Fedora Networking :: F12: No DSL Connection \ Can't Connect To AT&T/Bellsouth's Dsl Modem?
Dec 8, 2009
I'm running F12 on a Toshiba Satellite laptop. I don't have any problems connecting to eth0 or wlan0 when I'm at work or when connecting to a variety of cable modems, but for some reason I can't connect to AT&T/Bellsouth's dsl modem at my house (can't connect directly, much less through my DI-524 D-Link wifi).Does anyone have any idea why? I've been through every setting I can think of and I've stayed on the phone with techsupport for AT&T and physically watched as they've pinged and reset my modem, so signal into the house/modem is good....and I can hit the modem's IP and go through all of the configuration settings and everything from Bellsouth says that I'm connected and online, but when I attempt to go to another website like google or yahoo or fedora.com, I get a message telling me "Server at ******** not found."After spending 2.5 hours on the phone last night with tech support, I came into the office tonight and hooked right up to TruVista's (cable) network.
View 5 Replies
ADVERTISEMENT
Jul 3, 2011
newly installed fedora 15 is not able to connect to internet i have broadband connection with wireless modem my laptop is connecting to wireless modem network. but i am not able to configure pppoe connection on it PS: i am able to connect to internet when using wired connection from modem
View 2 Replies
View Related
Jan 28, 2010
Earlier today I decided I wanted to switch back over to ubuntu, my internet was working fine, but as soon as i reformatted to Linux my modem stopped showing any lights under ADSL - TX and RX. and I can't connect to my wireless connection anymore. What should I doooooooo
View 1 Replies
View Related
Feb 8, 2010
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
View 4 Replies
View Related
Apr 28, 2009
I'm trying to use Speedtouch USB modem.
According to [url].
After a bit of fighting interface works I can ping any domain name or ip address. I can even connect to web server via telnet, for example telnet www.org 80. I can see the response from Web server, but Mozilla says that it is offline, System Update says that no connection.
What can be the problem if manually I can connect but any Gnome GUI program says you are offline?
View 1 Replies
View Related
Jul 13, 2009
how can i connect to the internet using modem card?
Intel d915,3GHz pinless,Lucent Modem
View 6 Replies
View Related
Oct 9, 2009
I am using samsung mobile (sgh-b220) in order to connect to the internet. I can easily connect on windows system , using PC studio software. I tried KPPP, wvidial none solved the problem. (It successfully dials the number. Put pppd connection will be terminated)
Some how I managed to scan modem communication taking place on the windows system, and tried exact commands on linux system still I am not able connect.
I have attached log files from windows machine. wvidial.conf, wvidial out put file along with this post.
View 3 Replies
View Related
Feb 18, 2011
I recently installed linux Fedora 14.... how do i have internet connection via my mobile modem...? i conect via usb
View 2 Replies
View Related
Apr 30, 2010
I have a huawei e230 modem that used to work pretty good until this week. It has always been much slower on linux than windows but I am not complaining because windows keep disconnecting ever hour or so, while linux can stay connected over night without problem. The modem is still recognized but when I try to connect it suddenly disappears.
View 1 Replies
View Related
Jan 4, 2011
I have just installed Fedora 13, everything seems to work but the Internet connection. 3 devices are shown in the "Network Configuration" window (devices tab)(under "Network Device Control")"Network Cards" (wired) (wireless) and even the Motorola Modem from the ISP as well as all of the primary and secondary "DNS's", but will not connect! I have Broadcom devices on a Dell Latitude D600 Laptop. On the upper right of the desktop, the connection icon shows when I plug and unplug the cat5e, so it sees something there, but will not connect.
View 10 Replies
View Related
Sep 19, 2009
My broadband internet connection came with a Nokia-Seimens C2110 Adsl modem. Please help me connect the modem through USB cable as the ethernet card is used to connect my computer(Asus- P5RD2 VM motherboard) to a different computer on LAN. I am in a fix and have no clue how to proceed.
View 1 Replies
View Related
Mar 12, 2009
I've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do
Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?
View 10 Replies
View Related
Jun 14, 2010
I use Ubuntu i can not work internet connection Please help me search for a solution but did not find
Use the USB modem model x060s.
View 3 Replies
View Related
Mar 6, 2010
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
View 3 Replies
View Related
Dec 24, 2009
After some wonderful days with fedora with my CDMA mobile internet connection (the only connection where I live) NetworkManager can't connect anymore.
I tried to delete the settings and rewrite them without success.
I have A Novatel Ovation U720 CDMA/EDVO USB modem.
I can connect with wnXP and kubuntu, but can't connect with fedora anymore.
I wish to make the definitive move from kubuntu to fedora... but I should wait.
View 2 Replies
View Related
Feb 25, 2010
I have updated the system this morning and the vpn stopped working!It gives me an error: invalid secrets.I use network manager to connect to a pptp vpn connection, I use fedora 12.Does anyone know the problem?
View 2 Replies
View Related
Nov 27, 2010
I have my desktop computer (running F13) configured to accept ssh over port 22 via the firewall configuration tool. If I type ifconfig -a, this computer, which is running on my wireless network, tells me:
Code:
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
However, if I go to my laptop computer (also running F13) and try and ssh into the desktop, i.e. ssh icthy@192.168.1.100, I get this response:
Code:
ssh: connect to host 192.168.1.100 port 22: Connection refused.
I guess I am confused to what is blocking the connection? Is there another means on F13 other than the default Firewall? I haven't really messed with the network at all. For what it's worth, I am hoping to set things up so I can just ssh into the computer name, (ssh icthy@desktop) eventually, but want to start with the IP. So, can anyone offer a hint as to what I can look for that is blocking port 22?
View 3 Replies
View Related
Feb 14, 2010
I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies
View Related
Mar 21, 2010
Generally I don't like just asking stuff but just can't crack this one. I got a debian machine. My internet connection is on a 3g usb modem. It connects perfectly. Then I downloaded DHCP 3 and then configured it so I got 172.16.0.0 network address with gateway on 172.16.0.1 (set by DHCP) 172.16.0.1 is also the eth0 address and is assigned as fixed by DHCP. With the modem not connected the other PC connects no prob, gets the default gateway and get assigned an ip by DHCP and there is a proper connection with APACHE serving pages. So it is all grand. Where my prob comes in is that I am not able to get traffic from the modem through to the other PC, and at times the modem would not be used as default connection with eth0 up. Restarting the modem fix this but then also drop the assigned gateway address.They are connected directly via crossover cable. The modem is setup as ppp0 according to ifconfig and then ethernet as eth0 and I tried some masquerading allowing all traffic through but does not seem to do the trick.
View 1 Replies
View Related
Jul 29, 2011
I've just spent 2 days of extensive lurking how to solve this problem. Namely, i have ZTE usb modem, model MF626 T. The sofware provided with it works only under windows. What i tried first was to download hso.ko module (copied to the /lib/modules/`uname r`/kernel/drivers/usb/serial/). Then i downloaded hsolinkcontrol and HSOconnect. Unfortunately, i didn't get those /dev/ttyHS* ports that should appear. Only /dev/ttyUSB*. I blacklisted option module. Then changed occurences of ttyHS* to ttyUSB* in .py sources for HSOconnect. what i get is the popup interface GUI that has "connect" button disabled. Then i tried to set up connection via gnome-ppp. The usb modem was automatically detected as /dev/ttyUSB1. But when i supply telephone number that i got with the stick, i get message after "Sending: ATM1L3DT*99*" ->"no carrier found". Then i tried to copy the other two modules i found on the net-airprime.ko and usbserial.ko. I've renamed the option.ko and old usbserial.ko in order to use them later if needed. And also i've put in /etc/udev/rules.d/
some scripts i've found on net, used to mount and unmount ZTE modem. None of all that worked, and somehow i have the feeling i've messed up everything. What i just posted above is the sum of everything i googled out. I would be very glad if someone would help me out with this. I usually like to spend some time lurking and googling, but this is simply taking too much time...
View 2 Replies
View Related
Jul 25, 2010
I have an ADSL Internet connection with static IP.I connected through PPPOE from my modem to my ISP.I need to ssh from outside of my home to my home, But i don't know to use which connection between my computer and my modem.(dhcp ,static , bridge or ....)
View 1 Replies
View Related
May 2, 2010
Connection is possible only after few reboot. Preferences I tried all.
View 9 Replies
View Related
Jan 9, 2011
I have a usb modem which I plug into my ubuntu 10.10 system for a dial-up service. The modem is recognised by wvdial and dials properly, but the connection is not established.I get "Unable to run /usr/sbin/pppd" (although pppd is certainly in /usr/sbin), followed by "Check permissions of specify a 'PPPD Path' option in wvdial.conf", and finally "Connected, but carrier lost", then it gives up.
View 5 Replies
View Related
Aug 6, 2011
I have a MTS MBlaze USB dongle, with which I can connect to the internet. The question is, how do I set up a ssh connection accessible over the internet so that any one can connect to my PC through that (using valid username/password provided by me of course) ? If not possible, what do I need to make this possible ?
View 3 Replies
View Related
Apr 8, 2010
My wireless modem has disappeared from the connection list at the top of the page. Strangely, a guest connection on that same modem is still visible but won't connect. I added the modem back in as a new connection and it was added to the list but it was greyed out and I still can't connect to it. The problem could, of course, be in the modem but I have no way to check that. Reset is not working. Lan connection to the modem works fine. This is the second time this has happened in the last week and I ended up reinstalling Ubuntu. This gave me back the wireless connection. I don't really want to have to do that again. Is there anything I can check in Ubuntu?
View 1 Replies
View Related
Apr 22, 2010
how to connect my modem to the Internet, the help file on my Ubuntu 9.10 does not match the features available. I am using a modem from Starcomms (a local CDMA services provider in Nigeria) made by Epi Valley.
View 4 Replies
View Related
Sep 26, 2010
i wanna to connect to internet with USB DSL modem .
View 1 Replies
View Related
Apr 20, 2011
I have been working for the last week trying to connect my serial hardware external modem (courier 56K v.everything) within an Ubuntu 10.4 environment. I live in the boonies where I am presently forced to use dial up, so this has got to work, else I cannot update Ubuntu or download software. After trying various suggestions, which my very limited Linux skills fail me, I opted for the suggestion that I download gnome-ppp, install and then use it. Seeing how I cannot download it through Synaptic Package Manager (which I was advised to but can't as it is my Linux computer that I am trying to connect).
I downloaded the zipped file (gnome-ppp_0.3.23_Oubuntu2.tar.gz ) to a USB stick, copied it to the home directory and then extracted it, wherein a new directory was created with many files in it. From here I have been unable to install it through the command line (not sure how), nor have I been able, as was suggested, to install it via the Synaptic Package Manager (can't get it to see the file, not sure how to). I need explicit (Newbie) instructions on how either to connect the modem without gnome-ppp, or instructions on how to get gnome-ppp installed.
View 6 Replies
View Related
May 21, 2011
I am new in Ubuntu Linux. I am using Acer Aspire 4740. And I have purchased HSDPA Mobidata as internet modem. But I cannot connect it. How can I connect it and use internet using this modem?
View 2 Replies
View Related
May 26, 2011
i have a samsung laptop.i recently installed ubuntu 11.04 on it.
I have a huawei WA1003A modem .In windows i connect to my modem wirelessly using (WLAN) facility after connecting it shows it has limited connectivity with the modem and then i connect to BSNL using username and password..then i get connected to internet..
In ubuntu I conncted to internet using the cable by making a new dsl connection i provided my user name and password. and then i switched on the modem connected the cable and connected to dsl connection and internet was connected.. . i want to connect it wirelessly.
View 2 Replies
View Related
