Ive got two connections, one is the eth0, that is the LAN connection to the DSL modem (192.168.1.1) and the other is the DSL connection that I connect to use the internet. Now I can only connect to one of the two at a time, so when I'm connected to the internet, I am not able to access 192.168.1.1. How do I use the two simultaneously?
View 8 Replieswith installing Modem Huawei E170. my modem can not connected and suddenly remove from my PC. i am using Ubuntu LTS 10.04.
View 1 Replies View RelatedI have installed the 3 packages required for MTS Mblaze 3G Modem to get connected to the internet.
Quote:
1. usb_modeswitch
2. usb_modeswitch-data
3. wvdial
Here is the "/etc/wvdial.conf" file that gets generated when I do the "wvdialconf"
Code:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = yes
[code]...
But now when I open Mozilla or Google Chrome Internet Browsers, I am not able to connect. Moreover, I also tried to ping to [URL] but it is not pinging.Is it related to some Network Manager settings. As when I look at the Network Connection Icon, it shows CROSS i.e. not connected to any network...
im using mandrake linux 2010.0 , and i connected my router cable (dlink) to the computer, and it detects without needing configuration to the 'eth0' and it shows me the ip the dns and gateway, everything ok, but then i go in firefox it says that i couldent connect because theres no internet connection,ive looked at the proxys the firewall, tried to uninstal the eth0, the ppp0 and install then again and still the same,does any one have an idea of what could be?
View 9 Replies View Relatedi put a fresh install of 9.10 onto my laptop, i got online set up my network, and can see my other computers. when i open firefox, it wont connect to any website, what should i do?
View 2 Replies View RelatedWhen I connect my PDA (AT&T Tilt with Windows Mobile 6.1) to my desktop via USB (my desktop is connected to Internet via LAN), I can't access Internet from my PDA. How can I share Internet from my desktop with my mobile phone?
p.s. I can only find how to access Internet on a desktop using a mobile phone as a modem.
I am trying to setup vpn to access folders and files from my school. VPN is connected now through networkmanager, but I don't know how to actually gain access to the folders on the school server.
Is it through nautilus? Or the "Connect to Server"? The school provides addresses that begins with \.. something, and I have tried typing it in to nautilus and the "Connect to Server" but it fails to connect.
I have googled this but all I find is how to connect to vpn manually or through networkmanager, and not how I then can access the folders on the server.
I've been using my upstairs computer with no problems recently up until this evening, when I rebooted it did an automatic scan of my disks, so I left it to it's thing and when I came back ubuntu had successfully booted, and had seemingly successfully connected to my wireless network as usual.
I've been through the wireless troubleshooting guide, paying special attention to sections 4 and 6 but to no avail, while I'm apparently connected, and have been assigned an IP by my router I'm unable to access anything outside my computer, including the router itself. This happened before, however I solved it by reinstalling ubuntu, and I'd rather not do that again!
output of ifconfig
eth0 Link encap:Ethernet HWaddr 00:1c:25:38:8e:de
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[Code]....
I am facing very strange problem with my Dell with WiFi card (04:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100) It seems I am connected to the WiFi but can not access internet I have to disable networking and re-enable it to access internet.
Network configuration
Quote:
-network
description: Wireless interface
product: Wireless WiFi Link 5100
vendor: Intel Corporation
[code]....
I have installed ubuntu 10.04 and STA wireless driver. I am using a wimax modem, the wireless is connected (have IP addresses) but I do not have access to the internet.I also have installed a windows XP as a guest OS (ubuntu is the host) on vmware. By using a bridged network connection, I am able to access internet. So I guess the problem is related to the ubuntu wireless driver.
View 9 Replies View Relatedif i'm connected to my wireless network it only gives me internet acces for a few minutes. The connection with my network stays but i have to close it back of and reconnect before i get back online.
View 1 Replies View Relatedthe bsnl modem cannot access the ubuntu 9.10
View 2 Replies View RelatedI have a usb modem : huawei e220.I am using ubuntu 9.10. I can't access the internet using it. I made a connection form the mobile broadband tab but every time it disconnects .Ubuntu identifies the modem but every time i try to make a connection it fails.
View 5 Replies View RelatedIs there away to view wireless access points without being connected. I am having trouble getting connected to my wireless DSL modem. I have no problems connecting with Windows Vista. Just can not get Ubuntu 9.10 to connect. iwconfig says no associated with access point. I can connect with ethernet cable.
View 3 Replies View RelatedBackground infoMy laptop (MySN MG6.c) is dual-booted with Windows 7 and Ubuntu 9.10, and connected to the internet through a router (Digitus DN-11004-O), which is set-up to use DHCP. The internet connection works fine under Windows, and my previous laptop, which also ran Ubuntu 9.10, had no problems connecting to the internet through that router.The network adapter is an Atheros AR8131 PCI-E (also detected as Attansic under Ubuntu)stem infoResults from running various diagnostics (I have removed the output that relate to the wireless connection, as I don't use it):
Code:
$ uname -a
Linux valyria 2.6.31-14-generic-pae #48-Ubuntu SMP Fri Oct 16 15:22:42 UTC 2009 i686
[code]...
I am using ubuntu (11.04) here, when i connect Bsnl broadband link(wired connection). Internet is connect automatically But unable to instal, upgrad and access Internet pages ..
View 1 Replies View RelatedWhen I type my modem configuration page IP in browser instead of showing configuration page it shows default web page for apache.What's wrong?Is there any IP conflict?
View 1 Replies View RelatedSo i have a d-link modem and the DHCP server is not running. I need to access the internal config to do some troubleshooting. IP is supposed to be 192.168.1.1, but I only have my DSL ppoe IP, and can not access it.
View 3 Replies View RelatedI have an external hard drive connected to my router. From Windows I can access it, but from Ubuntu I can see the hard drive, but when I try to access, I'm asked for a password. However my network does not have a password neither the hard drive.
What must I do?
I have internet from KabelBW (cable modem which doesnt require any username,password,dns,mac...) they gave me a cisco modem, I connected it with my asus router and it has been working fine since today! when I woke up I turned on my lap top and loged in skype, but I couldnt open google, then I tried yahoo..nothing! I havent made and changes yesterday! I dont know what is wrong! I am new to ubuntu and I dont know what to do! when I connect directly to modem I have internet it works good, but when I connect through my (LAN or Wireless) router I cant view web pages. I have tried to google for the answer but all the answers are for windows OS versions! I tried to restart lap top, and the router 100 times but nothing!
View 9 Replies View Relatedcan't access internet. The up and down icon appears by the network connection (upper right hand corner). When I review connection properties, I see that the computer has a valid address, subnet, gatway, dns, etc... But it still can't connect to the internet. I can't ping external addresses either. But I can access internal addresses (local router).
View 2 Replies View RelatedI can connect to my school's wireless network using the standard network manager, but often (not always) it repeatedly disconnects and reconnects every few minutes. Occasionally it also prompts me for the security information again (even after it previously connected successfully).
By running iwconfig when it's on the fritz, I can see that it's often switching access points for the network - which is what I think is causing the problem. It disconnects and reconnects even when the signal strength for the current AP is fine, and it will often switch to an AP with a weaker signal strength.
$sudo lshw -C network
Code:
description: Wireless interface
product: Realtek Semiconductor Co., Ltd.
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:05:00.0
logical name: wlan0
[Code]...
I just installed Lucid Lynx Ubuntu on my computer. I love it, but I do not see how to configure my dial-up modem and connect. I'm hoping it's still possible. Here's my hardware.
333mHz Pentium III
Lucid Lynx 10.04 LTS
US-Robotics 56K Faxmodem External
256mb RAM
ISP OmniLEC
I have fedora 12 installed in my laptop. Can anyone plz tell me how to connect nokia E51's modem ( via. Data Cable) to access GPRS !
View 2 Replies View RelatedI have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.
Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).
I am wanting a computer with an external dialup modem (ppp0 modem through a com port /dev/ttys1) to act as a gateway to the internet, forwarding internet traffic through ethernet (eth0 is set to static 192.168.2.2) to a router (the router is 192.168.2.1) where it will be broadcast to other wireless computers like my laptop (192.168.2.3). I've had this setup until recently when the gateway computer (the one with the modem) died. Now I'm replacing that machine with another box and an install of Ubuntu 10.10 but so far things aren't working for me.
Success so far:I have dialup access working on the new box. Took me a while to work out the configuration for getting dialup working, though the IP address is Dynamic (or it won't stay connected), "Check carrier line" is off, and "Ignore Terminal Strings (stupid mode)" is on in order to successfully connect and stay connected to my ISP. I also had to make my normal (non-root) user "lancer" a member of the "pid" group (the reboot) in order to use gnome-ppp as non-root. The laptop (192.168.2.3) is successfully connecting to the router (192.168.2.1) as I can see the router configuration page when I type http://192.168.2.1 into the laptop's web browser. This setup is unchanged from how I had it before when this was previously working and I don't want to change how the router itself is set up. What I want is to know what to fix in the new box in order to get it connected to the router (through ethernet) and bridging the internet through.
My problem is that whenever I plug in the eth0 from the gateway (192.168.2.2) to the router (192.168.2.1), Ubuntu's automatic plug-me-in network detection kicks in and I find my dialup no longer working through some kind of IP conflict (at least that's what I think it is). Maybe I don't have the "gateway" correctly assigned? (in the gateway computer for the ethernet connection, I had it pointing to itself as I don't know what to put for "gateway IP" as that is automatic So, just to check my connection, here I am pinging google (from the gateway computer which has the dialup modem) once a dialup connection has been made.
Code:
lancer@lancer-desktop:~$ ping www.google.com
PING www.l.google.com (74.125.237.17) 56(84) bytes of data.
64 bytes from 74.125.237.17: icmp_req=1 ttl=55 time=179 ms
64 bytes from 74.125.237.17: icmp_req=2 ttl=55 time=176 ms
64 bytes from 74.125.237.17: icmp_req=3 ttl=55 time=158 ms
[Code]...
What do I need to do in order to make Ubuntu of my gateway computer stay connected to my dialup but also simultaneously share an ethernet LAN to my wireless router and feed traffic to the other computers from there? I have googled this but some of the most promising instruction (e.g. http://www.ubuntugeek.com/sharing-in...in-ubuntu.html) call for packages like dnsmasq or ipmasq which seem defunct now in Ubuntu 10.10. Other pages seem to suggest dual-networks "can't be done" in Ubuntu [URL].. (what!?! I had it before my other gateway died)
My router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?
View 5 Replies View RelatedI installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies View Relatedfind and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....