I had some problems with ububtu because it doesn't work very well with Intel cards. Anyway I've downloaded Fedora 11 and Now i am using it without installation. I'd like to install it over ubuntu I have to choose this option right ? "replace existing using system"?
View 8 Replies
I'm trying to do a simple install. Wipe out existing system and replace with 11.04 but I can't get past initial screen. Is there a different CD version I need to use? Last year I used 10.04 LTS and it worked fine, this year I wanted to start with the newest and go from there. I use Remastersys to make my own install version for 600+ laptops and I need to be able to wipe out the existing systems without effort.
View 5 Replies View RelatedDid anybody tried installing the latest adobe flash named Square for amd64 systems? I was interested in knowing whether there is any improvement in the performance. I also want to know how to replace my existing 32 bit wrapper based flash on 64 bit browser and install this 64 bit flash.
View 5 Replies View RelatedI have Win XP installed on one hard disk drive (HDD1) and Ubuntu 9.10 installed on another hard disk drive (HDD2). Win XP was installed first then Unbuntu 9.10 which set up a dual boot menu. Win XP will no longer boot because I changed the BIOS setting from IDE to AHCI. The problem this causes is described at [URL]. The problem is that if you installed Windows in IDE mode (ie you didn't use F6 and supply a driver disk), then simply changing the BIOS setting to AHCI mode and rebooting will cause Windows to fail and will require a repair install. Most people have been advising to reinstall Windows if you want AHCI enabled. I have read that Win 7 supports AHCI "out of the box" so instead of re-installing Win XP I want to install Win 7 to replace it. I would like to know in advance what installing Win 7 will do to the dual boot menu?
View 3 Replies View RelatedI would like to replace the exiting kernel in one of my Fedora 11 installs with an earlier kernel from a Fedora 10 Unity Spin...so I can use it to bring ATI functionality to Fedora 11. Also, I recall there being a way to unpack rpms and 'repackage' them using a different kernel development set. How is this done?
View 3 Replies View RelatedI have recently installed Fedora 10 in my x86_64 system and fully updated. The updation size was nearly 650MB. My question is can I make a an updated installer DVD from my existing fedora system?
View 8 Replies View RelatedI've had such good luck with Fedora (and this Forum), I'm attempting to put F12 on wife's brand new Sony Vaio, a VPCEB11FM, a 64bit system. I downloaded the Fedora-12-x86_64-netinst.iso, made sure it was ok with sha256.exe, then burned the image to DVD. Booted it up and let it default to "install or upgrade an existing system". It dead-ended in a dark blue or black screen. I re-started and examined the other options. Thought I'd try the one that says: "Install system with basic video driver". Got all the way through to where it got ready to start downloading files. Can't get past that point because it attempts to get to the Internet using the Sony's wireless card! Why would it try the wireless when there's a wired NIC card in this PC that requires no special driver etc. How to proceed from here?
View 3 Replies View RelatedI had Windows 7 RC installed and F10 on the same machine. HP 6730s Intel Dual Core. Everything was working fine and I don't remember doing anything special when installing Fedora 10. I decided to install F11 from DVD, installation went fine but after rebooting all I get is "non-system disk error or disk error. replace and strike any key when ready". I couldn't find any relevant post in this forum and googling I found that this could be a disk starting to fail but I don't thing this is the case here. I'm trying to reinstall just now, I chose to install grub at /dev/sda (default), should it be /dev/sda1 ?
View 7 Replies View RelatedI am starting to have lots of unusual problems show up on my Ubuntu 10.04 install, missing Icons for the Volume Slider, Email Icon, and a Error mounting Static on startup (because I plugged in my Smartdisk FDUSB-TM2 Mitsumi Model #: D353FUE) and it is trying to mount as SDC instead of as a USB Floppy Drive.....and it DOES NOT work as a USB Floppy Drive on 10.04.REF:[URL] I have my system set up as follows:
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
If I boot from the LiveCD again, and Install again from the LiveCD, will all my installed software still be functional, or will I have to re-install, and repeat everything I have done to build my system to date since my system is on / and is a separate partition?
I have 2 750GB harddrives with multiple NTFS and ext3 partitions and have just added two empty 1.5TB drives (with WD Advanced Format Technology) to the computer. I have several external drives of various capacities for temporary data storage. My final objective is to have two mirrored RAID arrays that I can access with both Ubuntu 10.04 and Windows Vista (which I still need for applications that aren't supported by WINE), and I'm trying to find out how to do this.
At the moment, the 1.5TB disks are mirrored in the BIOS settings, and I was able to add a blank NTFS partition to the array using GParted. However, I am now unable to mount any of my partitions (other than the Ubuntu one) and cannot use GParted to copy a partition to the RAID array (I get a generic resource in use message, but I have no other applications open and am opening GParted after a fresh boot).
My Ubuntu install is heavily customized, so I would prefer not to reinstall it if at all possible. If it matters, the OS was not installed as 10.04, but was updated incrementally over time, starting at Hardy Heron. I initially did an apt-get install of dmraid and kpartx after reading [URL]
For some reason, my 750GB drives are recognized as belonging to a broken RAID array even though they are not set up that way in BIOS.
HD configuration:
sda: (I cannot mount any of these partitions )
1: ext3 (Debian Installation)
2: ntfs (Vista Installation)
3: ntfs (Data)
[Code].....
I have an existing Fedora 15 system installed from scratch.I've ordered a harddrive identical to my SDA and want to add it to my existing system as a RAID1 setup.I've googled around and cannot find recent clear instructions how to accomplish this. I don't want to reinstall everything from scratch. It should be possible to create the RAID1 using the existing data disk and then mirror everything up?
View 1 Replies View RelatedI've read many of the postings on ICH10R and grub but none seem to give me the info I need. Here's the situation: I've got an existing server on which I was running my RAID1 pair boot/root drive on an LSI based RAID chip; however there are system design issues I won't bore you with that mean I need to shift this RAID pair to the fakeraid (which happens to most reliably come up sda, etc). So far I've been able to configure the fakeraid pair as 'Adaptec' and build the RAID1 mirror with new drives; it shows up just fine in the BIOS where I want it.
Using a pre-prepared 'rescue' disk with lots of space, I dd'd the partitions from the old RAID device; then I rewired things, rebooted, fired up dmraid -ay and got the /dev/mapper/ddf1_SYS device. Using cfdisk, I set up three extended partitions to match the ones on the old RAID; mounted them; loopback mounted the images of the old partitions; then used rsync -aHAX to dup the system and home to the new RAID1 partitions. I then edited the /etc/fstab to change the UUID's; likewise the grub/menu.list (This is an older system that does not have the horror that is grub2 installed) I've taken a look at the existing initrd and believe it is all set up to deal with dmraid at boot. So that leaves only the grub install. Paranoid that I am, I tried to deal with this:
dmraid -ay
mount /dev/mapper/ddf1_SYS5 /newsys
cd /newsys
[code]....
and I get messages about 'does not have any corresponding BIOS drive'. I tried editing grub/device.conf, tried --recheck and any thing else I could think of, to no avail. I have not tried dd'ing an mbr to sector 0 yet as I am not really sure whether that will kill info set up by the fakeraid in the BIOS. I might also add that the two constituent drives show up as /dev/sda and /dev/sdb and trying to use either of those directly results in the same error messages from grub. Obviously this sort of thing is in the category of 'kids don't try this at home', but I have more than once manually put a unix disk together one file at a time, so much of the magic is not new to me.
After lots of trouble with the new Nvidia stuff in Fedora 12 I gave up and am trying to switch to an ATI Radeon 4350 card in the existing system.I have removed the Nvidia refs with rpm -e, deleted /etc/X11/xorg*, and installed the card. I am only able to get a maximum resolution of 1024x768. Here's what I've done:
Boot and su/delete all refs: /etc/X11/xorg*
Reboot. System comes up with 1024x768
Select Administration->Display to run system-config-display.
Su/password dialogue
[code]....
If I try to add a mode line following Depth 24, It is ignored by system-config-display and overwritten. This worked with the Nvidia installation and I was able to select my resolution above 1024x768.
I want to find out how to create a Fedora installation CD from an existing Fedora System. I cant find my CDs and I want to set up another system. What commands do i use or how do I go about it.
View 1 Replies View RelatedWhat happens if I install the DVD version of Fedora 15 over an existing installation of Fedora 15-KDE? Will it cleanly add any software I don't already have, or will it change or disrupt my installation?
View 5 Replies View RelatedI had done a new lucid install to a 1 TB RAID 1 array using the alternate CD a few weeks back. I messed up that system trying to some hardware working that lucid doesn't have drivers for yet, so I gave up on it and reinstalled to a single 80 GB disk that I now want to move over to the RAID array.
I moved all of the existing files on the array to a single folder, then copied all of the folders from the 80 GB disk over to the array with permissions and symlinks (minus the contents of /proc and /sys, which I created empty).
These are the commands I used:
Quote:
p -a -d -R -v -t /media/raid_array /b*
cp -a -d -R -v -t /media/raid_array /d*
cp -a -d -R -v -t /media/raid_array /e*
cp -a -d -R -v -t /media/raid_array /h*
[Code]....
I tried to change fstab to use the 689a... for root, but when I try to boot, it's still trying to open /dev/disk/by-uuid/412d...
So then I booted from the single disk again and chrooted into the array, then ran update-initramfs -u. I got 3 "grep: /proc/modules: No such file or directory" errors, and "cat: /proc/cmdline: No such file or directory"- so I created directory /proc/modules, created an empty file /proc/cmdline, and ran the initramfs update again. Then I tried to shut down, which hung (probably because I was doing all of this from a terminal window in Gnome), so I killed the power after a couple of minutes.
It's still trying to use /dev/disk/by-uuid/412d... to boot.
What am I missing? I assume I just have to change the UUID to mount as root, but I don't know how.
I installed Fedora and my existing boot up menu (Ubuntu & XP) disappeared leaving only Fedora. Using my Super Grub cd (boot trouble shooting cd) I recovered my previous boot system but it left me without the Fedora option. My question is, how can I integrate Fedora into my existing menu?
View 1 Replies View RelatedI have a dual-boot system with XP and Fedora. I had to reinstall XP a while ago. After XP reinstallation, to regain access to Fedora, I ran Fedora installation DVD. It told me that the hdd had a "loop file system" and that I had to reinitialize it. I chose "ignore", "upgrade" and then "Create new boot loader configuration". Everything works fine now, but when I tried to install F11 from a live cd I discovered that I couldn't. It can't edit the lvm part (nor delete it). The only things possible are to reintall F10 with the DVD that created the lvm in the first place or install F11 using preupgrade (the lvm remains ext3 so preupgrade can't edit it either).
My question is: how can I get rid of the lvm part without reinitializing the hdd (I don't want to lose the data on the other partitions). I want to reinstall Fedora but without lvm.I heard something about "fdisk" and "lvremove", but I have no idea how to use these, so I would like a detailed solution (something close to a tutorial).
i ve installed fedora 14 a few days ago, but i m not at all happy with it. i also have on the same disk, a windows xp partition, and another disk with data. i am a newbie, so i wanna know if there is a guide, or tutorial, or some guidelines if possible, on how to replace fedora with ubuntu 10.10. i ve tried to initiate the installation, but i only got the options to use free space, or erase entire disk. well, to be honest, there is a third option, prompting me to manually decide the partitions, but i know nothing about it.
View 2 Replies View Relatedwill it be possible to convert existing filesystem to new ext4 while upgrading from Fedora 10?
View 1 Replies View RelatedI have fedora 12 currently installed on my laptop, but would like to install another version along side it. How do I do this? Will it detect the second version automatically and add a grub entry? Or do I need to do something else. Also, what partitions need formatting, do any new one except '/' need creating?
Current layout>
/dev/sda1 ext4 /boot 200 MB
/dev/sda2 ext4 20 GB <--- I want to install new version here.
/dev/sda3 ext4 / 20 GB
/dev/sda4 extended 425 GB
/dev/sda5 ext4 /media/Media 425 GB
I downloaded the Fedora respin DVD from [URL]. I burned the image and tried to upgrade my existing RussianFedora 10 distro. However, even after the successful completion of upgrade process, I boot into the same old RussianFedora 10. I would, also, like to mention that the upgrade process seemed to be unusually fast, it took only 15 mins for the complete process!
View 2 Replies View RelatedI need to remove my dual boot of WinXP & F9 to replace them with F10. Should I format the disk before installing F10? I'm still a beginner in Fedora. & How is the fedora 10? do you recommend replacing it compared to F9?
View 14 Replies View RelatedI have recently been given the task of setting up some thirty odd netbooks with F10 and i was wondering if there is a way to generate a kickstart file from the first netbook (my one lol ) that i have setup to our needs so as to use it to create the same install on the rest of the netbooks. i had thought that i could use the anaconda-ks.cfg file in root's home dir but it is not at all representative of the custom package list i chose during the install.
View 8 Replies View RelatedI want to replace the Ubuntu with Fedora in my laptop(model:hp EliteBook 8540W). After I opened the machine, the status is as follows:
[Code]....
I have some questions about installation:
1) How to partition space for Fedora? (this space is 128GB occupied by Ubuntu currently). Maybe I cannot use Gparted to partition. Will it influence windows system after partition? (because the windows loader is on /dev/sda1)
2) Do I need replace Ubuntu's grub2 bootloader with installing Fedora's grub? How to do?
3) Can you introduce me all the steps in detailed before installation? Because I can not
I've been running Fedora Core 3 on a P4 450 as a personal Samba server and domain controller. It's worked so well that I never gave any thought to upgrading. The other night, I noticed that Up To Date wasn't working, and that Firefox was acting strangely. I made the FC 13 installation disks, whereupon I found out that the system didn't have enough memory.
Rather than mess with the P3 450 any more, instead I swapped main boards and decided to do an upgrade. it even possible to do an "upgrade" from 3 to 13? Is it possible to maintain my existing partitions/settings. I've backed up everything that I'd be too unhappy to lose. It's a two drive system and the second is nothing but data, none of it catastrophic to lose, but at least disappointing. I'd like to keep the data and settings on the primary disk, but won't cry if I can't.
I am using Windows 7 and Ubuntu 10.4 side by side But i want to replace ubuntu with fedora i have a 64 bit machine I have downloaded fedora 14 iso image. My pc does not boots from a usb and I do not have a cd rom. I want to replace ubuntu with fedora with removing or disturbing my windows.
View 4 Replies View RelatedI've just got another sata HDD and thought lets put in a nice install of Fedora 14 having tried out the live CD over the weekend. Right my system is configured thus
[Code]...
will Fedora 14's install program make an addition to the existing GRUB configuration or will it do something different Yes I have searched.... and looked at the installation documents....
i tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
p1 ext4 21gb /home
p2 ntfs 64gb
p3 ext3 18gb ubuntu installation
[code]....
the steps for how to connect my system to existing LAN.
View 3 Replies View Related
