Fedora Networking :: SpeedTouch Modem In 10 - System Update Says That No Connection
Apr 28, 2009
I'm trying to use Speedtouch USB modem.
According to [url].
After a bit of fighting interface works I can ping any domain name or ip address. I can even connect to web server via telnet, for example telnet www.org 80. I can see the response from Web server, but Mozilla says that it is offline, System Update says that no connection.
What can be the problem if manually I can connect but any Gnome GUI program says you are offline?
View 1 Replies
ADVERTISEMENT
Jan 13, 2011
My girlfriend's xp machine has decided to refuse to boot and as a consequence have told her I can install fedora for all her computing needs (facebook and errrrrrrm facebook)
Problem, she's got this strange usb modem, a thomson speedtouch 330 which when plugged into my laptop is listed in lsusb and lsmod which suggest to me the module/driver is built into the kernel, but does not at present work, I'd hate to admit defeat and reinstall xp.
View 10 Replies
View Related
May 25, 2010
I installed Ubuntu 10.04 this morning and everything is working fine apart from one thing. I am unable to install my Speedtouch 330 modem on it and connect to the internet, I looked on the help pages and found this:
"Visit Ubuntu Packages Search and search for each of the following packages. Download them to a folder that is also visible from Ubuntu (or to a USB stick).
As I cannot access the internet I had to go back to windows, download them onto a memory stick, go back on to Ubuntu and install them. The first 12 worked fine and are now installed but number 13 and 14 wont allow me to update because "the dependency is un-satisfiable" does anyone know what this means and how I can fix it? I was also unable to get the USB ADSL Modem Manager too install either because of another error.
View 5 Replies
View Related
Dec 8, 2009
I'm running F12 on a Toshiba Satellite laptop. I don't have any problems connecting to eth0 or wlan0 when I'm at work or when connecting to a variety of cable modems, but for some reason I can't connect to AT&T/Bellsouth's dsl modem at my house (can't connect directly, much less through my DI-524 D-Link wifi).Does anyone have any idea why? I've been through every setting I can think of and I've stayed on the phone with techsupport for AT&T and physically watched as they've pinged and reset my modem, so signal into the house/modem is good....and I can hit the modem's IP and go through all of the configuration settings and everything from Bellsouth says that I'm connected and online, but when I attempt to go to another website like google or yahoo or fedora.com, I get a message telling me "Server at ******** not found."After spending 2.5 hours on the phone last night with tech support, I came into the office tonight and hooked right up to TruVista's (cable) network.
View 5 Replies
View Related
Jul 3, 2011
newly installed fedora 15 is not able to connect to internet i have broadband connection with wireless modem my laptop is connecting to wireless modem network. but i am not able to configure pppoe connection on it PS: i am able to connect to internet when using wired connection from modem
View 2 Replies
View Related
Jul 4, 2010
I have been successfully using my speedtouch usb 330 for years.
Now suddenly something weird occurs.I manage to stay connected a few minutes, afterwards the line drops down and I can't reconnect.
I switched the connection script to "verbose mode" and what I get is:
It seems that I can't get an answer from the provider, but if I reboot it connects at first attempts, but the connection falls down again after a few minutes.
I have dual boot. No similar problems is affecting the connection under Windows, so some hardware fault is ruled out as a possibility.
View 5 Replies
View Related
Feb 18, 2011
I recently installed linux Fedora 14.... how do i have internet connection via my mobile modem...? i conect via usb
View 2 Replies
View Related
Apr 30, 2010
I have a huawei e230 modem that used to work pretty good until this week. It has always been much slower on linux than windows but I am not complaining because windows keep disconnecting ever hour or so, while linux can stay connected over night without problem. The modem is still recognized but when I try to connect it suddenly disappears.
View 1 Replies
View Related
Jan 23, 2010
I'm trying to install my first linux system. I would like to use it as a server on an old 386 PC.For the internet connexion (ADSL) i use a Speedtouch USB modem.When i list the peripheral installed on the system, i see the modem with apparently a driver, but the device is listed as non classified. For me it should be directed to DSL0 but..According to some tuto i declared a DSL connection, ppp with ATM (VPI8 and VCI35).I launch the connection with pinternet but the connection failed.
View 4 Replies
View Related
Mar 12, 2009
I've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do
Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?
View 10 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
Mar 21, 2010
Generally I don't like just asking stuff but just can't crack this one. I got a debian machine. My internet connection is on a 3g usb modem. It connects perfectly. Then I downloaded DHCP 3 and then configured it so I got 172.16.0.0 network address with gateway on 172.16.0.1 (set by DHCP) 172.16.0.1 is also the eth0 address and is assigned as fixed by DHCP. With the modem not connected the other PC connects no prob, gets the default gateway and get assigned an ip by DHCP and there is a proper connection with APACHE serving pages. So it is all grand. Where my prob comes in is that I am not able to get traffic from the modem through to the other PC, and at times the modem would not be used as default connection with eth0 up. Restarting the modem fix this but then also drop the assigned gateway address.They are connected directly via crossover cable. The modem is setup as ppp0 according to ifconfig and then ethernet as eth0 and I tried some masquerading allowing all traffic through but does not seem to do the trick.
View 1 Replies
View Related
May 2, 2010
Connection is possible only after few reboot. Preferences I tried all.
View 9 Replies
View Related
Jan 9, 2011
I have a usb modem which I plug into my ubuntu 10.10 system for a dial-up service. The modem is recognised by wvdial and dials properly, but the connection is not established.I get "Unable to run /usr/sbin/pppd" (although pppd is certainly in /usr/sbin), followed by "Check permissions of specify a 'PPPD Path' option in wvdial.conf", and finally "Connected, but carrier lost", then it gives up.
View 5 Replies
View Related
Aug 6, 2011
I have a MTS MBlaze USB dongle, with which I can connect to the internet. The question is, how do I set up a ssh connection accessible over the internet so that any one can connect to my PC through that (using valid username/password provided by me of course) ? If not possible, what do I need to make this possible ?
View 3 Replies
View Related
May 25, 2011
I'm using Fedora 15 with KDE, and in the NetworkManager settings I can't set my Ethernet connection to be a System Connection. The box is greyed out. I assume only root can enable this option, but GUI apps typically ask for an administrator password. I did add my user to the "Administrator" group when I installed and I can use sudo and all that.
View 2 Replies
View Related
Apr 28, 2009
I've tried to use the GUI tool for update system in Fedora 10. It listed all of the available updates successfully, but it have not any response when i click the 'Update System' button~
View 2 Replies
View Related
Jan 28, 2010
Earlier today I decided I wanted to switch back over to ubuntu, my internet was working fine, but as soon as i reformatted to Linux my modem stopped showing any lights under ADSL - TX and RX. and I can't connect to my wireless connection anymore. What should I doooooooo
View 1 Replies
View Related
Apr 22, 2010
I`m trying to establish pppoe connection from Linux clinet to Win server.
I get in ppp.log message:
As I see in this log server gets IP address to client but after connection terminates.
View 4 Replies
View Related
Apr 30, 2011
I have just upgrade to natty from maverick and my usb wifi dongle doesn't want to work. The usb wifi adapter i use is a Thonsom Speedtouch 121g. When using ubuntu 10.10 it work's fine after installing the package linux-firmware-nonfree, but after upgrading to natty it has stop working (the linux-firmware-nonfree package is installed [don't know if is the same version or an upgraded one]).
The network manager doesn't display available wifi nets. The output for lsusb is:
Bus 001 Device 004: ID 06b9:0121 Alcatel Telecom SpeedTouch 121g Wireless Dongle
View 9 Replies
View Related
Sep 30, 2010
I'm running Lucid xubuntu. i have a netgear WG111v3 usb wireless card. The router and the modem recognize each other,. but the connection drops constantly.Other times it takes many tries to connect. There are 3 windows and one Xbox users in my house, all on the same router. When I spoke with 2 different people at Radio Shack, I was told that the software on the router is Windows based, so the Windows modems get top priority over Linux, hence the dropped signals. I was advised I could do One of three things:
1. Buy another router, one that specifically recognizes every operating system. That way, we all get equal bandwith.
2. Buy an antennae that boosts the signal.
3. Buy a booster for the signal that one cable end plugs into the router,then the device into a power outlet; the other in any power outlet, and then hardwire that to my ethernet card in my computer, so the signal stays constant. This is the output from the terminal:
[Code]....
Based on this information, what would be my best option. I can't run line all the way across the house to my computer; that would take 50-75 feet after winding it's way through the house. I don't use the ethernet card although it's still in the machine. Could it interfere with the signal?
View 1 Replies
View Related
Dec 12, 2010
Running 2.6.29-gentoo-r1 on a Sun Ultrasparc 10 with a Sun Happy Meal on eth0 connected directly to my cable modem. Intermittently, with a frequency between a few hours and a few days, I lose internet connectivity. Running ifconfig eth0 indicates all is well and I have a valid IP address but I cannot even ping the cable modem's management address; pings to 127.0.0.1 and eth0's IP address do get a reply but no other address I've tried does. I can 'fix' the problem by issuing
Code:
If I check the CM logs, it appears that it has rebooted itself prior to the loss of connectivity. The strange thing is that the incoming traffic doesn't seem to be affected by this, my PSAD log is full of incoming scans even during the periods when I can't connect to the net. I suspect this is an ISP problem (they own the CM);
View 2 Replies
View Related
Jan 24, 2011
Running Gentoo with kernel 2.6.29 on a Sparc Ultra 10. I'm having problems with my cable modem connection failing, so I've added a static route that enables me to log into the modem's diagnostics page at 192.168.100.1 when the connection drops; my /etc/conf.d/net looks like this (with the comment lines removed).
Code:
dns_domain_lo="MYNETWORK"
config_eth1=("192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255")
config_eth0=("dhcp")
routes_eth0=(
"192.168.100.1/32 via 0.0.0.0"
) dhcpcd_eth0="-N"
This works but after a period of several hours to several days, this static route disappears from the routing table.
View 1 Replies
View Related
Jan 4, 2010
I've been trying to get a USB modem stick to work with Karmic.The modem is the ZTE MF626 HSDPA on a Telstra Next G plan.I've followed all the guides and links on the forums:Have deactivated the CD autorun on the USB stick in XP lsusb is showing "Bus 002 Device 003:ID 19d2:0031 ONDA Communication S.p.A." demsg is showing "usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1"This seems stable as well, ie checking periodically it doesn't seem to be disconnecting By the way,the blue light indicating network communication/modem active lights up after the device has been plugged in for a second or so.
When I go through Network Connections and add a new mobile broadband connection, there is nothing listed in the "Create a connection for this mobile broadband device" drop-down on the first configuration screen - all the guides I've read say that it should be listed here, but none say any debug steps if it doesn't.Some other guides for older versions of Ubuntu and earlier versions of the modem reference a "/usr/share/hal/fdi/information/20thirdparty/20-zte-mf626.fdi"file which I don't have.
View 4 Replies
View Related
Jun 29, 2010
I recently began using fedora (13) on my acer laptop, and at first the WiFi was fine. However, after a day, it wouldn't connect to my SpeedTouch router through WiFi (though it works fine with a cable), however, it works fine with my Philips Router WiFi.
View 1 Replies
View Related
Feb 17, 2011
sometimes our ADSL connection gives up and we are left without internet connection for days until the problem gets fixed. I mean by this problem along the phone line. It affects all machines that connect to the internet through a Netgear WIFI Modem Router. I recently tried an alternative when this happens is to use a USB Huawei Mobile Broadband UMTS connection which works when you insert it in 1 laptop. Is there a way i could get the Netgear WIFI modem router to connect on that usb stick or PC that is online on that usb stick and give access to other machines that will want to connect to the web ?
View 4 Replies
View Related
Apr 4, 2009
I use FC9. Yesterday after system update I turned of the computer, but today when it booted the wireless didn't work, ndiswrapper device wlan0:1 does not seem to be present, delaying initialization.I have removed and again installed the wireless driver and looks like it is ok,
[root@localhost utils]# ./ndiswrapper -r bcmwl6
[root@localhost utils]# ./ndiswrapper -i /fatfs/Archiv/Softwere/Drivers/Dr_software/bcmwl6.inf
installing bcmwl6 ...
[root@localhost utils]#
after ndiwwrapper -m
it gives warning( or error )[root@localhost utils]# ./ndiswrapper -m
module configuration already contains alias directive
[Code]....
View 3 Replies
View Related
Dec 8, 2010
I want to buy a gprs modem which supports linux, which brand is better?
View 5 Replies
View Related
Oct 17, 2010
i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies
View Related
Jan 28, 2011
Yesterday i have installed F14 and then went to the comand line to update the system via yum update. It was about 860MB of updates in 430 packages. The strange thing is that only one package was a delta rpm and all other were normal rpm. Is Fedora giving up on presto or it needs some special configuration?
View 1 Replies
View Related