Fedora Installation :: Replace Ubuntu And Partition In Laptop?
Apr 11, 2011
I want to replace the Ubuntu with Fedora in my laptop(model:hp EliteBook 8540W). After I opened the machine, the status is as follows:
[Code]....
I have some questions about installation:
1) How to partition space for Fedora? (this space is 128GB occupied by Ubuntu currently). Maybe I cannot use Gparted to partition. Will it influence windows system after partition? (because the windows loader is on /dev/sda1)
2) Do I need replace Ubuntu's grub2 bootloader with installing Fedora's grub? How to do?
3) Can you introduce me all the steps in detailed before installation? Because I can not
Posting this thread using the DEMO variant of 10.04, congrats to the developers that it didn't fail like that of 9.10 for all those who have configured their Modems & Routers to work in 'Bridge Mode'!
Here's my concern:::
I wish to immediately replace my 12GB partition, currently kept aside for 9.04 with 10.04.How to accomplish the same? Installation screen does comes up with 'Manual' preference, but it is confusing & am unable to make any decision owing to great excitement!?
I deleted my Ubuntu Desktop Partition to replace it with Ubuntu Studio but when I went to restart the computer and command line thing about how the Ubuntu Partition is missing is showing up. How do I get it to boot to Windows?I'm currently booting from my emergency Xubuntu USB Stick.
So I just found out how to install Ubuntu, and found something wrong. I made a partition for the install and when I went to install it, it already had 4 partitions. The recovery and other stuff, so that means the partition I made cannot be used. D: How do I fix this?
I'm installing 11.04 on a friend's laptop. I'm fairly familiar with Ubuntu, and I'm sure when I've install it previously it didn't take this long to resize the partition. It's been going for around 15 minutes. The loading cursor is still spinning, and the HDD activity light is on almost solidly, but it's been a long time with no updates. The log says only "ubuntu ntfsresize: Please make a test run using both the -n and -s options before real resizing!". Nothing appears to be happening. Is this normal? Never mind, it failed.
I'm about to install Ubuntu Netbook Remix and my Acer machine has a recovery partition at the beginning of the drive. I've created the eRecovery discs but those will only restore XP - not the actual recovery partition (which I'd like to have in case I sell the laptop later etc).
How can I backup the actual recovery partition, and keep its boot file intact. Then how can I restore this partition at a later time?
i ve installed fedora 14 a few days ago, but i m not at all happy with it. i also have on the same disk, a windows xp partition, and another disk with data. i am a newbie, so i wanna know if there is a guide, or tutorial, or some guidelines if possible, on how to replace fedora with ubuntu 10.10. i ve tried to initiate the installation, but i only got the options to use free space, or erase entire disk. well, to be honest, there is a third option, prompting me to manually decide the partitions, but i know nothing about it.
I am using Windows 7 and Ubuntu 10.4 side by side But i want to replace ubuntu with fedora i have a 64 bit machine I have downloaded fedora 14 iso image. My pc does not boots from a usb and I do not have a cd rom. I want to replace ubuntu with fedora with removing or disturbing my windows.
I need to remove my dual boot of WinXP & F9 to replace them with F10. Should I format the disk before installing F10? I'm still a beginner in Fedora. & How is the fedora 10? do you recommend replacing it compared to F9?
I can take apart my computer and fix a problem and then re-install the partitions. Hopefully I won't have to re-install, but I want to make backups just in case
-HP laptop with a windows (NTFS) and an Ubuntu (ext3) partition ~ 500GB total -Iomega 1TB external hard drive partitioned into a 500GB NTFS storage, 250GH BLANK ext3 Linux Backup, and 250GB BLANK NTFS Windows Backup.
I want to copy my windows and linux to their respective 250GB spaces on the External HD.
1.) Can you direct me to places on the net that describes this in detail? 2.) Can I copy a partition while running that partition? 3.) Will copying C:/ in windows over to the external HD copy entire partition? 4.) Can I copy a Laptop partition to a external HD partition that is bigger? 5.) Do I have to use partition manager software or can I do this from terminal/cmd prompt?
I currently have Ubuntu Desktop 10.10 installed and have a great setup. However, I'm trying to install another OS on the hard drive and need to remove a partition. I've read online that I can remove the Swap partition and use a "Swap file". My question is this: Is it possible to replace the Swap partition with a "swap file" without having to re-install linux?
Dual-booting: Mac OS X 10.6.3 / Ubuntu Desktop 10.10 Macbook Pro 6,1 2.8 GHz Intel Core i7, 4 GB RAM
I have a brand new thinkpad X301 with 4GB of RAM and thinking of getting fedora 11 on it. The plan is to have it triple boot with vista/seven and hopefully OSx86. I am aware of the 4 primary partitions limit on an MBR disk. I was thinking of having a swap file instead of swap partition and not creating a boot partition as well. If I install the boot loader(GRUB?) on the root partition will I be able to boot it without any problems by using vista's boot loader?
Or Maybe I should install GRUB on the MBR and add all the other operating systems on it? Does anyone have any objections for not creating a swap partition or a boot partition? When comes to desktop environment I've been using KDE in the past, is there any major advantage of using Gnome over it? KDE seems to look really nice on fedora where Gnome is maybe more stable?
I'm trying to clone a Linux install to a different laptop. It's made a little complicated by two facts:
1) The 'new' laptop I'm trying to copy my Linux installation to is actually older and has a smaller hard drive then the computer I'm copying from
2) The computer I'm copying from has both a windows and Linux installation; I only care about the Linux partition.
I figured I would copy only the Linux partition from my primary computer to the laptop, sense the laptop doesn't have a large enough hard drive to copy everything. So I used the DD commands to copy SDA3 (main Linux partition) from my main computer to SDA2 of my laptop. When I came back a few hours later I was surprise to find my laptop trying to reboot itself (I never turned it off). It would keep starting to reboot, failing, and restarting itself. Not too surprising sense its boot partition wasn't changed so it's trying to boot into centos when I copied a redhat partition to it.
The problem is that when I used a redhat boot disk the rescue mode was unable to find a Linux partition to mount. /dev/sda2 exists, but trying to mount it gets the complaint "No such file or directory". "fdisk -l" lists sda1 (the boot sector) and sda2. Sda2 is the correct size and reports Linux LVM for its system. But "fdisk -l /dev/sda2" gives the error message "Disk /dev/sda2 doesn't contain a valid partition table" Did I not clone the drive correctly, or was an error caused due to the boot sector not being copied yet (the laptops boot sector is smaller then my old computers, so I can't copy from old computer to laptop)? Can I salvage the laptops partition table somehow, or do I have to repeat the cloning process? And if I do have to re-clone my computer can anyone tell me what I did wrong the first time so it works this time? I don't care if I copy just the Linux partition or both windows and Linux. Even though my main computer has a larger hard drive I'm only using about half of its available space so it should be possible to copy both partitions if I could ignore the unused sections of the harddrive.
Edit: I used DD to copy a tiny part of the Linux partition from my laptop so I could look at it. Most of it is illegible binary of course, but I scrolled through till I found some text right near the beginning:
Code:
VolGroup00 { id="F2MWxh-....-BidcLe" seqno = 1
[code]....
So it seems that the DD command did copy everything over to the laptop, which is good to know. I noticed that it says device="/dev/sda3" right in the middle of the code I just posted. The Linux section of my original computer was SDA3 but I copied it to partition SDA2 of my laptop. So is the problem because the boot partition is for the wrong device? I don't suppose if I modified that one line to say SDA2 it would be able to load correctly? (Not that I know how I would modify the line, short of using the DD command again).
I've tried to upgrade my FC8 on Presario F700 series laptop to FC 10 and facing some issues. I've a live CD (i386). Initially i tried upgrading FC 8 to FC 10 and installation was stuck around 30% completion saying its unable to fins libdbi-0.8.3-1.fc9.i386.rpm. Then I tried to install FC 10 from scratch as system went to inconsistent state and faced two issues with two different setup options -
1) when i selected necessary software to be installed for office use and development, it failed after installing 20% saying libgnomeui-devel-2.24.0-2.fc10.i386.rpm
2) i then opted for for software to be installed for office use (default option) then it failed after installing around 50% saying libXrandr-1.2.3-1.fc10.i386.rpm
im trying to understand if this is a problem due to my laptop configuration (AMD Athlon 64 X2 Duel Core) or due to issue with the live CD.
when I tried to download a installation DVD of F10 for my new thinkPad T500 laptop.The architecture of the processor should be i686 and I downloaded the DVD image Fedora-10-i386-DVD.iso. I understand i686 has backward compatability with i386. But i have following questoins:
(1) why we don't have an installation for i686?
(2) If I install the i386 package, do I get performance downgrades?
(3) Also, why the live DVD has this file called F10-i686-Live.iso?
(4) Finally, I always get message like "Warning: Cannot convert string "nil2" to type FontStruct /usr/bin/xterm: cannot load font -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso10646-1" when I use X application. What's the problem here? BTW, I used Fedora core 8 before I didnt have this problem.
I had Windows 7 RC installed and F10 on the same machine. HP 6730s Intel Dual Core. Everything was working fine and I don't remember doing anything special when installing Fedora 10. I decided to install F11 from DVD, installation went fine but after rebooting all I get is "non-system disk error or disk error. replace and strike any key when ready". I couldn't find any relevant post in this forum and googling I found that this could be a disk starting to fail but I don't thing this is the case here. I'm trying to reinstall just now, I chose to install grub at /dev/sda (default), should it be /dev/sda1 ?
Did anybody tried installing the latest adobe flash named Square for amd64 systems? I was interested in knowing whether there is any improvement in the performance. I also want to know how to replace my existing 32 bit wrapper based flash on 64 bit browser and install this 64 bit flash.
I had some problems with ububtu because it doesn't work very well with Intel cards. Anyway I've downloaded Fedora 11 and Now i am using it without installation. I'd like to install it over ubuntu I have to choose this option right ? "replace existing using system"?
so i had dual booted my laptop with win 7 and fedora 14 when i reinstalled my win 7 i lost my fedora 14 i don't get the option in which i could select either operating system so does anyone know what is the problem
I don't want to make a mess of the partitions like I did on my desktop when I put 8.04 on it, so need some help please. I have a 320g hard drive with win7 on it and a recovery partition for it also. What it came with. I would like to install v10.10 and have a home partition too. So I can upgrade later without losing my stuff. And keep win7 just to try out occasionally. I ran the install cd but didn't understand how to partition it with the install routine. I have a copy of gparted on cd but I haven't tried it yet, so I can use it if need be.
I just installed Fedora 11 on my HP Compaq laptop that had the original factory disk layout (Vista, a big 290GB partition and two other for rescue stuff).
The procedure was the following:
1. I resized the largest partition from 290GB to 270GB using gParted. I could boot normally to Vista after that;
2. Installed Fedora normally using the free 20GB.
After the installation I cannot boot anymore. After the BIOS post the text message shows up:
Non-System disk or disk error replace and strike any key when ready
Did any of you come across this problem before? Is there anything I can do to fix it or at least be able to log into Vista (this is my work laptop...)?
I just attempted to upgrade my laptop from F11 to F13 using yum according to the instructions here. Everything seemed to go fine - the download and install took about an hour - but upon reboot it appears that all of my packages are still fc11 packages. It looks like I got the updates in the F11 repos but not an actual upgrade to F13.
I am willing to install fedora 15 in a 32 bit laptop. My laptop has Getforce 9300M nvidia graphics card. I would like to know if there is any automatic way to install the graphics driver with fedora 15. If yes please provide me the information.
Why i am interested to know is that previously when i was using a earlier version of fedora11 i guess, people in the forum suggested me to download the driver from the nvidia site and install it. It was really painful to install the driver in that way.
A while ago I successfully dual booted my system with Vista and Ubuntu. then Windows 7 came out and I wiped Vista off my laptop and installed Windows 7. The problem is that my laptop no long knows that there is a whole other operating system sitting on the hard disk and I can't access it. What can I do to fix this?
I'm trying to install Fedorad 9 on my windows Vista dell xps laptop in a seperate partition. I can't seem to make my laptop boot off of the DVD i'm burning the Fedora ISO to. I'm just using Windows, not Nero or anything like that. I've changed the boot options in setup, burned the ISO to the DVD and rebooted but I end up in Windows. By the way, should I just go ahead and use Fedora 10 as a new user or has it been "debugged"? I don't need any additional "new version" problems at this point.
I took a perfectly functioning Fedora 10 install on my Dell D410 laptop and did "yum update" on it. Now when it boots, all I get is POST and then the single word "GRUB" on the screen. What'd I do? How do I recover?
