Ubuntu Installation :: Installing Win 7 To Replace XP In Existing Dual Boot Setup
May 22, 2010
I have Win XP installed on one hard disk drive (HDD1) and Ubuntu 9.10 installed on another hard disk drive (HDD2). Win XP was installed first then Unbuntu 9.10 which set up a dual boot menu. Win XP will no longer boot because I changed the BIOS setting from IDE to AHCI. The problem this causes is described at [URL]. The problem is that if you installed Windows in IDE mode (ie you didn't use F6 and supply a driver disk), then simply changing the BIOS setting to AHCI mode and rebooting will cause Windows to fail and will require a repair install. Most people have been advising to reinstall Windows if you want AHCI enabled. I have read that Win 7 supports AHCI "out of the box" so instead of re-installing Win XP I want to install Win 7 to replace it. I would like to know in advance what installing Win 7 will do to the dual boot menu?
View 3 Replies
ADVERTISEMENT
Apr 10, 2011
I have a machine dual-booting with a Windows and an Ubuntu installation on it. I want to reinstall Ubuntu on top of the existing Ubuntu installation on this machine so that I have a fresh install of Ubuntu.I don't mind losing all my data on my Ubuntu partition, but I need to keep all the data currently available on my Windows partition.
View 1 Replies
View Related
Jan 30, 2010
I have a laptop dual booted with Win 7 and Fedora. I want to replace Fedora with Ubuntu. Is it safe to simply delete all the non-ntfs partitions during the Ubuntu install? I just don't want to whack Windoze as I depend on it ofr work. THe current partitions are code...
View 3 Replies
View Related
Aug 4, 2011
I currently have a dual boot system with BackTrack 5 and Windows 7. I no longer want Windows 7, so I wish to replace it with Ubuntu 11.04. What's the best way to remove the Windows partition and install ubuntu in it without screwing my grub loader (having it updated with Backtrack 5 and Ubuntu 11.04)?
View 8 Replies
View Related
Feb 11, 2009
I need to remove my dual boot of WinXP & F9 to replace them with F10. Should I format the disk before installing F10? I'm still a beginner in Fedora. & How is the fedora 10? do you recommend replacing it compared to F9?
View 14 Replies
View Related
Jan 29, 2010
I have been using ubuntu for a little while so i'm not a total newbie. But im not very confident with installing the latest verion of ubuntu studio. Previously i upgraded to ubuntu studio through the terminal window from Jaunty. This time i want to do a fresh install via a DVD. I tried earlier but the part im confused about is the partitioning and formatting process. I have 2 hardrives. One of my hard drives has my XP OS on it along with my entire life. So I cant afford to make a mistake. The other has an older 32bit version of ubuntu studio on it.
I have looked online but I havent found much help. What i was thinking of is just unplugging my windows drive, doing a fresh install on the other. But then i wouldnt know what to expect when i boot up and plug in the XP drive.
View 6 Replies
View Related
Apr 16, 2010
Existing dual boot with Opensuse 11.2 KDE and WIN XP PRO. Tried using Ubuntu 9.10 Live CD to format Opensuse partition and install Ubuntu over Opensuse. Screen locks up, must cold boot system. Checksum number matches correctly. Can I use WIN XP CD to repair boot loader & then install Ubuntu?
View 1 Replies
View Related
Oct 4, 2010
A while ago I messed up my Ubuntu installation so I decided to boot the install from the disc again and overwrite it. It turns out the installation disc does not give you the option to replace a current Ubuntu installation so I was forced to take more space out of my windows [vista] installation. This means I now have 1 ruined Lucid Ubuntu OS, 1 Working Lucid Ubuntu OS and a windows Vista OS system. Is it safe to delete my ruined Ubuntu from inside vista? Is it possible to overwrite my Ubuntu installations? How can I delete them both and then install Lucid again?
I want to know this now as Maverick Meerkat will be released on Sunday and I want to install that in a clean installation without deleting my vista installation. I do not have the Vista installation disc because Vista came pre-installed. I am not willing to buy anything.
View 9 Replies
View Related
Aug 15, 2011
I'm trying to do a simple install. Wipe out existing system and replace with 11.04 but I can't get past initial screen. Is there a different CD version I need to use? Last year I used 10.04 LTS and it worked fine, this year I wanted to start with the newest and go from there. I use Remastersys to make my own install version for 600+ laptops and I need to be able to wipe out the existing systems without effort.
View 5 Replies
View Related
Feb 6, 2010
I have a computer running Ubuntu 9.10. I want to be able to dual-boot Windows XP and Ubuntu. I have seen other tutorials but they are for older versions and I am afraid of doing something that does not work on newer versions and losing data.
View 1 Replies
View Related
Aug 4, 2010
I have created 5 partitions:2 GB ext320 GB ext310 GB ext320 GB ntfs400 GB ntfsI have already installed XP on 20GB ntfs. Will dual boot work if I use the 3 ext3 partitions to install Ubuntu?
View 4 Replies
View Related
Jan 2, 2011
I have a windows 7 machine and installed ubuntu 10.4 32 bit in its own partition. I want to replace the 32 bit ubuntu installation with a 64 bit installation. I downloaded the 64 bit version, booted up on the install cd, and started the install. I got as far as the partition set up before chickening out. I was going to use the manual partition option, select the existing ubuntu partition, reformat, and install. I chickened out because i was afraid that this would also reinstall the grub boot loader without the dual boot option disabling my ability to get into win 7. How should i proceed so that i can replace the existing 32 bit ubuntu with a fresh 64 bit install and still be able to boot into win 7?
View 4 Replies
View Related
Mar 3, 2011
I currently have xp installed on the 1st partition and Ubuntu installed on the 2nd.Both partitions are on the same drive.(Being the 1st drive)I have just purchased a new case and some other components and wish to take the opportunity to change my current setup so that xp is on the 1st drive (alone) and Ubuntu on the 2nd drive (alone) Using clonezilla, I take a backup of each partition separately.I then copy back the xp partition to the 1st disk. I then copy back the Ubuntu partition to the 2nd disk.I gather at his point i run the live Ubuntu cd, open a terminal and run sudo update-grub.
View 2 Replies
View Related
May 20, 2009
how to install fedora on a hdd that already has xp sp2 and setup a dual boot.
View 2 Replies
View Related
Jan 27, 2010
I am planning to move my main OS from Windows to Ubuntu (Yeah I am that impressed) but I wish to move windows to my current smaller hard drive until I find all ubuntu replacement programs i can use then eventually eject the windows drive. The problem is has we all know who dual-boot you have to install windows first before ubuntu as the windows mbr is when grub is stored and gets wiped when you install windows.
It must be possible to add windows as secondary OS while keeping / or reinstating grub must it not it surely (eg on 10.4LTS release it would be ok, but if i installed windows vista or 7 on my secondary hardisk it would destroy grub).
View 9 Replies
View Related
Apr 16, 2010
I have always use dual-booting vista--ubuntu, I am getting bit tired of windows, so I want to install ubuntu, specially lucid is coming soon. I want to have the possibility to install windows in case I will need it in the future, like working with Visual Studio, ubuntu always detect if windows is installed, if windows is installed first, does windows also detect if ubuntu is installed ?
View 8 Replies
View Related
Nov 26, 2010
I'm thinking of dual-booting Ubuntu 10.10 and Arch Linux. It seems that I'll have to do some editing of the grub.cfg file, but I have seen numerous warnings not to do so. After a bit of poking around, I've heard about a script that does the editing for you built in to Linux (or maybe just Ubuntu).
My questions are:
- If the aforementioned script does exist, how do I use it?
- else if it doesn't exist, how do I not directly edit grub.cfg?
View 1 Replies
View Related
Jan 1, 2011
i have an acer aspire one with a 250 gb hdd the hdd is currently partitioned into two parts part 1 - 85 or so gb, has windows installed part 2 - the rest which is currently unallocated. i am trying to install ubuntu so that each has its own section and will dual boot once in the ubuntu installation window, how do i set up the partition to achieve this? i am trying to install ubuntu 10.10 netbook
View 4 Replies
View Related
Jan 24, 2009
I just got a 1.5 tb I want to do a dual boot fedora 10 and vista. I don't have vista now. Can I install fedora 10 on a 200 gig partition and install vista on the rest when I buy it later?
View 3 Replies
View Related
Sep 18, 2009
How to correctly install F11 on the same disk as Windows. I have created the partition but can't tell what F11 install to use to setup as dual boot with Windows XP Pro 64bit.
View 2 Replies
View Related
Dec 6, 2010
Windows 7 is first boot disk. Installed Fedora 13 on second disk from DVD. During installation it did not ask if I wanted dual boot. Fedora installed fine on second disk. Rebooted and only Windows will lood. How to setup to dual boot? Can I modify Windows Boot file? or do I have to install Grub on to sda. How do I do that?
View 2 Replies
View Related
Jun 4, 2010
I have the following PC set up:
Dell 8400 with 3 GB of RAM with 3 160 GB SATA drives:
The first one has Windows XP installed on it.
The second one has been newly formatted and Ubuntu 10.04 has just been installed on it (20 GB / and 6 GB swap) with grub being installed on the first partition and not the master boot record. The remainder will be for storage for Windows.
The third drive is simply storage for Windows.
At this point I am able to boot XP just fine, but I'm not able to boot Linux. I just getting a blinking cursor or the PC just reboots when I choose Linux. I believe I have set up my boot.ini properly using:
C:Bootsectc.lnx="Linux Ubuntu"
After running dd if=/dev/sdc1 of=bootsect.lnx bs=512 count=1 and putting that file in place.
For reference, I don't believe this is a Linux problem, as much as I am simply trying to guide the ntldr to be properly pointed to a place where it can boot Linux. When I go into the bios and disable the first and the third hard drives, grub pops right up and I'm able to boot Linux with no problem, so that piece is fine. I think it's just now trying to get the correct syntax so I can boot Linux without having to disable drives and reenable them.
For kicks I even tried these syntax types in boot.ini:
multi(0)disk(0)rdisk(1)partition(1)="Linux11"
(i.e. 2nd disk, 1st partition ...etc...)
I read many troubleshooting documents on dual booting and so forth but I just can't get this right. For reference, I stated the way XP views my Hard Drives in the intro, which seem to be a different order than Linux sees them, yet I believe I've tried all the combos of settings for this to work (yet clearly have not). I have attached the output of boot_info_script*.sh here: [URL]. Boot Info Script 0.55 dated February 15th, 2010 ..... Devices which don't seem to have a corresponding hard drive.
View 9 Replies
View Related
Oct 11, 2010
I'm trying to setup a dual boot of windows 7 x64 and Ubuntu 10.10 i386. Before I got windows 7 and the new graphics card it ran 9.10 perfectly. If I take the card out (Nvidia 8800 Ultra), it will install fine but when I put the card back in, it crashes. It appears that it just doesn't like the card.
View 3 Replies
View Related
Jan 22, 2011
Howto start an already installed Debian Lenny using setup CD/DVD, for example if GRUB won't to start it?
View 8 Replies
View Related
Jan 2, 2010
Usually I have no problems with linux but with fedora it didnt automatically set up the dual boot with vista. I cant remember how to set up grub to boot vista, how to set this up.
View 1 Replies
View Related
Jun 17, 2010
I need a suggestion on setting up a dual boot menu for my setup. I have two hard drives one with WinXP and a second one with CentOS 5.3 installed. I basically moved the hard drive from another identical machine to this one and so I want to setup a boot menu to access either windows or Linux. CentOS already has grub on it.
What is the simplest method of setting up the dual boot menu? I would like something which is easy to administer which I can just ghost over either the Linux drive or Windows drive or disconnect either and have either boot just fine. I don't ask for much do I?
If I have to go through a little process after ghosting over one or the other drives that would probably be ok. We get updated images for this machine and replace the image on the drives with new images, although Linux shouldn't be reimaged, just windows. So the Linux drive (2nd drive) should not be touched normally.
View 9 Replies
View Related
Feb 17, 2010
I have been running Ubuntu 9.10 and Win XP Professional as a dual boot system, with each OS on its own HDD, smoothly and seamlessly since the release of 9.10. Yesterday one of my kids got a video file from a friend and it had a virus along with it. Long story short, in the process of trying to repair it Windows shuddered it last agonizing breath.
Now I have to re-install Windows because some of the programs the schools make them use require Windows. How do I go about doing this without damaging my Ubuntu installation? Will re-installing on a second drive affect GRUB?
View 9 Replies
View Related
May 2, 2010
I installed Lucid Lynx on a dual boot with a previously installed copy of Windows 7 and everything installed fine via Wubi...but now when I boot up and I get to my Boot Mgr and select Ubuntu I get the following message and can not get past a black screen stating -
Try (hd0,0) EXT2
I have tried to read what others have done to fix this but nothing has worked so far,Also I can still log into Windows 7 just fine, just no Linux...
View 2 Replies
View Related
Mar 20, 2011
(This is for a 100% Clean install)
Q1) I was wondering if it is possible to Dual boot Ubuntu with Windows XP on a 1TB RAID-0 setup ?
Q2) Also, is it possible to create a SWAP partition (for Ubuntu) on a NON RAID-0 HDD ?
Q3) Lastly... I read GRUB2 is the default boot manager... should I use that, or GRUB / Lio ?
I have a total of 3 HDDs on this system:
-- 2x 500GB WDD HDDs (non-advanced format) ... RAID-0 setup
-- 1x 320GB WDD HDD (non RAID setup)
(The non RAID HDD is intended to be a SWAP drive for both XP and Ubuntu = 2 partitions)
I plan on making multiple partitions... and reserve partition space for Ubuntu (of course).
I have the latest version of the LiveCD created already.
Q4) Do I need the Alternate CD for this setup?
I plan on installing XP before Ubuntu.
This is my 1st time dual booting XP with Ubuntu.
I'm using these as my resources:
- [url]
- [url]
Q5) Anything else I should be aware of (possible issues during install)?
Q6) Lastly... is there anything like the AHCI (advanced host controller interface) like in Windows for Ubuntu?
(Since I need a special floppy during Windows Install...) I want to be able to use the Advanced Queuing capabilities of my SATA drives in Ubuntu.
View 4 Replies
View Related
Feb 18, 2010
I'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:
I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.
View 4 Replies
View Related
