Is there a tool for Ubuntu that will detect whether I have a SATA or a PATA hard drive interface, even if there's no hard drive inserted?
View 3 RepliesI recognize the obvious need to back up the contents and follow a certain duty of care before attempting to clone my failing pata 250g HD to a 1 tera byte sata. What problems if any could come up when cloning from a failing pata to a sata HD? I'd like to make the switch to sata for many reasons if possible. It is indicated that the HP d530 sff here supports both types.
View 2 Replies View Relatedubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies View RelatedAnyone know if there is a way of detecting if a hard drive is 3.5/2.5 and ide/sata/pata from within a script?
View 3 Replies View RelatedMy collection contains some MP3s which have some glitches like
displaying the wrong duration on loading
minor jumps
suddenly ending despite the duration claims another minute remaining
noise
I'm looking for a tool that can detect as many of these glitches as possible and fix those that can be fixed (obviously e.g. noise can not simply be eliminated in most cases).
Recently i upgraded my dvd writer from pata to sata, now i install LG sata dvd writer into my system, now my problem is that its unable to detect in my fedora 8 box , but i can successfully boot fedora 8 from this dvd writer.i have a kernel version 2.6.23. solution for this.
View 8 Replies View RelatedI tried to load Red Hat Linux 4 on my PC, which has 945 MB, Core 2 Duo Processor, 2GB RAM, 250GB SATA HDD. But i couldnt do so as it did not detect the hard drive and was asking for drivers. I changed the SATA settings to Legacy but still it didnt recognise the HDD...I have Windows XP SP3 also installed on it.
View 2 Replies View RelatedTrying to install SUSE on a perfectly working PC that was running Windows. Blew away all the partitions and formated the drives.When trying to install SUSE, Installer will not detect my two hard disks. Tried with version 10.x, 11.1 and 11.2, without success.My Mobo is a XFX GeForce 8209, and my SATA drives are both Seagates (1x120GB, 1x320GB). I've tried different SATA mode selection (i.e. SATA, AHCI, and RAID) without any success either.I've tried to look for SATA controller drivers for my Mobo, to try to load on Installer startup, but failed there too.
View 1 Replies View RelatedI have a Toshiba Dynabook 2010 laptop and I want to install DSL linux on it.The problem is when I boot with DSL Linux there is no hard drive named /dev/hda1 and fdisk -l command does not return.How can I overcome this problem?And I could only boot into DSL if I use the nofstab as a kernel parameter.when I boot with fstab then kernel panic will occur.
I again checked, now there is a /dev/hda but my hda should contain two ext3 partitions.But the problem is the kernel doesn't recognize them.I got debian in my Had disk too.The problem is debian can recognize these two partitions.
I added new hard drive on a machine running linux redhat linux 5 and I need to define and format this drive to be usable.
View 5 Replies View RelatedI am looking for an application I used in 2001.It was a curses application that displayed devices or files in hexadecimal format, and allowed searching through them and other functionality.
View 2 Replies View RelatedIn Ubuntu 10.04 all I had to do was turn on my external hard drive and it would automatically be detected and mounted. I just switched over to Ultimate Edition, which I think is Ubuntu 10.04 with a lot of stuff added on to it. The funny thing is when I turn on the external hard drive it doesn't get mounted, and I don't think it's even being detected. I looked in gparted and it doesn't show up there. If I boot into Ubuntu 10.04 and turn on the hard drive it still gets detected and mounted, so there's nothing wrong with it. Ultimate Edition can detect other things connected to USB, like my iPod, so I'm wondering why it can't detect my hard drive.
Edit: When I do tail -f /var/log/messages and if the drive gets detected, this is what it says:
[ 230.520892] usb 1-2.4: new high speed USB device using ehci_hcd and address 6
[ 230.639400] usb 1-2.4: configuration #1 chosen from 1 choice
[ 230.639717] scsi9 : SCSI emulation for USB Mass Storage devices
[ 235.631550] scsi 9:0:0:0: Direct-Access Maxtor OneTouch 0122 PQ: 0 ANSI: 4
[Code]....
I recently got the Ubuntu 9.10 cd desktop-i386 (i ordered it from canonical) and i tried to install it , but when i came to step 4 (to partition the HDD) it doesn't recognize my hard drive (3 partitions : 15 gb ext4, 37gb ntfs , 25 gb ntfs).I run Windos XP on 37 gb partition withot problems. I reserved that ext4 for karmic. Also i booted up the live cd to try smth in the terminal...i tried with sudo apt-get -y remove dmraid but still doesn't work.Also when i looked into Places menu the HDD partitions were not there.Also i don't know why but if i dont select ACPI=OFF, ofter booting up desktop freezes after 10 sec...when i select ACPI=OFF it runs great. And when i select ACPI=OFF and NOLAPIC from the F6 boot menu , ubuntu detects my hard drive in places menu and installation menu,but after 15-20 sec the screen freezes and i must restart .I dont think it's the cd because when i tested the live cd at my friends computer it detects their HDD, even without NOLAPIC ! I don't know what to do and i really need Ubunt. Do i need to upgrade my BIOS or what ?
View 4 Replies View RelatedI am out of SATA headers on my motherboard. The only way I can free one up is by switching my SATA DVD ROM to a PATA. How much trouble with this create with software that is linked to the DVD ROM? Will openSUSE 11.3 handle this gracefully or will I just be creating problems?
View 2 Replies View RelatedA friend wants to dump his Windows XP system so that I can install Ubuntu 10.04. His PC has a PATA CD R/W drive and a PATA DVD R/W drive on the only single channel. It has a SATA HDD. The PC BIOS will not allow me to change the order of drives to boot from, only shows the CD R/W drive first then the SATA HDD and will only boot from the HDD. I tried getting the PC to boot from the CD or DVD drive so that I could install Ubuntu from a live Ubuntu CD by disconnecting the power to the HDD, This did not work.
With a live Ubuntu flash drive connected the BIOS does not allow me to change the boot order to boot from the flash drive. I was able to boot from a live Ubuntu flash drive by disconnecting the HDD power. I then quickly hot plugged the power to the HDD so that the Ubuntu installation process could use it. But the installation of Ubuntu did not proceed, probably because it was too late to have the HDD recognised. I suspect that the jumper settings on the CD and DVD drive are such that they are unbootable.
I just purchased a Western Digital My Book World Edition External hard drive and need to mount and format. My router sees the connection but I am now unsure how to proceed. Will linux detect the new device through my wireless connection? I know very little about Unix based or Linux commands.
View 10 Replies View RelatedI have tried many distros and get the same message faulty hard drive SATA the computer was running Windows Vista just fine. I changed the Bios for SATA to be ATA instead of ACHI..
View 1 Replies View RelatedI'm currently running Karmic on a old Dell Pentium 4, and I am having trouble copying files to this box from my laptop which is running Linux Mint Helena. I am able to see and connect to the shared directory on the Dell, copy and execute files from there, but cannot write to it. The permissions have been set to 777 on the shared directory and sub directories within that. The older Dell has a PATA hard disk, 300gb, while my newer laptop has a SATA hard disk. I've read that this can be a problem, and permissions may not be recognized? I'm not able to connect to the laptop from the Dell, neither of the administrator logins work, though I maybe need to do this as root?
Here is the smb.conf file I am running on both machines:
I want to be able to write to my server, not just read and execute. I am also not able to write to the server when logged on to a windows machine on the same network.
My IBM IntelliStation M Pro desktop tower has IDE hardware: CD burner and CD player. My computer (which is ~ 6 years old I think) has an unused SATA power plug end and an unused SATA data transfer port so I thought I'd buy a SATA DVD burner/CD burner combo to replace the PATA CD burner. But I read the following line at Wikipedia and wonder exactly what it means:
en.wikipedia.org/wiki/Serial_ATA "Backward and forward compatibility- SATA and PATA At the device level, SATA and PATA (Parallel AT Attachment) devices remain completely incompatible�they cannot be interconnected......" What does that 'interconnected' really mean? Can I have my 2 IDE hard drives and my IDE CD player play nicely with a SATA DVD burner/CD combo burner? [My OS is MEPIS 8.5]
On an Asus P5Q motherboard, CentOS 5.3 x64. (Separate thread as the other one has turned into just a discussion on my lm_sensors issue). The motherboard's primary SATA controller is the Intel P45 chipset. 6 ports, set to AHCI in BIOS, and all works a charm. Attached are 6 x SATA drives (2 x OS, 3 x data RAID5, 1 x backup). There is also a Marvell chip that provides PATA and also an underlying SATA chip (2 ports) that can do what Asus call Drive Xpert (stripe or mirror RAID) or be set to just standard SATA ports.
It's a SIL5723 behind what CentOS sees as "03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)". Physically the Marvell has only a single optical drive attached to its PATA interface. CentOS has loaded marvell_pata (I assume for the PATA side of it) but I have no /dev/cdrom or /dev/dvd so no optical drive CentOS is trying to use 'ahci' for the Marvell's SATA ports. Dmesg tells me that when it 'sees' them as it boots:
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
ata7: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd00 irq 16
ata8: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd80 irq 16
ata9: DUMMY
It attempts to read SATA drives attached to it, but it just errors trying to access them on boot (e.g. "ata7: failed to recover some devices, retrying in 5 secs" etc). I need the extra SATA ports, and I could really do with having a usable CDROM drive. I found a driver for the Marvell 88SE6121 from Asus. But the latest driver in that is for what it calls "RHEL 50.2" and the script fails with a "Generic Protection Error". That driver looks for kernel "2.6.18-92.el5" in its base_ver variable in the script. Changing the base ver to -128 doesn't help. I have uploaded the driver for if [URL]. Is that modifiable to work on 5.3 / soon to be 5.4?
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies View RelatedopenSUSE 11.3, 2.6.34.7-0.7-desktop, KDE 4.4.x, 3.0-P4, 2.5g mem. I replaced PATA-OEM optical drive with SATA-OEM works fine with all apps outside of and except with this widget. No problems until the swap. I have performed some updates and I have not put the PATA drive back in to see if the behavior changed because it was failing. It could be an update but the optical drive swap is my first suspect. This now. If I hover cursor over notifier widget icon "last plugged in device" will pop up with accurate last device until a click on the widget icon and selection of action for the recently plugged in device. Selected actions work fine ... once.
Then it no longer updates the new or retains the previous DVD/CD (or any USB external drive when connected) entry. Closing after viewing but with out selecting an action results in an empty list also. The menu remains empty there after and only removal of the widget and reinstall makes the devices appear again ... once. Then the behavior repeats if the widget is removed and reinstalled. I was wondering if this is likely to be a udev/rules.d problem related to the swap of the optical drives? The 70-persistant-cd.rules file shows two cd's after the swap:
[Code]...
If I delete or rename the 70-persistant-cd.rules file in udev/rules.d will it truly be recreated at boot and might it this fix the issue? Should I look elsewhere first at some var logs for errors? Reinstall 11.3 and let auto detect and config sort it out is also and option but I'd rather not, heh.
I've been, for some years, an happy user of Highpoint HPT374 based RAID cards, using RAID 5 with decent performances (constantly around 90 MB/sec in read, and 60 MB/sec in write ). Old Athlon mobo , with 2.6.8 kernel. Now the mobo is dead, so I've got an Asrock A330GC (dual proc with 4giga ram), installed Debian with kernel 2.6.26 and moved the controller and disks , and the performances have dropped to a painful 9 MB/sec in write, measured with dd of a huge file (interrupted with kill -USR1 [pidof dd]).
Read performances are still around 90MB/sec, using hdparm -t , repeated many times , figures are constantly around 90MB/sec. I suspect some libata issue , in old kernel the raid was seen as hdb, now is sdb, some driver(s) of the PATA disks may be responsible. I've used the driver, from Highpoint v2.19 , the latest driver is broken (causes kernel oops during format of raid), I've informed Highpoint.
Here some info :
hdparm -i /dev/sdb :
HDIO_GET_IDENTITY failed: invalid argument .
lspci :
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) .....
Can SATA 3 (SATA III) Hard disk be run on motherboard which only supports SATA II, except sacrificing the speed (throughput)?
View 2 Replies View RelatedI'm trying to move an existing FC10 install (created by someone else) from a 160GB WD1600AAJS SATA disk to a 160GB WD1600AAJB PATA disk (cursed trend of horizontally mounting SATA connectors at the end of the motherboard means the latest rev mobo doesn't fit in our enclosure!). I've used DD to copy the disk image from one to the other, but when attempting to boot, I get the following error:
Code:
Unable to access resume device (UUID=946f216f-0c24-4b02-a996-f42059970de7)
mount: error mounting /dev/root on /sysroot as ext3: no such file or directory
That particular UUID maps to sda2, which is the swap partition. Interestingly, both the SATA and PATA disk come up as /dev/sda on the motherboard. I kind of grok that the UUIDs are substitutes for directly naming the disks, and that they're referred to in fstab, initrd-2.6.27.12-170.2.5.fc10.i686.img, and in /dev/disk/by-* I'm guessing the problem is that the GUIDs (at least the one for swap) are no longer the same. How are they assigned to the partitions during boot?
I tried doing
Code:
swapoff -a
mkswap /dev/sda2
swapon -a
and put that new GUID in fstab and into initrd-* (using some steps I found elsewhere on how to gunzip/rezip it).At that point, I get a kernel panic on boot
Code:
Kernel panic - not syncing: CFS: Unable to mount root fs on unknown-block(0,0)
So I'm guessing that the other UUUDs have changed as well and I need to update them. How would I figure out what they are? I suppose I could change the references to /dev/sda*, but I didn't build this original image and I'm thinking whoever did had a good reason to go with UUIDs.
I have a number of drives that I am setting up for friends who wish to switch/alternate from Windoze. So far several completed. One particular drive is being a bit difficult. When checked on my system[10.10] by Sata/USB wire it reads OK and gives the following info. 200GB, 768kb used, file sys Ms-Dos
When installed on the Mobo as main drive and machine booted set to boot from HD it sometimes reports 'No Drive Found' Reset the BIOS to boot from CD and Load Ubuntu from DVD- it goes through load routine then reports 'Error- cannot Mount drive[or words to that effect] Tried installing frm CD/DVD drive to the disk via the SATA/USB wire But that failed also with CD Auto load error So the disk seems to need setting up in some way to suit Linux presumably just like FDisk in Dos/Windoze
Dear OpenSUSE experts: I am a dual boot computer: Win 7 64 bit and OpenSUSE 11.2 64 bit. This computer has 3 hard drives: SSD, 500GB sata II, 1 TB sata 3. SSD contains openSUSE 11.2 500GB sata II contains Win 7.
Win 7 sees the 500GB sata II drive and the 1 TB sata 3 drive. openSUSE sees the SSD drive and the 500GB windows drive. The Motherboard BIOS sees all 3 hard drives. Is it openSUSE not support sata 3 drive? Or do I have to install special driver for it to see it in OpenSUSE?
I have 4 hard drives in my computer. 1 for may root and home partitions. 2 extras for storage and 1 for Windows. I have the hard drive with my root and home partitions set as the first hard drive in the bios. However, in the Ubuntu setup it isn't the first one in the list. I would have thought that the first drive would be get set to sda. That is not the case.
View 1 Replies View RelatedI have REHL 6 Desktop. I have a macbook pro 7,1 with nvidia graphics and (I believe)a nvidia sata controller. I have fedora currently installed with no problems during or after installation ( with a few drivers of of course).
When I boot with the disk i burned ( works on other computers) it comes up of a list of devices to select and when i select local CDROM or DVD it goes to select drivers. So, then I tried "burning" the installation files to an external hard drive then I used the DVD to boot and selected Hard Disk then selected SDB1 (path of external HD). With this method I get to the Graphic installation screen and can go to the part were it says custom partitioning. I select ok then it say the only disk that is available is SDB1 (EXTERNAL).
My friend bought an old hard drive. He noticed something with the hard drive that it was just replaced with a SATA socket. So meaning, the SATA socket was soldered to the PATA hard disk to replace the PATA socket to SATA socket to make it a SATA.
Now the question is:
1. Does the Transfer Rate of the harddisk (that has been replaced from PATA socket to SATA socket) would be SATA transfer rate? OR would still be PATA transfer rate?