Ubuntu :: Firefox Always Starts On A System Reboot?
May 11, 2010How can I stop Firefox from always loading when I restart my computer?
View 2 Replies
ADVERTISEMENT
Server :: Apache Never Starts On Reboot?
Mar 3, 2010I've been pulling my hair out on this one. I haven't had to reboot my server in many many moons, but when I did recently, everything fired back up just fine... except httpd!The strange thing is that if I log in after reboot and simply type:
Code:
service httpd start
It starts up just fine!
[code]....
General :: RAID 1 With 2 Disks Starts Degraded After Reboot From 3rd
Jun 20, 2010Basically, I installed Debian Lenny creating two RAID 1 devices on two 1 TB disks during installation. /dev/md0 for swap and /dev/md1 for "/"
I did not pay much attention, but it seemed to work fine at start - both raid devices were up early during boot, I think. After that I upgraded the system into testing which involved at least upgrading GRUB to 1.97 and compiling & installing a new 2.6.34 kernel ( udev refused to upgrade with old kernel ) Last part was a bit messy, but in the end I have it working.
Let me describe my HDDs setup: when I do "sudo fdisk -l" it gives me sda1,sda2 raid partitions on sda, sdb1,sdb2 raid partitions on sdb which are my two 1 TB drives and sdc1, sdc2, sdc5 for my 3rd 160GB drive I actually boot from ( I mean GRUB is installed there, and its chosen as boot device in BIOS ). The problem is that raid starts degraded every time ( starts with 1 out of 2 devices ). When doing " cat /proc/mdstat " I get "U_" statuses and 2nd devices is "removed" on both md devices.
I can successfully run partx -a sdb, which gives me sdb1 and sdb2 and then I readd those to raid devices using " sudo mdadm --add /dev/md0 /dev/sda1 ". After I read devices it syncs the disks and after about 3 hours I see fine status in mdstat. However when I reboot, it again starts with degraded array. I get a feeling that after I read the disk and sync array I need to update some configuration somewhere, I tried to " sudo mdadm --examine --scan " but its output is no different from my current /etc/mdadm/mdadm.conf even after I readd the disks and sync.
Ubuntu :: Firefox Starts On It's Own - When Log Into 9.10
Jan 7, 2010Why Firefox starts up when I log into Ubuntu 9.10...Wasn't doing it before...?
View 3 Replies View RelatedUbuntu :: Firefox Starts But Grays Out?
Sep 13, 2010When Firefox starts, it loads the home page (Google), but then it greys out and ceases operating - even the 'Well , this is embarrassing' page when it restarts after a forced close greys out. I've used Synaptic to re-install Firefox, but it makes no difference.At the moment I can't use Firefox as my main browser (which has all my mostrecentbookmarks/passwords etc in it), I'm using Google Chrome to post this.
View 5 Replies View RelatedUbuntu :: Firefox Always Starts Maximized?
May 20, 2011I don't know if it's a bug or a "feature", but every time I start Firefox in Unity it opens in maximized mode. As for many people this is what they like it may be convenient for them, but for the more drag & drop people like me that like to have several open windows on one screen it is rather annoying. It means I must normalize the window every time I start the browser. Is there a way to stop this behavior?
View 4 Replies View RelatedUbuntu :: Firefox Starts On Boot - How To Stop This
Mar 17, 2010Just over the past few days Firefox 3.5.8 now starts as soon as the desktop has loaded - it's not set to do this in 'Startup Applications' - how do I stop it starting on boot?Also, over the same period, if I click a javascript link, nothing happens, it no longer opens the relevant page or image; so I click it again and still nothing, however several minutes later the page/image may open, but not always.Also if I close Firefox, then later click a link in an email it no longer opens Firefox - I then have to go into 'System Monitor > Processes', find and then 'end process' for Firefox (cause it's sleeping) before I can actually start it.I've gone in Synaptic and 'reinstalled' Firefox, but it made no difference. I cleared the cache and all cookies as well - could something have got into Firefox, and if so how can I fix it ?
I'm using karmic 9.10 32 bit with kernel 2.6.31-20-generic-pae update - it appears it's a javascript problem within Firefox as I can no longer open the popup window for online banking from my banks webpage link - I can do this in other browsers such as Epiphany, Google Chrome and Opera, but not in Firefox
Ubuntu Security :: Firefox Starts Up With Adverts ?
Jun 6, 2010I don`t know how did that happen but now after reboot my firefox starts with pocker and porno web-pages. I don`t play pocker, never did. Yes, a couple of times I did watch... But I didn`t install or change anything (extentions or add-ons) in firefox. I acrually didn`t change anything in system and now firefox starts up with those adverts. In settings of firefox I have "show last opened pages". Of course I didn`t close ever my firefox with a couple of adverts. And it does only after reboot. So, if I close it now and open again it will show the last pages. But after reboot ... Well, if I saw something like that in windows I`d think that there is a virus or something else like adverts-virus but I`m in kubuntu. Kubuntu 10.04.
View 4 Replies View RelatedUbuntu :: Firefox Starts Fullscreen In Unity?
May 13, 2011After maximising Firefox in natty the top panel and sidebar are not accessible.when I press F11 the close max and min buttons appear in the top right corner, but the window is still full screen it makes it very hard to access other open windows. Has this bug been reported.
View 2 Replies View RelatedUbuntu :: Firefox Always Starts In Offline Mode, Internet Is Fine?
Jul 23, 2010I don't have any connection issues, but Firefox always starts in offline mode. I can uncheck it and everything works fine. If I close and reopen it Firefox switches back to offline mode.
View 4 Replies View RelatedFedora :: Firefox Starts In Off-line Mode ?
Jun 29, 2010Finally solved a problem of wireless not working on my laptop. Now I have a problem where Firefox (3.6.4) starts up in off-line mode on each instance. I have to go to files menu and uncheck the work offline button before trying to go to any site. When I close firefox and later open it again, the work offline button is still checked.
Why is the unchecking of work offline saved between instances? Other settings and preferences are saved correctly. I don't have this problem in openSUSE 11.2 & 11.3 (same version of FF).
Fedora 13
kernel 2.6.33.5-124.fc13_x64
KDE 4.4.4
Firefox 3.6.4
Dell Studio 1745
Intel Mobile Series 4 wireless 5100bg
Ubuntu :: Firefox Starts In Offline Mode - How To Make It Online By Default
Oct 16, 2009How to make firefox online by default. It always starts in offlin mode.
View 2 Replies View RelatedFedora :: Firefox Graphics Different Depending On Whether It Starts Normally Or From Startup
Apr 22, 2010trying to get Firefox working properly. I have the tarball installed from Firefox�s site and am using Fedora 12 with KDE as the desktop environment. The problem is if I start Firefox normally, say, by just clicking on the firefox script, then the graphics will be rather crude; but when Firefox starts as soon as I log in (because I�ve configured it to auto-start) then the graphics will be nice and smooth. I�m having a hard time trying to find answers for this because I�m not exactly sure what�s happening? I think when it auto-starts as I log in, it�ll use... well, this is the bit I haven�t got a clue how to explain? I�d guess one time it uses QT, and the other time it�ll use GTK.
I don�t know why it�s doing this, and when it�s started normally and I go to shutdown most of the time it�ll come up with a crash report. There isn�t any difference in the way Firefox is being opened, the auto-start calls upon the same script that my shortcut uses, which is the same as clicking on the firefox script in the firefox folder. I have a few images attached to elucidate the problem. I understand I may not have made myself very clear, but I�m having a great deal of trouble understanding what precisely is going on.
Firefox can seem a bit glitchy when the crude graphics are in use. Like the mouse-overs which leave traces of the box behind when you move the mouse away. So I�m having to logout then back in if I�ve happened to close Firefox and want to reopen it...
Ubuntu :: Use Any Of Places Menus, Home, Downloads Etc, M-Player Starts, Not Firefox And Uploads All The Files To A Playlist?
Dec 11, 2010Ive looked around and can't seem to find an answer to this. If I use any of my places menus, home, downloads etc, M-Player starts, not Firefox and uploads all the files to a playlist
View 1 Replies View RelatedFedora :: Rebooted - Desktop Starts For A Very Short Time Then Disappears - YUM Does Not Work Neither Does Firefox
Apr 9, 2010I updated Fedora 9 yesterday. I rebooted earlier and now the desktop starts for a very short time then disappears followed by a window opening and closing for a few goes. After this nothing! YUM does not work, neither does Firefox! A bug report informed me there was a Python problem but I can find no reference to this anywhere.
View 1 Replies View RelatedUbuntu Installation :: Get A Black Screen When The System Starts Up?
May 1, 2011i have tried to install Ubuntu 11.04 but everytime i try i get a black screen when the system starts up. i have tried to install via cd and the upgrade option.I am currently using Ubuntu 10.04 and this has no problems.I have also tried the esc key when i insert the disc and this brings the option to install but after this i get a black screen again.
View 9 Replies View RelatedFedora :: Open An Application When System Starts?
Jul 15, 2010How to open an application when fedora system starts.
View 4 Replies View RelatedFedora :: System Starts In Grub Prompt?
Jun 20, 2011I have Windows Vista in a primary partition & Fedora 14 in a logical partition.
Recently, I increased the size of the extended partition and created another logical partition inside it. I formatted the new logical partition from Vista.
After reboot, instead of the list of operating systems, I started getting "grub>"
I searched on the internet and modified entries in /boot/grub/grub.conf, from (hd0,4).. to (hd0,5)..
I still get the grub prompt, but if I enter " configfile (hd0,5)/boot/grub/menu.lst " it shows the os list & I can use Fedora.
How can I configure the system so that it shows the list of os instead of "grub>" ?
Ubuntu Multimedia :: System Starts In Low Graphics Mode And Never Shows The Desktop
Jun 5, 2010I downloaded a linux kernel from linux.org to check what is the kernel is about, i clicked on make_file or make sth .. and in the same session i downloaded a program called login window.
Now the problem is that the system boots ok, it gives me a msg saying that system is running in low graphics mode, when i press ok i get a few options like troubleshootin or restart x or use back up configuration .. and nothing works .. when i press start normally it never stops loading .. i can see the terminal when clicking ctrl + alt + f1,f2 ... but when i press ctrl + alt + f7 or return back to the desktop ubuntu is still loading .. it never stops loading.
And after using ubuntu for a while i really hate windows 7 .. i have it on the system, so is there a way to fix this problem?
OpenSUSE :: Start Vncserver Service When System Starts?
Apr 29, 2011dear, in centos / fedora, I can config to start a permanent vnc session by setting the /etc/sysconfig/vncserver file when the system starts. Is there any similar configuration in opensuse which give me a permanent session?
View 6 Replies View RelatedGeneral :: High IOWait - System Starts To Slow Down
Jan 5, 2010I've been having a problem in Ubuntu 9.10 recently where starting about 2 minutes after startup my computer slows down and becomes unresponsive. I believe the problem is associated with a high IOWait because I have the system monitor applet on my Gnome Panel and it displays 100% IOWait every time my system starts to slow down. I have tried booting into other kernel version and the problem persists. I don't really know what IOWait is or how to diagnose this problem further. I've looked around online and it seems like you have to find a specific process that is causing the IOWait, but I don't understand how to go about doing that.
View 6 Replies View RelatedProgramming :: Start Up A Shell Script When The System Starts?
Mar 1, 2010This is on Fedora 11. How do I start up a shell script when the system starts?
View 6 Replies View RelatedSoftware :: Ubuntu 10.04 - VNC - When Computer Starts Up/reboots It Doesn't - Unlock The System Keyring
Nov 11, 2010I've got a computer i'm trying to VNC to.
The problem is that when the computer starts up/reboots it doesn't "Unlock the system keyring"(I think that's what it said).
When I try and attempt to connect to the computer it asks for the VNC password(as per normal) but fails to connect after that.
The reason is that the Ubuntu computer prompts for the user's password to unlock the system(locally).
What I want is to be able to turn on the computer without having to worry about entering the password. I've had it running fine on 8.04 yet the newer version seems to be annoying :s
The system is set to automatically login on startup too.
I've tried this: "delete the keyring folder under /home/XXXX/.gnome2" then setup remote desktop again. But that hasn't worked either. I still have to enter the password to a keyring
OpenSUSE :: When System Starts, The Bluetooth Monolithic Applet Is Always Started?
Apr 14, 2011When my system starts, the bluetooth monolithic applet is alwaysstarted. I'm not using any bluetooth devices, so there's no need to runit but I can't find where to stop it from loading.I ran chkconfig andit's not there.[URL]
View 3 Replies View RelatedFedora Hardware :: BIOS Broken Message When System Starts / Restarts
Jul 1, 2010Since I have installed fedora 13 in my system (HP pavilion 1506tx) I rtsam getting this error every time my system starts/ restarts. I don't know how to correct this error. Here is the message displayed in Automatic Bug reporting tool
------------[ cut here ]------------
WARNING: at drivers/pci/dmar.c:647 check_zero_address+0x7d/0x191()
Hardware name: HP Pavilion dv4 Notebook PC
Your BIOS is broken; DMAR reported at address zero!
BIOS vendor: Hewlett-Packard; Ver: F.55; Product Version: 039B140000241210100020000
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.33.5-124.fc13.i686 #1
Call Trace:
[<c0436df5>] warn_slowpath_common+0x65/0x7c
[<c09d92a3>] ? check_zero_address+0x7d/0x191
[<c0436e40>] warn_slowpath_fmt+0x24/0x27
[<c09d92a3>] check_zero_address+0x7d/0x191
[<c05edc18>] ? acpi_get_table_with_size+0x53/0xa1
[<c09d93c8>] detect_intel_iommu+0x11/0x69
[<c09bd888>] pci_iommu_alloc+0x8/0xa
[<c09ca721>] mem_init+0xe/0x245
[<c09b776a>] start_kernel+0x1bf/0x34b
[<c09b73e7>] ? unknown_bootoption+0x0/0x18e
[<c09b7099>] i386_start_kernel+0x99/0xa0
Ubuntu Installation :: Upgrade To Lucid From Karmic, Update Manager Starts And Shows System Is Up-to Date?
Apr 23, 2010when i am tryg to upgrade to lucid from karmic, update manager starts and shows my system is up-to date. command used "update-manager -d"os karmic 64bit.
View 2 Replies View RelatedFedora :: F14 Dual Monitor - Firefox Starts On Wrong Monitor
Jan 27, 2011I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
OpenSUSE :: Can Only Start Firefox Once Have To Reboot To Get It Open A 2nd Time
Aug 28, 2011I will open firefox then scroll to file-quit firefox, firefox closes fine but when i want to open firefox again it wont, i have to restrate opensuse 11.4 linux 2.6.37.6-0.7 kde 4.6.0.0.
View 3 Replies View RelatedUbuntu :: System Crash. After That No Reboot Possible?
Mar 12, 2010After a system crash while watching a video with vlc and downloading somthing, i can't reboot my system.In the secure mode i get this informations[4.774621] device-mapper: dm-rai45: installized v0.2594b[ 1166.832045] ACPI: EC: non-query interrupt recived, switching to interrupt modeNow the scree is black (20 minnutes later
View 1 Replies View RelatedUbuntu Installation :: System Using Update Manager It Downloaded The Files And Then While It Starts Installation?
Sep 30, 2010I am facing a disgusting problem. While I am trying to update my system using update manager It downloaded the files and then while it starts installation it shows the following message
Code:
(Reading database ... 60%dpkg: unrecoverable fatal error, aborting:
files list file for package 'linux-libc-dev' is missing final newline
[code]....