starts blinking and the cpu % goes to 99% for XMy PC is Fedora 12 x86_64, the video card is a XFX 8800GT[URL]1) installed the kmod-nvidia-190.53-1.fc12.1.x86_64 and dependencies2) blocked nouveau with rdblacklist=nouveau in grub.conf, 3) Ran: setsebool -P allow_execstack on4) fixed the xorg.conf (I had to move my old xorg.conf out of the way and merged my DontZap option back in)
5) rebootedI did not yum remove the nouveau driver,.... didn't seem necessary.My desktop will run for a while but inevitably starts flashing uncontrollably. I can't even ssh to it to run init 3 to kill X (I can ssh to it but for some reason I can't su to root to kill X).
The driver has crashed X and before I had a chance to find RPMfusion instructions on dealing with initrd, I removed the package just to keep X running.Uninstalling the package does not restore kernel and Xorg operation. I am still in VESA mode.Although they claim they don't put stuff in non-standard places and use RPM, still there is something left over, as nuoveau driver no longer loads.Now that system configuration is all over the place, it is not clear what they actually changed or replaced.
View 3 Replies View RelatedThe new kernel 2.6.32.14-127.fc12 is available but I can not found Nvidia driver for this on rpmfusion-nonfree-updates yet.
View 2 Replies View RelatedI'm new to linux. I'm using fedora 13, 64 bit, AMD athlon II processor. I tried to install ATI Catalyst Display Driver for linux but its giving following message
ATI Technologies Linux Driver Installer/Packager
which: no XFree86 in (/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin)
Error: ./default_policy.sh does not support version
default:v286_64:lib::none:2.6.33.5-124.fc13.x86_64:; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.tcXvmo
I just wanted to let everyone know that the latest 11.6 Catalyst driver has been released.I would like everyone to know that I have successfully installed the ATI drivers in gnome, but lost the usability of gnome-shell and automatically dropped back to the basic Gnome desktop. But I still have a usable system.
View 1 Replies View RelatedI have to do it on several machines, so I wrote a script. You don't have to reboot but you must exit X. Use it at your own risk
Code:
#! /bin/bash
# --------------------------------------------------------------
# What it does :
# - unload fglrx if needed
# - make a copy of /etc/X11/xorg.conf (if any)
[code]....
UPDATE 8/28/2009: I now recommend that people install the new packages instead of the manual instructions below, see this link:http://forums.fedoraforum.org/showthread.php?t=155503 (Howto for fglrx/catalyst (Ati driver) and Compiz-fusion)NOTE: After installing the packages, I had to do the things at the following link to make the above packages work:http://forums.fedoraforum.org/showpo...postcount=3564If you still want to install the driver manually (you do not need to if you install the packages above), the instructions are below:
Fedora 11 ATI fglrx driver manual install notes
Updated: 10/12/2009
========================================
[code]....
I am running a fresh installation of Fedora 13 on a 64 bit machine. I have an ATI Radeon HD5750 video card, and I want to install drivers for it. I have tried following Leigh's guide, but I have run into a problem. I cannot install kmod-catalyst because of the following error:
Code:
[root@localhost ~]# yum install kmod-catalyst
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Resolving Dependencies
--> Running transaction check
[Code]...
I've tried ubuntu distribution but I'm not so satisfied of it, a bit because of unity (gnome3 is a way worste of that but is much more smooth and fast) and because on my laptop i always go overheating. with ubuntu coretemp in idle are always on 60?C and go to 75?C watching a video...it was crazy! So I've tried fedora, and I'm so happy with it, also if it is a bit more complex to use! but with some tutorial and easylife i got it working.
I have a dell studio 1537 with intel core 2 duo and ATi Mobility Radeon HD 3450 I've installed catalyst driver and now I have weired color on the top bar...I know is a common prolblem there is a way to solve it? If I have to reinstall Mesa driver how can I remove the Catalyst ones? There is a tweak to have icon on desktop? or at least the trash? Cheese always crash when I use some effect, why? it is a problem of the already installed mesa driver? because I have this problem either with the standard driver installed on the system either with the catalyst and the webcam is laggy like a slow connection...
I'd like to know if the latest release of the ATI Catalyst driver is compatible with Fedora 13.
View 14 Replies View RelatedIs it possible for plymouth to work with the ATI Catalyst driver installed in Fedora 15 x86_64?
Is it that plymouth requires KMS and Catalyst doesn't provide it? With the nvidia driver, I could put a vga= line in grub and plymouth would run. Is there something similar for catalyst?
I have a laptop with ATI mobility 2400, and ralink wireless, I have not very experience with linux, I have tried many live-cds, ubuntu, opensuse, gentoo, fedora and all crash if I don't boot with the aditional option "clocksource=jiffies", i'm thinking of trying fedora 11 x64 but my main concern is about my ATI mobility VGA, in windows i need to install modded driver as original catalyst are not compatible with my system.
View 3 Replies View RelatedI had an earlier thread with wrong title and wasn't sure of the problem at the time. Now I have some details after checking all the threads about catalyst so posting a new thread. The problem: In korganizer (or To-Do list in kontact), whenever double-clicking or right-click->Edit.. a To-Do item in the summary list window, it crashes Xorg.
[Code]...
Fatal server error: Caught signal 11 (Segmentation fault). Server aborting I think it has something to do with the amd/ati catalyst driver and korganizer. My video card is XFX Radeon HD5670. I have Fedora 14 x86_64 latest update with xorg 1.9.1-3. I tried catalyst 10.9, 10.10, 10.11, and kernel 2.6.35.6-45.fc14.x86_64, 2.6.35.6-48.fc14.x86_64, 2.6.35.9-64.fc14.x86_64. Same problem.
If I use vesa driver, or from another PC with proprietary nvidia driver, no problem. Open source radeon driver works ok but sometimes the display turns off and I can't get back the display. And I need 3D. I scoured through the forum and followed the instructions exactly:
[code]...
I recently had problems with my HP printer in Fedora 12, where as I never had a problem with it in any other distrubution.... For some reason, the HPLIP driver in the repo doesn't work correctly... I don't know why... but I kept getting errors with "error: Printer queue setup failed. Please restart CUPS and try again."
I tried every suggestion I found... which was installing extra dependencies, disabling firewall, disabling SELinux and a whole bunch of other stuff... but nothing worked... THEN finally I decided to use the HPLIP driver from the HP website... it was a .run file... and I executed it, and my printer has worked perfect eversince..... my question is.... has anybody successfully installed their hp printer from the hplip driver in the repo's..??? I don't know why it didn't work for me, and i've seen other fedora users complain of the same thing? maybe theres something wrong with the package? or its not pulling in a needed dependency? I don't know...
I've been searching for an hour or so and can't seem to find a concrete answer. My endgame is having Ubuntu successfully installed (either 9.10 or 10.04) with a fully working Ati 4870x2. I desperately need some help on finding the proper configuration of OS version and driver version. I installed 10.04 with the 10.3 driver package from ATI's site and it was a no go - I had nothing but problems.
I would like to have full 3d acceleration so I can play some games through Wine. This is a powerful card - I know ATI doesn't have a great reputation in the Linux world but I really hope there is a driver version I can install to get some good results.The rest of my specs are in my signature I need to install 64 bit Ubuntu to make use all of the system and video ram.
I have already downloaded and installed ati's catalyst for my ati mobility radeon 4570 (at least i think so, since there is the ATI catalyst control center in the system-> preferences menu). The problem is that i want to upgrade its version from 10.9 to 10.10. and since i want to firstly uninstall the previous version,I get this:
Code:
alexandros@alexandros-laptop:/usr/share/ati$ sh ./fglrx-uninstall.sh
sh: Can't open ./fglrx-uninstall.sh
The uninstall.sh doesn't exist.
I have Slackware 13.0 installed with the newest stable kernel (2.6.32.3) on an hp notebook with ati hd3200 igp. What happens is that when I try to buildpkg the catalyst drivers, it fails on the new kernel but not on the original one. I've been searching for a solution for a few days now. found a few that involved patching some files, but none seem to work or I can't make them work. I could probably use the binary installer but I would prefer not to.
Here's the output:
Code:
sh ./ati-driver-installer-9-11-x86.x86_64.run --buildpkg Slackware/Only_Module
Created directory fglrx-install.hokais
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.672......
ATI Technologies Linux Driver Installer/Packager
Generating package: Slackware/Only_Module .....
i'm attempting to know and understand fedora more and i will spend probably the next month pouring through all the forums and documents to answer more of my own questions. but there's quite a bit here, so i'd thought i'd ask some noob questions to get me started a little.
ive installed fedora 14 64bit and chosen only kde as the desktop. i selected an extra 2 repos besides the default, fedora 14 -x86_64 and fedora 14-x86_64 -updates. i believe this kernel is installed: 2.6.35.11-83
1. i can only see the 2 extra repo's as being "checked" in kpackagekit, shouldn't i see the default repo also ?
2. i dont have an applet in the system tray indicating the system is up to date, does fedora have this by default ? also after a clean install i ran yum check-update and yum update but the message sayes: "no packages marked for update". i'm not sure if the system is auto-updated during install or not, but with other distros iv tried there is always atleast a few updates needing to be done after install.
3. is kpackagekit the fedora gui package manager ? i dont see any others.
4. i want to upgrade to nvidia drivers, but i think i am missing a non-free repo or something. when i enter: yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64 i get messages stating "no package" i get the same message with yum install nvidia-settings.i also tried this: LANG=C yum --enablerepo=rpmfusion-nonfree info akmod-nvidia but it sayes repo not found.
I tried to install the ATI proprietary driver for an HD 5800 (Catalyst for Linux 64 bit, v. 10.8). The two main instruction sites are:
SDB:Configuring graphics cards - openSUSE
SDB:ATI drivers - openSUSE
I chose the hard way method. I downloaded the driver. Restarted SuSE 11.3 in mode 3. And as SU followed the method above, including adding the zypper programmes (which found some already installed and which installed a whole lot more). When I then attempted to run the install (sh ./atidriver-install-10.8-x86.x86_64.run) and selected automatic mode. It completed 82% and stalled attempting to install "Postprocessing Kernel Module".
I pressed control c to kill the process and attempted to re-install using the manual mode and then using the build mode. In both instances, same outcome. When I rebooted, and entered my password, the desktop did not load but sent me back to the username/password page. I can't get back in. Does not matter as I have backed up my docs.
I decided to install the proprietary driver because the colours on the desktop corrupt after the 2nd boot following a clean install. i.e. on the initial boot the colours are fine. Second, this is the 3rd effort I have made to install the driver after a clean install of SuSE 11.3 and there is no change in outcome. So, my question: anyone any suggestion what is going on and how I can install the driver successfully? Or, do I not understand the new regime in SuSE 11.3 and should I not attempt to install a new driver.
I realize that Canonical is not responsible for the Catalyst driver, but I can't seem to operate outside of the Ubuntu Classic (no effects) mode for 64 bit Natty, and I was curius if anyone else had encountered or resolved this.
When I upgraded from 10.10 (I was using the fglrx package), xorg would immediately crash. I was able to reach the gdm screen only using recovery mode. I uninstalled the fglrx package, and now I can boot into Ubuntu Classic (no effects) mode only (no other desktop will work) using the open-source driver at no greater than 1280x1024.
When I try to re-install the catalyst driver using aptitude or Administration->Additional Drivers, the installation fails:
(jockey.log: WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx)
Similarly, package generation from the AMD page fails:
Installation complete.
*** glibc detected *** ./setup.data/bin/x86_64/setup: double free or corruption (fasttop): 0x000000000259f630 ***
======= Backtrace: =========
[Code].....
I have a laptop with an nvidia graphics card: GeForce 9200 Nouveau causes problems, I can't boot the Live F14 CD except in safe graphics mode. I want to install F14. I have F12 and use kmod-nvidia How do I tell the installed F14 to boot in safe graphics mode? Some command line parameter? Or alternatively: how do I get the rpmfusion repos written into yum.repos.d? After that I can install kmod-nvidia. if I can't boot into GUI, I don't know how to write to /etc/yum.repos.d
View 7 Replies View RelatedEvery time I try to install my updates for the past week or so, I get this box: [URL]. If I hit yes, I get this box: [URL], and if I hit cancel, all my updates fail. How can I fix this?
View 1 Replies View RelatedI started with a fresh install of fedora 12. I have never encountered this problem before but yum seems to stall when I install rpmfusion packages. I have tried this multiple times, it works as long as I do not install them.
It stalls after this line.
Code:
I am guessing it has to do with the rpmfusion servers/mirrors? I just want to install the propreitary wireless and graphics card drivers, can this be done without using rpmfusion? (i.e. alternatives to kmod-wl and kmod-nvidia)
Something I haven't see explained or discussed here. On a new install should we do a full update and then setup the rpmfusion repositories or setup the rpmfusion repositories and then do a full update?
View 6 Replies View RelatedJust wondering whether there are plans to upgrade the x264 in the rpmfusion repo to a more recent build. These are the current ones in rpmfusion and what I have installed. Build date is October 2009.
Code:
x264.x86_64
0.0.0-0.24.20090319gitc109c8.fc11 @rpmfusion-free
x264-devel.x86_64
0.0.0-0.24.20090319gitc109c8.fc11 @rpmfusion-free
x264-libs.x86_64
0.0.0-0.24.20090319gitc109c8.fc11 installed
Available Packages x264-devel.i586 0.0.0-0.24.20090319gitc109c8.fc11
rpmfusion-free
x264-libs.i586
0.0.0-0.24.20090319gitc109c8.fc11
rpmfusion-free
Unfortunately things like h264enc and I'm sure others have moved on ahead and the dependencies on the x264 libraries means things like ffmpeg, mencoder, gstreamer, vlc, avidemux are having issues. With major dependencies it's difficult to upgrade the individiual components. A couple of examples, ffmpeg requires a newer build as it has some issues with MS's dvr-ms format. Apparently it was fixed in a newer release of the code. Another is some of the encode parameters in x264 being used in h264enc such as "weightp", "mbtree" which appear to be only supported in newer versions of the x264 libraries. Any chance that this is being looked at and newer and more recent builds of x264, and then I suspect with mencoder, ffmpeg etc...?
I read all wiki-nvidia, add rpmfusion (yum update ; yum upgrade)
Code:
Code:
What i must do to install this driver ?
Fedora 13 is a new distro and have big problem with nvidia ? what fck ?
Nvidia is standard card EHH :/