OpenSUSE Multimedia :: After Setting Nomodeset Cannot Reboot System
Jul 23, 2010
I have an Nvidia GT9600 card and want to load the Nvidia drivers. As per the 1 click install I set nomodeset and installed the drivers from 1 click. On reboot, well there was'nt a reboot just got a blank monitor, no BIOS screen, nothing. After stuffing around with my system for about 1 hour clearing CMOS and unplugging and re-plugging just about everything I managed to get my system back.I do not like the New Neuoveaux (or however you spell it) Graphics drivers, get some wierd artifacts on my monitor?
View 3 Replies
ADVERTISEMENT
Jul 17, 2010
It's documented in the howto's that you need to have the nomodeset kernel parameter specified if you want to run the proprietary Nvidia driver. But I read in certain posts that this is only required for "older" graphics cards.Can someone shed some light on this? Is the parameter ALWAYS required when running the nvidia driver, or only for certain graphic cards?
View 9 Replies
View Related
Jul 19, 2010
After setting the "nomodeset" kernel parameter, to install the nVidia proprietary driver in OpenSuSE 11.3 (I need to do CUDA development), my Sansa Clip+ is no longer recognized. When I turn the "nomodeset" option off, I can see it with $(fdisk -l).
View 1 Replies
View Related
Jan 6, 2011
Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.
This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.
I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:
Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin
[Code].....
View 9 Replies
View Related
Jul 7, 2010
in a previous version of openSUSE (I think it was v10.3), there was a possibility to directly/automatically start another OS after exiting (rebooting) openSUSE. This could be done through "right-clicking" on the Reboot (Restart) button from the KDE's log-off dialog and choosing the OS you wanted to be started after the restart. Please, does anybody know if this is possible in openSUSE 11.2 (KDE 4.4)? PS: I know that GRUB enables that, but I prefer a "GUI way" rather than using command line and editing configuration files
View 4 Replies
View Related
Jan 2, 2011
Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.
This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.
I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:
Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin
[Code]....
View 1 Replies
View Related
Aug 3, 2010
I am trying to update my OS from Opensuse 11.2 to 11.3 using the installation DVD (checked OK). Everything is OK during the installation process until the message "System is going to reboot" is displayed with a countdown : when the countdown is finished, the screen becomes black and the screensaver starts, but the system does not reboot. When I reboot manually, after selecting "Opensuse 11.3 desktop" on the first menu, the screen becomes black and the screensaver starts.
So the installation seems incomplete and I do not know how to finalize it. When I select the failsafe option on the first menu, it seems to work but some behaviours are quite "strange"... When I choose update instead of installation at the beginning, the behaviour is the same.
I do not know if it is linked but the firmware tests started from the installation DVD show the following errors :
Memory tests are OK.
View 5 Replies
View Related
Nov 21, 2010
Recently I installed openSuSE 11.3 x64 on PC with Intel motherboard, 4GB RAM & two of 1TB WD RE3.Of course I set RAID1 during installation After some struggle with GRUB which pointed to wrong devices after installation I started to work. But suddenly I found that file system is corrupted after every reboot (It does not depend on what I use and what the way I use - reboot, shutdown -r now or even just poweroff - everything follow to:
Starting MD Raid mdadm: /dev/md2 has been started with two drives
mdadm /dev/md3 has been started with 2 drives
mdadm /dev/md4 has been started with 2 drives
mdadm /dev/md5 has been started with 2 drives
[Code]...
View 7 Replies
View Related
May 14, 2010
im about 3 weeks into linux, started out with fedora actually, but switched to ubuntu. First days of linux was intense but slowly got the hang of it and i enjoy it way better than my previous op vista.
Sound System Setup-
Sony Receiver 3 speakers and 1 subwoofer
From receiver Y connector -(red plug and white plug R/L) to audio plug that goes into laptop output. Laptop- AsusTek g51x with
PHP Code:
**** List of PLAYBACK Hardware Devices ****card 0: Intel [HDA Intel], device 0: ALC663 Analog [ALC663 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0card 0: Intel [HDA Intel], device 1: ALC663 Digital [ALC663 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0
PHP Code:
alsactl version 1.0.22
Sound card has Headphone,output,and input holes.
OS- Ubuntu 10.04
The setup worked fine on vista, but on ubuntu whenever i plug in headphones (headphone output) the laptops internal speakers shut off and there is no sound on the headphones, and when i plug in the sony receiver audio plug to my sound card output hole, the laptops speakers are still playing but no sound in the sony receiver. Also when i open the Ubuntu sound manager (I think its either pulseaudio or ASLA, stock gnome one) , it says on the Output tab, "Choose a device for sound output", but there is only one option and it says
"Internal audio analog stereo".
Im literally extremely lost at this point, i have read the forums for help, ASLA wiki (only shows USB sound device support) messed with the Sound Preferences, and spend around 9 hours in the last 2 days trying to make this work.
View 3 Replies
View Related
Jun 29, 2011
Installed 11.4 on a machine with two SATA drives which had previously been running Windows 2003. I deleted the Windows partitions and created a new partition scheme: Swap, root and one additional partition on the first disk, one large partition on the second disk. Install runs fine but upon reboot I get "Error loading operating system". Booting off a Windows floppy and running FDisk shows that the root partition is marked as active.
View 7 Replies
View Related
Jan 28, 2010
I added a whole slew of apps to my favorites and lost the 'Shutdown' option...every time I try to shutdown in the Terminal I am told I must be logged in as Root to do so...I can't figure out how to do this I'm a newbie to Linux but a CNE 5 -haven't used it 10 years- an MCP and A+ certified I've searched local help and SuSe's site and I can't find anythingI've only spent a couple of hrs on this and have had SuSe 11.2 installed since last Sunday
View 9 Replies
View Related
Jun 15, 2011
over here on my desktop I have KDE 4.6.4 running, updated from 4.6.0 through all intermediate steps. In the last few days I feel, that it got a bit unstable and I think, I have messed it up again, with doing some stupid things in the repository management. But of course, I don´t remember what I did...
So I am asking myself, if I could reset the system to the state where it came from: KDE 4.6.0, including all the updates from the standard openSUSE repositories.
I would do it as follows:
1. deactivate the additional KDE repositories and X11 from OBS (I needed it for installing xbindkeys)
2. switch packages to the standard repositories, which came with openSUSE, and also switch the packages to Packman
3. run an update, or how it is called, the switch back to 4.6.0
would this work, or would I completly mess the system up?
I then would leave it like it is, with the only additional repo´s: Packman
View 6 Replies
View Related
Sep 27, 2010
I'm running SUSE 11.3 with gnome (and pulseaudio, which I tried to get rid of, but for me it's just too much hassle to get audio working w/o pulse). The Master volume of my USB headset (2nd soundcard) is reset to 0 after each boot. In order to get it properly working, I have to run the YaST sound module and re-set the Master volume (which always is down to 0). Using alsamixer to do the same doesn't work (alsamixer shows no controls), probably because pulse grabs the device or does something else with it?
Pulseaudio version: 0.9.21-10.1.1.i586
Alsa version: 1.0.23-2.12.i586
Any input on what I can do to make the volume level stick?
View 3 Replies
View Related
May 7, 2010
The default output audio port Ubuntu doesn't work on my system. It should be "Analog Mono Output/Amplifier", instead of "Analog Output/Amplifier". I can easily change that in sound preferences, just by choosing the right port in the "Output" tab, or by issuing the following command:
Code: pacmd 'set-sink-port' 'alsa_output.pci-0000_00_1f.5.analog-stereo analog-output-mono;output-amplifier-on' The problem is both solutions apply only to a single account, while I would like to change it system-wide, so it applies to all accounts on the system (there are more then 100 accounts - it's a set up for a school).I'm using Ubuntu 10.04.
View 1 Replies
View Related
Oct 12, 2010
In System Settings under Appearance>Style>Fine Tuning tab there is the following setting for graphic effects. what it does and how it works because I don't seem to see any difference in the effect the settings have. By default it seems set to low display resolution and high CPU. This seems opposite to what one would expect it to be.
View 4 Replies
View Related
Jul 15, 2011
I have a Geforce GTX 460 GPU and I recently switched from Ubuntu to Suse 11 and I have installed the latest Nvidia drivers (the same as I had on Ubuntu) In Ubuntu I had configured the xserver to display my desktop on my LCD monitor and my LED TV as clones and everything worked fine When I change the settings in Suse everything works fine until I restart the Xserver. All my settings disappear and everything is back to the standard settings again. It doesn't seem to make any difference whether I have root privileges or not, and I have tried saving to etc/X11/xorg.conf., etc/X11/xorg.conf.install, etc/X11/xorg.conf.backup but each time I reboot everything is back to the default settings again. In Ubuntu I just saved the new settings to etc/X11/xorg.conf. and restarted the Xserver and all was fine.
Here is a copy of what I saved to the X config file:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 270.41.06 (buildmeister@swio-display-x86-rhel47-07.nvidia.com) Mon Apr 18 15:15:00 PDT 2011
Section "ServerLayout"
[code].....
ERROR: Invalid display device DFP-2 specified on line 56 of configuration file '/root/.nvidia-settings-rc'(the currently enabled display devices are DFP-0 on linux-c0rf:0.0). and all the settings are defaulted
View 1 Replies
View Related
Apr 26, 2010
We're in the final process of building a home, and I had them setup a wiring box where all the coax and cat5 terminates into one closet, which will also house my server. Once we get moved in I'd also like to add speakers in each room to have house-wide music, and ideally I'd like the audio to also run into this box with the master input coming from the server as well.My thought was to setup the server with some basic desktop manager like Fluxbox and use that to drive audio throughout the house, whether it be Pandora, Sirius Radio, or whatever. Since the server will be headless I'll need it setup so we can remote into it from our laptops, but I wasn't sure if VNC or some other RDP variant would work. Ideally we'll need to access a unified desktop so traditional terminal services where each users gets their own desktop might not be ideal
View 1 Replies
View Related
Jul 28, 2010
System won't retain 16:9 display size setting in YaST (SaX2). I'm using SuSE 11.1 (64 bit).
SaX2 settings as follows:
Monitor is Samsung Syncmaster XL2370-1 (digital). Resolution is set to 1920X1080 (1080p). Diagonal measurement set to 23 inches. Display size indicates 509 m.m. X 286 m.m. (20 3/8" X 11 1/2").
Aspect ratio is entered as 16:9, but after saving and restarting computer it keeps coming back as 16:10.
Samsung literature says 16:9, and measurements above confirm this.
So why does it keep going back to 16:10, and how can I get it to retain 16:9? (Same thing happens on another computer, also running SuSE 11.1, and with a second of these same monitors.)
View 9 Replies
View Related
Jun 16, 2011
When I first installed 11.4 I was unable to access the usb webcam mic on Skype. I use Tumbleweed and after a couple of KDE updates I was able to access the webcam mic in Skype. I did this by setting the webcam mic as the first device to use in either pavucontrol or systemsettings>multimedia>phonon>audio capture. There have been many KDE updates since then and now I am back to having no mic in Skype. I will set my webcam mic as described above but pavucontrol will no longer save my changes. It is permanently stuck using internal audio analog stereo as the first capture device. My webcam mic is listed but it is four down on the list and Skype will not access it.
How can I get pavucontrol to save my preferences?
View 9 Replies
View Related
Jan 25, 2011
I'm looking to find a way to ensure that what I'm hearing from my computer is Bit Perfect, and can also play 24/96khz files.
Audio on Linux has always confused me, so I'm not entirely sure where to start. So if we were to say I'd be starting from a fresh install of OpenSUSE 11.3, where would I have to go to achieve my goal with an M-Audio Audiophile 24/96 Sound Card (ICE1712 Chipset)?
View 4 Replies
View Related
Aug 17, 2011
I was having trouble with using my T500's internal microphone, and I figured out that if I run alsamixer in terminal, and if I increase the level of "internal mic," then it works fine. Now the problem is that it seems periodically the setting reverts and I lose the mic volume and I have to re run alsamixer and do the setting again.
Is there any way I can set this setting in KDE, and preserve the setting once it is done?
View 6 Replies
View Related
Jul 2, 2011
I'm using OpenSuse 11.4 64 bits with KDE 4.6.00 (4.6.0) "release 6". Since several days, the sound level setting via the sound icon at the right of the task bar is very slow, ie it takes several seconds (not to say one minut or more) between the action of increase / decrease the sound level and the effect on the sound level.Same behaviour when I select this sound level icon at the right of the task bar, the cursor appears one minut later.
View 3 Replies
View Related
Jun 24, 2010
Windows XP SP3 on a Dell Optiplex 755 less than a year old. The user is left handed and therefore swaps the mouse buttons in Control Panel - Mouse. For some reason that setting is not retained over a reboot. I've loaded the registry hive for that user and checked the setting and it is correct before the user logs on but somehow gets reset at login.
View 1 Replies
View Related
Jul 21, 2010
I change the audio channels to 6 in alsamixer by choosing my sound card and change the channels to '6ch'. But this setting is not preserved. I see that after a reboot the channels are again going back to 2ch. I have to manually change everytime to 6ch after each reboot. Is there a way to save the setting in alsamixer so that I will get 6ch everytime after reboot? I am not sure I have explained my problem in a way so that you can understand.
View 2 Replies
View Related
May 3, 2011
I have recently installed Fedora 14 onto my primary desktop which is equipped with an ATI Radeon HD 3870 graphics adapter and two monitors. Following the instructions here I have installed the ATI proprietary drivers via the akmod method recommended by the author. If I run the Catalyst Control Center via either su- or sudo to configure the desktops and log out/in to restart X everything works flawlessly. However, whenever I restart the computer the displays return to the default setting of a simple clone. Possibly related is that the system defaults to Fedora's "simple" text based start up/shut down screen rather than the pretty graphical one. I am confused as to why/how this could be happening and cannot find anything similar via Google, though I readily admit I may be using the wrong search terms. All potentially relevant information I can think of:
akmod-catalyst xorg-x11-drv-catalyst xorg-x11-drv-catalyst-libs
All are at version 11.2 and release 1.fc14. I also caught that the guide was would have me specify the 32 bit version of xorg-x11-drv-catalyst-libs rather than the 64 bit version I needed. I dropped the specification entirely and let yum sort out the architecture.
[code]...
View 2 Replies
View Related
Jun 1, 2011
I'm using OpenSUSE-11.4+KDE and have not been able to access my Sansa Express drive. I can pull it up part way, but it acts as read only. I'm not sure what settings I may need to make in the Partitioner to fix this.If I boot into a LiveCD of LinuxMint10-KDE and plug it in it is instantly identified as a "Media Device," and I have access into the MTP section of it I believe.
I prefer using Banshee, but will use Dolphin to manual drop files it I can get the Sansa drive to operate as with Read+Write. I've seen this device listed here at "plug and play" [URL]../HCL:Gadgets#Media_Players
View 2 Replies
View Related
Oct 30, 2010
I just installed Kubuntu 10.10 to find out I cannot access the grub menu. I tried alt+f2 but that didn't work. What the real problem is is that I am trying to get the display to turn on at boot since it automatically goes to sleep at boot and cannot be woken up. I could set "nomodeset" for the live cd and it would work fine but I can't find a way to do so when Kubuntu is already installed. Does anybody know how to access the grub menu or how to stop the display from sleeping?
View 2 Replies
View Related
Jan 24, 2011
I have the Fedora 14 64bit Live CD on a 4GB USB Flash drive, via Live-USB-Creator. I have bootcamp installed on my Macbook Pro (5,5) with OSX, Windows 7, and Ubuntu already installed. I plan to install Fedora over the Ubuntu.
1.)So, when refit boots up, I choose the EFI USB (Fedora) and the Fedora screen comes up.
2.) I click any key to dismiss the auto boot
3.) I click "e" to edit the Fedora kernel, then I edit the first option and add the line "nomodeset"
4.) I press enter, and then "b" to boot that line. The screen kind of goes whack and a fair amount of super small (unreadable) text comes up on the screen and then just hangs with the blinking (_)
If I go into Grub via "c", and type in "nomodeset" it gives me an Error 27 Unrecognized command. And I've read online to press TAB to go into grub, but TAB does nothing for me.
View 4 Replies
View Related
May 1, 2010
Following the instructions in this post I'm able to boot and work using the live-cd option (Try without installing). The trick is, of course, adding 'nomodeset' to the boot sequence.
Now, my problem is to add 'nomodeset' to the "normal" boot sequence - the one on my hard disk. I'm running Ubuntu on an LG E300 with ATI Radeon Xpress 1250.
View 4 Replies
View Related
Jan 25, 2011
Is there any way of making nomodeset permanent one has to reinstall? I know at least 1 distro has an etc/sysconfing/kernel file you can edit to make the value NO_KMS_IN_INITRD=yes
then mkinitrd makes nomodeset permanent Otherwise its a real bind to have to keep burrowing into the grub2 menu each time to make sure it loads.. :>(
View 2 Replies
View Related
