Ubuntu :: Ati - Fglrx Driver - Get Only Black Screen When X Tries To Start And Keyboard Doesn't Work
Feb 24, 2010
I'm trying to fix this problem: [URL] I have a problem with fglrx driver since Catalyst 9.9. After installation and reboot I get only black screen when X tries to start and keyboard doesn't work however when I press power button then the system shuts down properly after a while. I have noticed this for the first time on Hardy after installing Catalyst 9.9 and since then I have the same problem on Karmic and Catalyst 9.10/9.11 as well. I don't understand the bold text, What is this X he's talking about?
View 7 Replies
ADVERTISEMENT
Oct 21, 2010
I just installed Maverick on my HP tx1000. Jockey offered me two drivers for my NVidia Go 6150. I tried the recommended one--and it seemed to be working. It had a green light next to it in Jockey, Compiz worked, etc. Then I rebooted.
Except it didn't reboot--the disk thrashed for a while, and then I was met with a black screen. I tried recovery mode and got a bash prompt...which crashed when I ran `startx'. Then I tried Failsafe X, which did work. After some experimentation, I realized it was the Nvidia driver at fault, so I tried the not-recommended one, which didn't work, and now I've disabled both of them. But isn't there a proper driver for me to use? IIRC, I was using a restricted one with Lucid, and it was working all right.
Fun fact: The day before I installed Maverick, Windows 7 randomly decided to not boot all the way. It would show the splash screen, and then hang with a black screen too. But it works in Safe Mode. And had been working fine for a while beforehand. There must be demons in my graphics card.
View 3 Replies
View Related
Dec 25, 2010
I'm having a pretty serious problem, whenever I try to boot into Ubuntu the screen goes black, I see a flash of purple or violet and then i get a prompt asking for my login credentials, afterwards I'm stuck with a terminal trying to start the gui... I don't know what I'm doing wrong, fresh install tried to reboot after getting the display driversinstalled idk if that could be a problem. I tried to commands in the terminal already:
startx
sudo service gdm start
return = start: Job is already running: gdm
View 1 Replies
View Related
Jan 5, 2011
afeter installing ubuntu studio 10.10 a black login screen after login it asking me to type a command i've typed '' startx '' but it does't work
View 2 Replies
View Related
Dec 16, 2010
When I start ubuntu I can't use my mouse and keyboard. It works in a second when the log in screen appears but then it freeze. It works in bios, grub and safe mode. I use mx518 and ace kl 400.
View 9 Replies
View Related
Mar 1, 2011
I wouldnt be posting here because I like to solve my problems by myself but I just dont know what else to do. I want to go back to the ubuntu world and I tried Kubuntu. After Installing the Fglrx drivers after a fresh install (10.10 32 bits) through the restricted drivers it shows an ugly font ubuntu loading screen and after that the screen turns "off" (like if there was no signal, the "on/off" light flickers) and it stays like that, but I can use the Ctrl+alt+f1 console. Installing the drivers from ati webiste ends in the same result as before. Downloaded Ubunt 10.10 32 bit and installed it, same results. I have a Radeon HD 3300 integrated. I dont know what to do. The open source drivers works well, but there is no 1280x1024 resolution in the screen manage
View 2 Replies
View Related
Apr 8, 2010
Got myself in a bit of a squeeze here. I was messing around with the Xorg install on my Fedora 12 system. I ended up reinstalling it. Now my mouse and keyboard work fine in single user mode / terminal. But if I try and boot to X they dont work at the login screen. HAL and udev are booting. Ive done a udevadm monitor test in single user mode and its seeing the devices connect and disconnect. Ive also tried both USB and PS2 devices. Same issue. Ive tried playing with xorg.conf and generating it with Xorg -configure :1 I dont know to use to fix it. After banging my head against the wall for 20+ hours I decided it was time to ask for help. m just Lynxing around the web at the moment =X
View 2 Replies
View Related
May 12, 2009
I am wondering, what is the status of Intel GMA X4500 driver on Fedora 10.
View 2 Replies
View Related
Apr 3, 2011
My screen is frequently freezing and even the keyboard or mouse doesn't work. I've been told to read the logs, But I don't know where thy are or what to look for?
View 3 Replies
View Related
Jun 11, 2009
I downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
View 11 Replies
View Related
Jan 14, 2010
I have a few issues with my new install of Ubuntu. My screen resolution doesn't go above 800 x 600 and my sound card does not work. I believe these are driver issues.
[Code]....
View 9 Replies
View Related
May 23, 2010
I just installed Kubuntu 10.04 and I am experiencing problems with the fglrx diplay driver.I installed it with Jocky and rebooted.Everything works fine. But everything is so un-smooth. Like dragging & resizing windows.It's not updating instantly.It was smooth before installing fglrx but then I couldn't boot without nomodeset.I am using a widescreen LCD monitor.My xorg.conf
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
[code]....
View 2 Replies
View Related
May 5, 2011
I have a new installation of 11.04 with an ATI Radeon HD 2400 video card that previously worked fine under an earlier release.
I tried installing the proprietary drivers through the Additional Drivers section, rebooted and the video is choppy (dragging windows, etc).
From other reports around the Internet I've read, it's clear I'm not the only one experiencing this issue.
I tried the manual instructions, which turned out to be a mess and ultimately didn't work, either.
View 3 Replies
View Related
Sep 1, 2011
i have noticed that if vista is not the active partition, hybernate does not work. it just goes black and then back to the user icon screen to log back in. another "slight" problem was that i was not able to apply a service pack. after restoring vistas dominance i was able to install the pack. is there any other work arounds for hybernate? even though you might not be interested in cleaning up after microsoft.
View 1 Replies
View Related
Aug 4, 2011
I've been using Fedora 15 LXDE for a few weeks (its been great), and decided to install the ati proprietary drivers (I used the tutorial in one of the general strickies). As soon as I rebooted, I now get the following message:
Code:
Started SYSV: Late init script for live image... ATI external events daemon. into universal adresses I can type stuff using the cursor, but it doesn't do anything. I've tried adding 'runlevel 3' to the boot options in Grub to try and prevent fglrx conflicting with Xorg but it doesn't seem to work, unless I'm doing something wrong.
View 1 Replies
View Related
Jul 18, 2010
I'm trying to install slackware 32 bit 13.1.After loading kernel it asks for keyboard configuration, but keyboard (usb wireless) doesn't work.
Keyboard works on the old 13.0 installation, on bios and also in the boot options of 13.1 installation cd.
I've tried removing legacy usb support and changing usb2.0 speed from high to full. Nothing changed.
Anybody with this strange problem? (kernel of setup seems also to detect it correctly as a trust keyboard).
View 9 Replies
View Related
Feb 5, 2011
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
View 1 Replies
View Related
Oct 11, 2010
I have been using ubuntu 10.04 64 bits for about 3 month. Today I change my keyboard layout, so I want to test if everything is ok so I reboot my computer. When I try to reboot everything is as usual but the problem is that after grub. Nothing only a black screen no matter what i do. I doubt the keyboard layout change something but who knows. I run AMD phenom 940 X 4, 4 gig ram, Ati radeon HD 4870.
View 3 Replies
View Related
Mar 24, 2010
I put Slackware 13 and the scenarios is:
1. I start the computer and after startx I got black screen, the keyboard is not responding the led of the display is yellow etc. Now I reset the computer,
2. Booting Windoze
3. Choose Restart not Shutdown from Windoze
4. Booting Slack
5. startx works fine, the X server is starting and working great.
I have Radeon 9500. I configured X server with 3D accel over 2500 FPS on glxgears. The same problem persists even with X server VESA configured.
View 7 Replies
View Related
Oct 23, 2010
No wireless networking. The ethernet works fine, and the wireless interface itself works well in Windows 7 (dual boot). Tried: Ndiswrapper, notoriously quirky, does not seem to work with the XP driver (the oldest driver available for the RTL8191SE). The linux driver offered on the manufacturer's website lacks any installation instructions. I have no clue how to install a linux driver. SUSE seems to have two network managers that are constantly complaining about control: Network Manager and Yast. Neither are great and I am left missing my Ubuntu.
However, my audio only seems to work on SUSE. I have tried almost every distro on this machine. Ubuntu lacked sound and wireless, Fedora played startup sounds, but would not play an mp3 or wav file (fiddling with the mixer did not help). And Fedora also lacked wireless support. PCLinuxOS, my favorite, lacked sound and wireless. Tried some oldies too. ELE, DSL, Puppy, Ubuntu Netbook remix, Vector, Browserpuppy, Crunchbang, Cruncheee (just for experimental sakes) and probably others I am not remembering. So far, installing a free linux distro has cost me 14 dvd-R's and countless hours of installing, reformatting and reinstalling. Part of me really wanted crunchbang to work, as I love the minimalism and blacked-out theme.
I need wireless network access. The wireless light remains red in Linux and pressing the key does nothing to start the device. In Windows 7 it always lights white and works perfectly. Why hasn't SUSE adopted a gui for ndiswrapper? Other distros have it. Why is my brand new laptop, which is by no means abnormal in make or configuration, not 100% supported natively by any Linux distro? I just updated to the new kernel yesterday. So I should be running the most modern operating system available. Yet good-ol Windows 7 is my only fully functional environment.
View 6 Replies
View Related
Oct 17, 2010
what it is, is I installed Maverick fresh (not an upgrade) and it now will go to were it says ubuntu, and has the loading dots, and it stays at a black screen after that. The 'thinking' light for my computer is not activationg. it is installed on a 20-30 Gb partition, on a dual boot with windows 7. I had had Lucid installed a while ago, but it was lost when my harddrive was wiped a while back. My specs:
Computer: Lenovo g555
CPU Type: AMD Athlon II Dual-Core
CPU Speed: M320(2.1GHz)
CPU L2 Cache: 1MB
HDD: 160GB
[Code]...
View 9 Replies
View Related
Jan 12, 2011
Well my problem is described simple as that Black screen on start up. y laptop became a bloodless zombie after I installed BOCHS, Avast 32 bits (forced architecture) and the one I think may be the problem: Driver Manager or something like that wich is PySDM I think. This one is supose to configure mi Hard disk to automount.
View 2 Replies
View Related
May 15, 2011
To start this is on my mom's laptop which is a Gateway NV78.
It was running fine with Ubuntu 10.10 but I like to do a clean install of the latest version when it comes out and I am home. I torrent the 11.04 desktop 64 bit releaee and strangely the screen is just black but it appears to load. Then I try to the 64 bit alternate install which appears to work fine. Unfortunately, the screen is black when loading past GRUB and plays the Ubuntu sound. To test if it is loading I type in my password and hit enter and the Ubuntu log in sound plays but still nothing on the screen.
I thought no big deal I will just install 10.04.2 and use the alternate download. I download it on the desktop running Windows 7 and use the USB installer the Ubuntu website recommends. It installs fine but the same problem occurs with a black screen.
At this point I think to reinstall again but this appears at the top of the screen.
SYSLINUX 3.86 20-04-01 EBIOS Copyright (C) 1994-2010 H. Peter Anvin et al
The screen is just stuck there with a blinking cursor and if press any keys it beeps several times.
TL;DR Installed 11.04 then black screen. Installed 10.04.2 then black screen. Install 10.04.02 again and error message.
View 3 Replies
View Related
May 15, 2011
So I got Ubuntu installed alongside my Windows, but now when I start I get a message on my monitor saying about input not being support or something; usually happens if the resolution isn't supported. If I hit random buttons eventually Ubuntu will start up, but I don't want to be doing that every time I remember when I had an older version of Ubuntu a screen would appear where I could pick to start either Ubuntu or Windows, so I assume that's what's going wrong.
View 9 Replies
View Related
Aug 11, 2010
l have install Itunes through wine , but the problem is that when a want to start iTunes the screen is getting black !?And also when l try to uninstall the screen is getting black.
View 5 Replies
View Related
Jan 25, 2010
After installing Ubuntu and seeing my resolution would only go to 800 x 600, I found this strange. A message popped up about the nVidia drivers I could downlaod that would enable me to do more so I did. I restarted and all was fine. Nice effects, high resolution. However, after going on XP, then going onto Ubuntu, the screen ahs gone black. The white Ubuntu logo can be seen for a while as it loads, but then the monitor goes completely blank as I hear the sound when the log-in screen appears.As I said in my title, it was the 185 driver
View 3 Replies
View Related
Apr 19, 2010
Got a problem with Ubuntu 9.10 and a Lenovo T400 with an ATI Radeon Mobility HD3400 and ATI drivers /ATI contol center. Whenever the laptop wakes up from power-saving mode, the screen goes black (with some jagged mulicolored lines).
View 2 Replies
View Related
Nov 27, 2010
just installed 10.10 on my Sony Vaio F laptop. Here's my specs:Processor: Intel Core i7 720QM (1.6 GHz)Memory: 6 GB DDR3 (1333 MHZ)Graphics: NVIDIA GeForce 330M (1 GB VRAM)Hard Drive: 500 GB (7200 rpm)Native Resolution: 1920x1080I shrunk my Windows partition, installed Ubuntu on it's own partition with swap space, and mostly everything went fine. When I booted up, the resolution was set at something like 2048x1536, and it only displayed the top left corner of about 70% of the screen. When I changed to any other resolution, it looked really bad, and the whole screen still wasn't displayed.
Then something popped up telling me to install a driver for my graphics card, so I did, figuring it would fix the problem. When I booted and picked Ubuntu, I was stuck with a black screen. So I restarted and tried booting into safe mode. I got in, and it displayed the whole screen at 800x600. Still no luck in regular mode, however.
View 2 Replies
View Related
Nov 29, 2010
I've been using ubuntu fine for a while when I decide to activate my nvidia graphics card.After rebooting, however, I hit nothing but a black screen. I've searched the nets and others have seemed to solve the problem after hitting alt+ctrl+f1/f2 and editing some files after that, but that doesn't work for me. Booting into recover console gives me nothing but a long stream of white words before it runs to --> done. and then it goes back to a black screen. Running from Live CD I can't access my ubuntu files.
View 3 Replies
View Related
Jan 29, 2011
I am making a switch over to Ubuntu from windows on one of my kids machines.It has a Nvidia video card, a g-force fx 440 i believe, or something like that.Anyway I just loaded up Ubuntu 10.10 and and it seems it does not recognize my video card. If i go tosystem>administration>Additional drivers, the dialog comes back with "No proprietary drivers are used on this system. Ok so now I go to Ubuntu Software center and search nvidia..... I get the option to installl Nvidia binary x.org driver (version 185), I do so
Now in the Additional drivers dialogue it tells me "this driver is active and currently in use". Awsome, Now when I click on Nvidia X Server settings under system>Administration I get the following dialogue."You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."If i do what that last message said, run sudo nvidia-xconfig in the terminal, It gives an error saying the xconfig file is not there, and it will create one. The next time I reboot Ubunut just shows a black dos like screen asking for username and password. If i put it in, it does nothing, I end up having to re-install ubuntu.
View 6 Replies
View Related
