My screen is frequently freezing and even the keyboard or mouse doesn't work. I've been told to read the logs, But I don't know where thy are or what to look for?
View 3 RepliesAfter booting up my pc, sometimes it loads, and then my mouse freezes and i am unable to do anything at all. keyboard doesnt work either. Causing me to do a restart. when starting my pc, i get the ubuntu splash screen and then it jumps to a black screen with: "desktop login" after i out in my log in it asks for the password, i put that in and get "Weclome to Ubuntu etc" (forgot all the words, but its some statement welcoming me to ubuntu. The i get "tim@tim-desktop: $" but this is all on a black screen. Only way to get past this is to reboot my pc. and then it loads properly.
View 9 Replies View RelatedWhen I start ubuntu I can't use my mouse and keyboard. It works in a second when the log in screen appears but then it freeze. It works in bios, grub and safe mode. I use mx518 and ace kl 400.
View 9 Replies View RelatedGot myself in a bit of a squeeze here. I was messing around with the Xorg install on my Fedora 12 system. I ended up reinstalling it. Now my mouse and keyboard work fine in single user mode / terminal. But if I try and boot to X they dont work at the login screen. HAL and udev are booting. Ive done a udevadm monitor test in single user mode and its seeing the devices connect and disconnect. Ive also tried both USB and PS2 devices. Same issue. Ive tried playing with xorg.conf and generating it with Xorg -configure :1 I dont know to use to fix it. After banging my head against the wall for 20+ hours I decided it was time to ask for help. m just Lynxing around the web at the moment =X
View 2 Replies View RelatedI downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
View 11 Replies View RelatedSo it's a beautiful day and I'll be happily using my computer when I realise that the screen is no longer showing that I'm typing or moving my mouse (or finger across a touch-pad). I can leave my computer in this frozen/crashed state for hours. My only recourse is to drain the battery or hold down the power button until the computer shuts down. The computer is a Dell Inspiron 6400 laptop/notebook. As my memory serves, it has an ATI graphics thingy. Radeon 1400, maybe. But I've had the computer for years and this behaviour has emerged only the past couple of months, with seemingly increasing frequency.
The OS is
# uname -a
Linux polaris 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64 GNU/Linux
(aka Squeeze?)
Sometimes this happens within minutes of turning the computer on and logging into Gnome. Sometimes this happens only hours after I've started using the computer (mainly just surfing the web). Sometimes it is preceded by a loud boop sound and the following if I have console open, sometimes not. So maybe that's unrelated. But that happened just now so I thought I'd throw it in.
One weird thing: Usually this happens within an hour of starting to use the computer, but one occasion I noticed I had not had the problem for several hours. On that occasion, the only thing I noticed I was doing that was also unusual: I had turned on and forgotten about a kvm virtual machine. After I shut down the vm, I had about only a minute before the freeze. I'm surprised now that it hasn't frozen since I started typing thing. Maybe I should always keep this forum open in a browser window.
I am trying to install fedora 10, 64 bit on computer with the following specification but the installation stops during installation (mouse , keyboard, screen freezes).
Motherboard Gigabyte GA-MA790GP-ud4h rev.1.0
processor AMD phenom ii 940
I have updated the bios to the latest version.
recently i tried to install for the first time and everything booted up fine but when i got to the post install configuration my mouse and keyboard don't work! after that one time whenever i try to load linux it just sits at the boot screen where the colored bar goes left to right and has fedora text in the bottom right corner. i don't know if this matters or not but i'm dual booting with windows XP also i tried using a live cd of fedora 11 it always boots up to the login however just like above i can't use my mouse or keyboard for that one either.
View 8 Replies View RelatedWhen I'm using Nautilus, I've found (for years) that I've had to hit Ctrl+C, Ctrl+V or Del multiple times until the commands would register. I noticed this occurs when the mouse is moving. I've looked under System > Preferences but can't find anything. Is there a key in gconf or something that I can disable?
View 2 Replies View RelatedI recently tried to upgrade my Dell Latitude C610 from 10.10 to 11.04, but it got kernel panic right in the middle. Now it at least boots, but the mouse doesn't work--only the keyboard does. How do I fix this enough to use the mouse, or how do I operate Gnome with a keyboard?
View 2 Replies View RelatedI have a Logitech Wave keyboard and mouse for my computer. I am not sure which version of Ubuntu I am running on but I think it is 6.10. When I boot up my computer I can go into the BIOS and earlier today it would even let me press escape to seee which operating systems I could boot. Now it no longer lets me see the operating system I have (which is why I cant say which version of Ubuntu I have). It takes me to the log in page and asks for the username and password but I cant type and I cant move the mouse. Earlier I could also use Alt+F1-F12, but this is no longer working either so it just sits at the login page and nothing works at all. The computer that is having this problem is very old it is a Proteva and when I opened up the actual computer the processor says:
At startup the computer says that the processor is a: AMD K-6
I know that the BIO's are to old for Ubuntu to run properly because at startup it also says that: "ACPI :
BIOS age (1998 ) fails cutoff (2000), acpi=force is required to enable ACPI" it also says that: "ACPI : unable to load the System Description Tables."
I have'nt used this computer for about a year or two, but the last time I used it it worked perfectly fine. I have been seeing questions on the forums similar to mine, but their problems are on other versions of Ubuntu and their mouse's are said to work fine. I cant try any of the solutions for the problems I have read about because I cant open the prompt that you get when you are at the log in screen and press F2. I have no idea what to do.
I (finally!) have Mythtv working under 10.04. I use the Haupaugge DVB-T card with its remote. Whilst setting up the kit this worked OK. When I unplugged the keyboard and mouse the system prior to installing it next to the TV appeared to have stopped responding to the remote. In fact it seems to be responding to a number of the remote keys but not the OK and Go keys which isn't enough to run Mythtv.
I don't think leaving a keyboard & mouse plugged in is going to be domestically acceptable.
Does anyone have any ideas as to how to restore lirc functionality?
I'm trying to fix this problem: [URL] I have a problem with fglrx driver since Catalyst 9.9. After installation and reboot I get only black screen when X tries to start and keyboard doesn't work however when I press power button then the system shuts down properly after a while. I have noticed this for the first time on Hardy after installing Catalyst 9.9 and since then I have the same problem on Karmic and Catalyst 9.10/9.11 as well. I don't understand the bold text, What is this X he's talking about?
View 7 Replies View RelatedI have a ubuntu loaded in KDE and this is in dual boot with Windows vista. I was "upgrading" my Linux (through update manager) when my computer just shut down. And when i restarted the computer to login to the Linux all I got was blank screen. I logged into recovery mode and selected the option to fix the packages. I rebooted my system and then again logged into the Linux. This time I could get the login screen but my mouse as well as Keyboard was not recognized. Essentially i cannot type or scroll and cannot login into Linux.
View 2 Replies View RelatedI just upgraded from 9.10 to 10.04 using the distro upgrade feature. Everything was upgraded without errors.
However, my mouse/keyboard now freezes after 10+ minutes of use. Both are unresponsive, and the keyboard lights does not change with the use of caps-lock, etc.
The system didn't crash though. I had a download running which was completed despite the mouse/keyboard hang.
The computer is barely usable now, I really wished I didn't upgrade...
I've had these problems ever since upgrading to 10.10Boot up goes nowhere unless I touch the trackpad or keyboard. My clock says it's 10:00am but it's three in the afternoon, so I'm always having to resync with NTP. Music and video stutters with playback unless I touch the trackpad.I'm on a Toshiba NB205 netbook.These are pretty big problems. And I'm sure I'm not the only one using 10.10. Is there no fix out for this yet?
View 2 Replies View RelatedI'm running suse 11.4 64bit and flash 11.0.1.60 My problem is that when I'm running flash if I give some keyboard input then my mouse (and only my mouse from what I can tell) will freeze for a second or so. This is most annoying when I'm goofing off playing a flash game that requires both keyboard and mouse inputs, since if I use the keyboard for anything I can't use the mouse for a second or so.I've tried searching the forums but I can't seem to find anything on this topic.
View 3 Replies View RelatedI am COMPLETELY new to Linux.I started a computer class recently and I started teaching myself PERL.My teacher had mentioned to me that it's far better for some reasons (he did not elaborate) to write code in a Unix system. So I got Ubuntu 10.10.I installed it along side my windows 7.After I setup my windows (had to reformat the disk) I decided to boot up into Ubuntu to set that up. I installed the necessary drivers that it required, and the updates. I was asked to restart the system so I did so.
It did not even shut down or restart my system.I waited patiently 15 minutes...30 minutes 1 hour... until I finally decided to hit the reset button on my PC. Then when I'd boot back in to Ubuntu afterwards, it would stay at the log in screen and my mouse wouldn't budge and nor is my keyboard recognized by Ubuntu.Im really frustrated and I've been searching for answers for the whooole day and I just can't seem to find something well explained. Im completely new to Ubuntu so I don't know where to enter any code in a cmd line or such.
1)Reformatted my harddrive to install windows 7 on it
2)Set up windows 7 and then booted into Ubuntu.
3) Set up Ubuntu and installed necessary drivers and updates
4) Reset the computer and waited for an hour for the reset to happen but nothing happened.
5) Manually reset my pc and booted into ubuntu
6) Stuck at log in screen with mouse and keyboard not functioning (unable to use ubuntu).
As my ubuntu 9.10 boots the mouse and the key board fail and screen is inactive. Previously working OK.
View 5 Replies View Relatedusing Kubuntu 10.04. When my computer was being updated sudden power failure forced my system to reboot and in the log in screen I can find that my keyboard and mouse is not working at all. I cannot enter into my system. I tried to enter ctrl+F1 but failed.
View 1 Replies View RelatedUbuntu 10.04 64 bit, GNOME desktop. Previous install (same OS) gave an error when switching users. Did a fresh install, and now the keyboard and mouse freeze. This happens almost every session. I have to force shutdown. Sometimes it happens in 5 minutes, other times it happens in 4 hours. I don't want to sound like a jerk, but the Ubuntu problems are starting to get to me. I really want to use this. I like it, but I'm getting frustrated. 9.10 had wireless problems, and now I'm getting this freezing thing. Both the keyboard and mouse are USB connections. Everything else works when the freeze occurs, i.e., video's still play, web browser is still displaying gifs, etc. Only the mouse and keyboard freeze. All other operations seem normal.
View 3 Replies View RelatedI have been battling this issues for about a year now. Kind of got tired of dealing with it, but inevitably I go away for vacation or something and I lose power at the fort then the system will not come back up on its own.
Every time (100%) I power my system on with the single USB cable connected to it, my system hangs. It did it on 8.x, 9.x and all versions of 10.x. I have asked the questions before, but never get anywhere with it. Finally I have found this Forum and figured out how to ask questions Weird, I know
Anyway.
The system goes through the BIOS check and gets to the GRUB loader. If I do nothing, it hangs with a black screen just after it says that it is loading the kernel.
If I change the kernel commands to include the noacpi=apic or most other common fixes for what I have been told, USB, I get to the same place seemingly.
In reading through the forums and a little testing, I find that if I remove the splash and the quiet commands (obviously snicker), I am able to see where it is really stopping, but does not make sense to me.
The last informational text that appears to be processed is one of
Registered Protocol Family 1
There is nothing in the SYSLOG, MESSAGES or DMESG at all for this boot. I would assume that the system is not to a point where we can log this data
This is an AMD Phenom II x4 running 10.04 64bit Ubuntu. The USB connected device is an Avocent KVM 4 port with Audio and USB.
I am using Debian with a gnome desktop.
Code: Select alluname -a
returns
Code: Select allLinux app-server 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64 GNU/Linux
My desktop sometimes freezes and does not respond to keyboard or mouse. I initially thought the CPU was overheating but it froze tonight when my CPU temperature was 32C and it has been up to 50C without freezing. I am beginning to think it is a software issue rather than a hardware issue but do not know. I looked at the pm-powersave.log and user.log but did not see anything suspicious.
I have installed Ubuntu 10.10 on other machines before and have not experienced this problem. Occasionally, the system will lock up. They keyboard and mouse stop responding (my keyboard status lights no longer respond, but my optical mouse light is still on). I can ssh to the machine, and it seems to work as normal. I kill processes that are open on my desktop through ssh, (i.e., Firefox), and I notice when I switch back, I still have the same frozen image on my screen. I have looked at the following files to determine any issues with the GPU:
[Code]...
I've got a Compaq MX 11800 keyboard that has a ball (used as a mouse). The ball works fine in Ubuntu and Windows, but does not work in Debian or Fedora.
I don't know where to start troubleshooting this issue. Any help is appreciated.
Here's a picture of the thing: [url]
I'm trying to install slackware 32 bit 13.1.After loading kernel it asks for keyboard configuration, but keyboard (usb wireless) doesn't work.
Keyboard works on the old 13.0 installation, on bios and also in the boot options of 13.1 installation cd.
I've tried removing legacy usb support and changing usb2.0 speed from high to full. Nothing changed.
Anybody with this strange problem? (kernel of setup seems also to detect it correctly as a trust keyboard).
I want to install Linux on my laptop. I started with Arch but 4 hours later, I'll take anything so now I'm trying Ubuntu.It appears that the keyboard function button that corresponds to my wireless does not work, and perhaps is windows dependent?Every time I try to interact with wlan0, I get the error "Operation not possible due to RF-kill". And as I've looked around online, it has been suggested in other forums that the only way to resolve this is to reinstall windows and dual boot, so the FN key will work.
I think this is ridiculous. There must be a way to persuade the RF-kill to be turned off again, shouldn't there?I don't have a recover disk for this laptop and I don't want to go through the trouble of requested one from acer. I reformatted the whole disk while attempted to install arch.
i think the motherboard is cooked but not sure...be4 i call them up and say wtf i want to make sure i have not missed anything (i dont think i have* ok the MO is a MSI g31tm-p21 and the processor is a intel celeron e3300. when i powered it on lights on front panel came on *case has temp readings and fan controls* all of that powered on...the two case fans power on and the processor powers on cd drive powers on and HDD powers on as well so the power box is working there is not a problem with that. i recheck all cabling and its all right i had jumped the cmos a few times now. and with the cmos jumped the M/O would not even TRY to turn on so that was good. it would only turn on when jumped the right away the *keep data* setting took the batt out and waited to let the cmos clear that way. still nothing and i am still getting no post screen. keyboard dos not light up nor dos the mouse
View 6 Replies View Relatedso, I compiled the 2.6.35.7 kernel yesterday and used the config from 2.6.35.6 doing make oldconfig,etc
its the vanilla kernel with BFS, BFQ[*], Tuxonice, aufs2, & squashfs-lzma patches after compiling and rebooting I have noticed that the mouse freezes whenever the pc cpu is running high cpu % this didnt happen before with any other kernel and as I said, I used the 2.6.35.6 config Has anyone else had issues with 2.6.35.7 kernel? hardware is amd athlon64 3300+ 2.4ghz 1GB RAM, on 32bit Slackware -current I am going to compile the vanilla kernel now and see what happens.
I have a headless mythtv running 13, when there's no monitor connected X doesn't start. If I plug a monitor in it still doesn't do my any good as there's no kb/mouse either. I know the system has booted fine as I can connect to myth remotely. This a slackware or x problem? Want to run x11vnc here but without x I can't do that.
View 5 Replies View Related