Ubuntu Installation :: Reinstall 10.04 LTS Over Existing 10.04 System
Sep 30, 2010
I am starting to have lots of unusual problems show up on my Ubuntu 10.04 install, missing Icons for the Volume Slider, Email Icon, and a Error mounting Static on startup (because I plugged in my Smartdisk FDUSB-TM2 Mitsumi Model #: D353FUE) and it is trying to mount as SDC instead of as a USB Floppy Drive.....and it DOES NOT work as a USB Floppy Drive on 10.04.REF:[URL] I have my system set up as follows:
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
If I boot from the LiveCD again, and Install again from the LiveCD, will all my installed software still be functional, or will I have to re-install, and repeat everything I have done to build my system to date since my system is on / and is a separate partition?
Lost my guru, ran out of HD space, erased too much, need to reinstall. Downloaded ISO, burned disk, tested disc, tried to install, but it fails to recognize old partitions in the prepare space part. Hardware is a 4-system(partition) SSD in RAID 0, with all the bootable systems, and a 4-partition HD in RAID 0 (one disk failing) for data only. How to I get it to recognize a particular partition on the SSD RAID 0 to install over? AND can it reinstall the system software and leave the other stuff as it was installed over 2 years?
On my Desktop I am experiencing a very weird behavior. First of all, I would like to mention that I am posting from the very same machine...just under Windows (which tends me to roll our hardware issues).
Next, a short history I installed 11.2 on my machine when it came out last year. I upgraded my hardware (new mainboard, cpu, ...) without reinstalling. Everything went fine I upgraded to KDE 4.4...still everything ok I did a system upgrade to 11.3 final using zypper And there it starts. After the upgrade, the first boot didnt work as expected (the system just hang). So I just did a restart and 11.3 was up and running. Now, since last week, I cannot boot my system at all. The screen just shows me the boot-splash but the progress bar isnt moving a thing. So I started with the option splash=verbose which did not show me a single line of output. The system just hangs right after the GRUB selection occured. So I decided to download 11.3, burn it to a disc and reinstall it. Well...this doesnt work either At least it shows me some lines of output, which look fine, but some lines after starting KDM the screen goes black and thats it. The only way I got something was when I started the installation in Textmode. I was able to log in but I dont know what to do then. I ran yast2 but it didnt look like I could install the system that way.It would be nice to get it running with my home-partition still in place.
I have 2 750GB harddrives with multiple NTFS and ext3 partitions and have just added two empty 1.5TB drives (with WD Advanced Format Technology) to the computer. I have several external drives of various capacities for temporary data storage. My final objective is to have two mirrored RAID arrays that I can access with both Ubuntu 10.04 and Windows Vista (which I still need for applications that aren't supported by WINE), and I'm trying to find out how to do this.
At the moment, the 1.5TB disks are mirrored in the BIOS settings, and I was able to add a blank NTFS partition to the array using GParted. However, I am now unable to mount any of my partitions (other than the Ubuntu one) and cannot use GParted to copy a partition to the RAID array (I get a generic resource in use message, but I have no other applications open and am opening GParted after a fresh boot).
My Ubuntu install is heavily customized, so I would prefer not to reinstall it if at all possible. If it matters, the OS was not installed as 10.04, but was updated incrementally over time, starting at Hardy Heron. I initially did an apt-get install of dmraid and kpartx after reading [URL]
For some reason, my 750GB drives are recognized as belonging to a broken RAID array even though they are not set up that way in BIOS.
HD configuration:
sda: (I cannot mount any of these partitions ) 1: ext3 (Debian Installation) 2: ntfs (Vista Installation) 3: ntfs (Data)
I'm trying to do a simple install. Wipe out existing system and replace with 11.04 but I can't get past initial screen. Is there a different CD version I need to use? Last year I used 10.04 LTS and it worked fine, this year I wanted to start with the newest and go from there. I use Remastersys to make my own install version for 600+ laptops and I need to be able to wipe out the existing systems without effort.
I have recently found out (also in this forum), that my motherboard is simply put: "junk" (as it fails to see the 8Gigs of ram i have). So i will buy another mobo and would like to hear from you if I should reinstall my ubuntu from scratch or try to just run the same OS as i have now (I know, in the MS world this would mean utter chaos and mobo/processor/ram/everything damage - smoke from the machine etc. So: How safe is it to "hot swap" hardware under Ubuntu?
i use Fluxbox (Mint in Karmic, but after few tweaks and updates i have to reinstall system-but i couldn't even make with gparted and usb-creator startup disk, so i used virtual machine in Mac OS to make some older version (Mint 7 XFCE).BUT, then i discovered that i can not even load the system from USB-although it was all set in bios to startup with USB Stick. How can i persuade my dell mini 10v to start up from live USB Stick.
I've read many of the postings on ICH10R and grub but none seem to give me the info I need. Here's the situation: I've got an existing server on which I was running my RAID1 pair boot/root drive on an LSI based RAID chip; however there are system design issues I won't bore you with that mean I need to shift this RAID pair to the fakeraid (which happens to most reliably come up sda, etc). So far I've been able to configure the fakeraid pair as 'Adaptec' and build the RAID1 mirror with new drives; it shows up just fine in the BIOS where I want it.
Using a pre-prepared 'rescue' disk with lots of space, I dd'd the partitions from the old RAID device; then I rewired things, rebooted, fired up dmraid -ay and got the /dev/mapper/ddf1_SYS device. Using cfdisk, I set up three extended partitions to match the ones on the old RAID; mounted them; loopback mounted the images of the old partitions; then used rsync -aHAX to dup the system and home to the new RAID1 partitions. I then edited the /etc/fstab to change the UUID's; likewise the grub/menu.list (This is an older system that does not have the horror that is grub2 installed) I've taken a look at the existing initrd and believe it is all set up to deal with dmraid at boot. So that leaves only the grub install. Paranoid that I am, I tried to deal with this:
dmraid -ay mount /dev/mapper/ddf1_SYS5 /newsys cd /newsys
[code]....
and I get messages about 'does not have any corresponding BIOS drive'. I tried editing grub/device.conf, tried --recheck and any thing else I could think of, to no avail. I have not tried dd'ing an mbr to sector 0 yet as I am not really sure whether that will kill info set up by the fakeraid in the BIOS. I might also add that the two constituent drives show up as /dev/sda and /dev/sdb and trying to use either of those directly results in the same error messages from grub. Obviously this sort of thing is in the category of 'kids don't try this at home', but I have more than once manually put a unix disk together one file at a time, so much of the magic is not new to me.
My computer is a netbook with no optical drive. I had a friend bring over an external CD drive to burn the live CD, but I don't have that now. Since then, I've messed up my install beyond easy repair, so I was wondering if there was a simple (or perhaps not so simple) command that would reinstall every package from the software repositories (I do have access to the Internet, just no GUI). I'm talking about a clean install here.
I have recently installed Fedora 10 in my x86_64 system and fully updated. The updation size was nearly 650MB. My question is can I make a an updated installer DVD from my existing fedora system?
The program tripwire suggest a reinstall in single user mode before you set up its database. So you can be sure there is nothing scary on the computer to start with.I've tried doing this by a rather crude and direct method
Code: for i in `cat /home/lugo/listOfInstalled.txt`; do apt-get install --reinstall --yes "$i"; done
I'm new to linux and having a lot of problem, and I would really apprecaite the help. It all started when I connected my laptop to an LCD. Since then, my system doesn't detect its own screen. So I have to escape as the start of reboot and go to a recovery mode and select failsafe screen. Ubuntu then set to lowest graphic mode. It's no way to keep a set up for the long run. I've tried to reinstall Ubuntu from a CD but that doesn't work. .
I am running Ubuntu 10.10 and I have been keeping it updated via update manager.Last night the update manager popped up and I selected to update all required updates without checking what the updates were.While shutting down I noticed that I needed to reboot to complete the update, so I rebooted.After reboot the wireless network card disappeared. So I moved the PC and plugged in the ethernet cable. Oddly sometimes it shows disconnected for no reason and I have to reboot.What's even worst is that Ubuntu now locks up completely within 15 minutes of a reboot.None of the alt+sysrq commands do anything!How do I find out what the updates were and is there any way to I revert my system back to pre updates without having to reinstall?
I've had such good luck with Fedora (and this Forum), I'm attempting to put F12 on wife's brand new Sony Vaio, a VPCEB11FM, a 64bit system. I downloaded the Fedora-12-x86_64-netinst.iso, made sure it was ok with sha256.exe, then burned the image to DVD. Booted it up and let it default to "install or upgrade an existing system". It dead-ended in a dark blue or black screen. I re-started and examined the other options. Thought I'd try the one that says: "Install system with basic video driver". Got all the way through to where it got ready to start downloading files. Can't get past that point because it attempts to get to the Internet using the Sony's wireless card! Why would it try the wireless when there's a wired NIC card in this PC that requires no special driver etc. How to proceed from here?
I installed Ubuntu a while ago now and I like it but when I installed it I removed windows and now its starting to annoy me. I cannot sync my ipod touch, I can't play some of my games because they are all meant for windows and wine does not work for then so what I want to do is uninstall ubuntu and reinstall windows xp, then I will reinstall ubuntu and this time around I will make a dual boot. Only one problem, I don't know how to uninstall ubuntu.
My Mini13 came with hardy preloaded, and it's got pretty messed up since, so I'd like to restore factory OS via a grub entry that looks like this: title System Restore root (hd0,2) chainloader +1 boot
This points to a partition which, when mounted, has this stuff in it: bootfs.img initrd0.img install.sh logo.png syslinux.cfg vmlinuz boot.msg install.cfg ldlinux.sys rootfs.img vesamenu.c32
I'm not a computer, but that looks pretty good to me but when I select this grub option it just says: Boot Error Is there a log or something that might give me more info about the error?
So I was messing around trying to uninstall Nibbles and reinstall since I have an issue starting that game and something happened and removed the submenu under Games called "Logic", which had another whole list of games.
Is it possible to reinstall the games package or reinstall the update?I'm thinking more of the lines of a system restore or something so back 2 days from today.
I had done a new lucid install to a 1 TB RAID 1 array using the alternate CD a few weeks back. I messed up that system trying to some hardware working that lucid doesn't have drivers for yet, so I gave up on it and reinstalled to a single 80 GB disk that I now want to move over to the RAID array.
I moved all of the existing files on the array to a single folder, then copied all of the folders from the 80 GB disk over to the array with permissions and symlinks (minus the contents of /proc and /sys, which I created empty).
These are the commands I used:
Quote:
p -a -d -R -v -t /media/raid_array /b* cp -a -d -R -v -t /media/raid_array /d* cp -a -d -R -v -t /media/raid_array /e* cp -a -d -R -v -t /media/raid_array /h*
[Code]....
I tried to change fstab to use the 689a... for root, but when I try to boot, it's still trying to open /dev/disk/by-uuid/412d...
So then I booted from the single disk again and chrooted into the array, then ran update-initramfs -u. I got 3 "grep: /proc/modules: No such file or directory" errors, and "cat: /proc/cmdline: No such file or directory"- so I created directory /proc/modules, created an empty file /proc/cmdline, and ran the initramfs update again. Then I tried to shut down, which hung (probably because I was doing all of this from a terminal window in Gnome), so I killed the power after a couple of minutes.
It's still trying to use /dev/disk/by-uuid/412d... to boot.
What am I missing? I assume I just have to change the UUID to mount as root, but I don't know how.
I had some problems with ububtu because it doesn't work very well with Intel cards. Anyway I've downloaded Fedora 11 and Now i am using it without installation. I'd like to install it over ubuntu I have to choose this option right ? "replace existing using system"?
i tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
I want to move my windows XP image from my old PC's C: and put it onto my new PC, with Ubuntu 9.10 already on it. Will this procedure work?First I'll burn an iso image of the windows C: to a CD or DVD, using the Win XP computer. Then, I'll load a (live Ubuntu), from my thumb drive and boot into my new PC, and move the Ubuntu partition to another location, in order to create the partition needed to install a Windows OS. I know that Windows, God bless them, needs to be first on the HDD. This procedure will destroy the grub loader.Then rebooting should load correctly to the grub bootloader, right?
I have just recently installed Ubuntu Server 10.10 32-bit onto an old Gateway Solo 5300 laptop to run as a test server. Since I want it to use all of the disk space, how do I remove the other OS and its existing programs.
I have a 120GB HD that I installed my linux-mint distro to and have been using for a while now, maybe a year or so. However, it has been running great so I haven't paid much attention to the actual install. Recently, I have been getting notifications of very low disk space remaining. I ran gparted and discovered that there is a very large extended partition that doesn't appear to be mounted. Can I just boot into a terminal, set a mount point and be on my way or will this hurt my existing installation? What is the safest set of steps to mount this partition since it looks to be the swap space as well?
Code: Here is output of fdisk for the drive: Disk /dev/sdb: 122.9 GB, 122942324736 bytes 255 heads, 63 sectors/track, 14946 cylinders
I want to move my "currently installed Debian and its all settings" to a USB flash drive. I am wondering what methods are available out there. I looked into Remastersys but it failed on my system so I am wondering if there is another method available?
I have a lenny system up and running, my CF-card reader is supported and I can mount a 1GB card. My PC _can_ boot from CF cards, I verified... My Linux resides in sda3 (other partition is XP). How would I transfer the partition to a cf card? I tried using dd if=/dev/sda3 of=/dev/sdb1, but as that doesnt work I have the feeling there's more to do... Maybe install GRUB on the CF-Card? Change some paths after copying?
I have an existing Fedora 15 system installed from scratch.I've ordered a harddrive identical to my SDA and want to add it to my existing system as a RAID1 setup.I've googled around and cannot find recent clear instructions how to accomplish this. I don't want to reinstall everything from scratch. It should be possible to create the RAID1 using the existing data disk and then mirror everything up?
In the near future I will be obliged to change my computer. Currently, my system is OpenSuse 11.2 with KDE 4.5.3 on a dual-boot (with WinVista) laptop. I plan to have the new machine again be dual-boot (Win7).
First question: Is there a way to "describe" the current system in a way that, after the initial partitioning and probably a basic installation of OpenSuse 11.2, makes it easy to reproduce the current OpenSuse 11.2 installation (i.e., installed packages, profiles; more?) on the new machine? This would reduce manual work to copying some system files (e.g., /etc/csh.cshrc and similar) and of course /home/username etc.
Second question: Same as first, but this time with a change to OpenSuse 11.3 or the soon to come OpenSuse 11.4. A potential initial installation of OpenSuse 11.2 would be possible.
