Fedora :: Mouse And Keyboard Doesn't Work At Login Screen?
Apr 8, 2010
Got myself in a bit of a squeeze here. I was messing around with the Xorg install on my Fedora 12 system. I ended up reinstalling it. Now my mouse and keyboard work fine in single user mode / terminal. But if I try and boot to X they dont work at the login screen. HAL and udev are booting. Ive done a udevadm monitor test in single user mode and its seeing the devices connect and disconnect. Ive also tried both USB and PS2 devices. Same issue. Ive tried playing with xorg.conf and generating it with Xorg -configure :1 I dont know to use to fix it. After banging my head against the wall for 20+ hours I decided it was time to ask for help. m just Lynxing around the web at the moment =X
View 2 Replies
ADVERTISEMENT
Jun 11, 2009
I downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
View 11 Replies
View Related
Jan 22, 2010
I have a Logitech Wave keyboard and mouse for my computer. I am not sure which version of Ubuntu I am running on but I think it is 6.10. When I boot up my computer I can go into the BIOS and earlier today it would even let me press escape to seee which operating systems I could boot. Now it no longer lets me see the operating system I have (which is why I cant say which version of Ubuntu I have). It takes me to the log in page and asks for the username and password but I cant type and I cant move the mouse. Earlier I could also use Alt+F1-F12, but this is no longer working either so it just sits at the login page and nothing works at all. The computer that is having this problem is very old it is a Proteva and when I opened up the actual computer the processor says:
At startup the computer says that the processor is a: AMD K-6
I know that the BIO's are to old for Ubuntu to run properly because at startup it also says that: "ACPI :
BIOS age (1998 ) fails cutoff (2000), acpi=force is required to enable ACPI" it also says that: "ACPI : unable to load the System Description Tables."
I have'nt used this computer for about a year or two, but the last time I used it it worked perfectly fine. I have been seeing questions on the forums similar to mine, but their problems are on other versions of Ubuntu and their mouse's are said to work fine. I cant try any of the solutions for the problems I have read about because I cant open the prompt that you get when you are at the log in screen and press F2. I have no idea what to do.
View 2 Replies
View Related
Dec 16, 2010
When I start ubuntu I can't use my mouse and keyboard. It works in a second when the log in screen appears but then it freeze. It works in bios, grub and safe mode. I use mx518 and ace kl 400.
View 9 Replies
View Related
Apr 3, 2011
My screen is frequently freezing and even the keyboard or mouse doesn't work. I've been told to read the logs, But I don't know where thy are or what to look for?
View 3 Replies
View Related
Nov 10, 2009
It's two days now I'm in deep troubles after my last "yum update". The system boots as usual, the graphical login pops up the normal way but no input is handled by either the internal keyboard (the system is a laptop), the mouse pad, the external USB mouse and keyboard.
The hardware itself seems to be working as I can pop up the BIOS menus and even edit the GRUB booting line. But, after GRUB there's no possible input. I've tried to boot the system with the Fedora 11 DVD, rescue menu and then chroot. This in order to run a "yum update" in the hope that the problem was in some broken update. No chance: there's no update.
My questions are:
1. Is there a way to boot Fedora withou any graphical interface from GRUB (or anything else to skip the KDE)?
2. Is there a way to have the (cabled) network activated at boot *before* the graphical login?
3. What the he** is happening to my otherwise pefectly working laptop?
View 8 Replies
View Related
May 10, 2011
I have a ubuntu loaded in KDE and this is in dual boot with Windows vista. I was "upgrading" my Linux (through update manager) when my computer just shut down. And when i restarted the computer to login to the Linux all I got was blank screen. I logged into recovery mode and selected the option to fix the packages. I rebooted my system and then again logged into the Linux. This time I could get the login screen but my mouse as well as Keyboard was not recognized. Essentially i cannot type or scroll and cannot login into Linux.
View 2 Replies
View Related
Jun 30, 2011
As the title says i have this error on both my main computer and my laptop. For my main computer see this post, that is when it happened. viewtopic.php?f=30&t=65743
I run the updates on my laptop a while ago and decided to restart it to check if everything went okay. It seems not.
The only way i can get on the desktop, is to choose the recovery mode, su to user and startx.
This is a common error during booting on both computers. Starting the hotplug events dispatcher: udevderror binding control socket, seems udevd is already running
It seems a little strange, same error on both computers.
View 2 Replies
View Related
Jun 6, 2009
I'm on a LG E500-VAP36P, with 3gb RAM, 250 Gb SATA HDD (Kubuntu Hardy kernel 2.6.27-9-generic), and my keyboard and my usb mouse don't work at the login screen. My touchpad works and my keyboard works in command-line session. This is my xorg.conf. I also attach a relevant part of my syslog.
Quote:
Section "InputDevice"
Identifier"Generic Keyboard"
Driver"kbd"
[code]....
View 8 Replies
View Related
Jun 23, 2010
When I'm using Nautilus, I've found (for years) that I've had to hit Ctrl+C, Ctrl+V or Del multiple times until the commands would register. I noticed this occurs when the mouse is moving. I've looked under System > Preferences but can't find anything. Is there a key in gconf or something that I can disable?
View 2 Replies
View Related
Jul 9, 2011
I know that in previous versions of OpenSuSE one could be in front of the screen/KBD/mouse get things started, and log into another session and get things started there and run some apps, and so on. Now with OpenSuSE 11.x I see no means in which to do so. Is there another way? Point being is that I want to run one application as one user session and another application in yet another user session. Either one I can get to by switching user accounts at one screen/kbd/mouse. Or through VNC. No need to run something like xen or VMWare and incur additional overhead. (It is next on my list to try though.
View 2 Replies
View Related
May 1, 2010
I downloaded and burnt the Kubuntu 10.04 release to a CD. I tried to install it. First time, couldn't find the disks and eventually it froze. Ok, second try, when it's contacting the "time server" (or whatever) another freeze, but this time I notice everything is running fine and then get a nice little image with the current time (increasing seconds and all). Third attemp, clicked the "update this installer" and it went fine. "Yay!" I thought. Well, a few minutes in my beautiful 10.04 system and again, another freeze. Hit the power button and to my surprise a "Shutdown" dialog shows up with a countdown. After 30 seconds it logs out and mouse is working again. I log back in and come here to write this long post, and as I was writing the title "Random mouse/ke..." guess what? Yeah, it froze again. And the little bar that goes after the writing continued happily blinking. Hit the power button but this time mouse and keyboard were still frozen in the login screen.
Short version: mouse and keyboard randomly freeze while the rest of the system apparently work fine.
View 9 Replies
View Related
Jan 15, 2011
I let the update manager run overnight on my netbook because it was taking a while. When I woke up, my netbook was off. It may have shut off during the updates. Now, when I turn it on, it gets to the login screen but the keyboard and mouse don't work. Is there anything I can do without a Live CD? Unfortunately I don't have a flash drive or anything with me.
View 1 Replies
View Related
Dec 6, 2010
using Kubuntu 10.04. When my computer was being updated sudden power failure forced my system to reboot and in the log in screen I can find that my keyboard and mouse is not working at all. I cannot enter into my system. I tried to enter ctrl+F1 but failed.
View 1 Replies
View Related
Oct 11, 2010
After booting up my pc, sometimes it loads, and then my mouse freezes and i am unable to do anything at all. keyboard doesnt work either. Causing me to do a restart. when starting my pc, i get the ubuntu splash screen and then it jumps to a black screen with: "desktop login" after i out in my log in it asks for the password, i put that in and get "Weclome to Ubuntu etc" (forgot all the words, but its some statement welcoming me to ubuntu. The i get "tim@tim-desktop: $" but this is all on a black screen. Only way to get past this is to reboot my pc. and then it loads properly.
View 9 Replies
View Related
Jun 24, 2011
I recently tried to upgrade my Dell Latitude C610 from 10.10 to 11.04, but it got kernel panic right in the middle. Now it at least boots, but the mouse doesn't work--only the keyboard does. How do I fix this enough to use the mouse, or how do I operate Gnome with a keyboard?
View 2 Replies
View Related
Oct 11, 2010
I (finally!) have Mythtv working under 10.04. I use the Haupaugge DVB-T card with its remote. Whilst setting up the kit this worked OK. When I unplugged the keyboard and mouse the system prior to installing it next to the TV appeared to have stopped responding to the remote. In fact it seems to be responding to a number of the remote keys but not the OK and Go keys which isn't enough to run Mythtv.
I don't think leaving a keyboard & mouse plugged in is going to be domestically acceptable.
Does anyone have any ideas as to how to restore lirc functionality?
View 1 Replies
View Related
Apr 30, 2010
Just before Lucid was released, I installed karmic on a vanilla VM in 64-bit mode, and all was good. Did a desktop setup and afterwards installed Eclipse, and I was happy: A new system for coding on-the-go! Now, after upgrading to Lucid with do-release-upgrade -d, I can no longer enter my password on X login. The keyboard just doesn't work for some reason. When I enable the onscreen keyboard, and click my password, I can login. The strange thing is that my keyboard works like a charm after I've logged into my X session?
View 7 Replies
View Related
Feb 24, 2010
I'm trying to fix this problem: [URL] I have a problem with fglrx driver since Catalyst 9.9. After installation and reboot I get only black screen when X tries to start and keyboard doesn't work however when I press power button then the system shuts down properly after a while. I have noticed this for the first time on Hardy after installing Catalyst 9.9 and since then I have the same problem on Karmic and Catalyst 9.10/9.11 as well. I don't understand the bold text, What is this X he's talking about?
View 7 Replies
View Related
Dec 22, 2009
Picked up a Linkskey KVM (LKU-UA02) from my brother for free, thought I'd put it to use. Works fine but after switching between each machine once, the keyboard/mouse does not work. Tried unplugging the device(s) and the KVM itself from each machine but no luck.Not a huge issue, but it would be nice to use the KVM (right now I have to use VNC to get a similar effect).
View 1 Replies
View Related
Aug 19, 2009
I am trying to install fedora 10, 64 bit on computer with the following specification but the installation stops during installation (mouse , keyboard, screen freezes).
Motherboard Gigabyte GA-MA790GP-ud4h rev.1.0
processor AMD phenom ii 940
I have updated the bios to the latest version.
View 1 Replies
View Related
Sep 21, 2009
recently i tried to install for the first time and everything booted up fine but when i got to the post install configuration my mouse and keyboard don't work! after that one time whenever i try to load linux it just sits at the boot screen where the colored bar goes left to right and has fedora text in the bottom right corner. i don't know if this matters or not but i'm dual booting with windows XP also i tried using a live cd of fedora 11 it always boots up to the login however just like above i can't use my mouse or keyboard for that one either.
View 8 Replies
View Related
Jan 5, 2011
afeter installing ubuntu studio 10.10 a black login screen after login it asking me to type a command i've typed '' startx '' but it does't work
View 2 Replies
View Related
Feb 15, 2010
My computer was working this morning and both hard drives were working fine, then all of a sudden for about two hours I was stuck with this "problem", then after fumbling and moving and stablizing things, then Windows works? See below for details. I've finally reinstalled both hard drives, but the one with the Linux partition doesn't work: it says nothing is discovered on the disk. I can't login at the LUKS login after grub starts, therefore I can't get into Linux, but Windows works?! I used to be able to go directly into Grub when the computer starts, I forgot how to do that but it doesn't matter. If you need details I'd be glad to provide them. I just wondered why Linux doesn't work, but Windows does. I have Linux & Windows on two different separate hard drives
View 5 Replies
View Related
Oct 10, 2009
I have a 5 button mouse and the 4th and 5th buttons are useful for skipping back or forwards while surfing with Firefox. It would be nice if I could skip back in Nautilus too, but it doesn't work. (Alt+LeftArrow & Alt+RightArrow as keybord equivalent) Is there a possibility to use this buttons in Nautilus too?
View 6 Replies
View Related
Jan 30, 2010
I have installed fedora ver 10 on my PC. The issue is that my mouse does not work once i login, it hardly works for 5-10 mins and then does not respond, however system does not get hung. I am using USB optical mouse. Please help me in fixing the issue.
View 4 Replies
View Related
May 2, 2011
I have tried fedora 14th and also latest ubuntu but my lenovo notebook keyboard did not detected by OS. i think it is due to some kernel missing. keyboard work if acpi=off. My laptop is "Lenovo s10-3c". 1GB RAM, 160 GB Disk.
View 3 Replies
View Related
Oct 21, 2009
Why my mouse doesn't work in console?
View 2 Replies
View Related
Dec 2, 2009
If I remain 'connected' (with the KVM) to the linux machine the gnome screen saver cuts in and the system remains 'as is' until 'woken up' with the mouse or keyboard. However, if I switch to another machine using the KVM, within a short time (maybe even minute or two) the linux machine goes dead. Now it has not crashed, as I can log in from a remote machine and do anything I need from a terminal, but the machine seems not to respond. I can't even use ctrl-alt-fn to switch to a console screen.
I initially tried entering telinit 3 from a remote machine but it made no apparent difference. However, if after telinit 3 I then killed the Xorg process and later issued a telinit 5 the X server restarted, but with a curious black 'notch' at the top of the screen. I am using an NVIDIA GeForce 7600 GS graphics card. I am now adding the backtrace from Xorg.0.log. It seems that when the KVM switches to another machine for more than a very short time the X server crashes.
[Code]....
View 2 Replies
View Related
Oct 30, 2010
I just installed Fedora 13 on a Medion E1210. The main problem i have is that the keyboard of the notebook doesn't work. If i use an external USB-keyboard it works fine.
View 2 Replies
View Related
