Red Hat / Fedora :: Unable To Detect HDD When Installing RHEL 5.5 Using RocketRAid 2640x4?
Dec 5, 2010
I have a rocketraid 2640x4 with 2 500gb HDDs configured in my system. I also have a 3.5" usb floppy disk plugged in with the SCSI drivers When I boot the RHEL 5.5 x86 32 bit installer, i type in "linux dd" at the first screen. Then it asks me to load my drivers via the floppy disk which i do. When i get to the installation page of Linux after entering my serial key, it is not able to detect my HDD so i am unable to proceed. I have tried using drivers for RHEL 5, 5.1 and 5.2. There are no drivers for 5.5.
View 9 Replies
ADVERTISEMENT
Apr 27, 2009
I have 4 partitions in my system, out of which two(sda1, sda2) have windows on them. I have installed RHEL 4 32 - bit on sda3 and after that , installed installed RHEL 64-bit on to a partition sda 5. Now i am unable to boot into RHEL 32-bit. The error i am getting is Error 13: Invalid or unsupported executable format.
View 1 Replies
View Related
Feb 9, 2010
I have installed a RocketRAID 2300 card on a computer to have enough SATA ports to build a RAID 5 for redundant storage. The card support�s RHEL and CentOS up to version 5.3 however I�m trying to install it on CentOS 5.4 x86_64 if that�s possible. I have tried every way the user manual list�s to install the card�s driver on a new or existing installation except building the driver module manually into the kernel (I have no experience doing that yet). I am able to load the drivers from the diskette but when I get to the window Update Disk Source, the installer refuses to take the driver diskette. I've gone through the support information on HighPoint�s website, however have found no reference to CentOS 5.4 or anything else that could help me yet. My next step is going to be to downgrade to CentOS 5.3 x86_64 to see if I can use the driver diskette while reinstalling the OS.
Driver installation manual: [URL]
Driver download page: [URL]
My motherboard already has onboard SATA ports to the CentOS 5.4 installer detect and installs the sata_nv drivers but I don�t have access to the RAID card with those drivers.
View 12 Replies
View Related
Mar 10, 2010
I am not getting GUI in after installtion RHEL 5.0
My Mother board: Mercury
Model no1845 gcm
Moniter :LG 15''
View 1 Replies
View Related
May 3, 2010
I want to install Red Hat Enterprise Linux (v. 5 for 32-bit x86) on my Acer laptop? Is this possible? I looked on the compatibility list but it seems that I can only install this OS on a server machine? Is that true?
View 8 Replies
View Related
Sep 17, 2010
I am trying to install gcc from source, but wish to install to an alternative location, ie /opt/gcc/4.4.4.
I have done so but ran into the problem that the system libs in /usr/lib64 were being located before my libs in /opt/gcc/4.4.4/lib64.
So, I set --libdir=/usr/lib and reinstalled. The libs link in correctly, but now g++ cant find includes, for instance <complex>. I think I could set CPATH to point to the locations of these includes but that doesn't seem like it should be necessary.
So my question is, what is the correct way to install gcc alongside the system versions while allowing linkage to the right libs and location of the includes? I don't want to use prefixes or suffixes because the intel compiler looks at gcc -v to get clues as to how to compile stuff.
It should be noted that I have no internet connectivity on this machine, so building from source is my only option.
View 3 Replies
View Related
Feb 24, 2010
I have several RHEL 5 installed on ProLiant DL380, they all can't detect the CD/DVD hard dirve when i insert the CD. Do you now why is that, how can i fix it?
View 1 Replies
View Related
Dec 9, 2010
I am facing errors while installing red hat on directory server 8.2 on red hat linux server. I have executed below written RPM command and getting following error messages:
ls *.rpm| egrep -iv -e devel -e debuginfo| xargs rpm -ivh
warning: adminutil-1.1.8-2.el5dsrv.i386.rpm: V3 DSA signature: NOKEY, key ID 37017186
error: Failed dependencies:
libc.so.6(GLIBC_2.4) is needed by adminutil-1.1.8-2.el5dsrv.i386
libldap60.so is needed by adminutil-1.1.8-2.el5dsrv.i386
libldif60.so is needed by adminutil-1.1.8-2.el5dsrv.i386
libprldap60.so is needed by adminutil-1.1.8-2.el5dsrv.i386 .....
If there any dependent patches/packages that I need to install first before proceeding with the actual DS installation.
View 4 Replies
View Related
Jul 23, 2010
I have a vaio z ( z series) laptop.
I want to install RHEL 5 on it, but media didn't boot in graphic mode,when i was completing the installation steps( all in text mode) at the end I see only a command line ( username logine)
I tried other distributions and other RHEL versions that I have ( for checking my laptop) and the result become fallow in brief:
RHEL 5.3: only boot in text mode
RHEL 5.5: only boot in text mode
fedora 8: boot and install in graphic mode
fedora 8:doesn't boot
fedora 10: boot and install in graphic
oracle red hat enterprise 4.4:boot and install in graphic mode( but I don't like this)
I need only RHEL 5 distribution on my laptop and I check the others for checking my laptop, please answer in simple manner,I'm not an advanced user
View 3 Replies
View Related
Nov 9, 2010
I am installing the quake4SDK on RHEL , it needs gcc-3.3 , but I have gcc 4.1.How can I install an alternative gcc3.3, without getting rid of the newest one , and solely to get this program to compile ??? I know there is an "alternative" managing system , but don't know how it works.
View 5 Replies
View Related
Aug 10, 2009
I have a broadcom 4322 with the broadcom-wl driver on Fedora 11. It worked the first time I used it, and since then is unable to detect any networks. I've tried reinstalling the driver, and it still does not work. Any suggestions?
View 2 Replies
View Related
Aug 3, 2010
I am using fedora 13 and have installed ettercap from Add/Remove Software in Fedora. But when it is starting(Application->Internet->ettercap), it is not able to detect any interfaces ( i am using eth0 interface, wired lan ).
View 4 Replies
View Related
Sep 10, 2010
I run Fedora 13 in Oracle VM VirtualBox. Version 3.2.8 r64453
I did not realize that you had to install Guest Additions but after much reading I finally got it done. After I was done the max size I could go to was 1024x768. Using detect monitors I still get "Unknown" as a result.
I really don't know what else to try as I am not to proficient with the OS. I would like to run it at my monitors native resolution so I can have it on my other monitor. IE: Monitor 1-Vista. Monitor 2- F13
Monitor: Dell 1907FP native resolution. 1280x1024
Video Card: Dual Radeon 4800HD
I thought it might be something with the video card but I can not get the ati drivers to load at all. I have been unsuccessful finding drivers for the monitor.
Ok, so I got really bored and started trying it with other OS's. I installed Ubuntu and after I added the User Additions I was unable to get anything over 1024x768. Fedora is still stuck 1024x768. I also installed XP and it works like a champ.
View 2 Replies
View Related
Feb 12, 2011
I want to install distro directly from isoand came to know that this can be done using grub2so ,i installed grub2 in fedora 14 andIn /etc/grub.dpasted the following lines in
40_custom
#!/bin/sh
echo "Install" >&2
[code]...
View 1 Replies
View Related
Mar 18, 2009
Recently i upgraded my dvd writer from pata to sata, now i install LG sata dvd writer into my system, now my problem is that its unable to detect in my fedora 8 box , but i can successfully boot fedora 8 from this dvd writer.i have a kernel version 2.6.23. solution for this.
View 8 Replies
View Related
Jun 16, 2010
I am not very new to LINUX. I was using UBUNTU for the last 1 year and I have switched to Redhat now because I am thinking of taking a RHCE certification now. Actually the problem is that I am unable to install RHEL 5.2 i386 on my i686 machine, I have bought it recently 1 week ago. I tried to use the boot parameter "linux noprobe" then it said drivers not found after 2 steps when it loads drivers.
When I tried to make a GUI install it hanged after "loading /sbin/loader" and said "kernel panic - not syncing". And when I tried to make a text install it said hanged agin after "loading /sbin/loader" and said something like "Oops: 0000 [#1] SMP". If drivers are needed then when can I get those and how can I install those drivers? here is my hardware information as "lspci" says:
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
View 2 Replies
View Related
Sep 16, 2010
i have rtl 8111/8168b gbe ethernet card. i hav downloaded its tar file from from gigabyte website.......kernel version is 2.6.18-8.el5
View 1 Replies
View Related
Apr 22, 2011
- I am running with Oracle UEL 6.0 (2.6.32-100.28.5.el6) because stock RHEL 6.0 (2.6.32-71.el6 ) has issues with the async I/O driver.
- The test is a high throughput performance benchmark running on Oracle 11gR1
- I am pumping a lot of disk I/O through the system while running with enough users to max out the 8 CPUs, which get to 99+% utilization with RHEL 5.3
- The server is a 4-socket Nehalem EX X7560. Right now, only 2 cores per socket are enabled.
- There are GBs of memory left over. The disk response time of the SSD arrays is around 1ms and the arrays are capable of 4-5 times more IOPS. Same with networking, etc. The testbed is capable of maxing out 32 CPUs with RHEL 5.3 I cannot push the RHEL 6.0 CPU utilization past 95-96%. The same test on all flavors of RHEL from 4.4 to 5.3 can totally saturate the CPUs. It feels like the system is intentionally holding back some CPU cycles.
View 2 Replies
View Related
Apr 4, 2010
I tried to install VirtualBox 32 bit on my 64bit Fedora11 OS. I took the 32 bit version as I want to run a 32bit software. I collected all information I could get from other forums. That's what I did: I downloaded and installed [URL]
yum groupinstall "Development Tools"
/etc/init.d/vboxdrv setup
Now I got stucked with the error Qt WARNING: QGtkStyle was unable to detect the current GTK+ theme. I searched for qt or qgtkstyle on my system and found files containing both but don't know what to do here.
View 2 Replies
View Related
May 17, 2009
I'm trying to compile Rocketraid 2310 driver v2.2 on CentOS 5.3 x86_64 (kernel 2.6.18-128.el5). When I run make I get the following:
make KERNELDIR=/lib/modules/2.6.18-128.el5/build/ ARCH=x86_64
make[1]: Entering directory `/usr/src/kernels/2.6.18-128.el5-x86_64'
CC [M] /root/rr231x_0x-linux-src-v2.2/product/rr2310pm/linux/.build/os_linux.o
CC [M] /root/rr231x_0x-linux-src-v2.2/product/rr2310pm/linux/.build/osm_linux.o
[code]....
View 4 Replies
View Related
May 2, 2010
I have a new F12 install, and my syslog is filling up with messages about USB. I have 2 USB devices plugged in directly to the mobo (bluetooth keyboard receiver, touchscreen), and it keeps redetecting them and then disabling the port for some reason.
A small sample of what keeps on repeating:
Quote:
View 1 Replies
View Related
Jan 28, 2010
Environment: A 32-bit kernel RHEL5.3 system running on a virtual machine. The root(/) filesystem is on an LV.
Issue: Unable to resize the FS after extending the root LV since it is mounted. After extending the LV, online resizing of the FS was not supported and the root filesystem could not be unmounted while it was in use. On rebooting, I got a kernel panic error. In runlevel 1, I couldn't run chroot, couldn't find the /etc/fstab, root FS could not be mounted, fsck did not run (tried block 31 for second copy of superblock using dd count=1 bs=4k skip=31 seek=1 if=/dev/sda2 of=/dev/sda2), couldn't find any rpm on installation media to install unix-utils rpm. On running commands in runlevel 1,
I got the following output.
View 5 Replies
View Related
Oct 23, 2009
I had a fedora 11 on a IDE HDD and a raid 5 with 4 SATA HDD with a rocketraid card 1640 After a crash of my HDD, i try too install a centos 5 on a new HDD and the problem is to install a raid 5 without loosing my datas who are on the raid.
View 1 Replies
View Related
Dec 8, 2009
This was weird. I just updated my software, through a "setenforce 0" and root shell access since the last update before this left me with a bugged GUI updater, restarted and then logged back in to . . . no users visible in GDM at all. There was nothing but a huge "Other" box staring me in the face. I got the idea to check /var/log/messages and then the GDM greeter logs from there, and here is what I came up with.
/var/log/messages
Quote:
gdm-simple-slave[2259]: WARNING: Unable to close session: no session open#012
[code]...
View 1 Replies
View Related
Nov 16, 2010
I needed to install in g++. So I tried with yum and failed.
Code:
[root@mesozoic ~]# yum install gcc g++ gcc-c++
Loaded plugins: rhnplugin, security
Setting up Install Process
[code]....
I am pretty sure I had the subscriptions. Here is the result of repolist:
Code:
[root@mesozoic ~]# yum repolist
Loaded plugins: rhnplugin, security
repo id repo name
[code]...
View 9 Replies
View Related
Feb 9, 2011
trying to install Veritas Storage Foundation HA on RedHat Enterprise Linux 5.(64 bit)OS was fresh installed (haven't updated anything yet). I tried to start the VSF installer as stated in the documentations. Change directory to cdrom and where the files are located and typed ". ./installer" It is supposed to launch the installer but instead, the terminal window closed itself. I think I'm missing something here. Don't think it's the media problem. Either I run it from window by double-clicking or run from terminal window, it closes and nothing happens.
View 2 Replies
View Related
Mar 8, 2011
Create machine and it tries to boot then all I get is :- ISOLINUX 3.86 2010-04-01 ETC....... Does it even work under Virtual Box? BTW - Its rhel-server-6.0-i386-dvd.iso - Downloaded as eval from Red Hat
View 10 Replies
View Related
Jul 16, 2011
I am looking for TORA software and installation steps to download and install on RHEL 5 64 bit.
Can some one point me to correct URL to download the same and share the steps installation steps.
View 2 Replies
View Related
Dec 16, 2010
i am installing nagios-3.2 in rhel 5 . it show the errors in make all command..
Quote:
[root@ns1 nagios-3.2.3]# make all
cd ./base && make
make[1]: Entering directory `/root/Desktop/nagios-3.2.3/base'
gcc -g -O2 -DHAVE_CONFIG_H -DNSCORE -o nagios nagios.c broker.o nebmods.o checks.o config.o commands.o events.o flapping.o logging.o macros-base.o netutils.o notifications.o sehandlers.o skiplist.o utils.o retention-base.o xretention-base.o comments-base.o xcomments-base.o objects-base.o xobjects-base.o statusdata-base.o xstatusdata-base.o
[Code]...
View 1 Replies
View Related
Feb 18, 2011
Installing VNC in Cent OS 5 / RHEL 5? Check the below link... [URL]
View 1 Replies
View Related
