My brother installed Fedora 8 on my 2004 Dell Inspiron 1000 laptop with a 56k MDC modem. I cannot figure out how to get the dial modem to work! Modem Device?, Baud Rate?, Flow Control?, Modem Volume?
View 1 RepliesI have a creative modem blaster V.92 which I know works because I have used it on windows and ubuntu how ever I am having some problems with F11 it sounds like its dialing okay and the box pops up that says please wait when I try to connect via the network manager thing but thats all it does the box never goes away and I've looked at the modem lights thing I added to my panel and it says its not sending or receiving anything and firefox doesnt work so I am not sure what I am doing wrong here.
I got an error with the default settings so I switched the device to ttys0 and set the baudrate according to what wvdialconf said was okay which also wont connect for some reason it hangs too.. I am confused here. Has anyone successfully set up a dial up connection in fedora 11
One of my clients brought a laptop to me with a 64 bit processor and wanted to hook up his zoom 3095 usb dial-up (56k) modem to a his laptop using ubuntu 9.10 AMD 64 bit version. We quickly found out that zoom has only made 32 bit drivers for linux. So...I need to find a usb modem that has drivers that will work with a 64 bit version of ubuntu 9.10.
View 1 Replies View RelatedSteps for using scan Modem to Identfy dial up modem?
View 1 Replies View RelatedI'm using an external Huawei CDMA fixed wireless terminal (phone + dial-up modem). It connects to my PC via a USB port. Actually my PC recognizes it (after driver installation) as "TIUMP Serial Port". I guess the driver is a kind of USB adapter for a serial port.
I can't get it to work in ubuntu 9.10. I ran wvdial (after installing dependencies and wvdial package) and it doesn't recognize my device as a modem. Is there any solution to this problem? Without solving it, I won't be able to go online from ubuntu.
I use ubuntu 9.10 and PCI connected Conexant CX11252 Modem. My GNOME PPP doesn't detects my modem. How can I create a connection? Is there any way to detect my modem and connect ? or ubuntu is fit only for broadband? I think most of the activities in ubuntu depends on internet. I can't do any work. I am losing my money in Internet Cafe. Broadband is even not available in my resident area. Therefore. find a solution to connect internet via my dial up modem!
View 9 Replies View RelatedI have been working for the last week trying to connect my serial hardware external modem (courier 56K v.everything) within an Ubuntu 10.4 environment. I live in the boonies where I am presently forced to use dial up, so this has got to work, else I cannot update Ubuntu or download software. After trying various suggestions, which my very limited Linux skills fail me, I opted for the suggestion that I download gnome-ppp, install and then use it. Seeing how I cannot download it through Synaptic Package Manager (which I was advised to but can't as it is my Linux computer that I am trying to connect).
I downloaded the zipped file (gnome-ppp_0.3.23_Oubuntu2.tar.gz ) to a USB stick, copied it to the home directory and then extracted it, wherein a new directory was created with many files in it. From here I have been unable to install it through the command line (not sure how), nor have I been able, as was suggested, to install it via the Synaptic Package Manager (can't get it to see the file, not sure how to). I need explicit (Newbie) instructions on how either to connect the modem without gnome-ppp, or instructions on how to get gnome-ppp installed.
I just can't seem to get this thing going. I've also tried Gnome-ppp. Press detect and it says "no modem installed" I did install it in Windows as well to make sure the darn thing actually works. It did perfectly.
Your US Robotics modem attached at /dev/ttyACM0 >>> The problemt: wvdial for some reason cannot use it
I had to edit the /etc/wvdial.conf file with gksudo gedit /etc/wvdial.conf
john@ubuntu:~$ sudo wvdial
[sudo] password for john:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port
[Code]....
i'm trying to install zoom 3095 usb dial-up modem on my laptop which has ubuntu 9.10 on it but i got an error
Where is the linux source build directory that matches your running kernel?[lib/modules/2.6.31-21-generic/build]
Building modules for kernel 2.6.31-21-generic/build, using source directory lib/modules/2.6.31-21-generic/build. Please wait...
ERROR: Module build failed! Please examine the log file "/tmp/dgcconfig-buildlog.txt" to determine why.
dgcconfig-buildlog.txt said:
(cd /lib/modules/2.6.31-21-generic/build && make "CNXT_KERNELSRC=/lib/modules/2.6.31-21-generic/build" "M=/usr/lib/dgcmodem/modules" "CC=gcc" clean)
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-21-generic'
[Code]....
I tried Gnome-ppp but terminal can not find it! Retired can only afford cheap dialup.
Where can I get a version of ubuntu that has system -> administration-> networking?
After much work finding the bits and bobs to get my PCI controller based modem working in Ubuntu 9.10, I need a better way to start and stop it. Now it dials up when I reboot whether I want to be online or not. I can stop this, but it won't dial up again without a reboot.
I would love a way to push a button to get it to connect and disconnect, and blinking lights (like the green computer screens in WinXP) to tell me when I am communicating. Even better would be a way to set up multiple connections, again like in XP so I could use a variety of numbers and/or user names depending on where I am.
I want to use my nokia 6233 as a dial up modem in fedora 10.
View 1 Replies View RelatedI just installed Lucid Lynx Ubuntu on my computer. I love it, but I do not see how to configure my dial-up modem and connect. I'm hoping it's still possible. Here's my hardware.
333mHz Pentium III
Lucid Lynx 10.04 LTS
US-Robotics 56K Faxmodem External
256mb RAM
ISP OmniLEC
I have the Linux bible however am finding it impossible to get online. I have dial-up (Rosewill USB) I just installed FC12. It cannot find the modem. First, do I need a driver, where do I find it. It is not a winmodem. I am very excited to get away from Microsoft and their monopoly but I just need to get online.
View 2 Replies View RelatedI use an atom based processor of 1.60 ghz on intel d945gclf board. My ram is a zion 1gb @ 533mhz. Hdd is from western digital 80gb @ 7200 rpm. I have a broadband(dsl) connection from bsnl dataone (a state owned telecom service provider). I connect to internet via a huawei wa1003a ethernet/usb/wireless modem which is provided by my service provider. I need a username and a password everytime i connect to internet via dial-up.
I was using windows xp service pack ii. It was nice and easy installing my modem on xp either via usb or ethernet. Both ways it was easy as i have both the drivers with me.Only and main problem was fighting viruses. I tried many free downloadable anti-virus software to protect my maching. Initially they were fine. But after few months they stopped taking regular updates and became non-functional. I also tried symantec corporate v.10. But it has its drawbacks also. It made my machine perform like a snail.I had previously heard about linux based operating systems. But never tried one. As i am an ameteur in using computers windows xp was suiting my needs. Recently i saw an article in the newspaper about ubuntu which is a free open source operating system. And most important to me it is virus free.But here is a problem also. I cannot connect to internet. My ubuntu 9.10 karmic koala is not identifying my modem and a network between my modem and my machine cannot be established. Also i cannot create a dial-up option where i can give username and password.
My USB-modem and my freerunner phone is no longer recognized by fedora. Last time this happened I just reinstalld Fedora because I had no id�a what caused the problem. But now I recognized that virtualbox was the last package I installed before the problem occured.
I tried to uninstall virutalbox but the problem remained. Is there a way to reset all the network settings without reinstalling fedora?
I have a ZTE HSUPA USB Modem Model:MF636 which used to work great and then is not longer detected.
I am using Fedora 12 and was having problems with the modem not been properly detected and filed a bug, which turned not to be a problem of NetworkManager, but an issue with udev.
https://bugzilla.gnome.org/show_bug.cgi?id=603433
I followed instructions to edit /lib/udev/rules.d/61-option-modem-modeswitch.rules and then it worked fine.
Now the modem is again not properly detected. Here is a copy of the results from dmesg code...
I have tried restoring the file that I edited. It was back to the stated previusly reported. I also have tried to run an older kernel. Then I updated to the latest kernel available for Fedora 12. Nothing seems to work.
I have an external usb dial up modem. lsusb shows: Bus 001 Device 002: ID 2001:f10d D-Link Corp. [hex] Accent Communications Modem How do I set this up? It probably needs a driver, how do I check it, or better yet, can I get yast to tell me if it recognizes the modem or needs firmware? I know linux and dial up is like the seventh circle of hell. Just wondering if there was a snowball's chances of getting this working. Sorry if this is the wrong section to ask in. Seemed like as good as any when I checked.
View 9 Replies View RelatedI have a US Robotics serial modem, and I have smpppd enabled in system services, with wvdial and kppp installed. When I try to set the modem up using yast, I keep getting hung up by the different screens. First a screen that asks if I need to dial a number to get out. I have to dial 9, so I have that entered. Then a screen that asks for "country" and "provider."
When I try to enter anything, nothing shows in the boxes, so I go to a screen that asks for the phone number, provider, user name and password. When I enter those, it goes to a screen that wants "Connection Parameters", with default settings and the "buttons" at the bottom of the screen "muted," or flattened out, i.e. unusable. That makes it impossible for me to set the information as saved, so it's back to the beginning and sart over, with the same results over and over. How do I get the modem so it dials out?
I have only a dial-up connection. I've been using the 32-bit version of WVDIAL and its associated programs in Karmic Koala for over a year. I recently finally got around to installing Maverick Meerkat on a different drive. The 64-bit version. I see that I need the 64-bit version of the modem software, and I haven't found it right away. Where can I get it? The programs required under 32-bit Karmic Koala:
libwvstreams4.6-base
libwvstreams4.6-extras
libuniconf4.6
wvdial
All of these had .deb filename extensions. Also, largely because I only have a slow dial-up connection, I don't have any updates for either Karmic Koala or Maverick Meerkat installed. If you happen to know that I absolutely need some particular update(s)
i have usb modem sierra 885 compass but i don't know how to install it, nor to make it work in fedora 7
View 1 Replies View RelatedIt's been a while since I've logged into this forum, but I'm back to using openSUSE, and my experience with this OS has so far been quite pleasant. I have a U.S. Robotics Dial-up modem, model USR5637, that I've used with other linux OS's, such as Ubuntu, Fedora, and Puppy, but I haven't had any luck using this modem with openSUSE. This is a full hardware modem.
Usually, when using this modem on a new Ubuntu system, I got into the terminal, type "lsmod" and then "modprobe cdc_acm" and the modem begins to work. However, in openSUSE this is not the case. I'm using Gnome and KDE, with kppp, and I'm unable to connect to the internet. Is there a way of installing this modem that I am overlooking?
After >15-yrs using MSWindows, I'm getting a new PC with Ubuntu as my OS. This is for typical home use--net access, web browsing+email, office suite apps.
[code]....
I've read and bookmarked various info on configuring modem, including PPP and wvdial info. But one question: Is there a particular version # of Ubuntu best for external dial-up modem use? I have the CD for 9.10 Desktop edition. It seems that different Ubuntu versions include some things, others not. Another Q: Reading this page about wvdial, it refers only to serial modems. Does the info apply to USB modems, like the USRobotics 5637? [URL]
working and installation of External usb modem , dialp , DEll d400 ( in vostro 1510 )
View 8 Replies View RelatedI'm trying to produce a dial-tone from my modem with Mgetty. I found this online: I recently discovered a feature that's part of the command set of some voice modems that enables it to produce tones. The latter is of interest to us since the US dial-tone and others are a combination of two frequencies (440Hz and 350Hz in the US). Below is an ordered list of AT commands that initialize the modem, produce a dialtone for 2.5 seconds and answers the call. To check if the "AT+VTS" command is supported, or to get the parameter value ranges supported by it, use "AT+VTS=?"
[code]...
Are there detailed instructions for Suse 11.2, anywhere, on installing a hardware dial-up modem and configuring it to get an Internet connection?
View 2 Replies View RelatedTrying to set up a modem connection under FC11, using the applet under System/Administration/Network/Add gives the following error:
Code:
Local variables in innermost frame: If the script is faulty, could you guide me through setting it up by hand? I am required to be away from my normal location for a few weeks starting Monday and need to keep in touch.
I'm trying to do something very old, but for me very necessary. I am trying to get dial in acces via a modem that is connected via a usb <-> serial converter. I am running F14. The serial port is OK. I can run minicom and access the modem and even interogate it. What I am unable to do is to get the computer to answer. Much has changed and I have not dealt with upstart and things like that (if indeed that is needed).
I believe I"m OK with 115200 communicating with the modem. I know the device is /dev/ttyUSB0.
Is ther someone who can fill in the blanks? Or, point me towards really good documentation that explains how to do this.
I am running Ubuntu 11.04 on an external USB drive on a Dell D630 laptop.
My issue is I can't get my 3G modem to work. It is a K3770 Huawei modem.
When I plug it in after boot up it is not recognized at all as far as I can tell. (Which is not very far).
When I plug it in before boot up it shows up as a CD rom drive. I have usb-modeswitch is installed. (It was installed by default during the 11.04 installation.)
what to do to get this to work? Remember my Ubuntu is running on an external USB drive so anything that switches USB off even temporarily won't work. (I don't think).
I have JVJ 3G modem,one from Singapore. I have try out as [URL]... But it doesn't work. Has anyone try it before?
View 4 Replies View Related