Fedora :: Reboot System Before Write DVD?
May 8, 2010
I use Fedora12 AMD 64 and use Gnome and use K3B for write CD and DVD , when my system is ON for 1 hour and I want write DVD with K3B , I have to reboot system and after reboot , I can write DVD and I do not have problem , but when I do not REBOOT system and start write DVD , write 4.3 GB od DATA , take long time , and my fedora write on DVD in 8 hour and sometimes it take long time , but after reboot write one DVD take 16 min. I do not know why .
fedora work for 1 hour -----> when dose not reboot system --> take 8 hour for write one DVD Fedora work for 1 hour -----> when reboot system ---------> take 16 min for write on DVD
this is happen when I use brasero for write DVD. my HDD is 80 GB and I use Default partitioning rule for partition my HDD
View 3 Replies
ADVERTISEMENT
Nov 1, 2010
Today I installed starDict in my Fedora LiveUSB, after I reboot machine. The system backtrack the original one, and then I update the kernel, the system also backtrack.
Why LiveUSB have this function. Can you explain theory about LiveUSB.
View 2 Replies
View Related
Mar 2, 2011
today i installed nvidia graphic card drivers for fedora13 using yum, after giving reboot command the system hangs during bootin.
View 1 Replies
View Related
Mar 31, 2010
Having a problem with my system hanging after updating Fedora 12. Here are my system specs:
Gigabyte MA770-UD3 motherboard
AMD Phenom 9950 Quad Core
6 gig Corsair DDR 800
1 x 160 gig SATA (OS)
1 x 500 gig SATA (data)
I have my system configured for dual boot with Windows 7. After installing F12, I can reboot with no problem. However, after I install the kmod-nvidia drivers, my system hangs on reboot. If I press any key on the keyboard, it will start to load, the freeze until I press a key again. I have tried both Fedora 12 x64 and i386 with the same results. Here are the steps that I took to install the kmod-nvidia drivers code...
Does anyone have any suggestions as to what I am doing wrong?
View 9 Replies
View Related
Nov 17, 2009
Ive installed Gaussian '03 on fedora Core 10, but I'm unable to run it. It aborts and i get the following error
Code:
Erroneous write during file extend. write -1 instead of 4096
Probably out of disk space.
Write error in NtrExt1
View 3 Replies
View Related
Jul 12, 2010
I just installed Fedora 13 x85_64 on Intel s45sf server board with hardware raid and 8Gb memory. After installation and reboot I got the message: Error Loading Operating System I tried installation with no raid I doesn't work.
View 1 Replies
View Related
Feb 16, 2011
last -a shows server rebooted, how to identify the source or cause of reboot? thx reboot system boot Wed Feb 16 08:52 (02:0 2.6.21.7-2.fc8xen
View 2 Replies
View Related
Apr 27, 2011
I'm using Ubuntu 10.0.4. I downloaded an old script for starting/shutting down a service I have, and evidently "initlog" doesn't exist anymore. What is the correct way to write to the boot (system?) log?
View 2 Replies
View Related
Jun 30, 2011
I just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.
View 12 Replies
View Related
Mar 12, 2010
After a system crash while watching a video with vlc and downloading somthing, i can't reboot my system.In the secure mode i get this informations[4.774621] device-mapper: dm-rai45: installized v0.2594b[ 1166.832045] ACPI: EC: non-query interrupt recived, switching to interrupt modeNow the scree is black (20 minnutes later
View 1 Replies
View Related
Jul 19, 2010
I have a friend who needs a script to reboot a system every 5 min... not sure how to set cron to do this every 5 min.
View 1 Replies
View Related
Sep 8, 2011
I was wondering if anyone knew how to add a user/pass and allow them to issue the reboot command. Ideally, I dont want them to be able to see files/directories or anything else for that matter.I was thinking something along the lines of a chroot jail that has a single script that would call the reboot.
View 2 Replies
View Related
Jan 6, 2011
Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.
This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.
I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:
Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin
[Code].....
View 9 Replies
View Related
Jul 7, 2010
in a previous version of openSUSE (I think it was v10.3), there was a possibility to directly/automatically start another OS after exiting (rebooting) openSUSE. This could be done through "right-clicking" on the Reboot (Restart) button from the KDE's log-off dialog and choosing the OS you wanted to be started after the restart. Please, does anybody know if this is possible in openSUSE 11.2 (KDE 4.4)? PS: I know that GRUB enables that, but I prefer a "GUI way" rather than using command line and editing configuration files
View 4 Replies
View Related
Mar 21, 2010
I am using Ubuntu 9.10. Every time I try to reboot my system it hangs. Shutdowns work properly. I've done multiple re-installations. Nothing I've tried fixes the problem. Does anyone have any suggestions?
View 4 Replies
View Related
May 3, 2010
I ran Karmic until last week, and noticed that it seemed to be getting slower. I was hoping a clean install of Lucid would fix that. it's worse. If I leave my machine running for a few hours, something begins dragging down the performance to a crawl.
System Monitor sometimes won't come up - launches an empty grey window. Other times, System Monitor reports that gnome-system-monitor is consuming 86-96% CPU. This is a dual-core Dell e6500 laptop with 4 Gigs of RAM, it should fly. Any ideas on troubleshooting this?
View 5 Replies
View Related
May 11, 2010
How can I stop Firefox from always loading when I restart my computer?
View 2 Replies
View Related
Aug 15, 2011
A few days I used the wubi installer to install Ubuntu over Windows. This I did on my C: drive. I also have another partition, the X: which now is my D: drive after I used the gparted live cd to give the system partition more free space. No problems so far.
But now, when I use Clementine Player, I see that it cannot find any of my songs in my library and Deluge has to 'check' my downloads every time I open it after a reboot. My theory is that the folder inside /media/, which contains the file system gets a new name (a 16 digit capital letter/number name) every time I reboot my computer - or maybe every time I use Windows and then Ubuntu again? It's pretty annoying,
View 1 Replies
View Related
Mar 18, 2009
We are running SUSE 10 SP1 and MySql 5.0.62 with heartbeat configured cluster attached to a SAN and after upgrading powerpaths on the fiber switches we had to reboot the machines and remount the SAN luns.
The cluster successfully started and was working fine for about a day or so and then i logged in as root and hosts, fstab, known_hosts were all giving me this error when i tried to modify them "W10: Warning: Changing a readonly file"
I failed over to another node and same thing happens on another node. I can't modify any of these files
View 2 Replies
View Related
Jul 13, 2010
I have a smoothwall linux box that I need to setup an automatic reboot daily. Can anyone point me in the right direction to begin.
View 1 Replies
View Related
May 28, 2011
I have upgraded Fedora 13 to Fedora 15 using installation DVD. Upgrade went well, no issue. After the reboot, the system stops after following line:
Started LSB: Suspend/Resume libvirt guests on shutdown/root.
I do not have any idea what kind of problem is, also I would like to keep my old version installation.
View 4 Replies
View Related
May 1, 2011
fairly new to linux and tried Slack as a way to force myself to learn. I am running current and when i issue the reboot command it will hang on "Restarting system". If i use the shutdown -r now command it will reboot fine. Any ideas?
View 4 Replies
View Related
Jan 2, 2011
Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.
This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.
I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:
Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin
[Code]....
View 1 Replies
View Related
Sep 7, 2010
I have a file system that I can't seem to read and write to. I've tried everything I can think of.
Code:
root@xubuntu:/mnt/t1# ls -la
ls: cannot access .Trash-1000: Input/output error
[code]....
View 2 Replies
View Related
Mar 21, 2010
I installed Linux on a laptop once.. i'd like to do a dual boot but i've never done it before. Is there anything special i need to do? i don't want it to write over my current operating system.
View 10 Replies
View Related
Dec 12, 2015
I use Debian testing for six months and I started used it six months ago. I use apt-get distupgrade for long times , but today after apt-get update and apt-get dist-upgrade , my system reboot and can not boot and I see URL...and system can not , I see this errors after grub
View 14 Replies
View Related
Aug 3, 2010
I am trying to update my OS from Opensuse 11.2 to 11.3 using the installation DVD (checked OK). Everything is OK during the installation process until the message "System is going to reboot" is displayed with a countdown : when the countdown is finished, the screen becomes black and the screensaver starts, but the system does not reboot. When I reboot manually, after selecting "Opensuse 11.3 desktop" on the first menu, the screen becomes black and the screensaver starts.
So the installation seems incomplete and I do not know how to finalize it. When I select the failsafe option on the first menu, it seems to work but some behaviours are quite "strange"... When I choose update instead of installation at the beginning, the behaviour is the same.
I do not know if it is linked but the firmware tests started from the installation DVD show the following errors :
Memory tests are OK.
View 5 Replies
View Related
Nov 21, 2010
Recently I installed openSuSE 11.3 x64 on PC with Intel motherboard, 4GB RAM & two of 1TB WD RE3.Of course I set RAID1 during installation After some struggle with GRUB which pointed to wrong devices after installation I started to work. But suddenly I found that file system is corrupted after every reboot (It does not depend on what I use and what the way I use - reboot, shutdown -r now or even just poweroff - everything follow to:
Starting MD Raid mdadm: /dev/md2 has been started with two drives
mdadm /dev/md3 has been started with 2 drives
mdadm /dev/md4 has been started with 2 drives
mdadm /dev/md5 has been started with 2 drives
[Code]...
View 7 Replies
View Related
Jul 23, 2010
I have an Nvidia GT9600 card and want to load the Nvidia drivers. As per the 1 click install I set nomodeset and installed the drivers from 1 click. On reboot, well there was'nt a reboot just got a blank monitor, no BIOS screen, nothing. After stuffing around with my system for about 1 hour clearing CMOS and unplugging and re-plugging just about everything I managed to get my system back.I do not like the New Neuoveaux (or however you spell it) Graphics drivers, get some wierd artifacts on my monitor?
View 3 Replies
View Related
Mar 1, 2010
I have a personal ubuntu server that provides apache, glassfish, firewall, routing, email, CVS, MySQL, etc.... This server has been running for a while with two hard drives configured into a RAID 1 array. The array has two partitions, one for swap and one for the data. I currently back up the data with a removable hard drive. I use dd and create an image of one drive and the MBRs (partition tables) of each drive.In a disaster situation I can use this data to recreate one drive and then re mirror it to the second, or just boot the back up.I like this solution because I can easily recover from bare metal, and the backup is transparent. I can browser it if needed since its an uncompressed image of the drive. The one drawback is that I need to reboot the system with a linux CD to do the backup.
My hard drive space is almost at capacity. So what I want to do is add a third drive to the array and migrate it to RAID 5. However this will cause my current backup method to no longer work. How can I back up this RAID 5 array. I need to back up the entire system, and not just the data. I have made many tweaks to the system over the years that it has been running that I can't lose if a restore is needed. I have seen a large thread here that people have been using tar. My concern with tar is how do you use a tar archive to restore a system to a new array. Im assuming that you would need to setup the array and then just restore the archive? Also, i don't have much faith in using tar on a running system. Doesn't this open yourself up to corrupted backups? My second idea is using rsync. While I consider myself experienced in linux from 10 years of personal and professions use, I have not had much experience with this utility. Would rsync provide a more reliable way to backup a running system that would enable a bare metal restore later? I once read something about people using rsync with hard links to create a backup that could store many incremental backups.My main concern with both rsync and tar is not being able to restore the OS to the state that it was in at the time of the backup.
View 4 Replies
View Related
