Ubuntu :: Remote Doesn't Work Without Keyboard / Mouse Plugged In - Restore Its Functionality?
Oct 11, 2010
I (finally!) have Mythtv working under 10.04. I use the Haupaugge DVB-T card with its remote. Whilst setting up the kit this worked OK. When I unplugged the keyboard and mouse the system prior to installing it next to the TV appeared to have stopped responding to the remote. In fact it seems to be responding to a number of the remote keys but not the OK and Go keys which isn't enough to run Mythtv.
I don't think leaving a keyboard & mouse plugged in is going to be domestically acceptable.
Does anyone have any ideas as to how to restore lirc functionality?
View 1 Replies
ADVERTISEMENT
Jun 23, 2010
When I'm using Nautilus, I've found (for years) that I've had to hit Ctrl+C, Ctrl+V or Del multiple times until the commands would register. I noticed this occurs when the mouse is moving. I've looked under System > Preferences but can't find anything. Is there a key in gconf or something that I can disable?
View 2 Replies
View Related
Dec 16, 2010
When I start ubuntu I can't use my mouse and keyboard. It works in a second when the log in screen appears but then it freeze. It works in bios, grub and safe mode. I use mx518 and ace kl 400.
View 9 Replies
View Related
Oct 11, 2010
After booting up my pc, sometimes it loads, and then my mouse freezes and i am unable to do anything at all. keyboard doesnt work either. Causing me to do a restart. when starting my pc, i get the ubuntu splash screen and then it jumps to a black screen with: "desktop login" after i out in my log in it asks for the password, i put that in and get "Weclome to Ubuntu etc" (forgot all the words, but its some statement welcoming me to ubuntu. The i get "tim@tim-desktop: $" but this is all on a black screen. Only way to get past this is to reboot my pc. and then it loads properly.
View 9 Replies
View Related
Jun 24, 2011
I recently tried to upgrade my Dell Latitude C610 from 10.10 to 11.04, but it got kernel panic right in the middle. Now it at least boots, but the mouse doesn't work--only the keyboard does. How do I fix this enough to use the mouse, or how do I operate Gnome with a keyboard?
View 2 Replies
View Related
Apr 8, 2010
Got myself in a bit of a squeeze here. I was messing around with the Xorg install on my Fedora 12 system. I ended up reinstalling it. Now my mouse and keyboard work fine in single user mode / terminal. But if I try and boot to X they dont work at the login screen. HAL and udev are booting. Ive done a udevadm monitor test in single user mode and its seeing the devices connect and disconnect. Ive also tried both USB and PS2 devices. Same issue. Ive tried playing with xorg.conf and generating it with Xorg -configure :1 I dont know to use to fix it. After banging my head against the wall for 20+ hours I decided it was time to ask for help. m just Lynxing around the web at the moment =X
View 2 Replies
View Related
Apr 3, 2011
My screen is frequently freezing and even the keyboard or mouse doesn't work. I've been told to read the logs, But I don't know where thy are or what to look for?
View 3 Replies
View Related
Jun 11, 2009
I downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
View 11 Replies
View Related
Jan 1, 2011
how I restore dead mouse and keyboard input from the live cd. Basically what happened was I was updating the machine and decided to let them run in the background while my sister's 6 year old son played some tux computer games, when he was finished he switched the entire computer off at the power button and it was still updating in the background. Now there is no mouse or keyboard input, I cannot get into the recovery console, nor can I control a terminal from the login screen in order to successfully complete the update. This means basically the only option to fix it would be to re-install or fix the human user interface device drivers (keyboard and mouse) via the live cd, I am in need of some advice or instructions on how to go about fixing this issue.
View 5 Replies
View Related
Apr 7, 2011
So, I have an ubuntu box (no keyboard/mouse), connected to a 1920x1080 TV on my wall which is usually used as a media center. Some times I want to do some maintenance work through the GUI so the obvious thing to do is have some kind of remote administration software like VNC. That is generally very laggy and I don't need a full remote administration because I already have a big TV in front of me, I just need to use my laptop's mouse and keyboard to control the linux box.
View 2 Replies
View Related
Sep 25, 2010
In Ubuntu 9.10, I was successfully able to use my Pinnacle Dazzle DVC 100 (a cheap USB analog video capture device). I use it for backing up old video that is stored on tapes, and it isn't working with my current install of Ubuntu 10.04. When I plug the device in, it should be detected and the em28xx module should be loaded. This fails and /var/log/messages has the following:
Code:
Sep 25 16:13:18 kernel: [1196215.111898] usb 2-2: new high speed USB device using ehci_hcd and address 20
Sep 25 16:13:18 kernel: [1196215.266097] usb 2-2: configuration #1 chosen from 1 choice
[code]....
View 3 Replies
View Related
Mar 16, 2010
I've bought this remote control that sais it works in Vista, XP etc. without any driver. Basically it has a bunch of buttons that replace the mouse and a bunch of others that replace basic keyboard functions (arrows, enter, escape). It has a USB IR receiver so I thought I could simply use it as a lirc remote in Ubuntu.
However, it sais absolutely nothing on it except for "PCremote" so during lirc installation I have no idea what to choose. And, interestingly, I accidentally discovered that it works in Ubuntu, too, out of the box. Controlling the mouse and acting like a keyboard. Is there a way I can forfeit current functionality and just get it to work as a customizable lirc remote? Or even better, keep current functionality but change it only for certain apps (xbmc, vlc etc)?
View 6 Replies
View Related
Jan 19, 2010
For about the past month I have been having a very frustrating problem When I boot the system with the ethernet cable attached it acts as if the cable is unplugged even though the connection light is litWhen I boot the system with the ethernet cable disconnected and wait until it boots all the way to gnome and then plug in the cable everything works fine
View 1 Replies
View Related
Mar 23, 2010
i think the motherboard is cooked but not sure...be4 i call them up and say wtf i want to make sure i have not missed anything (i dont think i have* ok the MO is a MSI g31tm-p21 and the processor is a intel celeron e3300. when i powered it on lights on front panel came on *case has temp readings and fan controls* all of that powered on...the two case fans power on and the processor powers on cd drive powers on and HDD powers on as well so the power box is working there is not a problem with that. i recheck all cabling and its all right i had jumped the cmos a few times now. and with the cmos jumped the M/O would not even TRY to turn on so that was good. it would only turn on when jumped the right away the *keep data* setting took the batt out and waited to let the cmos clear that way. still nothing and i am still getting no post screen. keyboard dos not light up nor dos the mouse
View 6 Replies
View Related
Jul 18, 2010
I'm trying to install slackware 32 bit 13.1.After loading kernel it asks for keyboard configuration, but keyboard (usb wireless) doesn't work.
Keyboard works on the old 13.0 installation, on bios and also in the boot options of 13.1 installation cd.
I've tried removing legacy usb support and changing usb2.0 speed from high to full. Nothing changed.
Anybody with this strange problem? (kernel of setup seems also to detect it correctly as a trust keyboard).
View 9 Replies
View Related
Jun 7, 2010
The keyboard and mouse won't work while live booting Ubuntu from CD on a Acer Verition M264. I've tried PS/2 and USB mice. This problem starts from when Ubuntu loads, keyboard and mouse is fine until that point. There's also a complaint message once it's loaded up: The panel encountered a problem while loading "OAFIID:GNOME_FastUserSwitchApplet".
On a Dell Inspiron and a Acer Aspire X3200, Ubuntu 9.10 works just fine.
View 2 Replies
View Related
May 15, 2010
I have a headless mythtv running 13, when there's no monitor connected X doesn't start. If I plug a monitor in it still doesn't do my any good as there's no kb/mouse either. I know the system has booted fine as I can connect to myth remotely. This a slackware or x problem? Want to run x11vnc here but without x I can't do that.
View 5 Replies
View Related
Apr 1, 2010
I've just installed CentOS-5.4 on an AMD64 box, dual boot with Windows 7 64, if that matters. At first I could not get the GUI to display at all, but fixed that using system-config-display. During installation, the keyboard (HP bluetooth set with mouse) worked fine in the GUI, but mouse did not. Now when it loads the GUI interface after booting, neither the keyboard or the mouse will work at all, therefore I can't navigate anywhere. I have done the yum update already as well, from init 3, but they still are not working. what I should do next, where to check?
View 5 Replies
View Related
Feb 2, 2011
I`m new to Ubuntu and Linux as all. First of all i have a Dell Inspiron N5010 laptop. I have a very strange problem, after the initial installation of Ubuntu 10.10 there were no problems plugging in my headphones or 2.1 sound system and listening to music. After a couple of days when trying to plug in my 2.1 sound system I noticed that there is no sound coming out of them, but the laptop speakers were working fine. Tested the sound system with another laptop and they worked well. I have checked all the settings and everything seems fine. I`m puzzled. I have the system dual boot with Win 7 if that makes any difference.
View 3 Replies
View Related
Jan 14, 2010
I used a live CD burned onto a DVD-RW and it booted up and worked great. So I installed it using the entire hard drive, Ran Update manager, enabled the driver for the wifi card. Before I was using 10.5 with all recent updates done. A few things don't work. It fails whenever I try to connect my Bluetooth mouse and keyboard, CD drive doesn't mount anything, I thought it would bring up the restricted nvidia driver but it doesn't so the video is slow and sketchy.
View 7 Replies
View Related
Jan 22, 2010
I have a Logitech Wave keyboard and mouse for my computer. I am not sure which version of Ubuntu I am running on but I think it is 6.10. When I boot up my computer I can go into the BIOS and earlier today it would even let me press escape to seee which operating systems I could boot. Now it no longer lets me see the operating system I have (which is why I cant say which version of Ubuntu I have). It takes me to the log in page and asks for the username and password but I cant type and I cant move the mouse. Earlier I could also use Alt+F1-F12, but this is no longer working either so it just sits at the login page and nothing works at all. The computer that is having this problem is very old it is a Proteva and when I opened up the actual computer the processor says:
At startup the computer says that the processor is a: AMD K-6
I know that the BIO's are to old for Ubuntu to run properly because at startup it also says that: "ACPI :
BIOS age (1998 ) fails cutoff (2000), acpi=force is required to enable ACPI" it also says that: "ACPI : unable to load the System Description Tables."
I have'nt used this computer for about a year or two, but the last time I used it it worked perfectly fine. I have been seeing questions on the forums similar to mine, but their problems are on other versions of Ubuntu and their mouse's are said to work fine. I cant try any of the solutions for the problems I have read about because I cant open the prompt that you get when you are at the log in screen and press F2. I have no idea what to do.
View 2 Replies
View Related
Dec 25, 2010
I tried to upgrade from 10.4 to 10.10.Every thing went normal until the grub screen wanted me to select which kernel.The wireless usb keyboard and mouse would not work.I found an old keyboard and mouse, they worked.the login screen popped up, I selected the user name and typed the password.After a moment the login screen pops back up.I can log into the recovery console.
View 2 Replies
View Related
Mar 2, 2011
I have installed Fedora 13 on my system, that went smooth. After restart when I see the License, User creation screen, my normal MS usb Mouse and a MS Keyboard wont work. I have a IR remote which i use to control music >>> image attached. The mouse and kbd on this remote do work. What might be the reason?
View 1 Replies
View Related
May 16, 2011
Here's what I want to do: Copy the whole Ubuntu 10.04 partition/installation from my old laptop to the new one.
What I tried: Used Simple backup to back up my Ubuntu installation to a USB hard drive. It yields a 10.4 gig folder containing 7 files. Installed 10.04 on the new laptop, used Synaptic to install Simple Backup, plugged in USB drive, started Simple Backup Restore, tagged the backup directory in Simple Backup Restore, and get the error:
Error: no backups found in the target directory.
I also tried copying the backup to the local drive, same difference.
View 7 Replies
View Related
Dec 22, 2009
Picked up a Linkskey KVM (LKU-UA02) from my brother for free, thought I'd put it to use. Works fine but after switching between each machine once, the keyboard/mouse does not work. Tried unplugging the device(s) and the KVM itself from each machine but no luck.Not a huge issue, but it would be nice to use the KVM (right now I have to use VNC to get a similar effect).
View 1 Replies
View Related
May 10, 2011
I have a ubuntu loaded in KDE and this is in dual boot with Windows vista. I was "upgrading" my Linux (through update manager) when my computer just shut down. And when i restarted the computer to login to the Linux all I got was blank screen. I logged into recovery mode and selected the option to fix the packages. I rebooted my system and then again logged into the Linux. This time I could get the login screen but my mouse as well as Keyboard was not recognized. Essentially i cannot type or scroll and cannot login into Linux.
View 2 Replies
View Related
Jan 14, 2011
It's installed as a mobile broadband connection. Only works if my phone is plugged in during boot, otherwise plugging in my phone does nothing. For example, I booted my netbook earlier today but my phone wasn't plugged in. Tethering did not work, it just acts as if it isn't present. I rebooted (with my phone still attached) and now tethering magically works.
View 5 Replies
View Related
Feb 26, 2010
Well, just as the title of this post says, I am having keyboard and mouse problems. Here's the storyMy friend Cody wanted me to take a look at his computer for him (I'm sort of known as a Linux nerd in my school lol) because his keyboard and mouse do not at all work in init 4 mode. I've tried reconfiguring the keyboard and mouse by trying a different module. I've even tried reconfiguring X alltogether by running "X -configure", which didn't work
View 3 Replies
View Related
Jul 16, 2010
my keyboard lost it functionality as it was used to be, something went wrong and im not sure what but it seems something wrote those settings to my pc's ROM or something.Since i used the ubuntu and then the layout screwed up, I dont know what else to do as it seems it affected my windows too, i tried to recover to an older version of ubuntu that i had (as in i made a system backup using acronis) with all the things working right but it seems it wont help as the settings saved itself and I dont know where to change it back. im in such a panic as this thing never happen to me before ctrl is right ctrl, right ctrl funtion as the FN key, the whole FN+Fx are wrong
View 5 Replies
View Related
Sep 21, 2009
recently i tried to install for the first time and everything booted up fine but when i got to the post install configuration my mouse and keyboard don't work! after that one time whenever i try to load linux it just sits at the boot screen where the colored bar goes left to right and has fedora text in the bottom right corner. i don't know if this matters or not but i'm dual booting with windows XP also i tried using a live cd of fedora 11 it always boots up to the login however just like above i can't use my mouse or keyboard for that one either.
View 8 Replies
View Related
