My USB-modem and my freerunner phone is no longer recognized by fedora. Last time this happened I just reinstalld Fedora because I had no id�a what caused the problem. But now I recognized that virtualbox was the last package I installed before the problem occured.
I tried to uninstall virutalbox but the problem remained. Is there a way to reset all the network settings without reinstalling fedora?
I am having trouble for routing port 80 from a Billion adsl modem to a guest server in VirtualBox. There are quite few different changes from my last setup so I kind of confuse which one is wrong.
I used to use have the setup belowusing modem Linksys WAG354G use static ip 192.168.1.100 for my machine use static ip 192.168.1.102 for my guest VirtualBox server guest OS is serving http listening on port 80 i use bridge from my host OS for VirtualBox set my modem to direct all traffic on port 80 to 192.168.1.102 host OS was Fedora 11
now I useusing modem Billion 7404VNPX use same static address and configuration host OS is Fedora 13
main issue is I cannot reach the guest OS if I navigate to my modem ip address. (e.g. http://192.168.1.1) if I change the modem to direct all traffic to my host OS ip address (192.168.1.100) it works nicely.
I have tried to disable and enable the firewall without any luck.
I've got a problem with getting my VPN connection from my virtual machine working (a XP64 running in VirtualBox). I really need to get it working so that I can nuke my windows partition, and because I would like run linux programs while using my XP VPN connection (as I need to run some XP programs at school). I've found this manual on how to do it on Ubuntu, but I am doubt about how to translate it to Fedora (and I really prefer Fedora). [URL]
View 6 Replies View RelatedMy brother installed Fedora 8 on my 2004 Dell Inspiron 1000 laptop with a 56k MDC modem. I cannot figure out how to get the dial modem to work! Modem Device?, Baud Rate?, Flow Control?, Modem Volume?
View 1 Replies View RelatedI have a ZTE HSUPA USB Modem Model:MF636 which used to work great and then is not longer detected.
I am using Fedora 12 and was having problems with the modem not been properly detected and filed a bug, which turned not to be a problem of NetworkManager, but an issue with udev.
https://bugzilla.gnome.org/show_bug.cgi?id=603433
I followed instructions to edit /lib/udev/rules.d/61-option-modem-modeswitch.rules and then it worked fine.
Now the modem is again not properly detected. Here is a copy of the results from dmesg code...
I have tried restoring the file that I edited. It was back to the stated previusly reported. I also have tried to run an older kernel. Then I updated to the latest kernel available for Fedora 12. Nothing seems to work.
i have usb modem sierra 885 compass but i don't know how to install it, nor to make it work in fedora 7
View 1 Replies View RelatedI am running Ubuntu 11.04 on an external USB drive on a Dell D630 laptop.
My issue is I can't get my 3G modem to work. It is a K3770 Huawei modem.
When I plug it in after boot up it is not recognized at all as far as I can tell. (Which is not very far).
When I plug it in before boot up it shows up as a CD rom drive. I have usb-modeswitch is installed. (It was installed by default during the 11.04 installation.)
what to do to get this to work? Remember my Ubuntu is running on an external USB drive so anything that switches USB off even temporarily won't work. (I don't think).
I have JVJ 3G modem,one from Singapore. I have try out as [URL]... But it doesn't work. Has anyone try it before?
View 4 Replies View RelatedI can't using my usb modem on ubuntu 10.10.
I use vodafone usb modem, without detail information of what type or chipset used.Here is what I can collect, when I plugged the usb modem to laptop..
result of dmesg..
---start---
[ 956.873758] usb 1-1.1: new high speed USB device using ehci_hcd and address 5
[ 956.974318] scsi5 : usb-storage 1-1.1:1.0
[ 957.974336] scsi 5:0:0:0: CD-ROM HSDPA MMC Storage 2.31 PQ: 0 ANSI: 2
[ 957.975167] scsi 5:0:0:1: Direct-Access HSDPA MMC Storage 2.31 PQ: 0 ANSI: 2
code....
how can I troubleshoot the problem, so the usb modem can work properly.
I have a Compaq Presario 2100 laptop running Ubuntu 8.04LTS. It has a Conexant HSF modem/chipset, for which I bought the Linuxant HSF modem driver- 56K max.It is installed and it "functions",ie: it will connect to my ISP and I can start to browse (Firefox), but it will inevitably disconnect itself. At this point it is always down to "turtle speed of 4800bps".I have consulted with Linuxant Support and they suggested different modem init. strings - mainly different modulations - V34,V90,V92 w/variations. Nothing has made any signif. diff. They won't offer any further help.My question is: Could it be that Ubuntu 8.04 specifically, or Ubuntu of any version, is the source of the problem??
I have Knoppix 5.1.1 Live CD which loads up fine, and I was hoping to try the HSF driver with it, but I need to get Kernel Source pkg. and that will take 2+ hrs. to download by dialup , so haven't tried it yet.
How do I get my Bigpond internet (ZTE MF636 BP) USB modem to work with Ubuntu 10.4 LTS ?
View 1 Replies View RelatedOn my HP TX2500 laptop, dual-booting Vista and 9.04, Ubuntu installation found the WLAN and it works fine.I installed VirtualBox with Vista as the host and 9.04 as the guest. Wired Ethernet works fine but it didn't seem to find my WLAN. What more do I need to do?
View 1 Replies View RelatedI cannot make Virtualbox work in Ubuntu 10.04 (upgraded from Ubuntu 8.04). I tried both to install Virtualbox OSE from Package Manager and Virtualbox 3.2 downloaded from the Virtualbox site (32 bits version, as my OS). Installation is OK, but when I try to run it, I get an error message:
Error in home. virtualbox.xml (line3) cannot handle settings version 1.2-linux. Code: NS_ERROR_FAILURE (080004005). Virtualbox would be good because it allows running some Windows applications or games. Wine seems useless, only a couple of applications run in Wine and practically no games. It keeps warning me about DirectX etc. I can't understand why Wine exists at all.
i was trying to install mac snow leo in virtualbox but when i searched for wut i need to have i found this link when i entered the code it returned nothing so apparently i dont have it,im asking if theres a way i could get it or just get mac work in virtualbox?
View 1 Replies View RelatedI have tried to get several USB modems to work with Fedora without success. Some time ago I was able to get a Maxon BPS6 to work but I no longer have that unit. I have tried a ZTE 636 which is recognised by the system and have run usb_modeswitch to make it be recognised as a modem and not a cdrom. Seems that what ever I do the modem produces an error - unable to connect to modem.getting my modem working on a completely fresh install of Fedora 13
View 2 Replies View RelatedI've been using an old modem from 2007, which my ISP calls Type I. It didn't have wireless connectivity and I used pppoeconf to setup my connection - username and password and set it to connect at boot time and everything was fine till today. I bought a Type II modem from my ISP and had to return the type I modem to them. Since the technician had no knowledge of Ubuntu (or Linux in general), he configured the modem in Windows 7, tested that the connection was working, tested the wireless connection in my netbook running XP and then he left.
Now I can't connect through pppoeconf in Ubuntu (running 9.10). The terminal says eth0 is listed but the 'access concentrator' or something like that isn't responding (no other process was running at that time). I feel very vulnerable while browsing in Windows so I want to get back to Ubuntu ASAP. Oh, and here's the output when I run "dhclient eth0"
Code:
Listening on LPF/eth0/00:16:76:33:d2:70
Sending on LPF/eth0/00:16:76:33:d2:70
Sending on Socket/fallback
DHCPDISCOER on eth0 to 255.255.255.255 port 67 interval 7
DHCPOFFER of 192.168.1.5 from 192.168.1.1
[Code]....
I have a compaq mini 110-1000 with integrated 3g modem and natty narwhal. I bought a vodafone data sim card, I've configured the network manager but it doesn't work! All solution I found are possible only with the hp connection manager. but I've removed windows!!
This is what I see with "lsusb"
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 0461:4d6a Primax Electronics, Ltd
Bus 002 Device 004: ID 0a5c:4503 Broadcom Corp. Mouse (Boot Interface Subclass)
Bus 002 Device 003: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass)
Bus 002 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 10f1:1a0f Importek
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
When I install the latest F12 kernel, my F12 installation freezes immediately on boot. The previous kernel booted fine. It's a little strange, because if I edit the grub.conf to use the old kernel, the freeze still occurs.Is anyone getting Kernel 2.6.31.12-174.2.22 to work in virtualbox? (both yes and no answers would be useful here)Does anyone have any idea of the cause (and especially, why updating the kernel would cause the _old_ kernel to freeze as well)
View 14 Replies View RelatedI am doing a project for school to set up a Linux network in virtual-box. I have very little Linux experience and am struggling to make anything work. I am trying to get webmin to work but it won't connect. I followed the install instructions perfectly and everything seemed to work fine. I've opened any ports that it said to open. but I still can't get it to connect. When I enter https://myservername:10000/ it just try to load until it times out. When I try to ping that address it says not valid network address. I'm at a loss and this is due in a few days.
View 3 Replies View RelatedVirtualBox: So, with VB, testing out stuff without messing up your actual operating system (in my case Linux). (I had more to say but can't remember atm) Remastersys: Well, I think I MIGHT have a reason as to why Remastersys doesn't work for me. I think I might have downloaded the wrong repository thing. I downloaded:
[Code]...
I ask because of the word Lucid is in the sentence. What do you all think, should I un-install remastersys and downloaded the one with the word Lucid in it and see if that makes a difference as to whether the program makes a proper .iso file or not?
I'm trying to make a Huawei K3715 HSDPA modem work in Ubuntu 10.04.1. I plug it in, and it loads two mass storage devices (one CDRom containing the Windows software, and one 2GB drive that appears empty), but I don't really know where to go from here.
Note that I replaced the stock network manager with Wicd, as I find it more reliable in picking up wifi connections. I'm not sure if it's suitable for connecting the HSPA modem though.
How do i get a mc760 usb modem to work with usb_modeswitch in fedora 12.I am using virgin modile dsl Is there away to setup with wvdial to?
View 10 Replies View RelatedI have ubuntu 9.10 and want to give fedora a go through Live usb but how? I my cd dvd drive does not work and my virtualbox is not taking my usb pendrive.
View 2 Replies View RelatedHow to make the modem lights toolbar addon to work? They don't seem to work while online with Gnomes KPPP, and it would be nice to see them working while online.
View 2 Replies View RelatedI am running Fedora 12 on an Intel Core 2 Duo system.
I ran a software update which installed a new kernel (2.6.32.23-170.fc12.i686.PAE) along with many other things.
I am now unable to run VirtualBox which I had installed and running successfully before the update.
I tried removing and reinstalling VirtualBox from YUMEX, and rebooting. This did not help.
When I launch VirtualBox from a terminal, it produces the following output:
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: VBoxVMM.so: cannot open shared object file: No such file or directory
I'm not sure what it is complaining about. The files VirtualBox.so and VBoxVMM.so both exist in the /usr/lib/virtualbox directory.
What can be done to get VirtualBox working again on this system?
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
I have installed the KDE spin and am liking it so far. Except for the fact that I cannot get onto the internet. I rely on this ZTE USB wireless modem for internet and that just would not get recognized in Fedora. Plus, my Windows installation is down and I would love to keep it that way if at all possible.
I have followed a few instructions on this particular problem. I have modified the menu.lst file to account for the usbmodserial and product. The usb_modeswitch program has also been installed and the usb_modeswitch.conf file has been edited with the values I got from the 'lsusb' command's output.
But the curious thing is that when I actually execute the usb_modeswitch command, I get a message saying that there are no drivers for the ZTE device. Which means that I cannot go onto the wvdialconf part of it at all. Basically at this point I dont have a modem, according to Fedora. But it does get recognized as a ZTE device. That tells me that there is something right about what I have done so far and may only need to do a few tweaks here and there.
PS - I am based out of India and this is a Tata Indicom Photon (NOT Photon Plus) connection for which I have a USB device which acts as a modem.
i have modem HSPDA ( prolink PHS 100) but i don't know how to use in linux. I already to set password,user name and etc. in wvdial. but it still can't to connect to internet.
View 2 Replies View RelatedWhen I use Ubuntu, my DSL modem correctly gets the hostname I call my computer "mertensia", but I'm having issues with Fedora. Yet, when I look at the name assigned by the modem (using URL... in a web browser),I need the PC Name to be mertensia, because otherwise it will complicate how I ssh immensely.
View 4 Replies View Related