Fedora Installation :: How To Install Wireless Isdn Modem On FC4
Jan 29, 2009
I have FC4 installed on my system and my internet connection is a ADSL through a Router but i have a wireless isdn line as backup connection the modem i use is LG LSP 340E which is a limited mobility cdma phone with in built modem, the supplier and manufacturer has given drivers for windows only. How to install this modem onto my system, I had tried auto detection but it didn't work, I had connected the modem to the serial port in my system.
View 2 Replies
ADVERTISEMENT
Apr 26, 2010
how to install the modem Sierra Wireless AC775 on Fedora Core 6. Fedora 6 detects the modem, but does not establish it as a device. And no entries in the directory /dev about modem. Startup Fedora 6 said that the initialization eth1 failed because no device serial_cs.
View 3 Replies
View Related
Jul 29, 2010
how to install broad band wireless modem (netgear)ADSL2 on Fedora core 7
View 2 Replies
View Related
Jun 20, 2010
I run in some trouble with my isdn card after switching from fedora 10 to fedora 13 (new installation, no upgrade) I made a default installation, after install and reboot/update I noticed that isdn4k-utils is not installed and I installed it manually. For setup of my isdn card I used system-config-network. But activate isdn (load kernel modules) fails, also with /etc/init.d/isdn start There is no isdn device: output cat /proc/net/dev
Code:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 945856 2413 0 0 0 0 0 0 945856 2413 0 0 0 0 0 0
eth0:19685713 159678 0 0 0 0 0 0 87669282 139783 0 0 0 0 0 0
output lspci
Code:
05:00.0 Network controller: Elsa AG QuickStep 1000 (rev 01)
I suppose I forgot something at installation time. With fedora 10 everything works fine.
edit: part of /var/log/messages:
Code:
Jun 20 08:46:14 videoserver system-config-network[22408]: rm //etc/sysconfig/networking/profiles//default/resolv.conf
Jun 20 08:46:14 videoserver system-config-network[22408]: ln //etc/resolv.conf //etc/sysconfig/networking/profiles//default/resolv.conf
Jun 20 09:46:24 videoserver kernel: ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
[code].....
View 1 Replies
View Related
Jun 8, 2011
Is it safe to get upgrades via wireless broadband modem?
View 1 Replies
View Related
Jun 8, 2011
Is it safe to get upgrades via wireless broadband modem?
View 2 Replies
View Related
May 7, 2010
How do I installed a sprint novatel 3g modem? I see sprint under the mobile broadband tab when I create a new connection, and it shows all the right information, but I never can connect.
View 1 Replies
View Related
Dec 10, 2010
The problem is I have a wireless Belkin router which I can connect to, but after being connected for a few minutes the net disappears (cuts from the router) and my laptop will have to reconnect again to the router for internet to work again. After a few minutes (or seconds in some cases) the connectivity loss will happen again over an over.
How to fix this problem or some things I can try, I've tried updating to two different firmwares, two different channels and resetting the router. The biggest problem I find is that this happens on both my laptop, another laptop in the house and also my tablet PC but doesn't happen on two other laptops in the house, I've also tested with windows 7 and Ubuntu with my laptop.
My laptop wireless card is Atheros AR9285 802.11b/g/n WiFi Adapter
View 1 Replies
View Related
Feb 14, 2011
I have configure a UTL modem in fedora 14.
First I confiigure /etc/wvdial.conf file(wvdial is installed)
As:
Then i enter wvdial but i got error as:
View 1 Replies
View Related
Mar 23, 2011
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
View 1 Replies
View Related
Jun 28, 2010
I have an old Brooktrout ISDN fax card on BRI used mostly for receiving faxes. It works with windows fax server software which sends faxes to different e-mail boxes according to telephone number on which fax was send.
Since card is getting rather old and I don particulary like server software I wonder has anyone got any practice with linux fax servers. What I need is ISDN fax card and software which is able to save fax as a picture to file and somehow retain telephone number (filename or directory name). Sending picture by email is than trivial task.
View 3 Replies
View Related
Jan 25, 2010
I wish to install a modem to permit dial in access (ie to be able to access the system remotely). The modem I have is an external modem on the 9 pin serial port. What configuration would I need to perform on the server?
View 1 Replies
View Related
Jan 13, 2011
I recently downloaded the latest minimal Ubuntu ISO from the official download page.
Is it possible to do a minimal install if I do not have Ethernet capable internet?
I use one of those 3G (cellular) USB modems from companies like Verizon. Basically, it's a cell-phone, with the phone component taken out.
I did something similar with Debian recently, but I had to install the kernel along with the 'dpkg' package, to the HDD. From there, I had to reboot into the core system, install the packages like ppp, wvdial, etc, and then continue with a fresh install of the rest of the system.
There doesn't seem to be a way for me to either install the core files to HDD, or install the internet connectivity packages in the live environment for my modem.
View 9 Replies
View Related
Apr 25, 2010
I have just moved over from MS to Linux and so far I am pretty happy (couple of frustrations along the way, but nothing I could not sort out so far).
Except this little bit that has me bogged down. I am trying to get my HS2300 HSDPA wireless modem to work, but I am a little stuck here.
I found a post that I should get the HP-WMI module to load. That was a post on an older kernel and this guy mentioned that is should be included in newer versions of the kernel.
Modprobe did not deliver any results, however an "lsmod |grep wmi" delivered the following:
Obviously I need to look for hp_wmi, but so far I cannot get anything to work.
View 2 Replies
View Related
Apr 21, 2009
I have installed Fedora 8 on my laptop. My laptop has a " Network controller:
Broadcom Corporation BCM94311MCG wlan mini-PCI " wireless Card.
I want to get the wireless working. I did an 'lsmod' and I found that the modules for this card is not installed. I tried to start Network Manager, but network manager cannot connect to wireless but it cant. How and where can I get the drivers for this and how do I install those modules. My laptop is a Dell vostro 1400.
View 8 Replies
View Related
Jun 26, 2010
i have dell mini 10 in fedora 13. How i find the wireless driver and install, this the list of hardware:
Quote:
[*******@**** ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
[code]...
View 3 Replies
View Related
Feb 3, 2010
Steps for using scan Modem to Identfy dial up modem?
View 1 Replies
View Related
Nov 8, 2010
I have a modem PROLINK PHS 100. sometimes when I plug in the modem, can be used. sometimes there is no reaction at all. What should I do.
View 2 Replies
View Related
Jun 18, 2009
During the installation process, configure the network installation process requires, as a result of my wireless network card can not be drived, It is not possible to continue with the installation,please help me.
View 5 Replies
View Related
Jun 7, 2009
i have download all the drivers for iburst usb modem but it is not installing.
View 1 Replies
View Related
Dec 23, 2010
am using fedora 13 and would like to use my modem to access internet, install this modem The modem is a Huawei model E160
View 1 Replies
View Related
Apr 14, 2009
I have just in stalled fedora 10 on my system and need help in connenting my wireless and lan ports as they arent working. i use an compaq c700 series. any tweaks available? cos i can only acesss the internet via a usb modem.
View 6 Replies
View Related
Aug 18, 2009
I want to install conexant modem in fedora 11 I have installed modem with this guidance [url] But I have a problem When I want to run hsfconfig .This problem is Building modules for kernel 2.6.29.4-167.fc11.i686.PAE, using source directory /lib/modules/2.6.29.4-167.fc11.i686.PAE/build. Please wait... done. Warning: no device detected by hsf driver - HDA modems may require reboot Note: HDA support not compiled in the driver Note: kernel module snd-via82xx-modem overridden by hsfmc97via Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis Note: kernel module snd-atiixp-modem overridden by hsfmc97ati. My modem is conexant hsf modem and I installed in fedora 9 and 10 without problem.
View 10 Replies
View Related
Aug 19, 2009
i have usb modem sierra 885 compass but i don't know how to install it, nor to make it work in fedora 7
View 1 Replies
View Related
Mar 22, 2009
I am unable to install a ZTE AC8710 CDMA Hi Speed Modem on Fedora 10.I have somehow found the Linux Drivers but am unable to compile them as I do not have the required Kernel Headers which I can't download in Linux because my Internet is not working.I have tried the entire process of trying to add the Device ID and setting up xvdial but I am unable to find the ttyUSB or USBtty or USBacm in /dev.
View 7 Replies
View Related
Aug 16, 2009
How use my nokia n73 mobile as a bluetooth modem?
View 4 Replies
View Related
Sep 19, 2009
My USB-modem and my freerunner phone is no longer recognized by fedora. Last time this happened I just reinstalld Fedora because I had no id�a what caused the problem. But now I recognized that virtualbox was the last package I installed before the problem occured.
I tried to uninstall virutalbox but the problem remained. Is there a way to reset all the network settings without reinstalling fedora?
View 3 Replies
View Related
Jun 5, 2011
I have USB Modem ZTE AC2726 . I am always Connect using Wvvdial or Network Manager , it Works Fine , But I want to do that when computer Booting it can auto start but i can�t do this . i have use many rules such as /etc/rc.local or udev rules to failure .I am using Fedora 14.
View 3 Replies
View Related
Jan 5, 2010
I have failed to install an AT&T Sierra Wireless Aircard 881 on a Compaq 8510p running RHEL5 Server (Linux version 2.6.18-164.9.1.el5,gcc version 4.1.2 20080704, Red Hat 4.1.2-46. )
As seen in the dmesg output below, the OS detects the modem, connects it to ttyUSB0 - ttyUSB3. However, kppp is unable to access the modem.
I have followed Sierra Wireless instructions located at sierra wireless's website. (I would post it, but I've not made enough posts yet to link it in this message.) However, I was not able install the TRU-Install patch. The unusual_devs.h is absent on the machine, so patching was unsuccessful.
I'm stumped on what to try next. Is there a FAQ or guide on how to get a 3G modem running with RHEL5 Server? Ideally, I'd like to find something like the Internet Connection manager on Ubuntu. The modem works on that distro with no problems. I'm not able to migrate due to application and security certification dependencies on RHEL5 Server.
lsusb output:
Bus 009 Device 001: ID 0000:0000
Bus 008 Device 002: ID 1199:6851 Sierra Wireless, Inc. AirCard 881 Device
Bus 008 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 007 Device 001: ID 0000:0000
[Code].....
View 1 Replies
View Related
May 17, 2011
I switched from windows to Ubuntu 10.10. But I'm not getting along with it as well as I expected I would Specially cause I'm not getting the best out of it due to limited web connectivity. I used to use a usb WiMax modem back in windows (which is also supposed to be supported by linux as my service provider said) for internet. But I'm having a hard time configuring it on my Ubuntu. The modem works fine but I'm failing to install the drivers [url]. I used my cell as a temporary modem to get help from the web.
I downloaded:-
i2400m firmware 1.5.0
WiMAX Tools 1.4.5
WiMAX Network Service 1.5.2
According to the documentation, I'm supposed to install the linux kernel 2.6.35 which Maverick comes with anyway.
Then comes the part to install the firmware. The command I used was
Code:
But unfortunately and annoyingly the result is
Code:
I didn't get it. Am I missing any package or something?
View 1 Replies
View Related
