Fedora Networking :: Thomson Speedtouch 330 Usb Modem ?
Jan 13, 2011
My girlfriend's xp machine has decided to refuse to boot and as a consequence have told her I can install fedora for all her computing needs (facebook and errrrrrrm facebook)
Problem, she's got this strange usb modem, a thomson speedtouch 330 which when plugged into my laptop is listed in lsusb and lsmod which suggest to me the module/driver is built into the kernel, but does not at present work, I'd hate to admit defeat and reinstall xp.
View 10 Replies
ADVERTISEMENT
Apr 28, 2009
I'm trying to use Speedtouch USB modem.
According to [url].
After a bit of fighting interface works I can ping any domain name or ip address. I can even connect to web server via telnet, for example telnet www.org 80. I can see the response from Web server, but Mozilla says that it is offline, System Update says that no connection.
What can be the problem if manually I can connect but any Gnome GUI program says you are offline?
View 1 Replies
View Related
May 25, 2010
I installed Ubuntu 10.04 this morning and everything is working fine apart from one thing. I am unable to install my Speedtouch 330 modem on it and connect to the internet, I looked on the help pages and found this:
"Visit Ubuntu Packages Search and search for each of the following packages. Download them to a folder that is also visible from Ubuntu (or to a USB stick).
As I cannot access the internet I had to go back to windows, download them onto a memory stick, go back on to Ubuntu and install them. The first 12 worked fine and are now installed but number 13 and 14 wont allow me to update because "the dependency is un-satisfiable" does anyone know what this means and how I can fix it? I was also unable to get the USB ADSL Modem Manager too install either because of another error.
View 5 Replies
View Related
Jan 23, 2010
I'm trying to install my first linux system. I would like to use it as a server on an old 386 PC.For the internet connexion (ADSL) i use a Speedtouch USB modem.When i list the peripheral installed on the system, i see the modem with apparently a driver, but the device is listed as non classified. For me it should be directed to DSL0 but..According to some tuto i declared a DSL connection, ppp with ATM (VPI8 and VCI35).I launch the connection with pinternet but the connection failed.
View 4 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
Apr 30, 2011
I have just upgrade to natty from maverick and my usb wifi dongle doesn't want to work. The usb wifi adapter i use is a Thonsom Speedtouch 121g. When using ubuntu 10.10 it work's fine after installing the package linux-firmware-nonfree, but after upgrading to natty it has stop working (the linux-firmware-nonfree package is installed [don't know if is the same version or an upgraded one]).
The network manager doesn't display available wifi nets. The output for lsusb is:
Bus 001 Device 004: ID 06b9:0121 Alcatel Telecom SpeedTouch 121g Wireless Dongle
View 9 Replies
View Related
Jun 29, 2010
I recently began using fedora (13) on my acer laptop, and at first the WiFi was fine. However, after a day, it wouldn't connect to my SpeedTouch router through WiFi (though it works fine with a cable), however, it works fine with my Philips Router WiFi.
View 1 Replies
View Related
Mar 14, 2010
did someone know where I can download the driver of the thomson TG123g? I have opensuse 11.2
View 2 Replies
View Related
Mar 23, 2011
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
View 1 Replies
View Related
Feb 8, 2010
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
View 4 Replies
View Related
Nov 20, 2009
I have installed the KDE spin and am liking it so far. Except for the fact that I cannot get onto the internet. I rely on this ZTE USB wireless modem for internet and that just would not get recognized in Fedora. Plus, my Windows installation is down and I would love to keep it that way if at all possible.
I have followed a few instructions on this particular problem. I have modified the menu.lst file to account for the usbmodserial and product. The usb_modeswitch program has also been installed and the usb_modeswitch.conf file has been edited with the values I got from the 'lsusb' command's output.
But the curious thing is that when I actually execute the usb_modeswitch command, I get a message saying that there are no drivers for the ZTE device. Which means that I cannot go onto the wvdialconf part of it at all. Basically at this point I dont have a modem, according to Fedora. But it does get recognized as a ZTE device. That tells me that there is something right about what I have done so far and may only need to do a few tweaks here and there.
PS - I am based out of India and this is a Tata Indicom Photon (NOT Photon Plus) connection for which I have a USB device which acts as a modem.
View 1 Replies
View Related
Oct 3, 2010
i have modem HSPDA ( prolink PHS 100) but i don't know how to use in linux. I already to set password,user name and etc. in wvdial. but it still can't to connect to internet.
View 2 Replies
View Related
Nov 13, 2010
When I use Ubuntu, my DSL modem correctly gets the hostname I call my computer "mertensia", but I'm having issues with Fedora. Yet, when I look at the name assigned by the modem (using URL... in a web browser),I need the PC Name to be mertensia, because otherwise it will complicate how I ssh immensely.
View 4 Replies
View Related
Feb 3, 2010
Steps for using scan Modem to Identfy dial up modem?
View 1 Replies
View Related
Feb 23, 2009
My brother installed Fedora 8 on my 2004 Dell Inspiron 1000 laptop with a 56k MDC modem. I cannot figure out how to get the dial modem to work! Modem Device?, Baud Rate?, Flow Control?, Modem Volume?
View 1 Replies
View Related
May 27, 2009
For F10 patched. I'm in Honduras. The local cell / Internet provider that covers Guatamala, Honduras, El Salvador, uses an HSDPA modem marked "GBC" and is also known as the "China Bird". It's a black usb stick that looks identical to the option unit, but its definitely not an option modem.
lsusb lists it as 1c9e:1001 with no text after it. It automounts as a disk drive with typical Windows software on it. Nothing ever shows up in /dev/ttyUSB*, as I believe the disk mount causes it to not try mounting it as a modem. Dismounting it also does no good.
View 4 Replies
View Related
Aug 6, 2009
I have a creative modem blaster V.92 which I know works because I have used it on windows and ubuntu how ever I am having some problems with F11 it sounds like its dialing okay and the box pops up that says please wait when I try to connect via the network manager thing but thats all it does the box never goes away and I've looked at the modem lights thing I added to my panel and it says its not sending or receiving anything and firefox doesnt work so I am not sure what I am doing wrong here.
I got an error with the default settings so I switched the device to ttys0 and set the baudrate according to what wvdialconf said was okay which also wont connect for some reason it hangs too.. I am confused here. Has anyone successfully set up a dial up connection in fedora 11
View 14 Replies
View Related
Sep 7, 2009
I recently upgraded to Fedora 11, and am having an issue with the USB modem (Novatel USB720) disconnecting almost immediately after it is connected. Sometimes it disconnects 30 seconds after it is connected, sometimes 2-3 minutes. And other times it stays connected for hours without a problem. I know the card is good as it works using Verizon Connection Manager software under Windows and never had this problem.
And, I am able to get to the Internet while it is connected, so it is passing traffic OK. I'm using the NetworkManager to connect the "Auto Mobile Broadband" connection. I've seen other posts on this very same issue, and I verified that pppd is called using the "lcp-echo-failure 0" and "lcp-echo-interval 0" options. But it seems that when it does disconnect, in /var/log/messages it says "LCP terminated by peer".
Below is an example of /var/log/messages where we can connect, then it immediately disconnects.
Sep 7 09:55:08 c3po NetworkManager: <info> Activation (ttyUSB0) starting connection 'Auto Mobile Broadband (CDMA) connection'
Sep 7 09:55:08 c3po NetworkManager: <info> (ttyUSB0): device state change: 3 -> 4 (reason 0)
Sep 7 09:55:08 c3po NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled...
Sep 7 09:55:08 c3po NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started...
Sep 7 09:55:08 c3po NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete.
Sep 7 09:55:09 c3po NetworkManager: <info> (ttyUSB0): powering up.....
View 5 Replies
View Related
Nov 26, 2009
I have F9, F10, F11 and F12 installed along with WinXP on my desktop PC. I connect to the internet thru 56K dialup modem (USR-5610B). The earlier versions of Fedora, F9, F10 and F11, all can connect via dialup modem.
My F12 installation is augmented with the following rpms - kudzu-1.2.86.2.i686, libwvstreams-4.6-5.fc12.i686 and wvdial-1.60.10.fc12.i686 (and the rpm for USR-5610B modem)
Network Configuration GUI shows ppp0 (Modem) in the Common Active Profile
However, ppp0 does NOT show up in the Network Device Control GUI, AND ACTIVATE and DEACTIVATE buttons are GREYED-OUT.
View 2 Replies
View Related
Jan 23, 2010
The problem is that when I connect my phone to my machine FC11 x64 via USB and use the phone as a modem NetworkManager does not recognise the phone as a modem. The phone works well on my laptop which is FC11 32bit system, NetworkManager detects it and sets it up as eth2 and away I go, no problems at all. I would like to ask the community how can I go fault finding to find out why it does not work. #lsusb shows that the modem is being detected by the system but beyond this I don't know where to look and get things going.
View 1 Replies
View Related
Jun 8, 2010
if i have Fedora 13 installed on a desktop and on a laptop, can i organize so that both machines use the same dsl connection? I have an external DSL modem that is currently connected to my PC via an ethernet cable. When I want to use my my laptop I usually unplug the dsl connection from my computer and plug it into my lap top. is there some way i can have it connected to both?
View 9 Replies
View Related
Nov 8, 2010
I have a modem PROLINK PHS 100. sometimes when I plug in the modem, can be used. sometimes there is no reaction at all. What should I do.
View 2 Replies
View Related
Dec 30, 2010
Ive got two connections, one is the eth0, that is the LAN connection to the DSL modem (192.168.1.1) and the other is the DSL connection that I connect to use the internet. Now I can only connect to one of the two at a time, so when I'm connected to the internet, I am not able to access 192.168.1.1. How do I use the two simultaneously?
View 8 Replies
View Related
Jan 28, 2011
My EVDO (Mass storage cum Modem device) like USB Modems not working on Linux-2.6.10 kernel.I used usb_modeswitch-1.0.5.tar.bz2 package on Linux to flip from mass storage device to modem
View 3 Replies
View Related
Jun 15, 2009
Fresh install of FC11. Had to install libwvstreams-4.5.1-5.fc11.i586.rpm and wvdial-1.60-8.fc11.i586.rpm
Now get following error -
View 6 Replies
View Related
Jul 13, 2009
how can i connect to the internet using modem card?
Intel d915,3GHz pinless,Lucent Modem
View 6 Replies
View Related
Sep 19, 2009
My USB-modem and my freerunner phone is no longer recognized by fedora. Last time this happened I just reinstalld Fedora because I had no id�a what caused the problem. But now I recognized that virtualbox was the last package I installed before the problem occured.
I tried to uninstall virutalbox but the problem remained. Is there a way to reset all the network settings without reinstalling fedora?
View 3 Replies
View Related
Oct 9, 2009
I am using samsung mobile (sgh-b220) in order to connect to the internet. I can easily connect on windows system , using PC studio software. I tried KPPP, wvidial none solved the problem. (It successfully dials the number. Put pppd connection will be terminated)
Some how I managed to scan modem communication taking place on the windows system, and tried exact commands on linux system still I am not able connect.
I have attached log files from windows machine. wvidial.conf, wvidial out put file along with this post.
View 3 Replies
View Related
Nov 26, 2009
I am trying to get a Vodafone USB modem to work - Huawei K3765 (which is a rebranded E169). It's supposed to be recognized by the kernel and just added through Network Manager, but - no luck. I also installed vodafone-mobile connect from here: [URL] (as well as the other packages). What happens when I start it - it doesn't see the modem. It's seen as a CD drive, and clicking "eject", "unmount" or "remove safely" on it doesn't help - it disappears, then several seconds later appears as a CD drive again.
View 14 Replies
View Related
Dec 8, 2009
I'm running F12 on a Toshiba Satellite laptop. I don't have any problems connecting to eth0 or wlan0 when I'm at work or when connecting to a variety of cable modems, but for some reason I can't connect to AT&T/Bellsouth's dsl modem at my house (can't connect directly, much less through my DI-524 D-Link wifi).Does anyone have any idea why? I've been through every setting I can think of and I've stayed on the phone with techsupport for AT&T and physically watched as they've pinged and reset my modem, so signal into the house/modem is good....and I can hit the modem's IP and go through all of the configuration settings and everything from Bellsouth says that I'm connected and online, but when I attempt to go to another website like google or yahoo or fedora.com, I get a message telling me "Server at ******** not found."After spending 2.5 hours on the phone last night with tech support, I came into the office tonight and hooked right up to TruVista's (cable) network.
View 5 Replies
View Related
