OpenSUSE Install :: System Reboot Fails During 11.3 Installation
Aug 3, 2010
I am trying to update my OS from Opensuse 11.2 to 11.3 using the installation DVD (checked OK). Everything is OK during the installation process until the message "System is going to reboot" is displayed with a countdown : when the countdown is finished, the screen becomes black and the screensaver starts, but the system does not reboot. When I reboot manually, after selecting "Opensuse 11.3 desktop" on the first menu, the screen becomes black and the screensaver starts.
So the installation seems incomplete and I do not know how to finalize it. When I select the failsafe option on the first menu, it seems to work but some behaviours are quite "strange"... When I choose update instead of installation at the beginning, the behaviour is the same.
I do not know if it is linked but the firmware tests started from the installation DVD show the following errors :
Memory tests are OK.
View 5 Replies
ADVERTISEMENT
Jan 26, 2010
This system has AMD Turion with ATI HD 3200 Graphics system. Installation program correctly initializes graphics - all installation completes with automatic configuration - gives no option for sax2 to run. Then Suse does not comes up or the x does not comes up or display is not showing anything. I can switch to Vista and Vista boots works from grub menu. How can I test and configure graphics and monitor before installer boots the system?
View 1 Replies
View Related
Apr 26, 2009
I've got a RAID5 array that doesn't want to automount after rebooting. I'm pretty familiar with linux, RAID, and mdadm, and up until now, I've had the RAID5 array working just fine. However, whenever I reboot, the array drops off and won't remount until I manually assemble and then mount the thing. I find this odd because I had everything automounting just fine back in 10.3, and even in 11.0 (I think - not sure on that). Currently, things are working, but I'd really like to not not have to type
Code:
mdadm --assemble /dev/md0 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1
followed by
Code:
mount /dev/md0 /mnt/data every time I reboot. Even including this in some sort of start-up script seems kludgey... Surely there must be a more elegant way of automatically bringing up a RAID5 array after booting? I'm not sure what information you'll need, so I'm going to go ahead and include as much as I can anticipate...
So having already used the commands:
[Code]....
View 9 Replies
View Related
May 18, 2010
I'm installing 10.4 x64 on a Dell PowerEdge R610 in a RAID 1 configuration and the install goes fine until I have to reboot the server to finish the install. On reboot after about a minute it gives the error.We've tried letting GRUB manually configure itself at the end of the install before we reboot and we've also pointed it to /dev/sba partition which is what should be the boot partition.In the code tag it's ALERT! /dev/mapper/mysql(one)-root.... the L and 1 look the same.I've got 3 of these server to get setup and running as part of our back end and network restructuring and have been stuck at this point on the first one since Friday.
View 9 Replies
View Related
Jul 7, 2010
in a previous version of openSUSE (I think it was v10.3), there was a possibility to directly/automatically start another OS after exiting (rebooting) openSUSE. This could be done through "right-clicking" on the Reboot (Restart) button from the KDE's log-off dialog and choosing the OS you wanted to be started after the restart. Please, does anybody know if this is possible in openSUSE 11.2 (KDE 4.4)? PS: I know that GRUB enables that, but I prefer a "GUI way" rather than using command line and editing configuration files
View 4 Replies
View Related
Nov 21, 2010
Recently I installed openSuSE 11.3 x64 on PC with Intel motherboard, 4GB RAM & two of 1TB WD RE3.Of course I set RAID1 during installation After some struggle with GRUB which pointed to wrong devices after installation I started to work. But suddenly I found that file system is corrupted after every reboot (It does not depend on what I use and what the way I use - reboot, shutdown -r now or even just poweroff - everything follow to:
Starting MD Raid mdadm: /dev/md2 has been started with two drives
mdadm /dev/md3 has been started with 2 drives
mdadm /dev/md4 has been started with 2 drives
mdadm /dev/md5 has been started with 2 drives
[Code]...
View 7 Replies
View Related
Jun 29, 2011
Installed 11.4 on a machine with two SATA drives which had previously been running Windows 2003. I deleted the Windows partitions and created a new partition scheme: Swap, root and one additional partition on the first disk, one large partition on the second disk. Install runs fine but upon reboot I get "Error loading operating system". Booting off a Windows floppy and running FDisk shows that the root partition is marked as active.
View 7 Replies
View Related
Feb 19, 2011
I can get connected to the Internet when I reboot the system, but the connection usually fails after within 10 mins. However, even then the network manager says it's connected. Never reconnect, manually or automatically.
View 2 Replies
View Related
Jan 28, 2010
I added a whole slew of apps to my favorites and lost the 'Shutdown' option...every time I try to shutdown in the Terminal I am told I must be logged in as Root to do so...I can't figure out how to do this I'm a newbie to Linux but a CNE 5 -haven't used it 10 years- an MCP and A+ certified I've searched local help and SuSe's site and I can't find anythingI've only spent a couple of hrs on this and have had SuSe 11.2 installed since last Sunday
View 9 Replies
View Related
Oct 18, 2010
I have a problem that I can't login to SUSE in graphical mode. I get to the login prompt; enter my username and password; SUSE starts to do the login but then crashes back to the login prompt. Looking in /var/log/messages doesn't tell me anything useful. However, I noticed that my SUSE system partition is full (at 20 GB). So I think this is the culprit that is stopping my login.
Unfortunately, I can't extend my system partition as it is ext4 (SUSE default) but parted (from SUSE 11.2 live cd) complains that it can't do anything with ext4.
I'm using
OpenSUSE11.2 x86_64
KDE 4.3.5
Linux 2.6.31.14-0.1-desktop
View 9 Replies
View Related
Nov 3, 2010
This was my first experience with Ubuntu, I was told to switch the hard drives on my computer and put the Windows drive in a safe place for the install. The first time I did the install on the hard drive (which was the clean second hard drive that came with my computer), I either didn't realize I believe I didn't realize I had to click a button and thought the install had gotten stuck, and therefore cut off the install midway through. The second time around the install went without a hitch, and I was able to boot to desktop once. There, I was notified that I needed/should install NVIDIA drivers, I believe version 173 was listed as the next most recent drives (the other was "current"), I have an NVIDIA GeForce 7350LE graphics card, and after installing the drivers, I went to the restart menu as directed and clicked restart, not shut down but restart, and there were several listed errors on the text/DOS screen, shutdown errors I believe (the errors were 5 digits and were something like 56759 or something like that, I can't be certain if I'm remembering right, though, but there were two errors going over again). I then proceeded to turn off the computer manually, and upon it coming on again, instead of the normal Ubuntu flash screen before login, a more choppy Ubuntu 10.10 screen popped up and it led me to the DOS mode, where I was able to login, but it did me no good because I don't know command logic for Ubuntu. The best I did (its the best I ever do when these things happen) is get menus to pop up that are basically useless. I turned the computer off and on again three times, and tried booting directly from disk, but that failed.
I'm actually using the same computer I just reinserted the Windows drive back in after the frustrating experience. Windows has been giving me problems itself, and I really wanted to switch to Ubuntu but I need to know that this is a fluke and not the norm. I can live with this sort of thing being so uncommon I must have did something that was very strange and out of the ordinary to my computer. But if its commonplace, I want to know that too, because that's just something I can't live with.
View 2 Replies
View Related
Apr 27, 2015
When I try to install Debian 8 on my laptop I get this rather odd error. The install fails every time. I've managed to get as far as choosing which Desktop Environment I want and the shortly after it shuts off. It shows 4 messages
Code: Select allSystem is going down!
Sending Termsignal
Sending Killsignal
Requesting Machine Poweroff
The machine I'm trying to install on is a Gateway NV53, 4gb of RAM, AMD Athlon II x64.
At first I thought it might be my disc so I burnt another DVD using the 4.3GB DVD image I had downloaded. I checked the disc and it verified with the image and so I tried again with the same results as above. Any clue what might be causing this? I'm sure it isn't my hardware, Arch has been running fine for almost 6 months and never seemed to care.
View 3 Replies
View Related
Nov 18, 2014
I want to try Debian on my Asus Eee netbook and I'm trying to follow the instructions in URL... But just copying the ISO file to the USB drive then trying to boot from it doesn't seem to work. I just get "Missing operating system".
The Eee can use an external optical drive as well but that failed also. I'm sure I need to do more to prepare the USB drive or CD? Can I prepare the USB Drive or CD on my Windows system, and make it boot on the netbook (which has another Linux distro on it now)?
View 5 Replies
View Related
May 17, 2010
I'm installing 10.4 x64 on a Dell PowerEdge R610 RAID 1 and the install goes fine until I have to reboot the finish it. On reboot after about a minute it gives the error
Code:
Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline/
-check rootdelay= (did the system wait long enough?)
-check root= (did the system wait for the right device?)
-Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/mapper/mysql1-root does not exist. Dropping to shell!
what to do and my co-worker who knows a little more about Linux can't get it to let him check any of the above common problems.
We're tried letting GRUB manually configure itself at the end og the install before we reboot and we've also pointed it to /dev/sba partition which is what should be the boot partition.
EDIT: in the code tag it's ALERT! /dev/mapper/mysql(one)-root.... the L and 1 look the same
View 9 Replies
View Related
Jan 9, 2011
I recently decided to install ubuntu netbook remix 10.10 to my Toshiba NB200. I was using windows and I wanted to completely erase them. I burned the USB, I followed every single instruction the site had, and even though the installation seemed to work, and a message to reboot my computer appeared at the end, the installation finally fails. When I reboot, the only thing I get is a black screen with an underscore at the top left corner. I tried the installation four to six times and even tried older versions as well but all I get is the black screen.
View 9 Replies
View Related
Jan 4, 2010
I am trying to upgrade from F11 to F12.Using Preupgrade, everything went well and then it asked me to Reboot. Anaconda started then says something about updating some files then the screen goes blank.
View 14 Replies
View Related
Nov 18, 2009
After successfull installation of Suse 11.2 and reboot i get a Blackscreen. When i try to start with "init 3" its still the same problem, Error Message in Bootlist
"Failed to get NUMA Memory Information from." Suse stops loading after "HAL DAEMON - DONE" and gets a blackscreen. If got a Nvidia Gforce 9400GT Graphic Card, and a Athlon 2 x2 Processor. I loaded the DVD with Bittorrent and Checksume and Burning are o.k/successfull. I also tried to reinstall with ext3 but still the same problem. Are there any known issues/solutions for this Problem?
View 9 Replies
View Related
Mar 29, 2011
I installed Ubuntu 10.10 amd64 (and tried 10.04.2 as well) from Wubi under Windows 7 64-bit. When I reboot after installing it through Windows, I go to Ubuntu and the installation completes. Then it reboots again to finish the install of the OS. When I boot into Ubuntu now, grub does not appear. Instead, some initramfs stuff comes up in a console with no GUI and says some error stuff about root devices. I read that grub updates cause problems, but the installation never finished and therefore I was never able to go into Ubuntu to lock grub packages, etc. I've run into this error on multiple fresh installs.
View 1 Replies
View Related
May 9, 2011
I wanted to update my 11.3 installation to 11.4. Everything went fine, but at the point the installation switched to the installed new system, it went completely wrong. This is the first time after more than 15 years of using (open)SUSE I have got trouble to install a new version.
What went wrong: the display shows some hundred miniature thumbnails of the screen to continue the installation. Only possibility was to switch to a console session. I did change the settings in initrd to NO_KMS_IN_INITRD to 'yes', then rebooted the PC. But the display is still unusuable. Then I tried the failsafe option, without any success. So I had to re-install the previous version, where I don't have this troubles. Fortunately, I made a backup of most of my settings, but it takes me still a lot of time to re-install everything, as I have to re-install a lot of libraries and recompile some programs.
I did a try with a live-DVD of Knoppix, the display is also scrambled but not so bad as with 11.4. Then I tried a live-CD of Kubuntu, and there anything worked PERFECT!
If openSUSE cann't give me a valuable explanation and solution, I have to consider to switch to Kubuntu after more than 15 years of openSUSE.
Some details of my hardware:
- graphics card: nVidia GeForce 6150SE
- driver: nouveau
- display: Acer HD 24inch screen with a resolution of 1900x1080
Remark: with the installation of 11.4 on other PC's of friends and family, I didn't have troubles, but they don't have such a high-resolution display.
View 4 Replies
View Related
Apr 14, 2011
I Just installed OpenSuse 11.4-32 bit with KDE 4.6 on my PC. At first boot everything was working, then I added the community ATI/AMD repository to get the drivers for my ATI 5570, but after reboot i got a blank screen. So I ran the "failsafe mode" in the boot menu, it worked (3D accel. as well), but just for the root user. To make it work for the non-root user had to set the setuid bit for /usr/bin/Xorg. (is it ok to run xorg with superuser privileges?) Then I tryed to understand wich is the kernel option actually needed for X to start, and after a few attempts I realized the only option really needed is the "nomodeset". what is the nomodeset option for? and why I need it to run in the graphic mode?
View 9 Replies
View Related
Jul 1, 2010
I'm installing openSUSE 11.2 on a notebook from DVD + locally mirrored update and kde4 buildservice repositories. This usually worked fine, but this time, the installation always fails at about 89% while installing some package, whose name I can't find out. Its script fails with error 127, the error message blocks access to the log.
Is there a way to continue the installation process afterwards, instead of always trying to reinstall and hoping to find out the name of the failing package?
View 3 Replies
View Related
Jul 7, 2011
I am trying to install openSuSE 11.4 on my IBM xSeries 440 Server and I am not having much success. I am getting to the welcome screen and installation menu screen fine, but when I select the 'install' option it loads the Linux kernel up to %100 and then just goes to a black screen from which the only escape is a reboot, the same thing happens when I select 'check installation media' and 'Firmware test'. I have tried the 'no ACPI' and 'safe settings' setting and still no luck.
I have successfully installed Windows server 2003 Enterprise edition on this machine so I know the hardware is ok.I suspect it could be a driver issue, but as I am very new to Linux and server installations I am grasping at straws.
View 5 Replies
View Related
Feb 9, 2010
i have a system that consist of fedora and xp which is dual boot configured, every thing is fine .when i tried to install deepofix mail server ,it prompted to select entire hard drive or existing partition(free space) when i selected option as free space, suddenly it showed "installation is complete reboot the system " yet i have to configure a lot more things such as network,ip,dns. i dont know what is the problem .Nothing is installed after that ,the same process repeats every time, when i try to install. Still i have 8gb free space in my disk
View 1 Replies
View Related
Dec 10, 2009
After trying to install and partition with a live CD I restarted the PC and What do you know it reads Starting Windows 7 , Opensuse installation Completely Gone Wasted like it never even took place , and it left a gift a 100 GB less of Space on the HD . at least thats what it reads out ... how to get my full HDD back ?
View 4 Replies
View Related
Jan 27, 2010
Have been running 11.1 on a generic notebook (eRacks) just fine until a few days ago when CUPS couldn't be reached. Rather than futz more with 11.1, I decided to install 11.2 (which has been on my desktop). Using the same CD, which continues to check ok, the install has failed many times at about the same point: 87% through "copying root filesystem" in yast2.
Specs: Intel P4 2.4 GHz, 1.5 GB RAM, ATI radeon PV250Lf
The HD was partitioned into /, swap, /home, and an extended partition of /opt, /var, /usr. Only / was ext4 and the rest were ext3. Tried various options:
* no apic
* no acpi
* "noapic acpi=off" entered manually
* Vesa instead of 1024x768
Each time had to edit partition table to mount the extended partitions. Always formatted /. At first didn't format the extended patitions, later formated all but /home. Then set yast2 to format / as ext3, to match the other partitions. In the sysinfo page the / partition is now shown as /mnt containing 723.6 MB out of 7 GB, still formatted as ext4. On rescan by yast2 partition manager, / shows as ext3. The install halts every time with an error while "copying root filesystem." Tried booting from the CD direct to install and to the Live OS followed by install--same result. So, hours later, went back to 11.1--which installed in minutes.
View 4 Replies
View Related
Dec 19, 2009
I am trying to install 11.2 on a Dell Poweredge 2550 - two processors,all scsi, raid disabled, ATI grahpics. Fails at "failure to mount clich file system" - reboot.
View 9 Replies
View Related
May 6, 2011
I'm trying to install openSuSE 11.4 onto my brand-new Lenovo W520 laptop, using the Intel Rapid Storage Technology (FakeRAID?) controller, ROM version 10.1.0.1008. I have 2 physical 500GB disks configured in a mirror (RAID-1). Everything looks fine, the installation program comes up and asks if I want to use mdadm to manage the RAID, to which I answer yes. I go through the normal setup screens, and select the partition layout that I want (for sake of this post, I'll limit myself to the layout that the system itself recommends).
The problem comes when it becomes time to format the partitions. Somehow the partitioning program gets it into it's head that the root partition is 10TB, not 20GB, and the ext4 partitioning fails in various ways (short reads to sector zero, unable to map using 4096 byte sectors, etc, etc) depending on exactly which partitioning scheme I'm attempting. I pretty much get the same result no matter how I play the partitions, which file systems I use (XFS, ext4, etc [of course, I can't use XFS for /boot...]).
For now I've gone ahead and set myself up using software RAID, since this system is unlikely to become dual-boot with Windows for a few years at least. (As an aside, but as a hint to others, when the installation fails, I end up having to go back into the Intel RAID controller BIOS boot to clear out the entire RAID setup each time it fails - the disks are left in a completely useless state).
View 5 Replies
View Related
May 18, 2011
I'm new to openSUSE, this is the first time i try to install openSUSE version 11.4. on my IBM Thinkpad T43 (on which SUSE Linux version 8.0 has been running before without problems). I have downloaded the ISO images and successfully burned the ISO images on a blank DVD. Having placed my openSUSE DVD in the drive and rebooted my laptop I can see the boot screen.
I then select installation with arrow up/down and press enter. Choosing language and keyboard layout works fine, as well as accepting the license agreement. However, when it comes to 'System Probing' the installation stops at 'Search for system files'. The cursor shows a little turning disk but the rest of the screen is blocked.
View 3 Replies
View Related
Jan 6, 2011
Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.
This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.
I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:
Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin
[Code].....
View 9 Replies
View Related
Jan 2, 2011
Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.
This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.
I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:
Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin
[Code]....
View 1 Replies
View Related
