OpenSUSE :: System Time Is Always Wrong After Reboot?

Jan 2, 2011

Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.

This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.

I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:

Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin

[Code]....

View 1 Replies


ADVERTISEMENT

OpenSUSE :: System Time Is Always Wrong After Reboot

Jan 6, 2011

Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.

This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.

I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:

Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin

[Code].....

View 9 Replies View Related

Hardware :: Hwclock (BIOS): Time Set Wrong During Shutdown And Also Reboot?

Nov 15, 2010

System time was drifting ahead increasingly for several days time in the end. This is what I did with the clock about 6 hours "in the future":

Quote:

sntp -P no -r pool.ntp.org
hwclock --systohc

i.e. I got the (more or less) exact time from the time server and set the hardware / BIOS timer with this value.I renamed "/etc/adjtime" to beginn with a clean slate. During reboot (shut down phase) I noticed a message saying something like: "hwclock set to system time". I checked in the BIOS and there was a new time about one hour early(!). The boot phase then reset the time again, this time several hours forward (usually two to six hours). This is an iterating process, with a net gain of several hours per boot. It is not always whole hours -- like in a time zone error but it involves also minutes. System is set to UTC as affirmed by the "date" command. What could be the cause of this behaviour of the clock / timer?

View 14 Replies View Related

Ubuntu :: System Time Is Wrong All The Time?

Apr 29, 2011

I installed Ubuntu inside windows(Win 7).Both works good.I found that system time is wrong in both OS.Every time i Change it manually but it changes again on reboot!

View 3 Replies View Related

Ubuntu :: Change Data On Location? System Time Always Wrong On Re-boot

Mar 30, 2011

when I installed Ubuntu 9.10 I put in one time setting but it was wrong, and now I don't know where to change it. I tried to change the time preferences, but on reboot I am back to the wrong time.

I know the data is in there somewhere and I can change if I knew where it was.

View 3 Replies View Related

Ubuntu :: Every Time I Try To Reboot System It Hangs

Mar 21, 2010

I am using Ubuntu 9.10. Every time I try to reboot my system it hangs. Shutdowns work properly. I've done multiple re-installations. Nothing I've tried fixes the problem. Does anyone have any suggestions?

View 4 Replies View Related

OpenSUSE :: Can Only Start Firefox Once Have To Reboot To Get It Open A 2nd Time

Aug 28, 2011

I will open firefox then scroll to file-quit firefox, firefox closes fine but when i want to open firefox again it wont, i have to restrate opensuse 11.4 linux 2.6.37.6-0.7 kde 4.6.0.0.

View 3 Replies View Related

OpenSUSE :: When I Set The Timezone To Europe/UK The Date/time Are Correct UNTIL Reboot The Laptop?

Feb 25, 2010

I just installed OpenSuse 11.2 3 months ago on my laptop. I'm running with the Gnome Desktop. I live in Chicago and am currently in London. When I set the timezone to Europe/UK the date/time are correct UNTIL I reboot the laptop. After reboot if I type in the 'date' command it shows the time at 6+ hours from London time. When I check the hardware clock 'hwclock' it displays the correct London time. I check the time setup with yast and it shows the correct Timezone but again shows the 6+ hours difference. I change the time in yast and and my applications ( e-mail) display the correct local time again... UNTIL I reboot and then I'm right back where I started - wrong local time ! I suppose I could write a little startup script to do a 'hwclock --hctosys' but I thought I'd check here first to see if anyone out there had any ideas..BTW - I hate to say this but on the same laptop running XP I don't have this problem AND I didn't see this problem in OpenSuse 10.3 or 11.1

View 9 Replies View Related

OpenSUSE Install :: Time Wrong In XEN Kernel But Right In Desktop Kernel?

Feb 11, 2010

I have a system running openSUSE 11.2 with Desktop and XEN kernel, as well as Windows 7 (not by choice though...). I have noticed a strange time issue, with Windows 7 and the desktop kernel the time is correct (like for example now: 1:32 PM) but in the XEN kernel it is ahead several hours (6:32 PM). If it was an issue between openSUSE and windows then I would think that it is a problem with the system clock but I don't know what would cause a time issue between kernels like that.

View 6 Replies View Related

OpenSUSE Install :: Reboot Directly To Another System?

Jul 7, 2010

in a previous version of openSUSE (I think it was v10.3), there was a possibility to directly/automatically start another OS after exiting (rebooting) openSUSE. This could be done through "right-clicking" on the Reboot (Restart) button from the KDE's log-off dialog and choosing the OS you wanted to be started after the restart. Please, does anybody know if this is possible in openSUSE 11.2 (KDE 4.4)? PS: I know that GRUB enables that, but I prefer a "GUI way" rather than using command line and editing configuration files

View 4 Replies View Related

Fedora :: Clock Gives Wrong Times When Reboot

Aug 24, 2009

So every time I reboot into Fedora11 the clock is wrong.Any idea what might be causing it to keep resetting and what I can do to correct the issue?

View 6 Replies View Related

OpenSUSE Install :: System Reboot Fails During 11.3 Installation

Aug 3, 2010

I am trying to update my OS from Opensuse 11.2 to 11.3 using the installation DVD (checked OK). Everything is OK during the installation process until the message "System is going to reboot" is displayed with a countdown : when the countdown is finished, the screen becomes black and the screensaver starts, but the system does not reboot. When I reboot manually, after selecting "Opensuse 11.3 desktop" on the first menu, the screen becomes black and the screensaver starts.

So the installation seems incomplete and I do not know how to finalize it. When I select the failsafe option on the first menu, it seems to work but some behaviours are quite "strange"... When I choose update instead of installation at the beginning, the behaviour is the same.

I do not know if it is linked but the firmware tests started from the installation DVD show the following errors :

Memory tests are OK.

View 5 Replies View Related

OpenSUSE Install :: File System Is Corrupted After Every Reboot?

Nov 21, 2010

Recently I installed openSuSE 11.3 x64 on PC with Intel motherboard, 4GB RAM & two of 1TB WD RE3.Of course I set RAID1 during installation After some struggle with GRUB which pointed to wrong devices after installation I started to work. But suddenly I found that file system is corrupted after every reboot (It does not depend on what I use and what the way I use - reboot, shutdown -r now or even just poweroff - everything follow to:

Starting MD Raid mdadm: /dev/md2 has been started with two drives
mdadm /dev/md3 has been started with 2 drives
mdadm /dev/md4 has been started with 2 drives
mdadm /dev/md5 has been started with 2 drives

[Code]...

View 7 Replies View Related

OpenSUSE Multimedia :: After Setting Nomodeset Cannot Reboot System

Jul 23, 2010

I have an Nvidia GT9600 card and want to load the Nvidia drivers. As per the 1 click install I set nomodeset and installed the drivers from 1 click. On reboot, well there was'nt a reboot just got a blank monitor, no BIOS screen, nothing. After stuffing around with my system for about 1 hour clearing CMOS and unplugging and re-plugging just about everything I managed to get my system back.I do not like the New Neuoveaux (or however you spell it) Graphics drivers, get some wierd artifacts on my monitor?

View 3 Replies View Related

Debian Configuration :: Wrong Name For The Wireless Card On Reboot

Feb 17, 2016

A couple of days ago I asked why my pc changes the wireless card name.It switches between AR9285 ( right) and AR5008 ( wrong). Well, it is not the case. When system identified with AR9285,it loads ath9k and I can connect to the router. When system identifies my card as AR5008, no kernel module is present at all ( lspci -k). The wrong card name occurs only when system rebooted. If I gracefully shut down the system, it always comes up with a right name for the card( AR9285). So, how to force the system identify my card right no matter if I reboot or shut down?

View 1 Replies View Related

OpenSUSE Install :: Error Loading Operating System On First Reboot?

Jun 29, 2011

Installed 11.4 on a machine with two SATA drives which had previously been running Windows 2003. I deleted the Windows partitions and created a new partition scheme: Swap, root and one additional partition on the first disk, one large partition on the second disk. Install runs fine but upon reboot I get "Error loading operating system". Booting off a Windows floppy and running FDisk shows that the root partition is marked as active.

View 7 Replies View Related

OpenSUSE Install :: Login As Root In Terminal To Restart/Reboot The System?

Jan 28, 2010

I added a whole slew of apps to my favorites and lost the 'Shutdown' option...every time I try to shutdown in the Terminal I am told I must be logged in as Root to do so...I can't figure out how to do this I'm a newbie to Linux but a CNE 5 -haven't used it 10 years- an MCP and A+ certified I've searched local help and SuSe's site and I can't find anythingI've only spent a couple of hrs on this and have had SuSe 11.2 installed since last Sunday

View 9 Replies View Related

OpenSUSE :: How To Understand System.time

Mar 29, 2011

(inside R) I am using system.time function to measure the execution time of two functions

> system.time(lapply(seq(1:1000000),returni))
user system elapsed
0.982 0.100 1.057

[code]....

View 3 Replies View Related

Ubuntu :: NTP Time Zone Wrong?

Mar 19, 2011

since the upgrade tzdata (2011c-0ubuntu0.10.04) to 2011d-0ubuntu0.10.04which I installed on Saturday, ntp updates seem to put me in GMT time.I've switched to manual time settings, as it does horrific things to my mythtv database!I'm not sure if its the upgrade, or the ntp time servers. My timezone is Australia/Tasmania.

View 2 Replies View Related

Ubuntu :: Clock Time Is Wrong At Start-up?

May 30, 2010

Everytime I reboot Ubuntu,the clock is behind by two hours and needs to be manually set. Is there a way to fix this?

View 6 Replies View Related

Fedora :: Can't Start Because Last Mountpoint Time Is Wrong

Jan 25, 2011

I noticed today that my F13 date was one month out i.e October 30th instead of September 30th.Time was okay. I tried to adjust it manually but no success. Now if I try to start up I get to the first blue screeen but then it says something like "last mountpoint date was October 30th = now September 30th which is in the future" (not exact wording). Time zone is correct and not set to network time or UTC. I'm dual booting with WinXP and date and time is correct and Time Zone is correct. System time is correct. So now to get into F13 I have to manually set the system time to 30th October.Which is OK for the 1st reboot but reverts back to the correct date on the next reboot. WinXP boots ok.

View 2 Replies View Related

Ubuntu :: Clock Time Is Wrong At Start-up

Mar 22, 2011

Pretty much what the title says. Everytime I reboot Ubuntu,the clock is behind by two hours and needs to be manually set.

View 9 Replies View Related

OpenSUSE Install :: After A Fresh Install Of 11.4 X-system Comes Up With The Wrong Screensize

Mar 15, 2011

After a fresh install of Suse 11.4 X-system comes up with the wrong screensize 1680X1200.
Instead I need 1600x1200. How can i set permanently the screensize I need ?

View 8 Replies View Related

OpenSUSE Install :: System Time Advancing With Each Boot?

Aug 15, 2010

For some reason, every time I shut down and reboot my machine, the system time advances four hours. The local time here is EDT (-4hrs UTC). I have it set correctly in Yast and have the 'hardware clock is set to UTC' checked. However, for some reason, the next time I boot, the system time will be ahead four hours.

View 7 Replies View Related

Fedora :: System Fonts Wrong Until I Select System-Appearance Menu / Resolve This?

May 23, 2010

This is a bit of an odd problem that's been happening to me recently. My home folder is a version of Fedora old, I've been using the same one between Fedora 11 and 12 (which I'm now using).

When booting up, I notice that my system fonts are not the ones I have manually set. They're the ugly version, whatever exact font it is. It's only when I select System->Appearances from the menu that the system seems to detect my seletions to use Liberation fonts in all areas, and then everything instantly switches to the more visually pleasing Liberation fonts. This is a strange bug, I was wondering if anyone has experienced this or can point me in the right direction?

View 5 Replies View Related

Fedora :: Clock - Boot Into To 12 Time Is Wrong But Not In Windows

Oct 29, 2009

I'm running windows 7 and the F12 Beta (although the same issue existed in my f11 distro) on an asus g71 bb. When ever I boot into windows my time is correct. If I boot into to F12 my time is wrong. Usually by 4 hours. If I change it in Linux when I boot into windows I end up switching the time on my windows partition. I tried searching the forum (rather casual I'll admit) and couldn't find any solutions.

View 10 Replies View Related

Ubuntu :: Daylight Saving With Maverick - Wrong Time?

Nov 11, 2010

I recently updated my Lucid to Maverick. I am running ubuntu on Lenovo Thinkpad w500. I am facing problems with day light savings. I changed couple times to reflect the correct time. Inspite of my correction, it is still displaying wrong time. Attached is the image of my error.

View 2 Replies View Related

CentOS 5 Server :: Wrong Time On Logs By Sendmail?

Feb 22, 2009

I have this server that runs Tomcat . this server sends mail with localhost as MTAthe local MTA is sendmail (with the default settings) . from time to time i have this strange thing and the emails it sends never reach the destination. the log shows it left the server , but looking at the logi see that the time on the log is wrong . sometime its correct and ometines its +2 hours. i guess this email are bounced at the destinationfor sending at future time . all this email that didnt reach the destination have this in common

Feb 22 15:47:44 BE00 sendmail[12969]: n1MDlikZ012969: from=<support@example.com>, size=5912, class=0, nrcpts=1,
msgid=<5269969.391235310464949.JavaMail.tomcat@BE00.example.com>, proto=ESMTP, daemon=MTA,

[code]....

View 3 Replies View Related

Ubuntu Multimedia :: Rhythmbox Time Tags Wrong Using EasyTag?

Jan 31, 2010

I just used EasyTAG 2.1.5 under Ubuntu 9.10 to update the tags on my music files running on Rhythmbox 0.12.5, and now Rhythmbox shows that the runtimes (Time) of dozens of my mp3's are now 27:03:11. That means Rhythmbox thinks all those songs are 27 hours, 3 minutes, and 11 seconds long, which they are not. Some are now shown as 54:06:23. So far they are all playing correctly, but the slider at the top of the Rhythmbox window barely moves, making it difficult, if not impossible, to jump to different points in the songs. Nothing else seems to have been affected.

View 1 Replies View Related

Ubuntu Multimedia :: Wrong Time Duration After Concatenating Mp3 Files?

Nov 5, 2010

I have the following problem;When I concatenate several mp3 files the time duration is falsely detected by Rhythmbox when I open the newly created mp3 file. VLC Player however detects the correct time duration. I tried two ways of mergen the mp3's and both have the same falsely result. - mp3wrap- catI currently fixed it by opening the mp3 in VLC player and converted it again to a mp3 file which resolved the issue at hand. However this is not a solution I would like to have, nor a answer to what is the cause of the problem.So my question is simple -- what is the issue with the mp3 file and why is Rhythmbox indicating a falsely time duration?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved