I am using Ubuntu 9.10. Every time I try to reboot my system it hangs. Shutdowns work properly. I've done multiple re-installations. Nothing I've tried fixes the problem. Does anyone have any suggestions?
View 4 RepliesWhen booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.
View 7 Replies View Relatedtoday i installed nvidia graphic card drivers for fedora13 using yum, after giving reboot command the system hangs during bootin.
View 1 Replies View RelatedHaving a problem with my system hanging after updating Fedora 12. Here are my system specs:
Gigabyte MA770-UD3 motherboard
AMD Phenom 9950 Quad Core
6 gig Corsair DDR 800
1 x 160 gig SATA (OS)
1 x 500 gig SATA (data)
I have my system configured for dual boot with Windows 7. After installing F12, I can reboot with no problem. However, after I install the kmod-nvidia drivers, my system hangs on reboot. If I press any key on the keyboard, it will start to load, the freeze until I press a key again. I have tried both Fedora 12 x64 and i386 with the same results. Here are the steps that I took to install the kmod-nvidia drivers code...
Does anyone have any suggestions as to what I am doing wrong?
Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.
This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.
I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:
Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin
[Code].....
Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.
This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.
I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:
Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin
[Code]....
My system hangs at boot time when loading hardware drivers for about a minute. It hangs here:
Code: dmesg
[ 8.196035] udevd version 124 started
[ 8.533233] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[code]....
My system hangs at boot time when loading hardware drivers for about a minute. dmesg
Code:
[ 11.865604] iTCO_vendor_support: vendor-support=0
[ 11.888580] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[code]....
I started out with Kubuntu RC, then installed ubuntu-desktop and updated all the way to the current state of packages.Anyway, from the moment I installed the RC, from time to time the boot splash appears, the dots light up/turn off and then the booting hags. No key seems to work.I the do a hard reset and everything works just fine.As not to open another thread:- how can I see the Ubuntu splash screen? (currently I can see the Kubuntu one)- how can I turn the splash off and have it boot in text mode?
View 3 Replies View RelatedMy old laptop has a broken screen. I tried using an external flat screen and win-xp would not run this screen. This is how I came to learn about Ubuntu. I loaded Ubuntu 9.4 and the computer worked with the external screen. The only problem was that during the boot process the (kernel text?) the white text on black screen over ran the edges of the external screen. Once the Ubuntu was loaded the window fit the screen perfect. Now my new problem. After a year of perfect use, the battery ran down and the computer shut itself off.
When I put the charger back on and rebooted the laptop, the ubuntu partly opens then hangs up on the kernal (white text on black screen) because of the screen overrun problem I can not read the text. I can boot still boot from the 9.4 CD. Is there anyway I can correct the problem by re-installing 9.4 but not wiping out my person data and files. In other words is there any way to repair the O/s that is defective, without losing my work?
I am running 9.04 Server (standalone). It had been running fine since I installed in last autumn. Upon reboot, fsck of the root filesystem was forced and it hangs at the same point (16.5%) every time. I was able to break out somehow with cntl-alt-del but the boot was to a read-only filesystem. So I couldn't disable the forced fsck. Instead, I tried to fsck there. It started, but hung. I couldn't do e2fsck -v as it needed the device and, although I worked on UNIX systems for decades, I am not familiar with the /dev/mapper stuff.
Looking at other threads, all involving the desktop GUI Ubuntu, I tried some of the suggestions. Went into the BIOS to see what I could disable. I killed the serial port and similar. (Some said that onboard modems interfered with the checks in /dev.) I also tried to boot from my original installation disk. That does work.The suggestion is to choose "Try without any change to your computer". The problem is that is not available on the server installation, apparently only the desktop (GUI). I had install, check CD for defects, test memory, boot from first hard disk, and something like repair or recover a broken disk. I started the last of them, as it seemed to be the only option. It failed because it couldn't get a dhcp address. I could manually configure it (as it is hard addressed anyway), but I didn't want to start screwing up configurations not knowing where it was going, whayt it would ry to do, and risk losing months of hard work.
Without help, I think I will be forced to install the OS on a second drive, use that install to fsck the original filesystem on the original disk, edit the fstab (or whichever has the config) on the original disk to disable fsck, and return to the original boot.I am building this server for a nonprofit and have put in many hours writing mysql/perl apache cgi code for them as a free service and hate to lose it all and set back everything.
I'm on an HP Pavillion dv1000 laptop. I used a live CD to install Ubuntu 10.10 to an external USB hard drive. The install completed successfully, but after a reboot I am stuck on a black screen with a white cursor. Before that I see nothing but the initial HP startup screen. I am able to run the live CD without problems, and I have been running Ubuntu from a 4GB thumb drive (which I installed on using the same live CD that I used to install on my current external hard drive). I had no problems whatsoever running from the CD or thumb drive, so I can't figure out why the external hard drive would be so different.
View 7 Replies View RelatedComputer hangs and sometimes won't reboot.
When it hangs I have seen this message a few times:
o[4348] EXT3-fs error (device sda1) ext3_get_imode_loc : unable to read inode block_inode = 14720620 block = 58753255
Also when the machine boots up I get a message saying something about IOMMU should be set in BIOS, but I can not find any such setting in BIOS. I do not know if this is related to the hanging.
I thought I had a hard drive problem at first so I tried a different hard drive. Same problem.
The mother board is an ASRock N68C-S.
One other thing, where is the file located that boot up messages are written to?
fedora 14 did an automatic update and on reboot it hangs displaying the "f" before the login menu. The "f" is how I now feel......... I do "fn+f2" as it is booting and it displays the sequence of loading items which report all is "ok" until it gets to "jexec services" and then it hangs. I beleive the "jexec service" is a Sun Java item but I am not sure. I have been using Fedora successfully for a number of months and need to get data from the machine.
View 7 Replies View RelatedHave openSUSE 11.1 and (AFAIK) KDE 4 on an older notebook; worked OK for weeks, then booting became a problem and the OS seemed to go to sleep between keystrokes: now the cursor stops blinking, the clock stops running, and nothing happens after clicking a radio button until the mouse moves. Am now 25 minutes into a reboot, hung at "Unmounting file systems" but it also hung for a while when changing run levels. Is this related to the stability problems with 11.1 I've read about? Possibly KDE? Where would I adjust a config to use kde 3.5 rather than 4?
View 9 Replies View RelatedI have Dell Studio 540 desktop and Debian Lenny installed on it:
2.6.26-2-amd64 #1 SMP Tue Mar 9 22:29:32 UTC 2010 x86_64 GNU/Linux
The problem is that I can't reboot it. It just hangs after "Will now restart" message.
I've already tried: reboot=b, reboot=a, reboot=h kernel options.
Additional info (I can provide any other information):
lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
[Code]....
The server hangs or reboots when I install Fedora 13 x86 (32-bit) from DVD onto a quad core server (64GB of mem, 16 cores). Sometimes it gets as far as starting anaconda before the hang or reboot. I've been trying different combinations of kernel options, such as vesa, pci=msi, irqfixup, max_add=3072M, noapic, nolapic, noirqbalance, maxcpu=2...
But whatever I do, it hangs or it reboots. The 64 bit versions of RHEL5.5 and RHEL 6 Beta2 installs without problems.
I installed Ubuntu in my PC alongside winXP. I downloaded the ISO and mounted it using a virtual image software (PowerISO used in winXP). I installed Ubuntu using wubi in a 20GB partition. During installation it asked me how much space should I give, I gave it 11gb. Everything went fine. I rebooted but now the computer hangs during startup. I went to verbose mode to see what the error is and found out that everything is ok. The last line that apears is "Setting sensors limit [OK]" and then nothing happens. I have tried every option (safe graphic mode/ demo mode etc etc) but the computer hangs.
View 1 Replies View RelatedI am running my Ubuntu 32 bit server on top of Windows 7 64 bit with VirualBox. It's a 2 core Atom. It's been working good for about half a year. But the last about 6 weeks the system time only in Ubuntu is going slow. About -8 per 24 hours! I can only guess because I have more things running in my Windows 7 and Ubuntu.
I can set it right by coping the hareware time to system time with this command:
Code:
hwclock --hctosys
I want to run a crontab to have that command run every minute. But it don't seem to run.
[Code]...
i have been using F10 and before that F8, so after release of F11 i couldn't resist to install. system specifications are:Intel Pentium D 2.8 GHzRAM 512MbHDD 80Gbthe only problem is that it ceases and it's unexpected. sometimes i loose my work although it is not of much importance but it is that way.for initial few times i hoped it as a bug. but i think it is not.i love Fedora i looking forward to use it.only my mouse is moving all others locks up.one thing i used "unexpected" because it all happens regardless of any specific applicationor any time duration.all i need after it happens is to restart manually using restart button.i don't know whether my graphics driver is right or not?graphics seems right but during scroll it doesn't looks good.
View 6 Replies View RelatedJust making one last tweak with my fresh install of F12KDE. I need to . How do I do this
View 2 Replies View RelatedWhenever I reboot my server, it looses all network connectivity. It can't see the LAN nor the internet. I have to issue the following:
Code:
ifconfig eth0 down
ifconfig eth1 down
ifconfig eth1 up
This will get the server talking to the LAN, but still not to the internet. To get that I have to do:
Code:
route add default gw 192.168.0.1
Then I'm up and running.
But why?
Granted I only have to reboot now and then (after a power failure, or, like last night where the server was actually heating the house too much on a hot August day) but why is this happening? It is like these settings are temporary and are lost on shutdown.
Is there a way to determine the time of last reboot and open all sessions and/or files that were open with a BASH script?
Oh also on this topic, does anyone know where a good repository of BASH, PERL and other Linux System Scripts are?
I'm just wondering what the limits for time are. I have a program that always takes exactly 20 ms, so I assume this is the lowest it can measure, but I want to see if there's some sort of documentation of this.
View 3 Replies View Relatedget the values for the user time and system time for a process.i have tried getrusage to get values of ru_utime and ru_stimebut these don't seem to be correct
View 3 Replies View RelatedI've got the last Debian stable release, the amd64-DVD-1 file , and copy it to my USB stick, using win32diskimager, as recommended in the installation guide.
It seems to go all fine, but when I rebooted, after entering the passphase it started a fsck "from util-linux 2.25.2", then it says:
"/dev/mapper/Debian-root: clean" and stuck there. i gave it quite a bit of time, tried to reinstall it and also got into the rescue mode of the installer,
The desktop stops working, the panel stops working.. but compositing, desktop cube etc all work fine.I can still launch a program with Alt-F2.When I try and kill it (to restart) using 'killall plasma' / 'kill -9 <pid> / 'kill -15 pid' from a terminal, nothing happens, the process keeps running. If I leave it for about 30 mins it suddenly dies, allowing me to run 'plasma' from a terminal - then everything is back to normal.
If I log out and try to log back in again, I get a black screen. Only way to fix it is either to kill it and wait for 30 mins or so, or totally reboot the computer.Tail of the xsessions error file:
Code:
[/usr/bin/nepomukservicestub] Removing connection
[/usr/bin/nepomukservicestub] Removing connection
[/usr/bin/nepomukservicestub] CLuceneIndex::close in thread 3086616432[code]....
I'm trying to install F12 on an iMac G4 (ppc). I partitioned the HD with OS X (10.4.11) on a 50 GB partition, left the remaining 26 GB free, then ran the installer. Everything seems to run very smoothly until it hits this package: sendmail-8.14.3-8.fc12.ppc. Then everything freezes. After this happened twice, I pulled a few applications out, thinking it might be a space issue, but it hung in exactly the same place next time. The install DVD passed the media check at the beginning of the install. Is there a way I could keep this package out of the install and, if it's needed, pull it in from the repositories later?
View 2 Replies View RelatedAfter some idle time Slackware hangs up/freezes. When, for an example, i turn on music i can hear it on idle time but after some time music still plays but i'm losing picture (monitor detects no signal), num lock is locked, led on keyboard are turned on but won't turn off while pressing num lock. I've switched off power saving options in Slackware and on bios setup.
My spec is:
X4 620 (without overclocking)
AMD 760G (Radeon HD 3000)
Catalyst 11.5 for Radeon graphic.
BTW - computer works fine with Windows. Also, with Slackware i can work for an hours, many hours and everything is fine but as soon as i leave it for some amount of time = it hangs/freezes. There is something wrong with hibernation. Not always computern is turned off correctly. TV is switched off, slackware logged off but i hear drives working and cooler fans. It should be switched off completly.
I installed Ubuntu inside windows(Win 7).Both works good.I found that system time is wrong in both OS.Every time i Change it manually but it changes again on reboot!
View 3 Replies View Related