Ubuntu :: Keyboard And Mouse Will Not Work Once Get To The Login Screen
Jan 22, 2010
I have a Logitech Wave keyboard and mouse for my computer. I am not sure which version of Ubuntu I am running on but I think it is 6.10. When I boot up my computer I can go into the BIOS and earlier today it would even let me press escape to seee which operating systems I could boot. Now it no longer lets me see the operating system I have (which is why I cant say which version of Ubuntu I have). It takes me to the log in page and asks for the username and password but I cant type and I cant move the mouse. Earlier I could also use Alt+F1-F12, but this is no longer working either so it just sits at the login page and nothing works at all. The computer that is having this problem is very old it is a Proteva and when I opened up the actual computer the processor says:
At startup the computer says that the processor is a: AMD K-6
I know that the BIO's are to old for Ubuntu to run properly because at startup it also says that: "ACPI :
BIOS age (1998 ) fails cutoff (2000), acpi=force is required to enable ACPI" it also says that: "ACPI : unable to load the System Description Tables."
I have'nt used this computer for about a year or two, but the last time I used it it worked perfectly fine. I have been seeing questions on the forums similar to mine, but their problems are on other versions of Ubuntu and their mouse's are said to work fine. I cant try any of the solutions for the problems I have read about because I cant open the prompt that you get when you are at the log in screen and press F2. I have no idea what to do.
Got myself in a bit of a squeeze here. I was messing around with the Xorg install on my Fedora 12 system. I ended up reinstalling it. Now my mouse and keyboard work fine in single user mode / terminal. But if I try and boot to X they dont work at the login screen. HAL and udev are booting. Ive done a udevadm monitor test in single user mode and its seeing the devices connect and disconnect. Ive also tried both USB and PS2 devices. Same issue. Ive tried playing with xorg.conf and generating it with Xorg -configure :1 I dont know to use to fix it. After banging my head against the wall for 20+ hours I decided it was time to ask for help. m just Lynxing around the web at the moment =X
I'm on a LG E500-VAP36P, with 3gb RAM, 250 Gb SATA HDD (Kubuntu Hardy kernel 2.6.27-9-generic), and my keyboard and my usb mouse don't work at the login screen. My touchpad works and my keyboard works in command-line session. This is my xorg.conf. I also attach a relevant part of my syslog.
I have a ubuntu loaded in KDE and this is in dual boot with Windows vista. I was "upgrading" my Linux (through update manager) when my computer just shut down. And when i restarted the computer to login to the Linux all I got was blank screen. I logged into recovery mode and selected the option to fix the packages. I rebooted my system and then again logged into the Linux. This time I could get the login screen but my mouse as well as Keyboard was not recognized. Essentially i cannot type or scroll and cannot login into Linux.
As the title says i have this error on both my main computer and my laptop. For my main computer see this post, that is when it happened. viewtopic.php?f=30&t=65743
I run the updates on my laptop a while ago and decided to restart it to check if everything went okay. It seems not.
The only way i can get on the desktop, is to choose the recovery mode, su to user and startx.
This is a common error during booting on both computers. Starting the hotplug events dispatcher: udevderror binding control socket, seems udevd is already running
It seems a little strange, same error on both computers.
I downloaded and burnt the Kubuntu 10.04 release to a CD. I tried to install it. First time, couldn't find the disks and eventually it froze. Ok, second try, when it's contacting the "time server" (or whatever) another freeze, but this time I notice everything is running fine and then get a nice little image with the current time (increasing seconds and all). Third attemp, clicked the "update this installer" and it went fine. "Yay!" I thought. Well, a few minutes in my beautiful 10.04 system and again, another freeze. Hit the power button and to my surprise a "Shutdown" dialog shows up with a countdown. After 30 seconds it logs out and mouse is working again. I log back in and come here to write this long post, and as I was writing the title "Random mouse/ke..." guess what? Yeah, it froze again. And the little bar that goes after the writing continued happily blinking. Hit the power button but this time mouse and keyboard were still frozen in the login screen.
Short version: mouse and keyboard randomly freeze while the rest of the system apparently work fine.
I let the update manager run overnight on my netbook because it was taking a while. When I woke up, my netbook was off. It may have shut off during the updates. Now, when I turn it on, it gets to the login screen but the keyboard and mouse don't work. Is there anything I can do without a Live CD? Unfortunately I don't have a flash drive or anything with me.
I know that in previous versions of OpenSuSE one could be in front of the screen/KBD/mouse get things started, and log into another session and get things started there and run some apps, and so on. Now with OpenSuSE 11.x I see no means in which to do so. Is there another way? Point being is that I want to run one application as one user session and another application in yet another user session. Either one I can get to by switching user accounts at one screen/kbd/mouse. Or through VNC. No need to run something like xen or VMWare and incur additional overhead. (It is next on my list to try though.
using Kubuntu 10.04. When my computer was being updated sudden power failure forced my system to reboot and in the log in screen I can find that my keyboard and mouse is not working at all. I cannot enter into my system. I tried to enter ctrl+F1 but failed.
When I start ubuntu I can't use my mouse and keyboard. It works in a second when the log in screen appears but then it freeze. It works in bios, grub and safe mode. I use mx518 and ace kl 400.
My screen is frequently freezing and even the keyboard or mouse doesn't work. I've been told to read the logs, But I don't know where thy are or what to look for?
I downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
It's two days now I'm in deep troubles after my last "yum update". The system boots as usual, the graphical login pops up the normal way but no input is handled by either the internal keyboard (the system is a laptop), the mouse pad, the external USB mouse and keyboard.
The hardware itself seems to be working as I can pop up the BIOS menus and even edit the GRUB booting line. But, after GRUB there's no possible input. I've tried to boot the system with the Fedora 11 DVD, rescue menu and then chroot. This in order to run a "yum update" in the hope that the problem was in some broken update. No chance: there's no update.
My questions are:
1. Is there a way to boot Fedora withou any graphical interface from GRUB (or anything else to skip the KDE)?
2. Is there a way to have the (cabled) network activated at boot *before* the graphical login?
3. What the he** is happening to my otherwise pefectly working laptop?
I have an AMD 64 Dual Core 4200 w/2 Gigs RAM. On Jaunty, after adding some software through Synaptic (don't remember which software), I lost the use of both my mouse and keyboard at the Login screen. I can't even click on what I want to use (Gnome, KDE, etc.) I had to install the i386 version of Jaunty in Windows just to get into my Linux files. I tried going into the Initialize commands file (advice from Ubuntu forums) and add them, but still no keyboard or mouse.
I have an Acer 5102 WLMi laptop from 2005 with Ubuntu 9.10 installed. It has worked fine for years but now when I boot up my mouse and keyboard don't respond leaving me stuck at the login screen. I have tried using a USB mouse without sucess. My USB-powered cooling fan still works in all three USB ports fine. I have tried booting into the LiveCD and got the same results except for the CD auto-logging in. Eht0 still auto-connects to the network fine in the LiveCD. I can't find any wrong except for the keyboard and mouse not responding. My next step is to burn a LiveCD with start-up scripts to enable ssh. Also the touch-pad doesn't respond either
Upon booting mouse and keyboard work for a short duration, sometimes it works on optimum level though. If I speedily type in my password it will go through and then freeze before logging. This appears to be a known problem in Lucid Lynx I was wondering if there was a fix for a certain update [URL]
I recently installed suse 11.2 on my system and during the install the keyboard (Microsoft internet keyboard PS/2) and mouse (Microsoft optical mouse USB with scroll wheel) worked perfectly, but once I reached the login screen they both became unusable.
I also tried rebooting into failsafe mode but once reaching the login screen the same happened again, the only key that seems to work is the 'F Lock' key and the optical light appears on the mouse.
The keyboard and mouse won't work while live booting Ubuntu from CD on a Acer Verition M264. I've tried PS/2 and USB mice. This problem starts from when Ubuntu loads, keyboard and mouse is fine until that point. There's also a complaint message once it's loaded up: The panel encountered a problem while loading "OAFIID:GNOME_FastUserSwitchApplet".
On a Dell Inspiron and a Acer Aspire X3200, Ubuntu 9.10 works just fine.
I have a problem with mouse and keyboard. Both freeze within 30sec to half an hour after logging into squeeze 64bit (using gnome). My hardware is Asus P7P55D EVO (tested with linux according to ASUS) with Intel i5 760 CPU. I use IBM keyboard and Trust PS2 mouse. I also have MSI HD4350 graphics card, that was at least listed on Ubuntu to be supported, worked fine also with Lenny.
When using same combination with Lenny (64-bit) I never found any problem with either keyboard nor mouse, even running long nights. However there was need to upgrade to Squeeze since it has newer kernel supporting the sensors on board my MB. I used same mouse and keyboard also on Ubuntu 9.10 and had never problems. However when I upgraded to new MB I started with Ubuntu 10.04 64 bit version and experienced same keyboard and mouse freeze as I have now in squeeze. Only way out from this status is hard reset using PC reset button.
I connected with putty to my linux box and found following (while the linux box was on frozen state) from dmesg on keyboard: :/var/log$ dmesg | grep -i keyboard [ 1.064628] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
I've just installed CentOS-5.4 on an AMD64 box, dual boot with Windows 7 64, if that matters. At first I could not get the GUI to display at all, but fixed that using system-config-display. During installation, the keyboard (HP bluetooth set with mouse) worked fine in the GUI, but mouse did not. Now when it loads the GUI interface after booting, neither the keyboard or the mouse will work at all, therefore I can't navigate anywhere. I have done the yum update already as well, from init 3, but they still are not working. what I should do next, where to check?
When I'm using Nautilus, I've found (for years) that I've had to hit Ctrl+C, Ctrl+V or Del multiple times until the commands would register. I noticed this occurs when the mouse is moving. I've looked under System > Preferences but can't find anything. Is there a key in gconf or something that I can disable?
I tried to upgrade from 10.4 to 10.10.Every thing went normal until the grub screen wanted me to select which kernel.The wireless usb keyboard and mouse would not work.I found an old keyboard and mouse, they worked.the login screen popped up, I selected the user name and typed the password.After a moment the login screen pops back up.I can log into the recovery console.
I have 2 computers running Ubuntu 10.04, One of them have a screen, keyboard and mouse connected (all wired)I want to control the other computer in some way, like a virtual PC in a window, via my network or a cable.
Picked up a Linkskey KVM (LKU-UA02) from my brother for free, thought I'd put it to use. Works fine but after switching between each machine once, the keyboard/mouse does not work. Tried unplugging the device(s) and the KVM itself from each machine but no luck.Not a huge issue, but it would be nice to use the KVM (right now I have to use VNC to get a similar effect).
After booting up my pc, sometimes it loads, and then my mouse freezes and i am unable to do anything at all. keyboard doesnt work either. Causing me to do a restart. when starting my pc, i get the ubuntu splash screen and then it jumps to a black screen with: "desktop login" after i out in my log in it asks for the password, i put that in and get "Weclome to Ubuntu etc" (forgot all the words, but its some statement welcoming me to ubuntu. The i get "tim@tim-desktop: $" but this is all on a black screen. Only way to get past this is to reboot my pc. and then it loads properly.
I recently tried to upgrade my Dell Latitude C610 from 10.10 to 11.04, but it got kernel panic right in the middle. Now it at least boots, but the mouse doesn't work--only the keyboard does. How do I fix this enough to use the mouse, or how do I operate Gnome with a keyboard?
First I tried VNC. Easy install through Ubuntu GUI, but I could only see a still picture of the Ubuntu-desktop that wouldn't update. I could see on the Ubuntu monitor that the cursor was moving and the keyboard did work, but on my Windows computer, the screen didn't refresh. Then I read a bit on the forums and people seemed content with nomachine NX or freenx. After a bit of hazzle I finally managed to get a connection between my Windows and Ubuntu-machine. But the same thing happened here. I get to see a still picture of the Ubuntu desktop, mouse and keyboard working, but the screen doesn't refresh..!
I have Laptop sony VPCEA22EN. I have installed ubuntu 10.04. it was working fine. Then i installed kubuntu-desktop. it was working fine. i tried to some of bugs using kubuntu update manager. i restarted the laptop.
after that im not able to logon on kubuntu. on kubuntu logon screen i'm unable to enter username n password. Keyboard and mouse is not detected but, usb mouse works.
i tried ctrl+alt+esc, this combination doesnt work while booting. i can't use this combination on log-on screen because keyboard is not detected.
I installed Ubuntu a couple of months ago using the Wubi installer.Today, I went to restart my PC, but soon after hitting 'Restart' the computer became unresponsive. I couldn't get any keyboard/mouse input to register on screen, so I did a force shut down by holding down the power button. When I turned the computer back on, I selected Ubuntu from the boot menu. The computer printed some messages that passed by relatively quickly so I'm not sure exactly what they said, but it was something along the lines of "NTFS3: wubibuilder failed to load", and then it went straight back to the boot menu. Tried again and again with no success, so I loaded my Windows 7 install to investigate from there. I found a link to Explore2fs on these forums, so I loaded it up, but it apparently can't locate my Ubuntu partition, or at least I don't see my files. I ran the Wubi installer again to see what it would say, and it tells me that a previous installation was detected, and gives me the option to uninstall. Does anyone have an idea of what went wrong,