Ubuntu Installation :: Wipe Out Existing System And Replace With 11.04
Aug 15, 2011
I'm trying to do a simple install. Wipe out existing system and replace with 11.04 but I can't get past initial screen. Is there a different CD version I need to use? Last year I used 10.04 LTS and it worked fine, this year I wanted to start with the newest and go from there. I use Remastersys to make my own install version for 600+ laptops and I need to be able to wipe out the existing systems without effort.
View 5 Replies
ADVERTISEMENT
Sep 16, 2009
I had some problems with ububtu because it doesn't work very well with Intel cards. Anyway I've downloaded Fedora 11 and Now i am using it without installation. I'd like to install it over ubuntu I have to choose this option right ? "replace existing using system"?
View 8 Replies
View Related
May 22, 2010
I have Win XP installed on one hard disk drive (HDD1) and Ubuntu 9.10 installed on another hard disk drive (HDD2). Win XP was installed first then Unbuntu 9.10 which set up a dual boot menu. Win XP will no longer boot because I changed the BIOS setting from IDE to AHCI. The problem this causes is described at [URL]. The problem is that if you installed Windows in IDE mode (ie you didn't use F6 and supply a driver disk), then simply changing the BIOS setting to AHCI mode and rebooting will cause Windows to fail and will require a repair install. Most people have been advising to reinstall Windows if you want AHCI enabled. I have read that Win 7 supports AHCI "out of the box" so instead of re-installing Win XP I want to install Win 7 to replace it. I would like to know in advance what installing Win 7 will do to the dual boot menu?
View 3 Replies
View Related
Sep 23, 2010
Did anybody tried installing the latest adobe flash named Square for amd64 systems? I was interested in knowing whether there is any improvement in the performance. I also want to know how to replace my existing 32 bit wrapper based flash on 64 bit browser and install this 64 bit flash.
View 5 Replies
View Related
Sep 30, 2010
I am starting to have lots of unusual problems show up on my Ubuntu 10.04 install, missing Icons for the Volume Slider, Email Icon, and a Error mounting Static on startup (because I plugged in my Smartdisk FDUSB-TM2 Mitsumi Model #: D353FUE) and it is trying to mount as SDC instead of as a USB Floppy Drive.....and it DOES NOT work as a USB Floppy Drive on 10.04.REF:[URL] I have my system set up as follows:
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
If I boot from the LiveCD again, and Install again from the LiveCD, will all my installed software still be functional, or will I have to re-install, and repeat everything I have done to build my system to date since my system is on / and is a separate partition?
View 6 Replies
View Related
Jul 26, 2009
I would like to replace the exiting kernel in one of my Fedora 11 installs with an earlier kernel from a Fedora 10 Unity Spin...so I can use it to bring ATI functionality to Fedora 11. Also, I recall there being a way to unpack rpms and 'repackage' them using a different kernel development set. How is this done?
View 3 Replies
View Related
Aug 12, 2010
I have 2 750GB harddrives with multiple NTFS and ext3 partitions and have just added two empty 1.5TB drives (with WD Advanced Format Technology) to the computer. I have several external drives of various capacities for temporary data storage. My final objective is to have two mirrored RAID arrays that I can access with both Ubuntu 10.04 and Windows Vista (which I still need for applications that aren't supported by WINE), and I'm trying to find out how to do this.
At the moment, the 1.5TB disks are mirrored in the BIOS settings, and I was able to add a blank NTFS partition to the array using GParted. However, I am now unable to mount any of my partitions (other than the Ubuntu one) and cannot use GParted to copy a partition to the RAID array (I get a generic resource in use message, but I have no other applications open and am opening GParted after a fresh boot).
My Ubuntu install is heavily customized, so I would prefer not to reinstall it if at all possible. If it matters, the OS was not installed as 10.04, but was updated incrementally over time, starting at Hardy Heron. I initially did an apt-get install of dmraid and kpartx after reading [URL]
For some reason, my 750GB drives are recognized as belonging to a broken RAID array even though they are not set up that way in BIOS.
HD configuration:
sda: (I cannot mount any of these partitions )
1: ext3 (Debian Installation)
2: ntfs (Vista Installation)
3: ntfs (Data)
[Code].....
View 3 Replies
View Related
Apr 16, 2011
how do i wipe the system runing ubuntu 10.04? can i use sudo fdisk tryed many times but cant find the right command .
View 7 Replies
View Related
Mar 12, 2011
I've read many of the postings on ICH10R and grub but none seem to give me the info I need. Here's the situation: I've got an existing server on which I was running my RAID1 pair boot/root drive on an LSI based RAID chip; however there are system design issues I won't bore you with that mean I need to shift this RAID pair to the fakeraid (which happens to most reliably come up sda, etc). So far I've been able to configure the fakeraid pair as 'Adaptec' and build the RAID1 mirror with new drives; it shows up just fine in the BIOS where I want it.
Using a pre-prepared 'rescue' disk with lots of space, I dd'd the partitions from the old RAID device; then I rewired things, rebooted, fired up dmraid -ay and got the /dev/mapper/ddf1_SYS device. Using cfdisk, I set up three extended partitions to match the ones on the old RAID; mounted them; loopback mounted the images of the old partitions; then used rsync -aHAX to dup the system and home to the new RAID1 partitions. I then edited the /etc/fstab to change the UUID's; likewise the grub/menu.list (This is an older system that does not have the horror that is grub2 installed) I've taken a look at the existing initrd and believe it is all set up to deal with dmraid at boot. So that leaves only the grub install. Paranoid that I am, I tried to deal with this:
dmraid -ay
mount /dev/mapper/ddf1_SYS5 /newsys
cd /newsys
[code]....
and I get messages about 'does not have any corresponding BIOS drive'. I tried editing grub/device.conf, tried --recheck and any thing else I could think of, to no avail. I have not tried dd'ing an mbr to sector 0 yet as I am not really sure whether that will kill info set up by the fakeraid in the BIOS. I might also add that the two constituent drives show up as /dev/sda and /dev/sdb and trying to use either of those directly results in the same error messages from grub. Obviously this sort of thing is in the category of 'kids don't try this at home', but I have more than once manually put a unix disk together one file at a time, so much of the magic is not new to me.
View 2 Replies
View Related
Feb 17, 2010
I was reading a website about securely wiping data from your hard drive with wipe on the right click menu, when I stumbled across part of the article where it talked about journaling filesystems.Article
Quote:
There are three types of journaling: journal, ordered and writeback. Using shred, with an ext3 file system presents the user with the problem of secure deletion because it can only really be effectively used with ordered and writeback journals. It also lists ext4 as a journaling file system in the article, so I looked up the wikipedia page on it and I also found this:
Delayed allocationExt4 uses a filesystem performance technique called allocate-on-flush, also known as delayed allocation. It consists of delaying block allocation until the data is going to be written to the disk, unlike some other file systems, which may allocate the necessary blocks before that step. This improves performance and reduces fragmentation by improving block allocation decisions based on the actual file size. So I am confused about this delayed allocation thing. My thoughts are that ext3 and other journaling filesystems are bad to use with secure wipe when they are set on journal mode because that writes the file to the journaling sector as well as to the hard drive. Apparently, in ext3, the default was ordered mode. I would like to know if anyone has any idea if the ext4 file system on karmic 64bit is hazardous to the security of using the wipe command.
View 2 Replies
View Related
Apr 29, 2011
I have a real love/hate relationship with Ubuntu. A few weeks back my Windows XP crashed and I had to take it to a tech to have my drive wiped and the operating system reinstalled. Just when I got XP back up and working perfectly someone told me to try Ubuntu. I made the Ubuntu 10.10 boot installation disc and installed it. Although I partitioned the drive during the install I was never able to reboot to Windows and thus lost all the files and programs I had just finished installing.
Okay. long story short: I got used to running Ubuntu and started to like it. Then this morning I was prompted to upgrade to Natty 11.04. After the install I got a message about being low on utilities and to boot in the Ubuntu Classic mode, which I was not able to do.
So now my machine is virtually non-functional. It won't run any programs but sometimes if I'm lucky I can get the computer to shut off without pulling the plug from the wall. I think I just need to wipe the drive and start over. Can someone tell me how to do this using DOS without having to make another long trip to my tech? Luckily I have a Windows XP laptop to use to access this forum.
View 1 Replies
View Related
Feb 19, 2009
I have recently installed Fedora 10 in my x86_64 system and fully updated. The updation size was nearly 650MB. My question is can I make a an updated installer DVD from my existing fedora system?
View 8 Replies
View Related
Jun 22, 2010
I've had such good luck with Fedora (and this Forum), I'm attempting to put F12 on wife's brand new Sony Vaio, a VPCEB11FM, a 64bit system. I downloaded the Fedora-12-x86_64-netinst.iso, made sure it was ok with sha256.exe, then burned the image to DVD. Booted it up and let it default to "install or upgrade an existing system". It dead-ended in a dark blue or black screen. I re-started and examined the other options. Thought I'd try the one that says: "Install system with basic video driver". Got all the way through to where it got ready to start downloading files. Can't get past that point because it attempts to get to the Internet using the Sony's wireless card! Why would it try the wireless when there's a wired NIC card in this PC that requires no special driver etc. How to proceed from here?
View 3 Replies
View Related
Aug 1, 2010
I had done a new lucid install to a 1 TB RAID 1 array using the alternate CD a few weeks back. I messed up that system trying to some hardware working that lucid doesn't have drivers for yet, so I gave up on it and reinstalled to a single 80 GB disk that I now want to move over to the RAID array.
I moved all of the existing files on the array to a single folder, then copied all of the folders from the 80 GB disk over to the array with permissions and symlinks (minus the contents of /proc and /sys, which I created empty).
These are the commands I used:
Quote:
p -a -d -R -v -t /media/raid_array /b*
cp -a -d -R -v -t /media/raid_array /d*
cp -a -d -R -v -t /media/raid_array /e*
cp -a -d -R -v -t /media/raid_array /h*
[Code]....
I tried to change fstab to use the 689a... for root, but when I try to boot, it's still trying to open /dev/disk/by-uuid/412d...
So then I booted from the single disk again and chrooted into the array, then ran update-initramfs -u. I got 3 "grep: /proc/modules: No such file or directory" errors, and "cat: /proc/cmdline: No such file or directory"- so I created directory /proc/modules, created an empty file /proc/cmdline, and ran the initramfs update again. Then I tried to shut down, which hung (probably because I was doing all of this from a terminal window in Gnome), so I killed the power after a couple of minutes.
It's still trying to use /dev/disk/by-uuid/412d... to boot.
What am I missing? I assume I just have to change the UUID to mount as root, but I don't know how.
View 2 Replies
View Related
Nov 14, 2010
I have installed Ubuntu within xp abt 6 months before and till now im running dual boot with grub loader. I guess its Ubuntu became the primary OS but not sure. I need to figure out 2 things.
1) Which one is the primary OS. Since the grub loader is showing first, is it ubuntu? or since I have installed ubuntu alongside xp, is it XP? which one gets affected if i format/remove c: drive.
2) And second I would like to format xp and install windows 7 without losing my data, hard drives etc.
Is it possible? I want to just format my windows xp installed c: and want my ubuntu remain untouched, coz I have made many manual configurations and installed many softwares and made my ubuntu more stable than windows, so that i will continue to use ubuntu grub loader henceforth for ubuntu and windows 7.
View 5 Replies
View Related
May 28, 2010
I need to wipe the slate clean on my computer and start from scratch. I have too many issues and school is just around the corner for me, I've got a huge workload and don't have time to find solutions to my problems right now. I recently upgraded to Lucid but that only escalated my woes. The simple fact is my machine is getting too old and it's time to upgrade everything, which won't happen until fall. So for now I simply want to downgrade to hardy because it will be supported until April next year and it is very stable, plus I think it is the release that my graphics card got a decent resolution on (ATI, need I say more?). I'm somewhat of a noob, but I've got my wits about me and have researched the forums for many hours to find solutions, but to no avail. I don't want to go into details about what issues I'm having, I just need to know how to remove ALL kernels off of Grub and start from scratch. Any links to comprehensive tutorials would be ideal, or if someone knows of anything else that will work,
P.S. I love Ubuntu and am a lifer. The philosophy behind it as well as the community are supreme and will someday rule the universe,
View 8 Replies
View Related
Sep 29, 2010
I am having trouble reinstalling grub so That I can see both my linux and windows partitions in the cain loader. Originally I had ubuntu, then I installed window, this wiped out grub so I had to reinstate it, and that went ok. Then I tried to get fancy and install another Linux on my machine. It did not wipe out my partitions but is defunct I have been following these instructions, [URL]
To no success. Grub2 installs fine, sudo grub-install --root-directory=/media/(my part ion) /dev/sda2 and I install it to sda2, but the" Installation finished. No error reported. This is the contents of the device map /boot/grub/device.map. Check if this is correct or not. If any of the lines is incorrect, fix it and re-run the script `grub-install'. (hd0) /dev/sda"
View 3 Replies
View Related
Sep 25, 2009
I had Windows 7 RC installed and F10 on the same machine. HP 6730s Intel Dual Core. Everything was working fine and I don't remember doing anything special when installing Fedora 10. I decided to install F11 from DVD, installation went fine but after rebooting all I get is "non-system disk error or disk error. replace and strike any key when ready". I couldn't find any relevant post in this forum and googling I found that this could be a disk starting to fail but I don't thing this is the case here. I'm trying to reinstall just now, I chose to install grub at /dev/sda (default), should it be /dev/sda1 ?
View 7 Replies
View Related
Apr 28, 2011
After battling to install the yum packege for the LAMP, mI have not been able to finish installing or at least configuring the MySQL.How can I un-install ALL related files for the MYSQL o can I just yum again that package. that is as the first step. I understand that MYSQL instralls with a -null_ passord for the adminstrative rightsI NEVER THOUGHT that installing Wordpress , or any other progrma for that matter, would be so complicated. seems Windows OS has a gtreat advantage there.
View 14 Replies
View Related
Feb 1, 2010
My old-ish Dell laptop is currently running Windows 2000 and Ubuntu 9.10. I originally installed 2000 to try and squeeze a bit more performance out of the laptop for general use, but in practise Ubuntu is running great and sees far more use than the Win2K installation so I've decided to create a stripped-down (i.e. non-networked) XP installation purely to run a few favourite audio applications.
I plan to do a fresh Windows install and wipe the current C: partition. Is there anything I should be aware of in terms of the GRUB bootloader. Will it simply recognise the new XP installation? Obviously I will back up my data before I continue, but are there any other precautions to take with respect to dual-booting? I could do without having to reinstall Ubuntu too!
View 4 Replies
View Related
Aug 8, 2011
I had Ubuntu on my hard drive and tried to install Arch Linux. Things got messy and I now have an unstable, unbootable machine. I feel the installation failed because there were remains of Ubuntu. I'd like to wipe the hard drive and start over from scratch; without anything on there. How do I do this? I have several partitions made in a desperate attempt to make it all work. So I'd like to remove all partitions and any other information that's on the drive. I can not start any OS, but I can boot with the Live USB of Arch Linux...
View 2 Replies
View Related
Apr 8, 2010
i tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
p1 ext4 21gb /home
p2 ntfs 64gb
p3 ext3 18gb ubuntu installation
[code]....
View 6 Replies
View Related
Oct 4, 2010
I want to move my windows XP image from my old PC's C: and put it onto my new PC, with Ubuntu 9.10 already on it. Will this procedure work?First I'll burn an iso image of the windows C: to a CD or DVD, using the Win XP computer. Then, I'll load a (live Ubuntu), from my thumb drive and boot into my new PC, and move the Ubuntu partition to another location, in order to create the partition needed to install a Windows OS. I know that Windows, God bless them, needs to be first on the HDD. This procedure will destroy the grub loader.Then rebooting should load correctly to the grub bootloader, right?
View 9 Replies
View Related
Mar 22, 2010
i have crashed my system, i have a lot of simualtion software already configured and working on it, i'm thinking to do a new installation of ubuntu in a different partition and copy there all directory tree, basically replace the new / directory system, whit the old one that i have back up. Can i do this and everything will works ok?
View 1 Replies
View Related
Apr 4, 2011
I have netbook 10.10 installed on a Acer Aspire One on part of the disk and Windows 7 on another part. (There is no information worth saving in the 10.10 "home" file.)
Can I just install Ubuntu 10.04 as if I were doing it for the first time (as I did with netbook 10.10)? Will 10.04 simply replace 10.10?
View 6 Replies
View Related
Dec 5, 2010
I have just recently installed Ubuntu Server 10.10 32-bit onto an old Gateway Solo 5300 laptop to run as a test server. Since I want it to use all of the disk space, how do I remove the other OS and its existing programs.
View 2 Replies
View Related
Dec 17, 2010
the steps for how to connect my system to existing LAN.
View 3 Replies
View Related
Nov 20, 2009
how to create a new partition from the existing system I am using ubuntu 9.04 as Host system and work on LFS. The command given in LFS book throws i.e
khirod@khirod:/dev$ mke2fs -jv /dev/sda5
mke2fs 1.41.4 (27-Jan-2009)
/dev/sda5 is mounted; will not make a filesystem here!
View 1 Replies
View Related
Jul 14, 2011
I have a 120GB HD that I installed my linux-mint distro to and have been using for a while now, maybe a year or so. However, it has been running great so I haven't paid much attention to the actual install. Recently, I have been getting notifications of very low disk space remaining. I ran gparted and discovered that there is a very large extended partition that doesn't appear to be mounted. Can I just boot into a terminal, set a mount point and be on my way or will this hurt my existing installation? What is the safest set of steps to mount this partition since it looks to be the swap space as well?
Code:
Here is output of fdisk for the drive:
Disk /dev/sdb: 122.9 GB, 122942324736 bytes
255 heads, 63 sectors/track, 14946 cylinders
[Code]....
View 5 Replies
View Related
Jan 26, 2011
Our company just bought faster hard drives for our webserver. A lot of the software and services set up on this machine have had config files set up, etc.. It would take a while to rebuild it from scratch, which i may have to do. I know most config files are in /etc and i can use apt to spit out a list of installed packages.
Any tips that i may want to know to avoid any gotchas here? We need to minimize downtime, of course, and get everything up like it is now.
View 4 Replies
View Related
